ssion List On Behalf Of
Gadi Ben-Avi
Sent: Thursday, August 19, 2021 5:22 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: FTP problem [EXTERNAL]
Hi,
We are in the midst of a DR test.
A user is complaining that they are have problems using ftp.
When the issue the ftp command from the command line in win
resolved via a dns server
at the hot-site or back in your prod location? further are all systems being DR
tested, Z, Open systems, and windows?
Carmen
On Thu, 19 Aug 2021 10:21:55 +, Gadi Ben-Avi wrote:
>Hi,
>We are in the midst of a DR test.
>A user is complaining that they
server
>>
>> settings, or using exactly same as normal?
>>
>> How does SSH perform, if you've got that up and running?
>>
>> Regards
>>
>> -- Original Message --
>>
>> From: "Gadi Ben-Avi" gad...@malam.com
nning?
>
> Regards
>
> -- Original Message --
>
> From: "Gadi Ben-Avi" gad...@malam.com
>
> To: IBM-MAIN@listserv.ua.edu
>
> Sent: 19/08/2021 12:05:53
>
> Subject: Re: FTP problem
>
> > Hi Patrick,
> >
> > We do not have any ft
password?
Does the z13s show any impact to the FTPD address space while the FTP is taking
place?
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Thursday, August 19, 2021 7:07 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: FTP problem
Hi Robert,
We
at up and running?
Regards
-- Original Message --
From: "Gadi Ben-Avi"
To: IBM-MAIN@listserv.ua.edu
Sent: 19/08/2021 12:05:53
Subject: Re: FTP problem
>Hi Patrick,
>We do not have any ftp exits defined.
>CPU perfromace is not a problem.
>If I do tso ftp from
you may find your
delay.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Thursday, August 19, 2021 6:22 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: FTP problem
Hi,
We are in the midst of a DR test.
A user is complaining that they are have problems usi
Hi Patrick,
We do not have any ftp exits defined.
CPU perfromace is not a problem.
If I do tso ftp from tso I get the same problem.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Patrick Loftus
Sent: Thursday, August 19, 2021 1:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Sub
and presses enter...
Where is the password coming from? LDAP? - Check that and you may find your
delay.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Thursday, August 19, 2021 6:22 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: FTP problem
Hi,
We are in
Hi,
We are in the midst of a DR test.
A user is complaining that they are have problems using ftp.
When the issue the ftp command from the command line in windows, they get the
prompt for the user name almost immediately.
Once the user enters the password and presses enter, it takes over a minute
you can buy a few vowels, it might be PERSONAL. 😊
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Wednesday, August 11, 2021 7:15 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Easytrieve Question (silly)
Hi,
I was asked to install Easytrieve and make
Hi,
I was asked to install Easytrieve and make sure it works.
The basic installation went fine, and I'm trying to run sample programs.
Most of the sample programs mention a data file called PRSNL.
Is this file part of the installation? Where would I find it.
Gadi
---
I just ran a job the receives HoldData.
I ran just fine.
Have you checked if there is a firewall or some other security issue?
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Carmen Vitullo
Sent: Wednesday, April 28, 2021 3:54 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Su
If it's just text, creating a csv file shouldn't be too difficult, and Excel
will be able to read it with no problems.
Separate the fields with commas, and if a field has spaces, surround it with ".
Format dates and time as something excel will understand as a date or time.
-Original Message-
Hi,
I am attempting to install a product using Server Pac.
When I run job RESTORE, I get a message that my /tmp filesystem is not large
enough.
I set up the TFS started task that should allow me to extend the temporary file
system.
The jobs says that I need 5814122 kbytes.
I issued the command
The online help has descriptions of all of the messages.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Alexander Huemer
Sent: Tuesday, March 2, 2021 10:17 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Personal Communications error codes
Hi
I was recently researching an
Hi,
I would like users in a group (OPER) to be able to change the password of
users is a specific group (K002).
The ALTUSER command is generated by a REXX program and issued under TSO.
I started off with giving the OPER group READ access to IRR.PWRESET.TREE.K002.
The command ended with RC=4
I th
Hi,
We write SMF to logstreams.
Every day at midnight we copy the data for the previous day to dasd.
Every week we create a weekly smf dataset from the previous weeks daily
datasets.
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Ron
Burg
Sent: Wednesday, Febr
Hi,
Our current configuration consists of:
Production site:
A z15-t02 running z/OS v2.3 and a z13s running z/OS 2.4
Each computer runs a different application and there is no communication
between the two systems.
Both systems connect to the same DS8884 using 4 FICON channels each. The DS8884
has
Hi,
I was asked to investigate a REXX compiler.
I found the IBM REXX Compiler and a product called eXtended Compiler for REXX
from a company called improvIT Software Innovations?.
The main goal is to make REXX programs run faster.
Do these products help with that, or are they just a way to
How about asking SAS.
Start at support.sas.com or send a message to supp...@sas.com
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
David Crayford
Sent: Thursday, January 21, 2021 12:04 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SAS/C++ help
I'm working on a proj
Hi,
I would like to automate some csm (Copy services manager) from z/OS.
I installed csmcli on z/OS, and if I run csmcli.sh from the omvs shell, it
works ok.
I found the TechDoc named 'IBM Copy Services Manager session automation' by
Thomas Luther which has a rexx program that sets up the environ
Hi,
When I got this type of error, it turned out to be a problem with one of our
network security products.
I'm not sure if it was the FireWall or something else.
I would ask the network security team.
Gadi
From: IBM Mainframe Discussion List on behalf of
We replaced CA1 with Control-M/Tape
We've always used Control-M
We still use CA-TPX. There are many replacements: Supersession, Tubes come to
mind.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Elaine Beal
Sent: Wednesday, December 9, 2020 9:07 PM
To: IBM-MAIN@LIS
Newer versions of windows 10 have a tool called Snip & Sketch which allows you
to capture a screen region and then annotate it.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Elaine Beal
Sent: Tuesday, December 1, 2020 7:03 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject:
We also restart CICS every night (at least some regions).
But that happens in the middle of the night (at 3 am, I think).
This was a special case where I wanted to finish as soon as possible.
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Martin Packer
Sent: Su
@LISTSERV.UA.EDU
Subject: Re: System Boost Question
[Default] On 28 Nov 2020 11:02:02 -0800, in bit.listserv.ibm-main
gad...@malam.com (Gadi Ben-Avi) wrote:
>We are to take delivery of a z15-t02.
>I have a question about system boost.
>A few months ago, as part of upgrading CICS, we shut down all of
We are to take delivery of a z15-t02.
I have a question about system boost.
A few months ago, as part of upgrading CICS, we shut down all of our CICS
regions in order to upgrade the CICS SVC.
We are running z/OS v2.3
Could we use SYSTEM boost to make the process of shutting down the CICS region
Behalf Of
Paul Gilmartin
Sent: Thursday, November 19, 2020 3:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Xmitip multi language characters problem
On 2020-11-19, at 01:39:45, Gadi Ben-Avi wrote:
>
> The answer depends on what SMTP server you are running on z/OS.
> Is it SMTP or CSSMTP.
&g
The answer depends on what SMTP server you are running on z/OS.
Is it SMTP or CSSMTP.
For SMTP I think you need to have a file named TCPIPPFX.STANDARD.TCPXLBIN with
the correct translation table.
TCPIPPFX is defined in the DATASETPREFIX parameter in TCPDATA.
For CSSMTP there is a parameter named
source site?
- KB
‐‐‐ Original Message ‐‐‐
On Thursday, November 5, 2020 10:51 AM, Gadi Ben-Avi wrote:
> Hi Everone.
> Thanks for responding.
>
> We 'purchased' a system from another site.
> The jobs that came with the system do not have a CLASS parameter specified
they dont have access to
CLASS=X, then dump the job.
OP: This has been around a long time, and is very mature...
Joe
On Wed, Nov 4, 2020 at 8:20 AM R.S. wrote:
> W dniu 04.11.2020 o 13:10, Gadi Ben-Avi pisze:
> > Hi,
> > I've started looking into JES2 Policies.
> >
Hi,
I've started looking into JES2 Policies.
The current goal is to change a job's class or service class depending on
certain values in the accounting information.
>From reading the manual, it seems that this is possible.
Has anyone done something like this?
Is there a way to debug these polici
Series (With Marna Walle):
https://anchor.fm/marna-walle
Youtube channel: https://www.youtube.com/channel/UCu_65HaYgksbF6Q8SQ4oOvA
From: Gadi Ben-Avi
To: IBM-MAIN@LISTSERV.UA.EDU
Date: 04/11/2020 08:53
Subject:[EXTERNAL] Using accounting information in WLM
classification r
Hi,
I was asked to investigate using accounting information in WLM classification
rules.
I saw that I can use AI as the type.
What does the value of name look like?
Are there any pitfalls I should be aware of?
We are running z/OS v2.4
Thanks
Gadi
---
It's still there.
Get the full file from ftp://public.dhe.ibm.com/s390/holddata/full.txt or
ftp://public.dhe.ibm.com/s390/holddata/full.bin
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Giliad Wilf
Sent: Sunday, November 1, 2020 11:51 AM
To: IBM-MAIN@LISTSERV
: HSM problem
What values are assigned to the CDSVERSIONBACKUP sub-parameters? Are they the
same as the SYSUT2 DD statement in your IEBGENER job?
> -Original Message-
> From: IBM Mainframe Discussion List On
> Behalf Of Gadi Ben-Avi
> Sent: Thursday, October 15, 2020 1:04
Hi,
We're installing HSM on a new z/OS v2.4 partition.
HSM starts and seems to be OK.
When I issue the F HSM,BACKVOL CDS command, I get:
ARC0744E MCDS COULD NOT BE BACKED UP, RC=0024, 677
ARC0744E (CONT.) REAS=. MIGRATION, BACKUP, FRBACKUP, DUMP, AND
ARC0744E (CONT.) RECYCLE HELD.
RC 24 says
and IEASYMxx -- but I know of no way to eliminate 00 as a
base. Normally 0B would have all the needed over-ride values for 00 making it
effectively the same as "only 0B" :)
On Tue, Oct 6, 2020 at 3:18 PM Gadi Ben-Avi wrote:
> HI,
> The output from D IPLINFO,SYSP is
> IEE25
Hi,
During the IPL, The message:
IEA008I SYSTEM PARMS FOLLOW FOR z/OS 02.03.00 HBB77B0
IEASYS0B
IEASYS00
Was displayed.
I then see
IEE252I MEMBER IEASYS00 FOUND IN SYS1.PARMLIB
IEA325I IEASYS00 PARAMETER LIS
HI,
The output from D IPLINFO,SYSP is
IEE255I SYSTEM PARAMETER 'SYSP': (0B,00)
I would like it to be only 0B
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Peter Relson
Sent: Sunday, October 4, 2020 4:46 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IEASYS probl
* *Web**: www.Securiteam.co.il **|*
On Sat, Oct 3, 2020 at 9:55 PM Gadi Ben-Avi wrote:
> HI,
>
> I went into work this evening to IPL our production LPAR's
>
> When I IPL's one system, it used IEASYS00 instead of the system specific
> IEASYS0B.
>
> The LOAD member for the LPAR s
HI,
I went into work this evening to IPL our production LPAR's
When I IPL's one system, it used IEASYS00 instead of the system specific
IEASYS0B.
The LOAD member for the LPAR says
SYSPARM 0B.
The only thing that has changed recently is that we started using IEASYM for
the first time ever.
Because that is how they built the process
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Bill Giannelli
Sent: Thursday, September 17, 2020 1:43 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SMPe ptfs download to USS
When I order software maintenance and download it, why
: Re: Synchronizing VTL VOLCAT and TMS
IDCAMS
CREATE VOLENT(NAME(Vvolser) LOC(library) MTYPE(mediatype) LIBNAME(libname)
UATTR(scratch/private)
On Tue, 8 Sep 2020 at 17:15, Gadi Ben-Avi wrote:
> Hi,
> We have the following situation:
> Virtual volumes exist in the VTL (TS7760) using th
Hi,
We have the following situation:
Virtual volumes exist in the VTL (TS7760) using the correct category for a
specific LPAR.
Some are in category 008F and some in 0082
The same volumes are defined in the TMS (Control-M/Tape in this case).
The volumes are not defined in the VOLCAT.
How can I eith
lt;
> dspiegel...@hotmail.com>:
>
> > Shkoyach
> >
> > On 2020-08-02 07:25, Itschak Mugzach wrote:
> > > You need to use this or wright an assembler program to execute a
> > > third party check on the resource in question. Easier in rexx with
>
t: Re: Query ESM from REXX
Look at IRRXUTIL
ITschak
בתאריך יום א׳, 2 באוג׳ 2020, 14:06, מאת Gadi Ben-Avi :
> Hi,
> Does anyone know of a way to query an ESM (RACF in this case) from a
> REXX program running under TSO/E and ISPF?
> We are currently at z/OS v2.2.
>
> I would
Hi,
Does anyone know of a way to query an ESM (RACF in this case) from a REXX
program running under TSO/E and ISPF?
We are currently at z/OS v2.2.
I would like to know if a user has a certain access level to a resource in
FACILITY.
Thanks
Gadi
-
**| *
*|* *Email**: i_mugz...@securiteam.co.il **|* *Mob**: +972 522 986404 **|*
*Skype**: ItschakMugzach **|* *Web**: www.Securiteam.co.il **|*
On Thu, Jul 30, 2020 at 9:14 AM Gadi Ben-Avi wrote:
> Hi,
>
> I was told to develop an ISPF application.
> It's been a long time since I
Hi,
I was told to develop an ISPF application.
It's been a long time since I did this, so I'm having some issues.
Whenever I change a panel definition, I have to logoff and logon for the
updated definition to show.
Is there a way to have ISPF use the updated definition without logging off and
o
Hi,
How can I find out, using a batch job, the TS7760 cache utilization?
Thanks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi,
I was asked to make sure that the mainframes are using the same time source as
the rest of the computers on our network.
I know what the NTP servers are in our network.
In the HMC, I found 'Customize Console Date/Time'
I added the NTP servers to the screen, and they seem to have been accepte
on target system. Much easier and less error-prone.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 14.07.2020 o 12:06, Gadi Ben-Avi pisze:
> HI,
> I have to copy extended format (PS-E and VS-E) datasets between partitions.
> The partitions share DASD but do not share anything else.
> T
HI,
I have to copy extended format (PS-E and VS-E) datasets between partitions.
The partitions share DASD but do not share anything else.
They have different SMS configurations.
The same Storage Group is defined in both partitions, but each partition has
different volumes.
I've been copying datas
The output looked OK to me.
I was also able to restore a file
Gadi Ben-Avi
z/OS systems Programmer
Malam Systems
Jerusalem, Israel
On Mon, Jul 13, 2020 at 4:09 PM +0300, "Richard Marchant"
mailto:marchinga...@gmail.com>> wrote:
Gadi,
Did you FIXCDS the "A" and
Sent: Monday, July 13, 2020 3:46 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Changing the volser of an HSM ML1 volume
Gadi,
Please execute the following command:
*HSEND AUDIT MEDCTL VOLUMES(ML1000) FIX*
Richard Marchant
Johannesburg
On Mon, Jul 13, 2020 at 2:27 PM Gadi Ben-Avi wrote:
: Changing the volser of an HSM ML1 volume
Gadi,
Try running the FREEVOL again and then post the DFHSM log of the FREEVOL output.
Richard Marchant
Johannesburg
On Mon, Jul 13, 2020 at 12:19 PM Gadi Ben-Avi wrote:
> Hi Again,
> The VTOC records are newish. There are some from today and som
a few Daily Space Management Cycles. They are vtoc copies
used in volume recovery.
You can also (with minor risk), just delete them.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Monday, July 13, 2020 3:20 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subjec
.
HTH
Richard Marchant
Johannesburg
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Gadi Ben-Avi
Sent: Monday, July 13, 2020 10:55 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Changing the volser of an HSM ML1 volume
All of the VTOC files that were not moved
@LISTSERV.UA.EDU
Subject: Re: Changing the volser of an HSM ML1 volume
Gadi,
FREEVOL should move these files if they are good.
Check they are active files.
Richard Marchant
Johannesburg
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Gadi Ben-Avi
Sent
: Monday, July 13, 2020 10:24 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Changing the volser of an HSM ML1 volume
Gadi,
HSM should move all the files.
Richard Marchant
Johannesburg
On Mon, Jul 13, 2020 at 8:43 AM Gadi Ben-Avi wrote:
> Thanks
> Will HSM move the files already on the old volu
On Mon, Jul 13, 2020 at 8:43 AM Gadi Ben-Avi wrote:
> Thanks
> Will HSM move the files already on the old volume, or do I have to do
> it myself?
>
> Gadi
>
> -Original Message-
> From: IBM Mainframe Discussion List On
> Behalf Of Richard Marchant
> Sent:
HTH
Richard Marchant
Johannesburg
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Gadi Ben-Avi
Sent: Monday, July 13, 2020 6:55 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Changing the volser of an HSM ML1 volume
Hi,
I need to change the
Hi,
I need to change the name of a HSM ML1 volume.
The volume only contains VTOC files created by backups.
Can I just create a new volume, define it to hsm and move the files to it?
Gadi
--
For IBM-MAIN subscribe / signoff / arc
The chmount command can change a file system from Read Only to Read/Write and
back.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Israel Wagshal
Sent: Sunday, July 12, 2020 11:50 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Is /usr/lpp reserved solely for IBM produ
Hi,
When I ordered z/OS v2.4, I only ordered the 64 bit version of Java.
When we tried to start PFA, it failed. A quick search showed that PFA requires
the 31 bit version of java.
I ordered it using shopzseries.
The resulting package was over 13GB.
It looks like I have the base version and over 50
Hi,
Is it possible to define more than one HMCS console for an LPAR?
We are currently in the early stages of z/OS v2.4 installation.
Since were working from home, it would help if we could have more than one HMCS
consoles.
We are using a z13s.
Thanks
Gadi
I found this:
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.4.0/com.ibm.zos.v2r4.izso100/izso100_diagnosisservice.htm
It looks like the real information is in GLZ messages.
I don't have z/OS v2.4 running, so I can't really check.
Gadi
-Original Message-
From: IBM Mainframe Discus
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
David Geib
Sent: Wednesday, June 3, 2020 3:51 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Extending the /tmp file system
Hello Gadi - Only a TFS running as a colony address space can be extended - see
the chapt
Hi,
Is it possible to extend the /tmp file system without an IPL?
It's currently defined as:
MOUNT FILESYSTEM('/tmp')
MOUNTPOINT('/tmp')
TYPE(TFS)
MODE(RDWR)
PARM('-s 100')
We are running z/OS v2.2
Thanks
Gadi
--
For IBM-
Hi Brian,
When building a sysplex using CTC's, each LPAR mist have connectivity to all of
the other LPARS.
If you have more than two LPARS, it gets complicated very fast.
I've always had to get help from IBM for defining the CTC's in HCD.
Once you have to connectivity defined, the rest is fairl
: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Move volcat to non sms volume
By using the VOLUMES keyword on the IMPORT, and specifying a NON-SMS managed
volume...
https://www.ibm.com/support/pages/how-move-volcat-new-volume
Joe
On Sun, May 24, 2020 at 2:30 AM Gadi Ben-Avi wrote:
> Hi,
> Our v
Hi,
Our volcat (SYS1.VOLCAT.VGENERAL) was allocated on an SMS managed volume.
We would like to move it to a Non SMS managed volume.
The way I found was to export it and then import.
How do I tell IMPORT to allocate it on a non SMS managed volume, and not on the
storage class it was exported from?
Hi,
I would like to write a REXX program that will issue the command to activate
the SMS Configuration, and then wait until the message saying that the
configuration has been activated is issued.
I haven't been able to find examples that do that.
Does anyone have an example?
The program would
Hi,
Does anyone know of a way to activate an SMS configuration in batch?
I know I can issue the SETSMS SCDS(xx) command in batch, but I am long for a
way that will wait until the activation is complete before continuing to the
next step.
We are running z/OS v2.2
Thanks
Gadi
Hi,
We have the following problem
I job runs IDCAMS that delete and redefines a VSAM KSDS file.
The next step uses a user program to send a command to CICS to open file file.
In one partition this works fine.
In another partition we get:
DFHFC0952 CICSTOR8
DYNAMIC ALLOCATION OF NON-RLS FILE LMFVP
They are users
They make mistakes :-)
I will check the ALLOC parameters.
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Sri
h Kolusu
Sent: Wednesday, January 29, 2020 3:56 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: DFSort question
>>The output dataset exis
Hi,
User ran a job the uses DFSort to copy a dataset.
The output dataset is on tape.
The output dataset existed on tape before the job run.
Message IGD17101I was issued saying that there already was a dataset with that
name.
The job ended with condition code 0.
Is this a DFSort behavior?
If yes,
Hi,
SDSF allocates two SYSOUT files named HSFLOG and HSFTRACE.
How do I change the SYSOUT Class these files use?
I am running z/OS v2.3
Gadi
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists.
s
On 2019-12-30, at 22:51:40, Gadi Ben-Avi wrote:
>
> I changed TZ to the value you suggested, and when I issue the time command I
> get UTC.
>
"time"? Try "date" instead.
Troubleshooting:
o Run the commands in the
Hi,
I've just been informed that we will be getting a new DS8884 to replace an
older DS8884.
Is there a way to export the configuration from the older DS8884 and copy it to
the new one?
Thanks
Gadi
--
For IBM-MAIN subscribe /
based tasks
On Mon, 30 Dec 2019 07:09:19 +, Gadi Ben-Avi wrote:
>I know, bit that requires editing a file.
>I want something that can be done using automation.
>
A better approach, extracting information from Linux, which does it right:
503 $ tail -1 /usr/share/zoneinfo/Asia
Mon, 30 Dec 2019 07:09:19 +, Gadi Ben-Avi wrote:
>I know, bit that requires editing a file.
>I want something that can be done using automation.
>
A better approach, extracting information from Linux, which does it right:
503 $ tail -1 /usr/share/zoneinfo/Asia/Tel_Aviv
IST-2I
I'm in Israel.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Paul Gilmartin
Sent: Monday, December 30, 2019 9:03 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Chaning time zone for Unix based tasks
On Mon, 30 Dec 2019 06:26:57 +0000, Gadi Ben-Avi wrote:
Unix based tasks
in /etc/profile set the variable TZ to UTC+2 (setenv TZ "UTC2EDT")
ITschak
On Mon, Dec 30, 2019 at 8:27 AM Gadi Ben-Avi wrote:
> Hi,
> Twice a year, we change the time zone the system is using with the SET
> TIMEZONE command.
> This does not affect ta
Hi,
Twice a year, we change the time zone the system is using with the SET TIMEZONE
command.
This does not affect tasks running under Unix System Services.
Is there a way to make these tasks use the z/OS system Time Zone?
We are using z/OS v2.2 and z/OS v2.3
Thanks
Gadi
--
special site commands. And, those differ on the z/VSE site
depending on which TCP/IP product you have there.
Tony Thigpen
Gadi Ben-Avi wrote on 12/4/19 8:16 AM:
> Hi,
> We need to transfer files from z/OS to VSE.
> The files are large, variable and have long record lengths.
> The f
directly from z/OS to z/VSE, but with variable records,
there is some special site commands. And, those differ on the z/VSE site
depending on which TCP/IP product you have there.
Tony Thigpen
Gadi Ben-Avi wrote on 12/4/19 8:16 AM:
> Hi,
> We need to transfer files from z/OS to VSE.
>
Hi,
We need to transfer files from z/OS to VSE.
The files are large, variable and have long record lengths.
The files will be transferred using open systems as an intermediate.
If I was transferring to another z/OS system. I would use XMIT or AMATERSE to
create a transportable file.
Does VSE hav
http://www-01.ibm.com/common/ssi/ShowDoc.wss?docURL=/common/ssi/rep_ca/9/877/ENUSZG19-0099/index.html&lang=en&request_locale=en
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Peter
Sent: Sunday, October 27, 2019 7:39 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: TS7770 of
uot; - John Wooden
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Thursday, October 10, 2019 7:22 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Saving job output
Thanks Lionel.
Can the jobname include wildcards?
What happens if there is more tha
haracter than your reputation. Character is what you
are, reputation merely what others think you are." - John Wooden
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Thursday, October 10, 2019 5:55 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Savi
I know that,
But if you have a job with many output files, or you want the output of many
jobs, this becomes tedious. You can also make mistakes.
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Steve Smith
Sent: Thursday, October 10, 2019 2:41 PM
To: IBM-MAIN@LI
x" that I gave in Phoenix
Rob Scott
Rocket Software
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Gadi Ben-Avi
Sent: Thursday, October 10, 2019 11:55 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Saving job output
Hi,
Every now and again, I have to send the output
Hi,
Every now and again, I have to send the output from a job or started task to
support.
Saving all of the output is simple using SDSF's XDC command, but that saves all
of the output to one file.
It's much easier to deal with the individual spool files.
Does anyone have a utility that can split
Nice
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Parwez Hamid
Sent: Thursday, September 12, 2019 8:05 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Useful Tool for 'high' level comparison of the between the z15/z14/z13
https://www.ibm.com/it-infrastructure/resources/t
List On
> Behalf Of Gibney, Dave
> Sent: Wednesday, September 11, 2019 10:09 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: HSM question
>
> MGMTCLAS won't matter for Non-SMS datasets
>
> > -Original Message-----
> > From: IBM Mainframe Discussion Lis
n-SMS datasets
> -Original Message-
> From: IBM Mainframe Discussion List On
> Behalf Of Gadi Ben-Avi
> Sent: Tuesday, September 10, 2019 11:39 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: HSM question
>
> Hi,
> I wanted to restore a PDS backed up by HSM.
> Whe
Hi,
I wanted to restore a PDS backed up by HSM.
When I looked, I only found one backup version of the PDS.
When I looked through the HSM logs, I found that it was backed up many times.
The PDS is on a NON-SMS volume.
The addvol statement for the volume is:
ADDVOL vv UNIT(3390) PRIMARY(AUTODUMP
101 - 200 of 375 matches
Mail list logo
