hi Indraneel,
How do i install SVGA server Will i get it at the intel site?
Regards,
shafi
Indraneel Majumdar wrote:
You get 64K or whatever probably because you're using VGA16 server.
Install SVGA server and use xf86config to set up your card (yes it's text
mode only). Right when your
On Wed, 30 Aug 2000, Sarcar, Shourya (MED) wrote:
multiple POPs. But ,err.umm.. i dunno.. is yahoo oiffering POP servers
^^
Not on their india based server, but it does so on their international
server
sreangsu
Hi,
kapil sharma typed:
I want to buy a CD writer. I want to know which make will work on Linux
well. I am using redhat linux6.2.
Any CD Writer which follows the ATAPI protocol (which is basically
everything you get in the market now) will work with Linux. As with
CDROM drives, there are no
Thanks, will try the same again, and ask for more help. (I'm running
SuSE-6.4 with the Yast updated from SuSE site. Also update via ftp is not
working. Yast cannot take a http proxy port for ftp requests (something
than wget or lynx can do.))
\Indraneel
On Wed, 30 Aug 2000, Robin Chatterjee
Ashis Kumar Mal wrote:
Recently my RHL-6.0 m/c got crashed due to power failures. Now while
running fsck /dev/hda5, (after maximal mount count) it complains
error reading block 70921 (Attempt to read block from filesystem resulted
in short read) Ignore error(y/n) When I say yes, it boots up
I don't know how to do it without hacking. If you have access to the code
try the following. Download my dnacgr program from my site (it's very
small). Open the dnacgr.c. There's a small piece of contributed code in
that. Take it out and modify it and put it in your program source at the
Hi
Linux does have USB support. you might have to recompile the kernel to
include USB kernel support
regards,
parag mehta
Yunus Shaikh writes:
Do Linux have USB Support ? . i have a web cam (usb) and want to make it
work on linux . any links please leme know
yunus
I forgot what I did a long time back but...
Get the agpgart module from Intel site. Get the SVGA server from your CD,
or your distro's site (SuSE has XF_810 (maybe now integrated with the
standard XF_SVGA), maybe RedHat too has) or from xfree86.org .
(best is to get the whole XFree-4.0 from
On 30 Aug 00, at 11:15, Sarcar, Shourya (MED) wrote:
gimp
Gimp for a terminal screenshot?!!
[o] I wanted to take a screenshot of a console( _not_ a screen
[o]running X) and store the results in a jpg file. Any idea,
[o]how to proceed
[o]abt it?
I am not sure myself, but you could
Hi
Yahoo does offer. pop.mail.yahoo.com and smtp.mail.yahoo.com From home I check,
two yahoo and three softhome accouts plus my VSNL accounts.
But I agree with you. In many senses kmail sucks. I basically use it to
download and dump the mails. That's all
Bye
Shridhar
On Wed, 30 Aug
On Wed, 30 Aug 2000, Mrinal Devadas (OCS-BLRRO-AVS) wrote:
or u can create a file in the users home dir call .xinitrc there all u need
is a single command exec kde, exec enlightenment or exec wmaker. u can also
have multiple entries and hash out all except the one GUI u will be using.
Indraneel Majumdar wrote:
On Tue, 29 Aug 2000 [EMAIL PROTECTED] wrote:
Aug 29 19:19:00 btserv pppd[1528]: Problem: all had bit 7 set to 0
This seems to be a common problem with telephone lines, retry for
sufficient times and see.
But when we use wvdial to connect there is no such error
One more type of memory leak is allocate memory, and redirect the pointer in
which it's accocated, to something else...
e.g.
{
int i;j;
int *a,*b;
a=(int *)malloc(100*sizeof(int));
if(!a)printf("\n No memory.. ");
a=i;
}
Bye
Shridhar
On Wed, 30 Aug
kapil sharma wrote:
I want to buy a CD writer. I want to know which make will work on Linux
well. I am using redhat linux6.2.
All MMC compliant cd writers are supported (that includes most of the
latest IDE/ATAPI and SCSI writers) USB cd writers are not well supported
yet. For a detailed
I've faced similar problems with Ethnet before. The problem appears and
disappears by itself. Most likely a problem with the their servers or
the phone lines. Try again after a few hours. Verify if the server is up
by using minicom to login ,and starting pppd by hand.
Vasudevan. K.S wrote:
hi,
No, this is a BIW2B motherboard from Procomp.
- Original Message -
From: Robin Chatterjee [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, August 30, 2000 10:01 AM
Subject: Re: [LIH] BIW2B motherboard and Red Hat 6.2
check www.exocore.com/linux/i810
Cheerio
Robin
hi !
Earlier I had suggested GIMP, but as someone correctly pointed out,
I underparsed your mail :|
Sorry.
Here is an inelegant alternative. I am sure this will _not_ work ;)
Output to a file using typescript or std redirection [in tty
console]
Open the dumped
use xwd(XWindow Dump) and then open it with xv or any image viewer and
save it in jpg.
On Wed, 30 Aug 2000, Atul Mehta wrote:
Date: Wed, 30 Aug 2000 09:17:17 +0530
From: Atul Mehta [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Linux India Help [EMAIL PROTECTED]
Subject: [LIH]
Hi,
I installed the 4.1 version of XFree from xfree86.org and i am facing some
problems in running X. I am attaching the log file also. Please advice..
Thanks in advice guys..
Regards,
shafi
Indraneel Majumdar wrote:
I forgot what I did a long time back but...
Get the agpgart module from
hello all,
i have an INTEX Motorola SM56 PCI speakerphone 56 kbps internal modem in
my PC connected to COM4.. no drivers for linux/unix in the CD
provided.. the modem is not connecting to the net and kppp gives modem
busy on com4.
how do i install the modem in linux.. any drivers reqd..?
pl.
Your server seems to be using VGA server. Maybe your /var/X11R6/bin/X link
is not correct? Did you run xf86config?
\Indraneel
On Wed, 30 Aug 2000, A Shafi Mani wrote:
Hi,
I installed the 4.1 version of XFree from xfree86.org and i am facing some
problems in running X. I am attaching the
Hi,
How do I catch the startx logs,
it moves out too fast to read!?
Rgds,
-loki
--
An alpha version of a web based tool to manage
your subscription with this mailing list is at
http://lists.linux-india.org/cgi-bin/mj_wwwusr
Hi,
Lokesh Babu M. typed:
How do I catch the startx logs,
it moves out too fast to read!?
startx startx.log
Then the messages will land up in startx.log, and you can read it at
your leisure. :-)
--
Mrinal Kalakrishnan [EMAIL PROTECTED] http://mrinal.dhs.org/
Linux 2.2.12-20 ||
Is that 'startx 2startx.log'. Those logs are printed on stderr...
Bye
Shridhar
On Wed, 30 Aug 2000, you wrote:
startx startx.log
Then the messages will land up in startx.log, and you can read it at
your leisure. :-)
--
LIH is all for
Shridhar Daithankar forced the electrons to say:
Is that 'startx 2startx.log'. Those logs are printed on stderr...
will redirect all descriptors... both stdout and stderr, in this case.
Binand
--
The prompt for all occasions:
export PS1="F:\$(pwd | tr '/[a-z]' '\134\134[A-Z]') "
Hi,
Shridhar Daithankar typed:
Is that 'startx 2startx.log'. Those logs are printed on stderr...
I think captures stdout and stderr.
--
Mrinal Kalakrishnan [EMAIL PROTECTED] http://mrinal.dhs.org/
Linux 2.2.12-20 || PGP:B1E86F5B || Mutt 1.3.7i (2000-08-03) || VIM 5.6
--
/*
* We used to
On Wed, 30 Aug 2000, Vivek Sharma wrote:
use xwd(XWindow Dump) and then open it with xv or any image viewer and
save it in jpg.
again the same mistake. X is out of scene, the original mail required a
console application for a console application :)
Anyway its settled, or isnt it?
Ashis Kumar Mal wrote:
Recently my RHL-6.0 m/c got crashed due to power failures. Now while
running fsck /dev/hda5, (after maximal mount count) it complains
error reading block 70921 (Attempt to read block from filesystem resulted
in short read) Ignore error(y/n) When I say yes, it boots up
Hi,
I have a problem with my monitor when I type startx or X it begins to get
into Xwindows and then the screen of my monitor goes blank and keeps
blinking I tried to edit the XF86Config file but with no luck.I tried
lower resolutions but it did not work.I doubt the display has changed to
because
On Wed, 30 Aug 2000, Pradeep Sangunni wrote:
Hi,
I have a problem with my monitor when I type startx or X it begins to get
into Xwindows and then the screen of my monitor goes blank and keeps
blinking I tried to edit the XF86Config file but with no luck.I tried
lower resolutions but it did
Put the addresses of all clients in /etc/hosts
e.g.
192.168.1.5 xyz.abc.comabc
(abc.com is the domain and abc is the machine name)
try.. It worked for me.
sudhir
--
The mailing list archives are available at
If i have all clients running Linux too, will either
or both of these packages still work??
Vicky
--- Robin Chatterjee [EMAIL PROTECTED] wrote:
do a search for linneighbourhood
Its pretty good
also try gnomba
Derryl Madtha wrote:
Is there anything like network neighbourhood in
I *think* com4 and com2 use the same irq. Try using
com2 (ttyS1) for a change...
Vicky
--- George Easaw [EMAIL PROTECTED] wrote:
hello all,
i have an INTEX Motorola SM56 PCI speakerphone 56
kbps internal modem in
my PC connected to COM4.. no drivers for linux/unix
in the CD
provided..
X :1 /tmp/X.log 21
-- Raju
"Lokesh" == Lokesh Babu M [EMAIL PROTECTED] writes:
Lokesh Hi, How do I catch the startx logs, it moves out too fast
Lokesh to read!? Rgds, -loki
--
LIH is all for free speech. But it was created
for a purpose.
On Tue, Aug 29, 2000 at 07:28:45PM +0530, [EMAIL PROTECTED] wrote:
Date: Tue, 29 Aug 2000 19:28:45 +0530 (IST)
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [LIH] pppd - The 7 bit problem
Reply-To: [EMAIL PROTECTED]
Hello All,
I have a mail account with Satyam. their IP is
Hi
Is it possible to keep track of all the mails which are leaving the mail
server( running on Sendmail) to the outside world for the security of the
company. All the mails( copy af mail of all the individual's) leaving the
mailserver have to be dumped in one particular directory.
Regards
Hi,
This is a strange problem... I have gnozip.tar , which when
extracted with tar -xf gives errors saying the file is not in tar
archieve format, etc..,But from mc or kfm the file is opening fine(i.e
showing the contents of the archive) ?
Any Suggestions?
Thanks in advance
Kaushik
P.S-- Pl
hi all.
Is there any way i can use my hsp56 micromodem with linux red hat
5.6...
Also, I have ESS allegro-I sound integrated IC with OSS(open sound
) driver. What player i can use for my MP3s.
--manish
--
An alpha version of a web
On Thu, Aug 31, 2000 at 03:08:57AM +0530, SEN wrote:
Hi,
P.S-- Pl give the url if anybody has managed to get the rpm
version.
RPM of gnozip is at
http://web.tiscalinet.it/idranet/download/
Sunil
--
Sunil
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Aug 31, 2000, the greycells of msk expressed :
Hi
Is it possible to keep track of all the mails which are leaving the mail
server( running on Sendmail) to the outside world for the security of the
company. All the mails( copy af mail of
At 03:10 31/08/00 +0530, you wrote:
On Thu, Aug 31, 2000 at 03:08:57AM +0530, SEN wrote:
Hi,
P.S-- Pl give the url if anybody has managed to get the rpm
version.
RPM of gnozip is at
http://web.tiscalinet.it/idranet/download/
Alternativly you can try out LinZip available
Hi,
I have sis620 inbuilt display card and Samtron 45bn
Monitor(14"). During installing Linux6.2, I specified
sis620 card but there is no Samtron 45Bn monitor in
the list. I specified samsung15le. Now there is no
display.
Can anyone help???
regards
Pinku
Hi
File-Settings-Network-Add Pop account- Fill in the entry...
Note on the first dialog page, what you fill i.e. smtp server and email address are
used for sending
mails. Even if Kmail supports multiple pop accounts, all outgoing mails are still
routed thr. one
address. You can not have a
Search for Networks administrators guide, user reference guide in /usr/doc. It's
already there
on your machine.
For XFree864.0, www.xfree86.org
For Kernel2.4, www.kernel.org
HTH
Bye
Shridhar
Mohit Khanna wrote:
hello everybody,
Are there any good books/magazines on RH Linux 6.2
If it's winmodem, check www.linmodem.org and best of luck.
For playing MP3, you have xmms from your RedHat CD or try freeamp from
www.freeamp.org
Bye
Shridhar
Manish Handa wrote:
Is there any way i can use my hsp56 micromodem with linux red hat
5.6...
. What player i can use for
Fill in the exact monitor frequencies in /etc/X11/XF86Config.
Bye
Shridhar
Pinku Hussain wrote:
--
. I specified samsung15le. Now there is no
display.
--
The mailing list archives are
Hello:
IIRC, Vasnet is a Managalore based ISP. I wonder why an ISP would want
to do things like this.
-- Shanu
Binand Raj S. saw fit to inform LIH that:
you are invading the privacy of your users by doing that. I am not sure
whether I should be helping you to do that.
--
not unless you configure samba on all of them... otherwise I guess what
you need is nis , anyone else can tell us more ?
Cheerio
Robin
Vicky Plaha wrote:
If i have all clients running Linux too, will either
or both of these packages still work??
Vicky
--- Robin Chatterjee [EMAIL
On Thu, 31 Aug 2000, Shridhar Daithankar wrote:
Fill in the exact monitor frequencies in /etc/X11/XF86Config.
by entering custom configuration..
george..
Pinku Hussain wrote:
--
. I specified samsung15le. Now there is no
Shanker Balan [Thu, Aug 31, 2000 at 10:59:08AM +0530]:
IIRC, Vasnet is a Managalore based ISP. I wonder why an ISP would want
to do things like this.
Maybe they want to go to jail? Invasion of privacy and such.
--
Suresh Ramasubramanian + [EMAIL PROTECTED]
[EMAIL PROTECTED] +
[Other distributions with ntop are probably also vulnerable -- Raju]
This is an RFC 1153 digest.
(1 message)
--
Return-Path: [EMAIL PROTECTED]
Received: from localhost (IDENT:raju@localhost [127.0.0.1])
by
[Local root exploit. Please upgrade immediately -- Raju]
This is an RFC 1153 digest.
(1 message)
--
Approved-By: [EMAIL PROTECTED]
Delivered-To: [EMAIL PROTECTED]
Received: from securityfocus.com (mail.securityfocus.com
Hi,
Atul Mehta typed:
I wanted to take a screenshot of a console( _not_ a screen
running X) and store the results in a jpg file. Any idea, how to proceed
abt it?
I'm not sure if you'll be able to do this. You can run it in an xterm
with font vga (xterm -bg black -fg white -fn vga) and
53 matches
Mail list logo