Re: [Linux-PowerEdge] [E] Re: replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Cameron Smith
In regard to: Re: [Linux-PowerEdge] [E] Re: replacing a failed hard > drive...: > > > On 08/10/2017 05:49 PM, Tim Mooney wrote: > > >> The particular system that has the failed drive happens to not be at the > >> 2.x release for iDRAC 7. > >> > >> We're going to schedule an outage for this weekend

Re: [Linux-PowerEdge] [E] Re: replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Tim Mooney
In regard to: Re: [Linux-PowerEdge] [E] Re: replacing a failed hard drive...: > On 08/10/2017 05:49 PM, Tim Mooney wrote: >> The particular system that has the failed drive happens to not be at the >> 2.x release for iDRAC 7. >> >> We're going to schedule an outage for this weekend and remedy

Re: [Linux-PowerEdge] [E] Re: replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Robert Jacobson
On 8/10/2017 5:03 PM, Patrick Boutilier wrote: > > Shouldn't need any downtime. Just download and run > https://downloads.dell.com/FOLDER04020316M/1/iDRAC-with-Lifecycle-Controller_Firmware_XTPX4_LN_2.41.40.40_A00.BIN You can also upload the windows binary updater (e.g.

Re: [Linux-PowerEdge] [E] Re: replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Patrick Boutilier
On 08/10/2017 05:49 PM, Tim Mooney wrote: In regard to: RE: [E] Re: [Linux-PowerEdge] replacing a failed hard drive...: If you're not seeing that function in the iDRAC, make sure you are running the latest version. I'm currently running firmware version 2.41.40.40 You're right, it is a

Re: [Linux-PowerEdge] [E] Re: replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Kingston, Scott J
Tim, If you're not seeing that function in the iDRAC, make sure you are running the latest version. I'm currently running firmware version 2.41.40.40 Best Regards, Scott -Original Message- From: linux-poweredge-boun...@dell.com [mailto:linux-poweredge-boun...@dell.com] On Behalf Of

Re: [Linux-PowerEdge] replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Tim Mooney
In regard to: Re: [Linux-PowerEdge] replacing a failed hard drive with PERC...: > Does the H710 support HBA mode? I thought it wasn't until the PERC9 series > that HBA mode was supported. I'm fairly certain it's in HBA mode. It reports "User Mode" in the iDRAC 7 web interface, when looking at

Re: [Linux-PowerEdge] [E] replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Tim Mooney
In regard to: RE: [E] [Linux-PowerEdge] replacing a failed hard drive with...: > Without having OMSA installed on the server, I believe that you have 3 > options to recreate the vdisk. You can either use the iDRAC and go to > the Storage > Virtual Disks and section and select the Create tab. >

Re: [Linux-PowerEdge] replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Artit Jirapatnakul
Hi, Does the H710 support HBA mode? I thought it wasn't until the PERC9 series that HBA mode was supported. If that's the case, you probably just have to create a RAID0 virtual disk with the single drive. I guess you could confirm by seeing if you have any other virtual disks listed in the

Re: [Linux-PowerEdge] [E] replacing a failed hard drive with PERC HBA mode

2017-08-10 Thread Kingston, Scott J
Tim, Without having OMSA installed on the server, I believe that you have 3 options to recreate the vdisk. You can either use the iDRAC and go to the Storage > Virtual Disks and section and select the Create tab. This page should allow you to create the vdisk. The other option is to go in

Re: [Linux-PowerEdge] Enough contiguous physical memory is not available to perform the BIOS update running under, this Operating System.

2017-08-10 Thread john
Just had this same issue with the latest SUU for R710. Any update on fixing this bug? Server is out of warranty. Thanks, John On Thu, 8 Jun 2017, sash...@dell.com wrote: > Date: Thu, 8 Jun 2017 07:50:08 + > From: sash...@dell.com > To: linux-powere...@lists.us.dell.com > Subject: Re: