From: Krzysztof Adamski
OrangePi Plus board has two leds - green ("pwr") and red ("status")
and two switches ("sw4" and "sw2"). This patch describes them in
devicetree.
Signed-off-by: Krzysztof Adamski
Signed-off-by: Hans de Goede
---
Changes in v6 (hdegoede):
-Merge leds and r_leds nodes into
Hi,
On 20-03-16 17:05, Chen-Yu Tsai wrote:
Hi,
On Mon, Mar 21, 2016 at 12:00 AM, Hans de Goede wrote:
Hi Maxime and Chen-Yu,
Here is a series with various improvements for the Orangepi Plus dts.
Some (most) of these patches have been submitted before, esp. the USB
ones have multiple revision
- Do a clean shutdown / exit(0) after printing usage help,
instead of continuing execution. This avoids the "ERROR:
Allwinner USB FEL device not found!" when doing a plain
./sunxi-fel without any arguments.
- Convert C++ style comments for uniform coding style.
Signed-off-by: Bernhard Nortma
Hi,
On Mon, Mar 21, 2016 at 12:00 AM, Hans de Goede wrote:
> Hi Maxime and Chen-Yu,
>
> Here is a series with various improvements for the Orangepi Plus dts.
> Some (most) of these patches have been submitted before, esp. the USB
> ones have multiple revisions before. But I lost count of their ve
The Orangepi Plus and Orangepi Plus 2 have a realtek rtl8189etv sdio
wifi chip. This commit adds a device-tree node to power it up, so
that the mmc subsys can scan it, and enables the mmc controller which
is connected to it.
Note that this just makes the wifi controller show up as a sdio device.
I
From: Jens Kuske
Enable the 2 USB host controllers used on the Orange Pi Plus
and add the necessary regulators.
Signed-off-by: Reinder de Haan
Signed-off-by: Hans de Goede
Signed-off-by: Jens Kuske
---
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 44
1 file cha
From: Krzysztof Adamski
OrangePi Plus board has two leds - green ("pwr") and red ("status")
and two switches ("sw4" and "sw2"). This patch describes them in
devicetree.
Signed-off-by: Krzysztof Adamski
Signed-off-by: Hans de Goede
---
Changes in v6 (hdegoede):
-Merge leds and r_leds nodes into
Enable the ir receiver found on the orangepi plus board.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 1cb6
The Orangepi Plus has a 16GB eMMC, the vcc, the lack of pull-ups and
the use of the hw-reset pin have all been verified with the board
schematic.
With this dts node for mmc2, the eMMC runs at the following ios settings:
clock: 5200 Hz
vdd:21 (3.3 ~ 3.4 V)
bus mode: 2
From: Reinder de Haan
Add nodes describing the H3's usbphy and usb host controller nodes.
Signed-off-by: Reinder de Haan
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun8i-h3.dtsi | 101
1 file changed, 101 insertions(+)
diff --git a/arch/arm/bo
Hi Maxime and Chen-Yu,
Here is a series with various improvements for the Orangepi Plus dts.
Some (most) of these patches have been submitted before, esp. the USB
ones have multiple revisions before. But I lost count of their version,
so I'm posting this as a "new" set.
About the USB patches, the
From: Reinder de Haan
Add a node describing the usb-clks found on the H3.
Signed-off-by: Reinder de Haan
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun8i-h3.dtsi | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i
Add a pinctrl node for mmc2 in 8 bits mode on H3 SoCs.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun8i-h3.dtsi | 10 ++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index dadb7f6..d1be2f5 100644
--- a/arch/arm/b
Hi Siarhei!
Am 20.03.2016 um 15:49 schrieb Siarhei Siamashka:
This patch is just unsafe if pushed alone, that's why it implicitly
depends on the other "fel: Move the temporary scratch buffer under the
IRQ stack" patch.
I see. My impression was that while "unclean" on its own, it's still
funct
On Wed, Mar 16, 2016 at 5:04 PM, Vishnu Patekar
wrote:
> The A83T has R_PIO pin controller, it's same as A23, execpt A83T
> interrupt bit is 6th and A83T has one extra pin PL12.
>
> Signed-off-by: Vishnu Patekar
> Acked-by: Chen-Yu Tsai
> Acked-by: Rob Herring
I think I already merged this?
Am 16.03.2016 um 13:09 schrieb Robin Murphy:
> On 16/03/16 11:39, Marc Zyngier wrote:
>> On 16/03/16 11:19, Bert Lindner wrote:
>>> Hopefully this is the correct place and way to report this.
The main discussion is on netdev list actually, CC'ed.
>>> For the board sun7i-a20-olinuxino-lime2, there
On Sun, 20 Mar 2016 15:18:10 +0100
Bernhard Nortmann wrote:
> One thing that came to my mind while playing around with this: Should we
> add something like this to the commit message?
>
> "Caveat: Use these commands with caution! Errors during execution of
> the scratch buffer code, e.g. attemp
One thing that came to my mind while playing around with this: Should we
add something like this to the commit message?
"Caveat: Use these commands with caution! Errors during execution of
the scratch buffer code, e.g. attempts to access an invalid memory
location, might crash the FEL; requiring
Thanks! Committed to sunxi-tools/master.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https:/
On Sun, 20 Mar 2016 14:03:24 +0100
Bernhard Nortmann wrote:
> Am 20.03.2016 um 13:53 schrieb Siarhei Siamashka:
> > Thanks, also adding an extra
> >
> >|| busnum < 0 || devnum < 0
> >
> > check here would make it perfect.
> >
> > If the user tries to provide negative numbers in th
On Sat, 19 Mar 2016 18:29:40 +0100
Bernhard Nortmann wrote:
> Am 17.03.2016 um 13:55 schrieb Bernhard Nortmann:
> >
> > I can confirm/reproduce this behaviour on my A20 when accessing the
> > SID register. Interesting enough, the bytes that actually do get read
> > (i.e. end up != 0) are "corre
> "Code" == Code Kipper writes:
Hi,
>> You can easily build a kernel with an initramfs including alsa with
>> Buildroot. Have a look at configs/cubieboard2_defconfig as a starting
>> point or ssvb's orangepipc limatester setup:
>>
>> https://github.com/ssvb/buildroot/commit/86f9ef02f636
The A83T has R_PIO pin controller, it's same as A23, execpt A83T
interrupt bit is 6th and A83T has one extra pin PL12.
Signed-off-by: Vishnu Patekar
Acked-by: Chen-Yu Tsai
Acked-by: Rob Herring
---
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
drivers/pinctrl/sunxi/Kconfig
hI,
On 19-03-16 23:43, Dennis Gilmore wrote:
Hans,
What is the status of this patch?
I added this to my sunxi-wip tree (including a fix for the build error)
a couple of days ago. I will send a pull-req for various u-boot sunxi
patch soonish and then it will hit mainline.
Regards,
Hans
D
Thanks! Commited and closed PR accordingly.
Regards, B,. Nortmann
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For m
On Thu, 17 Mar 2016 19:38:54 +0100
Bernhard Nortmann wrote:
> From: Lourens Rozema
>
> Tested-by: Bernhard Nortmann
> ---
> This picks up a long-standing pull request from the github repo that seemingly
> noone cared to take forward to the mailing list. The one-line change looks
> sane,
> an
On Thu, 17 Mar 2016 18:31:42 +0100
Bernhard Nortmann wrote:
> Am Montag, 25. Januar 2016 05:51:02 UTC+1 schrieb Siarhei Siamashka:
> > Doing certain operations may need uploading and executing code
> > on the device. For example, such operations right now are
> > reading/writing ARM CP15 coproces
Am 20.03.2016 um 13:53 schrieb Siarhei Siamashka:
Thanks, also adding an extra
|| busnum < 0 || devnum < 0
check here would make it perfect.
If the user tries to provide negative numbers in the command line, then
it is reasonable to fail with an error instead of silently reverti
On Thu, 17 Mar 2016 13:55:25 +0100
Bernhard Nortmann wrote:
> Am Montag, 25. Januar 2016 05:51:02 UTC+1 schrieb Siarhei Siamashka:
> > The read/write operations done by FEL are not suitable for accessing
> > hardware registers. For example, trying to read a SID value using
> > the "read" or "hexd
On Thu, 17 Mar 2016 11:18:03 +0100
Bernhard Nortmann wrote:
> See https://github.com/linux-sunxi/sunxi-tools/issues/37
>
> The patch was originally inspired by
> https://github.com/NextThingCo/sunxi-tools/commit/16386a7
> and
> https://github.com/NextThingCo/sunxi-tools/commit/47bafaf
>
> It in
On 16/03/16 11:39, Marc Zyngier wrote:
On 16/03/16 11:19, Bert Lindner wrote:
Hi,
Hopefully this is the correct place and way to report this.
For the board sun7i-a20-olinuxino-lime2, there seems to be a problem
with the eth0 PHY in mainline kernel 4.5.0 that developed since
4.5.0-rc7. Ethernet
On 20 March 2016 at 10:16, Peter Korsgaard wrote:
>> "Code" == Code Kipper writes:
>
> > Hi all,
> > I've been playing with the audio on sun4i for some time now and have
> > placed a branch on my github with all my changes
> > https://github.com/codekipper/linux-sunxi/commits/kevin.
> >
On 20 March 2016 at 10:53, Danny Milosavljevic wrote:
> Hi CK,
>
>>I've been playing with the audio on sun4i for some time now and have placed a
>>branch on my github with all my changes
>> https://github.com/codekipper/linux-sunxi/commits/kevin.
>
> Good to hear!
>
> On which branch? I checked
Hi CK,
>I've been playing with the audio on sun4i for some time now and have placed a
>branch on my github with all my changes
> https://github.com/codekipper/linux-sunxi/commits/kevin.
Good to hear!
On which branch? I checked
https://github.com/codekipper/linux-sunxi/tree/linux-next/sound/soc
> "Code" == Code Kipper writes:
> Hi all,
> I've been playing with the audio on sun4i for some time now and have
> placed a branch on my github with all my changes
> https://github.com/codekipper/linux-sunxi/commits/kevin.
> Most of this is WIP but I'm pretty confident that I've covered
Hi all,
I've been playing with the audio on sun4i for some time now and have
placed a branch on my github with all my changes
https://github.com/codekipper/linux-sunxi/commits/kevin.
Most of this is WIP but I'm pretty confident that I've covered
everything with the sun4i-codec. It's just that I've
36 matches
Mail list logo