Re: [pfSense] Slow speed on 100Base TX full duplex.

Thanks Alot guys, this is something can do with thorough testings but my client does not want to work on this colo anymore and i have no more access of these servers :(. Thanks, Yousuf On Wed, Jan 13, 2016 at 9:44 AM, Ugo Bellavance wrote: > On 16-01-11 01:23 AM, Muhammad Yousuf

Re: [pfSense] Slow speed on 100Base TX full duplex.

On 16-01-11 01:23 AM, Muhammad Yousuf Khan wrote: I am remotely supporting one of my client who is using pfsense. i have been using pfsense for years and never face such issue in this experience, the Client Co-location is recommending to use 100BaseTX full duplex setting instead of Auto. i do

Re: [pfSense] Slow speed on 100Base TX full duplex.

em0@pci0:4:0:0: class=0x02 card=0x15d9 chip=0x10968086 rev=0x01 hdr=0x00 class = network subclass = ethernet em1@pci0:4:0:1: class=0x02 card=0x15d9 chip=0x10968086 rev=0x01 hdr=0x00 class = network subclass = ethernet We had a switch in b/w Pfsense

Re: [pfSense] Slow speed on 100Base TX full duplex.

Op 11-1-2016 om 14:46 schreef Muhammad Yousuf Khan: > em0@pci0:4:0:0: class=0x02 card=0x15d9 chip=0x10968086 rev=0x01 > hdr=0x00 > class = network > subclass = ethernet > em1@pci0:4:0:1: class=0x02 card=0x15d9 chip=0x10968086 rev=0x01 > hdr=0x00 > class =

Re: [pfSense] Slow speed on 100Base TX full duplex.

First I would switch the interfaces to see if em1 delivers the same low performance as em0 when used as WAN. If that doesn't work, try installing new interfaces. You mentioned earlier that the colo told you to lock the WAN interface at 100Mb/full-duplex. Our ISP was doing the same thing for a

Re: [pfSense] Slow speed on 100Base TX full duplex.

Here you go, yes there are error in the interfaces i can not get more detail as i can not run the command pkg_add it is saying that command not found however i know its a server board and it has two bultin LAN. 1 i am using for WAN and For LAN. here is CPU details. Intel(R) Xeon(R) CPU E5440 @

Re: [pfSense] Slow speed on 100Base TX full duplex.

use Intel ethernets. even the cheap ones work as expected. also ask them to set ports to 10 half 10 full 100 half, reset counters on each change, you change to the same and see if in any works without errors. or ask them to set it to auto. also change cables to something real. its swimming with

Re: [pfSense] Slow speed on 100Base TX full duplex.

Muhammad Yousuf Khan wrote on Mon, Jan 11 2016 at 12:23 am: > - iperf speed test for LAN, between is 50Mbps up and down > - but iperf test on WAN showing 10Mbps down and 5Mbps up. > - however my client is saying that assigned speed from colo is 100Mbps. "full duplex" means the card