Hi Garst!
On 18-Aug-99 Garst R. Reese wrote:
I am at a loss of how to best solve this problem.
At present, it is virtually impossible to use an unpatched LyX to
produce a book in the (North American) common 5.5in x 8.5in format. I
say virtually, because in order to preview the book I must
On 19-Aug-99 Allan Rae wrote:
On Thu, 19 Aug 1999, Allan Rae wrote:
There is a major problem with lyx handling of custom paper sizes when
exporting to postscript. In fact, LyX exports to the default paper size!
If I run from the command line "dvips -o out.ps -T5.5in,8.5in out.dvi"
then
On 19-Aug-99 Allan Rae wrote:
I don't think we need this entry. The default is a explained above the
LaTeX default!
NO!!!
I still think YES :)
If you have:
\documentclass[]{article}
\usepackage{geometry}
\geometry{verbose}
And geometry still inherits the default
On 19-Aug-99 Allan Rae wrote:
I've attached my patch to fix the custom page size printing problems.
I've tested this myself and pretty confident it'll work properly. It's
against the latest cvs but should apply okay to 1.0.4pre4. So Garst can
you try this and see how it goes.
I like
On 19-Aug-99 Allan Rae wrote:
Uh oh.
I actually did my testing using IEEEtran.cls not the article.cls as
mention above. It would seem that IEEEtran.cls is broken because as
Juergen's just arrived email says article works. I've just tested book
and report and am moving on to a few
On 19-Aug-99 Allan Rae wrote:
This can only occur if the user has somehow managed to set
lyxrc-default_papersize to PAPER_DEFAULT and this is impossible if you
check lyxrc.C. I just wanted to avoid a compiler warning for not checking
PAPER_DEFAULT -- strangely I don't get the warning for
On 19-Aug-99 Duncan Simpson wrote:
Actually there is another problem that the patches so far do not fix: view ps
will crop it to whatever it thinks the paper size actually is anyway and this
is a gs feature :-) This got me and my print queue---gs thought US letter and
depidated my A4
On 23-Aug-99 Lars Gullik Bjønnes wrote:
Every night at 04:20. that is when rsync updats my backup of the cvs.
(it is caused by a disk that I don't trust anymore)
(I need to more the lyx repository to another disk (one that I have
got from Jurgen), but then I need a new motherboard (I have
Hi,
I just made an update of the lyx-devel sourcetree, to have a look as
I may have time now to work a bit on lyx, but I've seen that there is
src/config.h.in missing and I cannot compile.
Could you give me a hint please!
Greets Jürgen
Hi!
I'm amazed I just compiled the actual development-version and I couldn't
believe that we actually have some Display!!! I did always follow all
mails and I cannot remember that someone said that the display is
working with the new kernel.
But ok what should we do? Priorities? I'll work on
Would it be too much to hope that Corel and Sun/Staroffice would be willing to
contribute? They have "the knowledge"... in that case, LGPL rather than GPL.
Yes, I could try and contact them. Before that maybe I can start the
project in CoSource.com, maybe they can handle that.
As much
- no accents
- no transliteration of special characters like ~\%
- no math formulae, no references...
This is true only until we get our bufferview widget into gui-independent
form then we can create a small buffer in any dialog (remember this was
proposed for the find/replace dialog)
On 22-Sep-99 Lars Gullik Bjønnes wrote:
I _really_ want 1.0.4 out the door first. But I have begun on the new
1.1.x. So far I have introduced automake and moved mathed and insets
into subdirs. I am reluctant to do much more before commiting to cvs.
Good :)
I am also not quite sure how
On 22-Sep-99 Pablo De Napoli wrote:
Hello!
Hi Pablo!
My name is Pablo De Napoli , and I work at the mathemathics department of
Buenos Aires University (Argentina).
A really nice city (I loved it :)!!! Have been there in March and will
probably return there in November. I have been in
Hi!
I just got xforms 0.89 as I've seen that it was now officially
released! I've seen some of the new stuff and I think we should
really add support for that in the lyx-devel version and drop our
workarounds for missing features! So I opt for the proposal of
Lars (now that 0.89 is official)
On 28-Sep-99 Jean-Marc Lasgouttes wrote:
Two things:
1/ 0.89 is ot out for all architectures and is probably a bit unstable
now.
You're right, but by the time we are finished with lyx-devel and release
v1.2 it will :)
2/ We have various things to do before switching to 0.89. As far as
On 29-Sep-99 Lars Gullik Bjønnes wrote:
If there are no last minute objections I will release 1.0.4 later
today, in the early afternoon.
I_have updated the documentation and the text file. Gotten en new spec
file. So I_think everything should be ready now.
The 1.0.4 to be is in cvs
On 01-Oct-99 Alejandro Aguilar Sierra wrote:
On Fri, 1 Oct 1999, Andre' Poenitz wrote:
I wonder whether there is a non-zero probability that LyX's "native"
format will be dropped entirely at some point in the future.
IMO the probability is high, but don't hold your breath.
If you
Hi!
I just discovered that there is a BUG in the Table-Layout when using
libxforms.89. The problem is that on a fl_close_... the callback-functions
are called again and so the actuall column alignment is always set to
"left" :(. This happens ONLY when using xforms-0.89 !!!
Should I send a
On 01-Oct-99 Sergio Luiz Carmelo Barroso - pos wrote:
Thank you again. I guess I will have a lot of work to get LyX
running 8-). I supose all the necessary files are listed in some readme
at the LyX sources distribution, rigth?
Thank you,
If you want you may download a
Hi!
I forgot the Emacs-command to update the Changelog could someone
please refresh my memory.
Thanks,
Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vigna E-Mail: [EMAIL PROTECTED]
Gerbergasse 60Tel:
On 08-Oct-99 David S de Lis wrote:
Hi all,
Hi David!
[sniped good explanation]
I think I'd like to hear other developers points of views regarding this
issue. As I said before, it's not big thing, but I thought it deserved a
defense... :)
I think Jean-Marc is right ;), if we introduce
On 10-Oct-99 Garst R. Reese wrote:
go to:
http://bragg.phys.uwm.edu/xforms/
and get the bxforms .89 for glibc2.1
I wouldn't advice to do this! I have discovered problems with
lyx-1.0.4 with bxforms-.89. Use .88 version then you won't have
any unexpected problems!!!
Greets Jürgen
the form, but I'll let you decide.
Jürgen
-FW: [EMAIL PROTECTED]-
Date: Mon, 11 Oct 1999 10:19:27 -0700 (PDT)
From: "T.C. Zhao" [EMAIL PROTECTED]
To: Juergen Vigna [EMAIL PROTECTED]
Subject: Re: Smal bug or feature?
Hi Juergen,
I believe this new behavior is the correct o
On 12-Oct-99 [EMAIL PROTECTED] wrote:
Is there anything in Xforms 0.89 that will help us solve the
"too wide" tables problem?
No there isn't and I wouldn't use 0.89 with lyx-1.0.4 and tabulars!!!
I already implemented tabulars as insets in the old lyx-devel and
will do this as soon as we
On 12-Oct-99 Kayvan A. Sylvan wrote:
Hi everyone,
Hi Kayvan!
My only problem was this: The table as displayed by LyX is too wide to operate
on comfortably. I end up stretching the LyX window (wider than my screen
size) and using ALT-secound-mouse-button to move the LyX window around
so
On 16-Oct-99 Russ Ross wrote:
build today to confirm that the bug happened in the
latest version. I have xforms V0.89.
So I think this should be the last time I reply to this type of message.
Would someone please put this on the web-page so that people are warned?
On 19-Oct-99 Nils Jeppe wrote:
You're right, it is 0.89 - I am a little surprised, because I was very
certain that when I first compiled LyX, I grabbed whatever XForms library
it said to get in the LyX Installation docs. Did this change some time,
like was the recommendation "downgraded",
Hi,
shouln't return the above function and also find_first_of(...) an index
startin from 0 as all string functions do normally? I need a fast answer
as someone (I guess I know how ;) missinterpreted some function calls
in vspace.C and so they don't work anymore. Now I would like to know
if I
On 19-Oct-99 Asger K. Alstrup Nielsen wrote:
shouln't return the above function and also find_first_of(...) an index
startin from 0 as all string functions do normally? I need a fast answer
as someone (I guess I know how ;) missinterpreted some function calls
in vspace.C and so they don't
On 19-Oct-99 Jan Ulrich Hasecke wrote:
CMD: faxspool '4'
'/tmp/lyx_tmp22397aaa/lyx_bufrtmp22397aaa/Flyer-1.ps_tmp'
/tmp/lyx_tmp22397aaa/lyx_bufrtmp22397aaa/FAX22397aaa
2/tmp/lyx_tmp22397aaa/lyx_bufrtmp22397aaa/FAX22397aaa
There is a file in this directory, but it is called:
On 19-Oct-99 Jean-Marc Lasgouttes wrote:
"Juergen" == Juergen Vigna [EMAIL PROTECTED] writes:
Juergen Thank's this is exactly what I looked for :). This IS a bug
Juergen and it should be solved! Did someone already apply the patch
Juergen for this '-'-'_' problem? Otherwise
Juergen I think this should be removed and there should be a check in
Juergen the constructor which just does not initialize if the pointer
Juergen is a 0 pointer!
You mean initialize to empty?
No I mean remove the Assert() and change
if (*s)
to
if (s *s)
I already did this so, ...
Lars Jean-Marc Lasgouttes [EMAIL PROTECTED] writes: |
Lars Juergen if (s *s) | | Juergen I already did this so, ... ;)
Lars | | OK, it looks reasonable.
It's ok to revert changes which are not optimal, but IMVO that if you
revert changes which fix a bug then you should at least fix the
On 20-Oct-99 Lars Gullik Bjønnes wrote:
If it was obvious I would. I got the impression that the bug was in
vspace.C, but a quick scan did not reveal it to me.
But you should have fixed the bug correctly...
If I would have know what means correctly for you, then yes, but I'm
no
On 20-Oct-99 Lars Gullik Bjønnes wrote:
| If I would have know what means correctly for you, then yes, but I'm
| no mindreader yet...
A standard is a standard is a standard.
(You dont change them you see...)
Why, so only people knowing all C++ standards should touch the lyx-code?
So I've
On 20-Oct-99 Lars Gullik Bjønnes wrote:
Juergen Vigna [EMAIL PROTECTED] writes:
| Just to be curious, someone does compile lyx-devel with STL so that
| lyxstring is not used? Could that person try to insert a lable in the
| code from the menu Insert-Label and see what happens?
You mean
On 20-Oct-99 Lars Gullik Bjønnes wrote:
Juergen Vigna [EMAIL PROTECTED] writes:
| So the fix was not that wrong :), why not have the Assert only in
| development versions?
Yes it was that wrong! "shall not" under a requirements heading is
pretty adamant.
* smile *
It st
Hi!
I had a look at figinset.C, which segfaults with xforms 0.89. Here we
don't have the same problem as in the tabular stuff (hide and callbacks),
but the fl_free_form() call is segfaulting. I removed that calls and
now it does not segfault anymore, but we obviously have a memory leak
(not very
On 21-Oct-99 Jean-Marc Lasgouttes wrote:
This one is from me (for my defence, I am still not able to compile
cleanly, so I did not test thoroughly). As you might see the C_
function gets a ob argument but does not use it. This is _bad_.
Good luck #:O)
Patch in cvs now.
Ok I'll have a
On 21-Oct-99 Amir Karger wrote:
OK, it's minor, but check out section 2.4.1 in
http://linux.corel.com/articles/students_print.htm
Pretty neat to be on Corel's web site, no? And LyX is mentioned before
WordPerfect, and the article was written in Lyx then pasted to WP.
Nice article, we're
On 24-Oct-99 [EMAIL PROTECTED] wrote:
ERT only
\footnote{...}
Well yes, but \footnote{} wouldn't work in a normal table :)
On Sun, Oct 24, 1999 at 02:48:38PM +0200, Nils Jeppe wrote:
...is this somehow possible? Is it being worked on in the 1.1 devel tree?
I couldn't find anything
I'll forward this replay so you'll see that we get a 0.89.1 verion
which should again work with NEWER version of lyx (NOT 1.0.4!!!)
-FW: [EMAIL PROTECTED]-
Date: Sat, 23 Oct 1999 09:42:46 -0700 (PDT)
From: "T.C. Zhao" [EMAIL PROTECTED]
To: Juergen Vigna [EMAIL PROTECTED]
S
On 24-Oct-99 Xiantao Li wrote:
Hello,
I am using Lyx, and I realize that it's a wonderful software. What
puzzled me now is about putting a fugure into the file. When I put the
figure into the float, I can see it on the screen, but when I want to see
the ps file, it gave 2 errors, like
Hi!
I added some files and then when remaking all I get this:
make[1]: *** No rule to make target `POTFILES.in', needed by `POTFILES'. Stop.
make[1]: Leaving directory `/nfs/sinco/source/lyx/lyx-devel/po'
make: *** [all-recursive] Error 1
I know we can create this POTFILES.in using:
grep -E
After my last update today I get this warnings when compiling:
support/lstrings.h:49: warning: ANSI C++ forbids braced-groups within expressions
support/lstrings.h:49: warning: ANSI C++ forbids braced-groups within expressions
support/lstrings.h:50: warning: ANSI C++ forbids braced-groups within
On 25-Oct-99 Jean-Marc Lasgouttes wrote:
I know autogen.sh does it, but is it enough?
Ohh I didn't see that :). I just did an cvs update and the make :)
probably I should have done a make maintainer-clean;./autgen.sh;configure;make,
but how does one know when to do that and when not.
IMO
So, if you have a link to a review or other article about
LyX, please provide a link, and we can collect it into a
Press page.
What about:
http://www.sad.it/~jug/lyx/article.html
Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vigna
On 27-Oct-99 Steffen Moeller wrote:
\TR\ allows
created as TEX\SP\/TEXMATH+/MATHTEX\TR\/TEX.
The \ behin \SP can be removed which solves the problem.
If you use LaTeX code directly in LyX YOU have to know what to do.
So if you introduce an
On 27-Oct-99 Steffen Moeller wrote:
SUBSECTIONsome headerMARGIN NOTEa comment/MARGIN NOTE/SUBSECTION
it appears as a box labeled "margin", sorry. Normally those boxes can be
deleted with backspace - those margin boxes can't.
Ahh, when I hear margins I think of border-margins
On 02-Nov-99 Lars Gullik Bjønnes wrote:
First of all I wonder what we want to achieve with this functions. I
understand that we want to avoid characters that can give us problems
with filenames on different systems.
IMO all 8-bit (öü...) chars in filenames give problems with latex!
Also
On 03-Nov-99 Jean-Marc Lasgouttes wrote:
Did you read my message from yesterday? SpaceLess should only be
needed for latex, and thus only keep characters with catcode 11 or 12.
We do not care about /, since it is _not_ supposed to be here in a
valid .lyx file name. If we want to check all
On 03-Nov-99 Lars Gullik Bjønnes wrote:
Jean-Marc Lasgouttes [EMAIL PROTECTED] writes:
| "Lars" == Lars Gullik Bjønnes [EMAIL PROTECTED] writes:
|
| Lars I agree that the algorithm Jean-Marc proposes is sufficient. I
| Lars think tht the whole SpaceLess function should go. We could have
|
On 03-Nov-99 Lars Gullik Bjønnes wrote:
Regarding the Custom-Export-Html, I don't think this is important
enough to wait for. Any way I hope to have a 1.1.3 ready by the end of
the month, and we will have it by then.
Agreed!
Jürgen
On 03-Nov-99 Peter Lundqvist wrote:
Your'e right about that.
And I did check that it was in the searchpath, and I did run ldconfig.
Hence it should compile, but it didn't.
I got unresolved references to fl_calloc etc..
What version of xforms do you have installed?
Attention that 0.89
On 03-Nov-99 Lars Gullik Bjønnes wrote:
Also note that the XForms libarary version 0.89 is NOT stable and you
might experience problems (i.e. crashes) if you use it with LyX.
GOOD!!! #:O)
Greets Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vigna
_I_ am supposed to look at it when users send bug reports with
horrible latex logs.
#:O)
Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vigna E-Mail: [EMAIL PROTECTED]
Italienstr. 13/N Tel:
On 10-Nov-99 Lars Gullik Bjønnes wrote:
|
| I thing we should do exactly that, but not use _, since it is a bit
| difficult do count the _ in names like a___b.tex (at least with the
| font I use). What about an 'X'?
Remember that _you_ are not supposed to look at that file at all. It
should
-FW: [EMAIL PROTECTED]-
Date: Fri, 12 Nov 1999 10:34:14 +0100
Sender: [EMAIL PROTECTED]
From: Christian =?iso-8859-1?Q?Ridderstr=F6m?= [EMAIL PROTECTED]
To: Juergen Vigna [EMAIL PROTECTED]
Subject: Re: Conversion between table-float and wide table-float
Thanks
Then I'll post my
Hi all!
I'm now unsubscribing from lyx mailing lists as I'm ready again for
some holidays :). Please forward mails which you think I should read
to my personal mail-address.
I'm off 4 weeks and will return mid December. Wish you good work #:O)
Greets Jürgen
On 19-Dec-1999 Asger K. Alstrup Nielsen wrote:
since I live in the south or Norway I drink beer the same was as Asger
does.
In Denmark, the latest is that they pack the beer in plastic bottles
instead of the glass bottles.
Do you have that in Norway as well? It tastes the same, but when
On 21-Dec-1999 Lars Gullik Bjønnes wrote:
Unless I hear _very_ strong objections I will remove all support for
XForms versions older thatn 0.88 after 1.1.4 is released.
No objections at all :)
Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vigna
On 21-Dec-1999 Jean-Marc Lasgouttes wrote:
- LyX should not crash when reading tables with an older format
I'll have a look at this as it is something I noted lately :)
Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vigna
On 22-Dec-1999 Allan Rae wrote:
Juergen, what version of STLport did you try with 2.7.2?
Oh I cannot remember but the ChangeLog file tells me:
The following changes were made since 3.2 release:
So I gues 3.2.x :)
BTW, welcome back and thanks for fixing the table crash so quickly.
Oh well yes I remember now, it's the mail Jean-Marc forwarded me when
I still was in Argentina to have some work to do when I return #:O)
I know of this problem, but I don't think I will correct it in the
actual code I really want to backport from the old devel-version the
tabular-insets and
On 23-Dec-1999 A Rosina Bignall wrote:
I remember seeing this when I first created a table with a multicolumn on one
row. I had a hard time turning that left-edge off. I played with turning the
edges on and off a bunch of times until the dvi/ps output came out right. I
still can't get
Hello!
IMO, it's not enough just to expand mirror sites list, but maintainence is also
important. You see, right now there're 3 mirror sites. That one in Mexico is
inaccessible, and the other two in Norway and Italy are totally out of dates (more
than half a year late). I've
Rehi Jose!
On 06-Jan-2000 Jose Abilio Oliveira Matos wrote:
There are other issues, the insets aren't supposed to be configured
from the textclasses. Also you need to translate some of the chars, like
# % (maybe) ...
The docbook approach is a good first step for a general xml ( =
On 06-Jan-2000 Andre Poenitz wrote:
Maybe there is a Better Thing. The current LyX format is far from being
perfect. It works, yes, but it is not as simple as it could be and this
is a major pain when it comes to interoperation with the rest of the
world.
Switch to some XMLish .newlyx
There are 4 possible mime-types:
application/lyx
application/x-lyx
text/lyx
text/x-lyx
IMO, text/x-lyx seems more appropriate. What do you think? We
I would opt for application/x-lyx (that's what I currently use ;)!
Greets Jürgen
On 7 Jan 2000, Lars Gullik Bjønnes wrote:
I have put code that I think should make it possible to use lyx with
modern istream, but I have also experienced dataloss when trying this
outl Note that I have used a C++ lib in alpha state when doing this,
so it might be perfect as it is, but be
On 07-Jan-2000 Lars Gullik Bjønnes wrote:
Juergen Vigna [EMAIL PROTECTED] writes:
It seems that you have a header problem, have you done experiments
with stlport?
No not at all!
stringstream should only be used if you have the sstream hader,
otherwise the strstream should be used
BUT! application/postscript, application/pdf.
These are text file formats too, but typically created by applications
and not really intended to be manually edited -- although you can if you
want to.
html or TeX on the other hand are MEANT to be manually edited, and designed
for that
Hey, I've just found the most simple and most radical solution: Compile
with
cxx -ansi -pedantic -terroristic -D__ULTRA_STRICT_ANSI__
-D_KALASHNIKOW
and let the compiler shoot everybody who introduces a non-standard
function.
I guess then we won't have a lot developers after the
On 14-Jan-2000 Allan Rae wrote:
It is probably a mistake to look at LyX internals when defining a new
file format. If for no other reason than that we still fully intend
to merge Asger's kernel and all the new Insets from the old devel
branch. In fact it might be wiser to either just
ok please find the sample.lyx file. when i try to copy on table from
one to the other new file i've got :
lyx: SIGSEGV signal caught
Sorry, you have found a bug in LyX. If possible, please read 'Known bugs'
under the Help menu and then send us a full bug report. Thanks!
lyx:
On 15-Jan-2000 Asger K. Alstrup Nielsen wrote:
[sniped the fun stuff]
As mostly I agree with you #:@)
As it happens, the core LyX team agrees that it's a good idea to do GUI
independence for engineering reasons, but that's only because we meet
once a year and drink some beer.
Well I
On 21-Jan-2000 Jean-Marc Lasgouttes wrote:
- ascii export does not export tables (maybe juergen should have a
look)
Yes I'll have a look but I don't think I can do this till monday!
Greets Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._
Dr. Jürgen Vigna
Well I had a look and there are 2 problems:
1. The ascii-export in table.C for (g/t)roff file is broken!
2. The 1. shouldn't be a problem as when I implemented export for tabulars
I also implemented an export as raw ascii (without any prefilter), but
this cannot be called because
On 21-Jan-2000 Juergen Vigna wrote:
2. The 1. shouldn't be a problem as when I implemented export for tabulars
I also implemented an export as raw ascii (without any prefilter), but
this cannot be called because 'ascii_roff_command' is not set correctly.
Forget this please
On 23-Jan-2000 Dekel Tsur wrote:
Before my patch is applied, I'm thinking of changing the file format for
Hebrew documents.
Currently, I use "\direction rtl" to switch to Hebrew and "\direction default"
to return to English (regardless of the language of the document).
However, it may be
On 25-Jan-2000 Jean-Marc Lasgouttes wrote:
Abdel By the way, I checked already the html export feature... very
Abdel nice!!! Especially for maths!! I opened my 200p thesis full of
Abdel maths and graphics without any problem... One side-note though,
Abdel under KDE when the option 'Display
Hello unknown!
OffTopic
As someone who is in academics for most of his life I would strongly discourage
you from interrupting your theis. I dont know you personally but I do not think
you should interrupt because I have reason to suspect that you never will
restart. You get the chance to
On 28-Jan-2000 imel... wrote:
hi all,
dunno if you kill this one.
on 1.0.2, in file-open dialog, if i fill nothing in the
edit box and pressed the ok button then lyx closes itself.
i haven't try 1.1.3, and am not on the list
This does not happen with
On 01-Feb-2000 John D. Blair wrote:
Hello,
Hello Blair!
Thanks much for all of your excellent work on LyX. I'm really happy
with what it can do now, and I'm looking forward to everything you're
still working on.
#:O)
At any rate, I've attached a patch to implement a simple new
On 01-Feb-2000 Andre Poenitz wrote:
Your editor is broken. It obviously failed to show you lines 26 and
27 when you worked on LyXAction.C :-)
Now I see it, my editor really had the function hide-file-comment-for-
how-to-know-to-do-things enabled so I didn't see that lines #:O)
PS:
Well as much as I can see we have aspell support in LyX.
Ok I have not taken a good look at the source but right now it seams
that you still use ispell/aspell through a pipe interface.
Yes that's true!
The diffrence here is that you are only thinking of LyX I am thinking of
the
On 02-Feb-2000 Kevin Atkinson wrote:
That doesn't matter. Whatever you implement you can use that for other
projects too. I don't think we are interested in working on other project
too, as we already have little time for LyX right now (at least me ;)
So you are saying you are not willing
On 02-Feb-2000 Kevin Atkinson wrote:
Yes most certanly but I want it to be generic enough that ANY project
can use it. I want to use C as it the most portable and will allow pure C
projects to use it. Using C++ would defeat the purpose of my goals.
I guess if you have a nice API in your
On 02-Feb-2000 Asger K. Alstrup Nielsen wrote:
Of course, none of us actually know the LyX core well enough to get anything
done, but we could certainly get together and drink cheap American beer!
Hey! Hey!
Even if beer is expensive in Norway, we *will* get together and drink it!
And I
On 03-Feb-2000 Lars Gullik Bjønnes wrote:
Juergen Vigna [EMAIL PROTECTED] writes:
| IDEA for setting locale on the document language:
| -
|
| We store the different babel-languages in tex-strings.C::tex_babel[].
| Would it be possible
On 03-Feb-2000 Lars Gullik Bjønnes wrote:
Juergen Vigna [EMAIL PROTECTED] writes:
| This is a C way of doing it since C can't handle several locales at
| the same time. C++ and it wonderful Standard Library on the other hand
| does support this. And IMHO we should use the C++ locale
On 03-Feb-2000 Michael Meskes wrote:
On Thu, Feb 03, 2000 at 03:58:02PM +0100, Lars Gullik Bjønnes wrote:
| + for (int i = 0; i datetmp_len; i++) {
In C++ it is adviced to use preincrement instead of postincrement:
Could anyone please enlighten me and tell me why preincrement is
On 04-Feb-2000 Allan Rae wrote:
On Fri, 4 Feb 2000, Kevin Atkinson wrote:
On 3 Feb 2000, Lars Gullik Bjønnes wrote:
[...]
| modern C++ which means it is not the most portable thing in the
| world.
Perfect for LyX then.
But you want to maintain compatibility with gcc 2.7.2? My
On 04-Feb-2000 Reuben Thomas wrote:
Nice to see the new date insertion command, but the comment in
lyxrc.example is a bit weird; how about:
# Default format string for the date-insert command
#
# This accepts the normal strftime formats; see man strftime for full
# details of the format.
#
Hi!
This is probably for Amir to look at and please submit to the www-user-web :)
Just a small patch which introduces a $translator variable and writes the
Translator email near the authors email in end.php3. I find this usefull
as then the problems arising in translated sites as now the
On 08-Feb-2000 Nils Jeppe wrote:
On Tue, 8 Feb 2000, Juergen Vigna wrote:
Well I would have asked (I do it now ;) what version of LyX he uses!
Ascii export of tabulars works in 1.1.4 again!
I use whatever is in Debian, I don't have the time anymore to compile from
cvs or tarballs
Hi Michael!
here are a few comments on Lyx-1.1.4.
The new space editing feature (two blanks between words while editing)
does not work in tables.
Well I could have a look at this but I think Lars would be faster as
he made that code :)
The keys "Home" and "End" do not let you jump
On 08-Feb-2000 Jean-Marc Lasgouttes wrote:
"Reuben" == Reuben Thomas [EMAIL PROTECTED] writes:
Reuben Subject says it: I get an error from lyx 1.1.4: LyX: Unknown
Reuben tag `\date_insert_format' [around line 564 of file
Reuben ~/.lyx/lyxrc]
The entry for this variable is indeed
On 07-Feb-2000 Lars Gullik Bjønnes wrote:
Nils Jeppe [EMAIL PROTECTED] writes:
| hello,
|
| Did you change the export to ascii function around? It doesn't seem to
| create ascii versions of tables anymore... If nobody changed it, I assume
| it's a debian problem... ;-(
It was changed. It
1 - 100 of 4844 matches
Mail list logo
