Could somebody please give me a hint what I have to do after this warning:
LyX Warning! Couldn't determine system directory. Try the '-sysdir' command
line parameter or set the environment variable LYX_DIR_12x to the LyX system
directory containing the file `chkconfig.ltx'.
Using built-in
Hello!
I'm currently using LyX 1.2.1 to write my thesis in Mathematics. I use the document
class article, AMS. That leads to the phrases Theorem, Proof and Remark etc.
I want to have the german translations Satz, Beweis and Bemerkung etc.
Does LyX 1.3.1 support this?
And for you Knoppix users
On Fri, 21 Mar 2003, Wolfgang Engelmann wrote:
| I tried to find a solution by reading the help files but could not
| manage. Its probably something easy (perhaps just copying the configure
| file from /usr/local/share/lyx into
| /usr/share/lyx/
how about make a symbolic link in /usr/share.
Good morning
Thank you for your help. I've added the class and I've run techhash. I have now the
class Article (IEEEtran) in the layoutdocumentdocument.
But, I have a problem with the author command:
\author{\authorblockN{A1, A2}\authorblockA{affiliation}}
when I preview the article (I use the PS
Osvaldo == Osvaldo Fornaro [EMAIL PROTECTED] writes:
Osvaldo Hi list, I just upgrade my lyx installation to 1.3.1 and
Osvaldo notice that Frontmatter style, added to elsevier layout to
Osvaldo generate frontmatter page did not appear anymore. I need to
Osvaldo add several authors with several
Kevin == Kevin Gross [EMAIL PROTECTED] writes:
Kevin I'd be glad to provide any additional information. If it is
Kevin possible on the Mac, I'd also like to know how to build with
Kevin the qt interface. If I use gcc3, the configuration stage using
Kevin % ./configure --with-frontend=qt
Kevin
Bo == Bo Peng [EMAIL PROTECTED] writes:
No, it's the opengl (3D rendering) libraries. If you don't have it,
then you must compile a Qt version that doesn't include the
support.
Bo I found the lib and use --with-extra-lib to refer to it. I can
Bo then configure and make. However, make stops
Hi!
In the book document class, how do I change the page number location?
It seems right now to be on the top and right margins specified (1.25
and 1 inch, respectively) but my requirements are that the page number
be at 0.5 inch in the corner. Thanks.
myriam
El Vie 21 Mar 2003 06:31, escribió:
Osvaldo == Osvaldo Fornaro [EMAIL PROTECTED] writes:
Osvaldo Hi list, I just upgrade my lyx installation to 1.3.1 and
Osvaldo notice that Frontmatter style, added to elsevier layout to
Osvaldo generate frontmatter page did not appear anymore. I need to
Hi,
I had the same problem. I solved it by copying elsart.layout to my home
directory and adding lines:
Style StandartInTitle
CopyStyle Standard
InTitle 1
end
Now, I use StandartInTitle for latex inset with \author, etc.
It is probably not nice and elegant, but it
Bo I found the lib and use --with-extra-lib to refer to it. I can
Bo then configure and make. However, make stops with error message:
Bo can not find ... lib. It works again after I set setenv
Bo LD_LIBRARY_PATH 'every lib pathes'
What is this exact path? What libs? Did you set
El Vie 21 Mar 2003 09:11, Vaclav Smidl escribi:
Hi,
I had the same problem. I solved it by copying elsart.layout to my home
directory and adding lines:
Style StandartInTitle
CopyStyle Standard
InTitle 1
end
Now, I use StandartInTitle for latex inset with \author, etc.
On Thu, 2003-03-20 at 18:01, Andre Poenitz wrote:
On Thu, Mar 20, 2003 at 05:34:43PM +0100, Paco Cruz wrote:
\leavevmode\leaders\hrule height 3pt\hfill\kern0mm
Curious as I am, I have fiddled with the command and found that
\leaders\hrule works ok too, (what's \leavevmode for?)
As the subject says, how can I insert big parentheses into my
multiline equation such that the left parenthesis is on line before the
right parenthesis? Using the standard parenthesis instead of Alt-M ( works
but gives too small parenthesis. I don't mind too much even if I have to
size them by
I had the same problem (Mandrake 9.0) even if qt3-devel was previously installed.
Here is my solution if you decide to compile from rpm source.
As root, after downloading lyx-1.3.1-1-qt.src.rpm, in a terminal:
ln -s /usr/lib/qt3 /usr/lib/qt
QTDIR=/usr/lib/qt
PATH=$QTDIR/bin:$PATH
On Fri, Mar 21, 2003 at 05:53:09PM +0200, Tuukka Toivonen wrote:
As the subject says, how can I insert big parentheses into my
multiline equation such that the left parenthesis is on line before the
right parenthesis? Using the standard parenthesis instead of Alt-M ( works
but gives too small
On Fri, Mar 21, 2003 at 06:14:48AM -0500, Myriam Abramson wrote:
In the book document class, how do I change the page number location?
It seems right now to be on the top and right margins specified (1.25
and 1 inch, respectively) but my requirements are that the page number
be at 0.5 inch
On Fri, Mar 21, 2003 at 10:00:29AM +0100, Jens Thos wrote:
Hello!
I'm currently using LyX 1.2.1 to write my thesis in Mathematics. I use the document
class article, AMS. That leads to the phrases Theorem, Proof and Remark etc.
I want to have the german translations Satz, Beweis and
On Thu, Mar 20, 2003 at 02:35:32PM +0100, EXT / TEAMLOG MELLERIN Pierrick wrote:
Hello,
Is it possible to use book document (not book (AMS)) with environments
like theorem, corollary, example, ... ? I would prefer use book in
place of book (AMS) for questions of formatting on the screen and
On Wed, Mar 19, 2003 at 01:20:52PM -0600, Todd Flaming wrote:
How do I get book to use chapter endnotes instead of footnotes?
Use the endnotes package (read the file endnotes.sty for the documentation)
On Tue, Mar 18, 2003 at 11:52:36PM -0800, [EMAIL PROTECTED] wrote:
1) Why doesn't format-doc-fonts work? I set to helvitica and it stays with
Times. But helv is not lacking on my system and format character works. Is
this broken? ... not implemented yet? For a certain type of doc I want all
On Tue, Mar 18, 2003 at 10:03:34PM +0100, Robert Neumann wrote:
Hi,
I'm using lyx 1.2.0 and I have set the font size for the whole document to 11
pt.
Now I would like to change the size for one one chapter to 10 pt. How can I do
this, it should be pretty simple, but I could not figure it
On Mon, Mar 17, 2003 at 06:40:08AM +0300, Munzir Taha wrote:
First, although I could write arabic well with arabtex, I couldn't mix Arabic
and English in the same document.
Example: if I typed the letter h and view the pdf file, I get the Arabic
letter WAW. If I select this same letter h and
Hi group,
I sometimes need sourcecode examples in my documents. I already know, that
the LyX environment Lyx-Code must be used for that.
However, I haven't found a comfortable way to import sourcecode from an
existing ASCII-file without loosing all the formatting - i.e. the
indentation with
Hi group,
in case anyone else is having the same problems (aclocal-1.6: command not
found) with patching 1.3.0 sources to 1.3.1 with the provided patchfile:
I have been able to work around that problem by using this sequence of
commands:
$ tar xvzf lyx-1.3.0.tar.gz
$ cd lyx-1.3.0
$
Hi group,
I am new to Lyx. While reading through the Customization Guide, I found
that the screen fonts could be changed to scalable fonts. The suggested
Utopia font works fine here as serif-font.
However, is there a suggestion for a sans-serif scalable font?
I found something in my list
Hi.. I'm having trouble with some simple math in the math editor.. I'm getting
errors saying there are missing $, } etc.. I'm attaching a sample file here
which has 2 lines of math text that gives me 15 errors. Please let me know what
needs to be done to correct this (if it can be corrected by the
Could somebody please give me a hint what I have to do after this warning:
LyX Warning! Couldn't determine system directory. Try the '-sysdir' command
line parameter or set the environment variable LYX_DIR_12x to the LyX system
directory containing the file `chkconfig.ltx'.
Using built-in
Hello!
I'm currently using LyX 1.2.1 to write my thesis in Mathematics. I use the document
class article, AMS. That leads to the phrases Theorem, Proof and Remark etc.
I want to have the german translations Satz, Beweis and Bemerkung etc.
Does LyX 1.3.1 support this?
And for you Knoppix users
On Fri, 21 Mar 2003, Wolfgang Engelmann wrote:
| I tried to find a solution by reading the help files but could not
| manage. Its probably something easy (perhaps just copying the configure
| file from /usr/local/share/lyx into
| /usr/share/lyx/
how about make a symbolic link in /usr/share.
Good morning
Thank you for your help. I've added the class and I've run techhash. I have now the
class Article (IEEEtran) in the layoutdocumentdocument.
But, I have a problem with the author command:
\author{\authorblockN{A1, A2}\authorblockA{affiliation}}
when I preview the article (I use the PS
Osvaldo == Osvaldo Fornaro [EMAIL PROTECTED] writes:
Osvaldo Hi list, I just upgrade my lyx installation to 1.3.1 and
Osvaldo notice that Frontmatter style, added to elsevier layout to
Osvaldo generate frontmatter page did not appear anymore. I need to
Osvaldo add several authors with several
Kevin == Kevin Gross [EMAIL PROTECTED] writes:
Kevin I'd be glad to provide any additional information. If it is
Kevin possible on the Mac, I'd also like to know how to build with
Kevin the qt interface. If I use gcc3, the configuration stage using
Kevin % ./configure --with-frontend=qt
Kevin
Bo == Bo Peng [EMAIL PROTECTED] writes:
No, it's the opengl (3D rendering) libraries. If you don't have it,
then you must compile a Qt version that doesn't include the
support.
Bo I found the lib and use --with-extra-lib to refer to it. I can
Bo then configure and make. However, make stops
Hi!
In the book document class, how do I change the page number location?
It seems right now to be on the top and right margins specified (1.25
and 1 inch, respectively) but my requirements are that the page number
be at 0.5 inch in the corner. Thanks.
myriam
El Vie 21 Mar 2003 06:31, escribió:
Osvaldo == Osvaldo Fornaro [EMAIL PROTECTED] writes:
Osvaldo Hi list, I just upgrade my lyx installation to 1.3.1 and
Osvaldo notice that Frontmatter style, added to elsevier layout to
Osvaldo generate frontmatter page did not appear anymore. I need to
Hi,
I had the same problem. I solved it by copying elsart.layout to my home
directory and adding lines:
Style StandartInTitle
CopyStyle Standard
InTitle 1
end
Now, I use StandartInTitle for latex inset with \author, etc.
It is probably not nice and elegant, but it
Bo I found the lib and use --with-extra-lib to refer to it. I can
Bo then configure and make. However, make stops with error message:
Bo can not find ... lib. It works again after I set setenv
Bo LD_LIBRARY_PATH 'every lib pathes'
What is this exact path? What libs? Did you set
El Vie 21 Mar 2003 09:11, Vaclav Smidl escribi:
Hi,
I had the same problem. I solved it by copying elsart.layout to my home
directory and adding lines:
Style StandartInTitle
CopyStyle Standard
InTitle 1
end
Now, I use StandartInTitle for latex inset with \author, etc.
On Thu, 2003-03-20 at 18:01, Andre Poenitz wrote:
On Thu, Mar 20, 2003 at 05:34:43PM +0100, Paco Cruz wrote:
\leavevmode\leaders\hrule height 3pt\hfill\kern0mm
Curious as I am, I have fiddled with the command and found that
\leaders\hrule works ok too, (what's \leavevmode for?)
As the subject says, how can I insert big parentheses into my
multiline equation such that the left parenthesis is on line before the
right parenthesis? Using the standard parenthesis instead of Alt-M ( works
but gives too small parenthesis. I don't mind too much even if I have to
size them by
I had the same problem (Mandrake 9.0) even if qt3-devel was previously installed.
Here is my solution if you decide to compile from rpm source.
As root, after downloading lyx-1.3.1-1-qt.src.rpm, in a terminal:
ln -s /usr/lib/qt3 /usr/lib/qt
QTDIR=/usr/lib/qt
PATH=$QTDIR/bin:$PATH
On Fri, Mar 21, 2003 at 05:53:09PM +0200, Tuukka Toivonen wrote:
As the subject says, how can I insert big parentheses into my
multiline equation such that the left parenthesis is on line before the
right parenthesis? Using the standard parenthesis instead of Alt-M ( works
but gives too small
On Fri, Mar 21, 2003 at 06:14:48AM -0500, Myriam Abramson wrote:
In the book document class, how do I change the page number location?
It seems right now to be on the top and right margins specified (1.25
and 1 inch, respectively) but my requirements are that the page number
be at 0.5 inch
On Fri, Mar 21, 2003 at 10:00:29AM +0100, Jens Thos wrote:
Hello!
I'm currently using LyX 1.2.1 to write my thesis in Mathematics. I use the document
class article, AMS. That leads to the phrases Theorem, Proof and Remark etc.
I want to have the german translations Satz, Beweis and
On Thu, Mar 20, 2003 at 02:35:32PM +0100, EXT / TEAMLOG MELLERIN Pierrick wrote:
Hello,
Is it possible to use book document (not book (AMS)) with environments
like theorem, corollary, example, ... ? I would prefer use book in
place of book (AMS) for questions of formatting on the screen and
On Wed, Mar 19, 2003 at 01:20:52PM -0600, Todd Flaming wrote:
How do I get book to use chapter endnotes instead of footnotes?
Use the endnotes package (read the file endnotes.sty for the documentation)
On Tue, Mar 18, 2003 at 11:52:36PM -0800, [EMAIL PROTECTED] wrote:
1) Why doesn't format-doc-fonts work? I set to helvitica and it stays with
Times. But helv is not lacking on my system and format character works. Is
this broken? ... not implemented yet? For a certain type of doc I want all
On Tue, Mar 18, 2003 at 10:03:34PM +0100, Robert Neumann wrote:
Hi,
I'm using lyx 1.2.0 and I have set the font size for the whole document to 11
pt.
Now I would like to change the size for one one chapter to 10 pt. How can I do
this, it should be pretty simple, but I could not figure it
On Mon, Mar 17, 2003 at 06:40:08AM +0300, Munzir Taha wrote:
First, although I could write arabic well with arabtex, I couldn't mix Arabic
and English in the same document.
Example: if I typed the letter h and view the pdf file, I get the Arabic
letter WAW. If I select this same letter h and
Hi group,
I sometimes need sourcecode examples in my documents. I already know, that
the LyX environment Lyx-Code must be used for that.
However, I haven't found a comfortable way to import sourcecode from an
existing ASCII-file without loosing all the formatting - i.e. the
indentation with
Hi group,
in case anyone else is having the same problems (aclocal-1.6: command not
found) with patching 1.3.0 sources to 1.3.1 with the provided patchfile:
I have been able to work around that problem by using this sequence of
commands:
$ tar xvzf lyx-1.3.0.tar.gz
$ cd lyx-1.3.0
$
Hi group,
I am new to Lyx. While reading through the Customization Guide, I found
that the screen fonts could be changed to scalable fonts. The suggested
Utopia font works fine here as serif-font.
However, is there a suggestion for a sans-serif scalable font?
I found something in my list
Hi.. I'm having trouble with some simple math in the math editor.. I'm getting
errors saying there are missing $, } etc.. I'm attaching a sample file here
which has 2 lines of math text that gives me 15 errors. Please let me know what
needs to be done to correct this (if it can be corrected by the
Could somebody please give me a hint what I have to do after this warning:
LyX Warning! Couldn't determine system directory. Try the '-sysdir' command
line parameter or set the environment variable LYX_DIR_12x to the LyX system
directory containing the file `chkconfig.ltx'.
Using built-in
Hello!
I'm currently using LyX 1.2.1 to write my thesis in Mathematics. I use the document
class "article, AMS". That leads to the phrases "Theorem", "Proof" and "Remark" etc.
I want to have the german translations "Satz", "Beweis" and "Bemerkung" etc.
Does LyX 1.3.1 support this?
And for you
On Fri, 21 Mar 2003, Wolfgang Engelmann wrote:
| I tried to find a solution by reading the help files but could not
| manage. Its probably something easy (perhaps just copying the configure
| file from /usr/local/share/lyx into
| /usr/share/lyx/
how about make a symbolic link in /usr/share.
Good morning
Thank you for your help. I've added the class and I've run techhash. I have now the
class Article (IEEEtran) in the layout>document>document.
But, I have a problem with the author command:
\author{\authorblockN{A1, A2}\authorblockA{affiliation}}
when I preview the article (I use the
> "Osvaldo" == Osvaldo Fornaro <[EMAIL PROTECTED]> writes:
Osvaldo> Hi list, I just upgrade my lyx installation to 1.3.1 and
Osvaldo> notice that Frontmatter style, added to elsevier layout to
Osvaldo> generate frontmatter page did not appear anymore. I need to
Osvaldo> add several authors
> "Kevin" == Kevin Gross <[EMAIL PROTECTED]> writes:
Kevin> I'd be glad to provide any additional information. If it is
Kevin> possible on the Mac, I'd also like to know how to build with
Kevin> the qt interface. If I use gcc3, the configuration stage using
Kevin> % ./configure
> "Bo" == Bo Peng <[EMAIL PROTECTED]> writes:
>> No, it's the opengl (3D rendering) libraries. If you don't have it,
>> then you must compile a Qt version that doesn't include the
>> support.
Bo> I found the lib and use --with-extra-lib to refer to it. I can
Bo> then configure and make.
Hi!
In the book document class, how do I change the page number location?
It seems right now to be on the top and right margins specified (1.25
and 1 inch, respectively) but my requirements are that the page number
be at 0.5 inch in the corner. Thanks.
myriam
El Vie 21 Mar 2003 06:31, escribió:
> > "Osvaldo" == Osvaldo Fornaro <[EMAIL PROTECTED]> writes:
>
> Osvaldo> Hi list, I just upgrade my lyx installation to 1.3.1 and
> Osvaldo> notice that Frontmatter style, added to elsevier layout to
> Osvaldo> generate frontmatter page did not appear
Hi,
I had the same problem. I solved it by copying elsart.layout to my home
directory and adding lines:
Style StandartInTitle
CopyStyle Standard
InTitle 1
end
Now, I use "StandartInTitle" for latex inset with \author, etc.
It is probably not nice and elegant, but it
> Bo> I found the lib and use --with-extra-lib to refer to it. I can
> Bo> then configure and make. However, make stops with error message:
> Bo> can not find ... lib. It works again after I set setenv
> Bo> LD_LIBRARY_PATH 'every lib pathes'
> What is this exact path? What libs? Did you set
El Vie 21 Mar 2003 09:11, Vaclav Smidl escribió:
> Hi,
> I had the same problem. I solved it by copying elsart.layout to my home
> directory and adding lines:
>
> Style StandartInTitle
> CopyStyle Standard
> InTitle 1
> end
>
> Now, I use "StandartInTitle" for latex inset with
On Thu, 2003-03-20 at 18:01, Andre Poenitz wrote:
> On Thu, Mar 20, 2003 at 05:34:43PM +0100, Paco Cruz wrote:
> > > \leavevmode\leaders\hrule height 3pt\hfill\kern0mm
> >
> > Curious as I am, I have fiddled with the command and found that
> >
> > \leaders\hrule works ok too, (what's
As the subject says, how can I insert big parentheses into my
multiline equation such that the left parenthesis is on line before the
right parenthesis? Using the standard parenthesis instead of Alt-M ( works
but gives too small parenthesis. I don't mind too much even if I have to
size them by
I had the same problem (Mandrake 9.0) even if qt3-devel was previously installed.
Here is my solution if you decide to compile from rpm source.
As root, after downloading lyx-1.3.1-1-qt.src.rpm, in a terminal:
ln -s /usr/lib/qt3 /usr/lib/qt
QTDIR=/usr/lib/qt
PATH=$QTDIR/bin:$PATH
On Fri, Mar 21, 2003 at 05:53:09PM +0200, Tuukka Toivonen wrote:
> As the subject says, how can I insert big parentheses into my
> multiline equation such that the left parenthesis is on line before the
> right parenthesis? Using the standard parenthesis instead of Alt-M ( works
> but gives too
On Fri, Mar 21, 2003 at 06:14:48AM -0500, Myriam Abramson wrote:
>
> In the book document class, how do I change the page number location?
> It seems right now to be on the top and right margins specified (1.25
> and 1 inch, respectively) but my requirements are that the page number
> be at 0.5
On Fri, Mar 21, 2003 at 10:00:29AM +0100, Jens Thos wrote:
> Hello!
>
> I'm currently using LyX 1.2.1 to write my thesis in Mathematics. I use the document
> class "article, AMS". That leads to the phrases "Theorem", "Proof" and "Remark" etc.
> I want to have the german translations "Satz",
On Thu, Mar 20, 2003 at 02:35:32PM +0100, EXT / TEAMLOG MELLERIN Pierrick wrote:
> Hello,
>
> Is it possible to use book document (not "book (AMS)") with environments
> like "theorem", "corollary", "example", ... ? I would prefer use "book" in
> place of "book (AMS)" for questions of formatting
On Wed, Mar 19, 2003 at 01:20:52PM -0600, Todd Flaming wrote:
> How do I get book to use chapter endnotes instead of footnotes?
Use the endnotes package (read the file endnotes.sty for the documentation)
On Tue, Mar 18, 2003 at 11:52:36PM -0800, [EMAIL PROTECTED] wrote:
>
> 1) Why doesn't format-doc-fonts work? I set to helvitica and it stays with
> Times. But helv is not lacking on my system and format character works. Is
> this broken? ... not implemented yet? For a certain type of doc I want
On Tue, Mar 18, 2003 at 10:03:34PM +0100, Robert Neumann wrote:
> Hi,
> I'm using lyx 1.2.0 and I have set the font size for the whole document to 11
> pt.
> Now I would like to change the size for one one chapter to 10 pt. How can I do
> this, it should be pretty simple, but I could not figure
On Mon, Mar 17, 2003 at 06:40:08AM +0300, Munzir Taha wrote:
> First, although I could write arabic well with arabtex, I couldn't mix Arabic
> and English in the same document.
> Example: if I typed the letter "h" and view the pdf file, I get the Arabic
> letter "WAW". If I select this same
Hi group,
I sometimes need sourcecode examples in my documents. I already know, that
the LyX environment "Lyx-Code" must be used for that.
However, I haven't found a comfortable way to import sourcecode from an
existing ASCII-file without loosing all the formatting - i.e. the
indentation with
Hi group,
in case anyone else is having the same problems ("aclocal-1.6: command not
found") with patching 1.3.0 sources to 1.3.1 with the provided patchfile:
I have been able to work around that problem by using this sequence of
commands:
$ tar xvzf lyx-1.3.0.tar.gz
$ cd lyx-1.3.0
Hi group,
I am new to Lyx. While reading through the Customization Guide, I found
that the screen fonts could be changed to scalable fonts. The suggested
"Utopia" font works fine here as serif-font.
However, is there a suggestion for a sans-serif scalable font?
I found something in my list
Hi.. I'm having trouble with some simple math in the math editor.. I'm getting
errors saying there are missing $, } etc.. I'm attaching a sample file here
which has 2 lines of math text that gives me 15 errors. Please let me know what
needs to be done to correct this (if it can be corrected by the
81 matches
Mail list logo