I want to insert some BibTeX-Entries in my bibliography, which I never
reference from the text. How can this be done?
you can try to put before your bibtex references (in lyx) this latex
command \nocite{*}
I don't know if it works...
it works.
cu, siggi.
--
some wear pyjamas
if only
I want to insert some BibTeX-Entries in my bibliography, which I never
reference from the text. How can this be done?
you can try to put before your bibtex references (in lyx) this latex
command \nocite{*}
I don't know if it works...
it works.
cu, siggi.
--
some wear pyjamas
if only
> > I want to insert some BibTeX-Entries in my bibliography, which I never
> > reference from the text. How can this be done?
>
> you can try to put before your bibtex references (in lyx) this latex
> command \nocite{*}
> I don't know if it works...
it works.
cu, siggi.
--
some wear pyjamas
if
On 23-Jun-99 Q Modnar wrote:
Hi, this will be my first attempt at writing a thesis using
LyX and so I've been following the discussions on the
subject which were taking place in May. Before I start
writing the thesis I'd like some info. I'd appreciate it
even if you have answers to only
Hi
Is there any possibility to combine the features of
reLyX and latex2lyx in an automatic way.
I know that for quite a while the perl script reLyX is considered as
the build in machine to convert LaTeX to LyX, however reLyX does not
convert tabular environments into WYSIWYG display.
Hi
I am stuggling with the figure placement. Here is what I need to do:
Within a technical report I have a section (within the appendix) containing all
the figures discussed in the report. As each figure needs a caption and a label
it is placed within a floating environment. There are other
"Andreas" == Andreas Busch [EMAIL PROTECTED] writes:
Andreas Hi, I am re-writing my list of publications, and I would like
Andreas to do it in the following way:
Andreas 1990 1. Economic policy, Cheltenham: Elgar. 2. The birds and
Andreas the bees, Oxford: OUP
Andreas 1991 3. New
Hello
reLyX just translated
\def\chaptername{foo}
(in a LateX file)
as
\def\chaptername{}foo
(in LyX window, TeX mode)
LyX 1.0.1, Solaris 2.6, Perl 5.004_01
Regards
--
Jean-Pierre
Michael Shannon McPherson wrote:
Hi :)
I've got an equation with about 50 terms and I've written it out in
multi
line equation mode (because otherwise it quadruple spaced between lines)
so I basically wrot out 3 or 4 terms then hit ctrl-enter to go into
multiline
mode for the next
On 23-Jun-99 Q Modnar wrote:
Hi, this will be my first attempt at writing a thesis using
LyX and so I've been following the discussions on the
subject which were taking place in May. Before I start
writing the thesis I'd like some info. I'd appreciate it
even if you have answers to only
Hi
Is there any possibility to combine the features of
reLyX and latex2lyx in an automatic way.
I know that for quite a while the perl script reLyX is considered as
the build in machine to convert LaTeX to LyX, however reLyX does not
convert tabular environments into WYSIWYG display.
Hi
I am stuggling with the figure placement. Here is what I need to do:
Within a technical report I have a section (within the appendix) containing all
the figures discussed in the report. As each figure needs a caption and a label
it is placed within a floating environment. There are other
"Andreas" == Andreas Busch [EMAIL PROTECTED] writes:
Andreas Hi, I am re-writing my list of publications, and I would like
Andreas to do it in the following way:
Andreas 1990 1. Economic policy, Cheltenham: Elgar. 2. The birds and
Andreas the bees, Oxford: OUP
Andreas 1991 3. New
Hello
reLyX just translated
\def\chaptername{foo}
(in a LateX file)
as
\def\chaptername{}foo
(in LyX window, TeX mode)
LyX 1.0.1, Solaris 2.6, Perl 5.004_01
Regards
--
Jean-Pierre
Michael Shannon McPherson wrote:
Hi :)
I've got an equation with about 50 terms and I've written it out in
multi
line equation mode (because otherwise it quadruple spaced between lines)
so I basically wrot out 3 or 4 terms then hit ctrl-enter to go into
multiline
mode for the next
On 23-Jun-99 Q Modnar wrote:
> Hi, this will be my first attempt at writing a thesis using
> LyX and so I've been following the discussions on the
> subject which were taking place in May. Before I start
> writing the thesis I'd like some info. I'd appreciate it
> even if you have answers to
Hi
Is there any possibility to combine the features of
reLyX and latex2lyx in an automatic way.
I know that for quite a while the perl script reLyX is considered as
the build in machine to convert LaTeX to LyX, however reLyX does not
convert tabular environments into WYSIWYG display.
Hi
I am stuggling with the figure placement. Here is what I need to do:
Within a technical report I have a section (within the appendix) containing all
the figures discussed in the report. As each figure needs a caption and a label
it is placed within a floating environment. There are other
> "Andreas" == Andreas Busch <[EMAIL PROTECTED]> writes:
Andreas> Hi, I am re-writing my list of publications, and I would like
Andreas> to do it in the following way:
Andreas> 1990 1. Economic policy, Cheltenham: Elgar. 2. The birds and
Andreas> the bees, Oxford: OUP
Andreas> 1991 3. New
Hello
reLyX just translated
\def\chaptername{foo}
(in a LateX file)
as
\def\chaptername{}foo
(in LyX window, TeX mode)
LyX 1.0.1, Solaris 2.6, Perl 5.004_01
Regards
--
Jean-Pierre
Michael Shannon McPherson wrote:
> Hi :)
>I've got an equation with about 50 terms and I've written it out in
> multi
> line equation mode (because otherwise it quadruple spaced between lines)
> so I basically wrot out 3 or 4 terms then hit ctrl-enter to go into
> multiline
> mode for the
"Richard" == Richard A Bilonick [EMAIL PROTECTED] writes:
Richard I am getting the following error in LyX's LaTeX Log for an 18
Richard page document (with many tables):
Richard ! TeX capacity exceeded, sorry [main memory size=263001]
Richard template \hkip \tabcolsep {\hskip 1sp\ignorespaces
Jean-Marc,
Thanks for the suggestion.
Here is what I have done. I have one very large table.
I wanted to place it in one table float. But when I
check long table (to cause it to break across pages),
it never splits across pages. So instead I made 8
separate tables by hand. After doing this,
"Richard" == Richard A Bilonick [EMAIL PROTECTED] writes:
Richard Jean-Marc, Thanks for the suggestion.
Richard Here is what I have done. I have one very large table. I
Richard wanted to place it in one table float. But when I check long
Richard table (to cause it to break across pages), it
Is it possible to divide bibliography part of a lyx document into two or
more sections (for example: books, articles, video, etc.) If possible
how? Is it possible to start numbering from 1 for each section in the
bibliography...
Date: Wed, 23 Jun 1999 20:29:36 +0300
From: root [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Question about bibliography
Is it possible to divide bibliography part of a lyx document into two or
more sections (for example: books, articles, video, etc.) If possible
how? Is it
Hi,
I am re-writing my list of publications, and I would like to do it in the following
way:
1990
1. Economic policy, Cheltenham: Elgar.
2. The birds and the bees, Oxford: OUP
1991
3. New developments in theory, in: Journal of Whatever, pp. 23-25
4. Why
On Wed, 23 Jun 1999, Felciano, Ramon wrote:
1. Boldface typefaces (e.g. those used in most headings) appear jagged,
as if they were rendered at a different size and then stretched up.
2. Fonts are much smaller: setting Options - Screen Options - Font
Zoom to 100 on my desktop produces very
"Richard" == Richard A Bilonick [EMAIL PROTECTED] writes:
Richard I am getting the following error in LyX's LaTeX Log for an 18
Richard page document (with many tables):
Richard ! TeX capacity exceeded, sorry [main memory size=263001]
Richard template \hkip \tabcolsep {\hskip 1sp\ignorespaces
Jean-Marc,
Thanks for the suggestion.
Here is what I have done. I have one very large table.
I wanted to place it in one table float. But when I
check long table (to cause it to break across pages),
it never splits across pages. So instead I made 8
separate tables by hand. After doing this,
"Richard" == Richard A Bilonick [EMAIL PROTECTED] writes:
Richard Jean-Marc, Thanks for the suggestion.
Richard Here is what I have done. I have one very large table. I
Richard wanted to place it in one table float. But when I check long
Richard table (to cause it to break across pages), it
Is it possible to divide bibliography part of a lyx document into two or
more sections (for example: books, articles, video, etc.) If possible
how? Is it possible to start numbering from 1 for each section in the
bibliography...
Date: Wed, 23 Jun 1999 20:29:36 +0300
From: root [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Question about bibliography
Is it possible to divide bibliography part of a lyx document into two or
more sections (for example: books, articles, video, etc.) If possible
how? Is it
Hi,
I am re-writing my list of publications, and I would like to do it in the following
way:
1990
1. Economic policy, Cheltenham: Elgar.
2. The birds and the bees, Oxford: OUP
1991
3. New developments in theory, in: Journal of Whatever, pp. 23-25
4. Why
On Wed, 23 Jun 1999, Felciano, Ramon wrote:
1. Boldface typefaces (e.g. those used in most headings) appear jagged,
as if they were rendered at a different size and then stretched up.
2. Fonts are much smaller: setting Options - Screen Options - Font
Zoom to 100 on my desktop produces very
> "Richard" == Richard A Bilonick <[EMAIL PROTECTED]> writes:
Richard> I am getting the following error in LyX's LaTeX Log for an 18
Richard> page document (with many tables):
Richard> ! TeX capacity exceeded, sorry [main memory size=263001]
Richard> \hkip \tabcolsep {\hskip
Jean-Marc,
Thanks for the suggestion.
Here is what I have done. I have one very large table.
I wanted to place it in one table float. But when I
check long table (to cause it to break across pages),
it never splits across pages. So instead I made 8
separate tables by hand. After doing this,
> "Richard" == Richard A Bilonick <[EMAIL PROTECTED]> writes:
Richard> Jean-Marc, Thanks for the suggestion.
Richard> Here is what I have done. I have one very large table. I
Richard> wanted to place it in one table float. But when I check long
Richard> table (to cause it to break across
Is it possible to divide bibliography part of a lyx document into two or
more sections (for example: books, articles, video, etc.) If possible
how? Is it possible to start numbering from 1 for each section in the
bibliography...
>> Date: Wed, 23 Jun 1999 20:29:36 +0300
>> From: root <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED]
>> Subject: Question about bibliography
>>
>> Is it possible to divide bibliography part of a lyx document into two or
>> more sections (for example: books, articles, video, etc.) If possible
>>
Hi,
I am re-writing my list of publications, and I would like to do it in the following
way:
1990
1. Economic policy, Cheltenham: Elgar.
2. The birds and the bees, Oxford: OUP
1991
3. New developments in theory, in: Journal of Whatever, pp. 23-25
4. Why
On Wed, 23 Jun 1999, Felciano, Ramon wrote:
> 1. Boldface typefaces (e.g. those used in most headings) appear jagged,
> as if they were rendered at a different size and then stretched up.
> 2. Fonts are much smaller: setting Options -> Screen Options -> Font
> Zoom to 100 on my desktop produces
Kaare Rasmussen [EMAIL PROTECTED] writes:
| I'd like to write a book in two columns. But sometimes there will be a
| programming example that is supposed to span the columns. These
| examples may be longer than one page.
|
| I can't seem to find the solution for this. Neither floats, tables or
"Eduardo" == Eduardo M A M Mendes [EMAIL PROTECTED] writes:
Eduardo Hello Somehow I lost the pointer to NT Lyx web site. Would
Eduardo someone be kind enough to send it to me again? Thanks a lot
Here you are:
http://www.cs.uu.nl/~steven/personal/lyx/lyx.html
JMarc
On Wed, 23 Jun 1999, Andre' Poenitz wrote:
Demo in attached file. ( I've tried it, it works with version 1.0.3pre4 )
``He said `Forget it!' to me''
I think you missed the point. John's problem occurs when there are
a single and a double quote in a row.
I did. John I have sorted
"John" == John Wetterau [EMAIL PROTECTED] writes:
John Has anyone noticed that single and double quotes get inverted in
John the printout? eg. "He said to me, 'Forget it!'" prints as: "He
John said to me, 'Forget it!"' This is a minor but annoying bug if
John you are writing a lot of dialog.
I looked around some more.
I tried "ltoh" (Latex to html) but it gives a huge number
of error messages -- it can't understand most of the
latex commands.
I tried "tth" (Tex to html) and it works very well.
I only scanned the user manual (of course I had to
use tth before reading the
| I'd like to write a book in two columns. But sometimes there will be a
| programming example that is supposed to span the columns. These
| examples may be longer than one page.
Use a wide float:
Insert-Floats-Wide Table Float
This only takes care of the column problem. It doesn't seem to
Kaare Rasmussen [EMAIL PROTECTED] writes:
| | I'd like to write a book in two columns. But sometimes there will be a
| | programming example that is supposed to span the columns. These
| | examples may be longer than one page.
| Use a wide float:
| Insert-Floats-Wide Table Float
|
| This
Kaare Rasmussen [EMAIL PROTECTED] writes:
| I'd like to write a book in two columns. But sometimes there will be a
| programming example that is supposed to span the columns. These
| examples may be longer than one page.
|
| I can't seem to find the solution for this. Neither floats, tables or
"Eduardo" == Eduardo M A M Mendes [EMAIL PROTECTED] writes:
Eduardo Hello Somehow I lost the pointer to NT Lyx web site. Would
Eduardo someone be kind enough to send it to me again? Thanks a lot
Here you are:
http://www.cs.uu.nl/~steven/personal/lyx/lyx.html
JMarc
On Wed, 23 Jun 1999, Andre' Poenitz wrote:
Demo in attached file. ( I've tried it, it works with version 1.0.3pre4 )
``He said `Forget it!' to me''
I think you missed the point. John's problem occurs when there are
a single and a double quote in a row.
I did. John I have sorted
"John" == John Wetterau [EMAIL PROTECTED] writes:
John Has anyone noticed that single and double quotes get inverted in
John the printout? eg. "He said to me, 'Forget it!'" prints as: "He
John said to me, 'Forget it!"' This is a minor but annoying bug if
John you are writing a lot of dialog.
I looked around some more.
I tried "ltoh" (Latex to html) but it gives a huge number
of error messages -- it can't understand most of the
latex commands.
I tried "tth" (Tex to html) and it works very well.
I only scanned the user manual (of course I had to
use tth before reading the
| I'd like to write a book in two columns. But sometimes there will be a
| programming example that is supposed to span the columns. These
| examples may be longer than one page.
Use a wide float:
Insert-Floats-Wide Table Float
This only takes care of the column problem. It doesn't seem to
Kaare Rasmussen [EMAIL PROTECTED] writes:
| | I'd like to write a book in two columns. But sometimes there will be a
| | programming example that is supposed to span the columns. These
| | examples may be longer than one page.
| Use a wide float:
| Insert-Floats-Wide Table Float
|
| This
Kaare Rasmussen <[EMAIL PROTECTED]> writes:
| I'd like to write a book in two columns. But sometimes there will be a
| programming example that is supposed to span the columns. These
| examples may be longer than one page.
|
| I can't seem to find the solution for this. Neither floats, tables
> "Eduardo" == Eduardo M A M Mendes <[EMAIL PROTECTED]> writes:
Eduardo> Hello Somehow I lost the pointer to NT Lyx web site. Would
Eduardo> someone be kind enough to send it to me again? Thanks a lot
Here you are:
http://www.cs.uu.nl/~steven/personal/lyx/lyx.html
JMarc
On Wed, 23 Jun 1999, Andre' Poenitz wrote:
> > Demo in attached file. ( I've tried it, it works with version 1.0.3pre4 )
> >
> > ``He said `Forget it!' to me''
>
>
> I think you missed the point. John's problem occurs when there are
> a single and a double quote in a row.
I did. John & I
> "John" == John Wetterau <[EMAIL PROTECTED]> writes:
John> Has anyone noticed that single and double quotes get inverted in
John> the printout? eg. "He said to me, 'Forget it!'" prints as: "He
John> said to me, 'Forget it!"' This is a minor but annoying bug if
John> you are writing a lot
I looked around some more.
I tried "ltoh" (Latex to html) but it gives a huge number
of error messages -- it can't understand most of the
latex commands.
I tried "tth" (Tex to html) and it works very well.
I only scanned the user manual (of course I had to
use tth before reading the
> | I'd like to write a book in two columns. But sometimes there will be a
> | programming example that is supposed to span the columns. These
> | examples may be longer than one page.
> Use a wide float:
> Insert->Floats->Wide Table Float
This only takes care of the column problem. It doesn't
Kaare Rasmussen <[EMAIL PROTECTED]> writes:
| > | I'd like to write a book in two columns. But sometimes there will be a
| > | programming example that is supposed to span the columns. These
| > | examples may be longer than one page.
| > Use a wide float:
| > Insert->Floats->Wide Table Float
|
all is ok with the new version, thanks
- Original Message -
From: Jose Abilio Oliveira Matos [EMAIL PROTECTED]
To: jdd [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, June 16, 1999 10:58 AM
Subject: sgml gif
jdd writes:
I like writing in sgml for web publishing purpose.
"Julián" == Julián Muñoz Domínguez [EMAIL PROTECTED] writes:
Julián I would like to thank all the developpers and contributors for
Julián doing LyX, a really usefull software. For _me_, LaTex is
Julián meaningless without LyX.
You are *very* welcome :)
JMarc
Does anyone know how the tag \maketitle is placed? How does Lyx know the end of
my title section. I would like to achieve something like:
\newcommand Dummy[1]{\def\@dummy{#1}}
...
\title{dd}
\author{s}
\Dummy{ff}
\date{k}
now Lyx should set \maketitle, however it will place it
"Oliver" == Oliver Eichler [EMAIL PROTECTED] writes:
Oliver Does anyone know how the tag \maketitle is placed? How does
Oliver Lyx know the end of my title section. I would like to achieve
Oliver something like:
Oliver \newcommand Dummy[1]{\def\@dummy{#1}} ... \title{dd}
Oliver
In the layout files, the layouts that should appear before \maketitle
are marked with
InTitle 1
So you should do the same for your Dummy layout.
Hope this helps.
Perfect, that´s it. Thanks a lot (as so often in recent times :) )
oliver
---
Oliver Eichler, Dipl.-Ing.
DSP
Hi,
I exported to a LaTeX file, then tried a utility called
"latex2rtf", which is supposed to generate a Rich
Text Format file that is Microsoft compatible.
But, it aborts.
Then I tried "latex2html" and that just hangs.
So, does anyone know of any conversion utility
that can convert a Lyx
"Barry" == Barry Kauler [EMAIL PROTECTED] writes:
Barry Hi, I exported to a LaTeX file, then tried a utility called
Barry "latex2rtf", which is supposed to generate a Rich Text Format
Barry file that is Microsoft compatible. But, it aborts. Then I
Barry tried "latex2html" and that just hangs.
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Hi everybody! How can I remove a line in a
Alexander multi-column-equation I created with C-Enter? Just
Alexander backspace doesn´t work!
C-k should do it.
JMarc
On 21-Jun-99 Jean-Marc Lasgouttes wrote:
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Hi everybody! How can I remove a line in a
Alexander multi-column-equation I created with C-Enter? Just
Alexander backspace doesn´t work!
C-k should do it.
JMarc
It does
Hi everybody!
Sorry, but there is another problem:
If I have a multiline-equation produced with C-Enter, I can remove the
formula-labels with M-m S-N. Why doesn´t this work with a normal math-equation
(M-m d, but no C-Enter)? How can I remove such a label?
Greets,
Alex.
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander On 21-Jun-99 Jean-Marc Lasgouttes wrote:
"Alexander" == Alexander Wollmann
[EMAIL PROTECTED] writes:
Alexander Hi everybody! How can I remove a line in a
Alexander multi-column-equation I created with C-Enter? Just
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Hi everybody! Sorry, but there is another problem:
Alexander If I have a multiline-equation produced with C-Enter, I can
Alexander remove the formula-labels with M-m S-N. Why doesn´t this
Alexander work with a normal
Salut Alexander,
How can I remove a line in a multi-column-equation I created with C-Enter? Just
backspace doesn´t work!
You can mark the line (for example by holding down Shift and pressing Down) and
then press backspace. It works for me, but it is a little bit tricky.
Regards,
Ingo
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Putting a "delete-line-forward" like in emacs.bind is not
Alexander what I want! Imagine you typed a C-Enter too much, and now
Alexander you have a last line you don´t need. I want to remove this
Alexander line (with the blue
Ingo You can mark the line (for example by holding down Shift and pressing
Ingo Down) and
Ingo then press backspace. It works for me, but it is a little bit tricky.
This does not work for me with the last line.
Try going to the third box in the last line, hold down Shift and then press the
On 21-Jun-99 Ingo Kloecker wrote:
Ingo You can mark the line (for example by holding down Shift and pressing
Ingo Down) and
Ingo then press backspace. It works for me, but it is a little bit tricky.
This does not work for me with the last line.
Try going to the third box in the last
Jean-Marc Lasgouttes wrote:
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Putting a "delete-line-forward" like in emacs.bind is not
Alexander what I want! Imagine you typed a C-Enter too much, and now
Alexander you have a last line you don´t need. I want to remove
Is it possible to place a small picture, e.g. some logo, at an absolute
location, let´s say x cm from the left paper border and y cm form the bottom
paper border?
oliver
---
Oliver Eichler, Dipl.-Ing.
DSP Solutions
Ingenieure Kellermann, Voigt, Hoepfl, Eichler und Weidner
Partnerschaft
I'd like to write a book in two columns. But sometimes there will be a
programming example that is supposed to span the columns. These
examples may be longer than one page.
I can't seem to find the solution for this. Neither floats, tables or
minpages can do this.
Can this be done, and if so,
On Mon, 21 Jun 1999, Barry Kauler wrote:
Hi,
I exported to a LaTeX file, then tried a utility called
"latex2rtf", which is supposed to generate a Rich
Text Format file that is Microsoft compatible.
But, it aborts.
Then I tried "latex2html" and that just hangs.
So, does anyone know of any
On Tue, 22 Jun 1999, John Wetterau wrote:
Has anyone noticed that single and double quotes get inverted in the printout?
eg. "He said to me, 'Forget it!'" prints as: "He said to me, 'Forget it!"'
This is a minor but annoying bug if you are writing a lot of dialog. The .lyx
file looks correct,
all is ok with the new version, thanks
- Original Message -
From: Jose Abilio Oliveira Matos [EMAIL PROTECTED]
To: jdd [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, June 16, 1999 10:58 AM
Subject: sgml gif
jdd writes:
I like writing in sgml for web publishing purpose.
"Julián" == Julián Muñoz Domínguez [EMAIL PROTECTED] writes:
Julián I would like to thank all the developpers and contributors for
Julián doing LyX, a really usefull software. For _me_, LaTex is
Julián meaningless without LyX.
You are *very* welcome :)
JMarc
Does anyone know how the tag \maketitle is placed? How does Lyx know the end of
my title section. I would like to achieve something like:
\newcommand Dummy[1]{\def\@dummy{#1}}
...
\title{dd}
\author{s}
\Dummy{ff}
\date{k}
now Lyx should set \maketitle, however it will place it
"Oliver" == Oliver Eichler [EMAIL PROTECTED] writes:
Oliver Does anyone know how the tag \maketitle is placed? How does
Oliver Lyx know the end of my title section. I would like to achieve
Oliver something like:
Oliver \newcommand Dummy[1]{\def\@dummy{#1}} ... \title{dd}
Oliver
In the layout files, the layouts that should appear before \maketitle
are marked with
InTitle 1
So you should do the same for your Dummy layout.
Hope this helps.
Perfect, that´s it. Thanks a lot (as so often in recent times :) )
oliver
---
Oliver Eichler, Dipl.-Ing.
DSP
Hi,
I exported to a LaTeX file, then tried a utility called
"latex2rtf", which is supposed to generate a Rich
Text Format file that is Microsoft compatible.
But, it aborts.
Then I tried "latex2html" and that just hangs.
So, does anyone know of any conversion utility
that can convert a Lyx
"Barry" == Barry Kauler [EMAIL PROTECTED] writes:
Barry Hi, I exported to a LaTeX file, then tried a utility called
Barry "latex2rtf", which is supposed to generate a Rich Text Format
Barry file that is Microsoft compatible. But, it aborts. Then I
Barry tried "latex2html" and that just hangs.
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Hi everybody! How can I remove a line in a
Alexander multi-column-equation I created with C-Enter? Just
Alexander backspace doesn´t work!
C-k should do it.
JMarc
On 21-Jun-99 Jean-Marc Lasgouttes wrote:
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Hi everybody! How can I remove a line in a
Alexander multi-column-equation I created with C-Enter? Just
Alexander backspace doesn´t work!
C-k should do it.
JMarc
It does
Hi everybody!
Sorry, but there is another problem:
If I have a multiline-equation produced with C-Enter, I can remove the
formula-labels with M-m S-N. Why doesn´t this work with a normal math-equation
(M-m d, but no C-Enter)? How can I remove such a label?
Greets,
Alex.
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander On 21-Jun-99 Jean-Marc Lasgouttes wrote:
"Alexander" == Alexander Wollmann
[EMAIL PROTECTED] writes:
Alexander Hi everybody! How can I remove a line in a
Alexander multi-column-equation I created with C-Enter? Just
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Hi everybody! Sorry, but there is another problem:
Alexander If I have a multiline-equation produced with C-Enter, I can
Alexander remove the formula-labels with M-m S-N. Why doesn´t this
Alexander work with a normal
Salut Alexander,
How can I remove a line in a multi-column-equation I created with C-Enter? Just
backspace doesn´t work!
You can mark the line (for example by holding down Shift and pressing Down) and
then press backspace. It works for me, but it is a little bit tricky.
Regards,
Ingo
"Alexander" == Alexander Wollmann [EMAIL PROTECTED] writes:
Alexander Putting a "delete-line-forward" like in emacs.bind is not
Alexander what I want! Imagine you typed a C-Enter too much, and now
Alexander you have a last line you don´t need. I want to remove this
Alexander line (with the blue
Ingo You can mark the line (for example by holding down Shift and pressing
Ingo Down) and
Ingo then press backspace. It works for me, but it is a little bit tricky.
This does not work for me with the last line.
Try going to the third box in the last line, hold down Shift and then press the
On 21-Jun-99 Ingo Kloecker wrote:
Ingo You can mark the line (for example by holding down Shift and pressing
Ingo Down) and
Ingo then press backspace. It works for me, but it is a little bit tricky.
This does not work for me with the last line.
Try going to the third box in the last
1 - 100 of 276 matches
Mail list logo