Soren O'Neill wrote:
No exporting (from lyx) to postscript fails: Cannot convert file.
Error while executing dvi2ps -t a4
I'm not sure, but I think that message is consistent with inability to
find (or open) the DVI file.
Wasn't his program called dvips, *not* dvi2ps? Soren: you probably
On Wed, Nov 12, 2003 at 01:12:51PM -0800, Rich Shepard wrote:
On Wed, 12 Nov 2003, Rich Shepard wrote:
A major publisher (Springer-Verlag New York) notified me yesterday that
they want to publish my book. They have a bunch of LaTeX macros they want me
to use in the preparation of the
Rich Shepard wrote:
I copied book.layout to svmono.layout. All 840 bytes worth. :-) I suppose
that I can just add the Springer .cls file to it, but ... there's a lot
there I cannot place in the very few categories I see in the .layout file.
The most important part (apart from renaming
Juergen Spitzmueller wrote:
If you want to have native support for a special environment of svmono,
don't hesitate and ask.
Actually you can just copy some of them (especially the theorem like env)
from svjour.inc (which is to be found in the layouts directory).
Jürgen.
Hallo Glacis,
An/Ab: Michael ist ab 13.11 - 24.11 weg. Aber wahescheinlich über Mail und
Tel.: +34 93 2472460 erreichbar.
Julia: ist nächste Woche von Mi - Fr. weg. 19. - 21. 11
Dietmar ist ab Fr. wieder da.
Sorry wrong address
Thanks Kayvan..
nirmal
Kayvan A. Sylvan wrote:
Use hyperref and then \href{http://the-url}{Click Here}
I think there are examples at http://www.lyx.org/help
Best regards,
---Kayvan
On Thursday 13 November 2003 10:23, Nirmal Govind wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.pdf
Am I missing the ability to add LaTeX rules of the form
\rule{2.5in}{.1mm} somewhere? I mean, I can add them in a TeX red box,
but they obviously don't show up as lines in my document.
And, in case you're wondering, I teach, so they're an easy way to make
blanks.
Todd
On Thu, Nov 13, 2003 at 05:23:53AM -0500, Nirmal Govind wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.pdf
You
Hi,
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
should be:
page 1 page n
page n-1 page 2
page 3 page n-2
...
Is that with LyX or LaTeX possible? If yes, how?
--
Regards
Hartmut Haase
Hungerhilfe: http://www.thehungersite.com
Das heutige Motto:
Macho does not prove
On Thu, Nov 13, 2003 at 12:58:13PM +0100, Hartmut Haase wrote:
Hi,
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
should be:
page 1 page n
page n-1 page 2
page 3 page n-2
...
Is that with LyX or LaTeX possible? If yes, how?
The program 'psbook' rearranges pages
On Thu, 13 Nov 2003, Hartmut Haase wrote:
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
I'm not quite sure what you mean, but with psutils and especially with
pstops you can do many kind of tricks after exported the files as
postscript. Read the manpages.
Thanks Jose' and hi Andre' ...
You managed to pick a code example showing quite a few sins ;-)
Completely unintentional I assure you.. :-) (has to be - cos I haven't
tried to understand the code anyways!)
What document class did you use?
I used pdfscreen ...
nirmal
I'm creating a multiple choice test, in which I'd like to put code
examples right after an Enumeration letter, i.e.
1. Which of the following does foo?
(a) This is code
this is more code and should be lined up with the code
above
(b) more code
code with (b)
2. Next
Nirmal Govind wrote:
Thanks Jose' and hi Andre' ...
You managed to pick a code example showing quite a few sins ;-)
Completely unintentional I assure you.. :-) (has to be - cos I
haven't tried to understand the code anyways!)
What document class did you use?
I used pdfscreen ...
On Thu, Nov 13, 2003 at 01:51:46PM +, Angus Leeming wrote:
Could you post the lyx file too? I'm writing some presentations
myself and am all in favour of ditching powerpoint ;-)
And a German translation perhaps?
I am supposed to give a talk on LyX on Dec 18... ;-)
Andre'
On Thursday 13 November 2003 13:44, Todd O'Bryan wrote:
I'm creating a multiple choice test, in which I'd like to put code
examples right after an Enumeration letter, i.e.
1. Which of the following does foo?
(a) This is code
this is more code and should be lined up with
I think the attached file here is what you want.
Jose' Matos wrote:
On Thursday 13 November 2003 13:44, Todd O'Bryan wrote:
I'm creating a multiple choice test, in which I'd like to put code
examples right after an Enumeration letter, i.e.
1. Which of the following does foo?
(a) This is code
Hi all,
I am newbie to lyx and find it powerful but sometimes difficult.
I'll take some time to get to understand all its functionalities. My
requirement at hand is to write a resume, and an already available
template will be very helpful.
Can anybody send me a lyx file of a resume or
Could you post the lyx file too? I'm writing some presentations
myself and am all in favour of ditching powerpoint ;-)
Yes, I've posted the archive here:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout for lyx and of course
the lyx
Hi... you'll find examples at:
http://wiki.lyx.org/pmwiki.php/ExampleCV/ExampleCV
nirmal
Can anybody send me a lyx file of a resume or its template. Hope
this does'nt flood the mailbox. A standard template will be the best.
Thanks,
Paras
Nirmal Govind wrote:
Could you post the lyx file too? I'm writing some presentations
myself and am all in favour of ditching powerpoint ;-)
Yes, I've posted the archive here:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout
Hartmut Haase schrieb:
Hi,
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
should be:
page 1 page n
page n-1 page 2
page 3 page n-2
...
Is that with LyX or LaTeX possible? If yes, how?
from within LyX create a new document, write in preamble:
\usepackage{pdfpages}
Nirmal Govind wrote:
And a German translation perhaps?
I am supposed to give a talk on LyX on Dec 18... ;-)
Aah I see.. German translation - sure, maybe in a few years.. :-)
Hallo,
if nirmal does agree, I can try a German translation of this nice
presentation (but with his original
I haven't seen a response from David Utidjian regarding Lyx-1.3.3-1_qt
on Fedora Core 1. So, I took the src rpm file from
ftp://ftp.lyx.org/pub/lyx/bin/1.3.3/lyx-1.3.3-1_qt.src.rpm and built
lyx-1.3.3-1_qt on a linux box running Fedora Core 1. The lyx rpm is
available at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rich Shepard wrote:
I copied book.layout to svmono.layout. All 840 bytes worth.
:-) I suppose
that I can just add the Springer .cls file to it, but ...
there's a lot there I cannot place in the very few categories I
see in the .layout file.
On Thu, Nov 13, 2003 at 05:23:53AM -0500, Nirmal Govind wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.pdf
On Thu, 13 Nov 2003 05:23:53 -0500
Nirmal Govind [EMAIL PROTECTED] wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
Hallo,
if nirmal does agree, I can try a German translation of this nice
presentation (but with his original English Lyx-version screeshots).
Might be, that we can have it shorter than in a few years ;-)
Oh sure... that would be great Bernhard... thanks! Let me know if I can
help in any way
Nirmal Govind wrote:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout for lyx and of course
the lyx and graphics files...
well, I put the pdfscreen.layout in \usr\share\lyx\layouts
and the pdfscreen2.sty in \usr\share\lyx\tex
then
and the pdfscreen2.sty in \usr\share\lyx\tex
Is the above path defined in your texmf.cnf file? (you can find where
this file is located by running kpsewhich texmf.cnf).. you probably want
to put it in your localtexmf directory (say, for e.g. at
/home/username/texmf/tex/latex/pdfscreen/ or so)..
M.B. Schiekel wrote:
Nirmal Govind wrote:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout for lyx and of
course the lyx and graphics files...
well, I put the pdfscreen.layout in \usr\share\lyx\layouts
and the pdfscreen2.sty
I seem to have version 1.3.3 installed in both /usr and /usr/local. When I
locate *.layout I find the same files -- same file size, too -- in both
/usr/share/lyx and /usr/local/share/lyx. I believe that /usr/local/ is where
it should be.
Which is the proper directory, please? I'll remove the
On Thu, Nov 13, 2003 at 09:05:06AM -0800, Rich Shepard wrote:
I seem to have version 1.3.3 installed in both /usr and /usr/local. When I
locate *.layout I find the same files -- same file size, too -- in both
/usr/share/lyx and /usr/local/share/lyx. I believe that /usr/local/ is where
it
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rich Shepard wrote:
Which is the proper directory, please? I'll remove the
duplicate.
While John Levon answered correctly that there is no proper
directory, I would add that what really matters is which LyX
you use and probably the other one
Alfredo Braunstein [EMAIL PROTECTED] wrote in
news:[EMAIL PROTECTED]:
Soren O'Neill wrote:
No exporting (from lyx) to postscript fails: Cannot convert file.
Error while executing dvi2ps -t a4
I'm not sure, but I think that message is consistent with inability
to find (or open) the DVI
[posted and mailed]
Soren O'Neill [EMAIL PROTECTED] wrote in news:[EMAIL PROTECTED]:
Just tried to print the DVI from a DVI viewer, it complains that:
The external program 'dvips', which was used to export the file,
reported an error. You might wish to look at the document info dialog
which
[posted and mailed]
Soren O'Neill [EMAIL PROTECTED] wrote in news:[EMAIL PROTECTED]:
Paul A. Rubin wrote:
Start LyX, open a document, either print it or try to export it to
PS, then (without closing LyX or the document) check the temp
directory LyX is using for that document. Is the DVI
Paul A. Rubin wrote:
dvi2ps: FATAL-- can't find DVI file 6499i.dvi
I interpret that to mean that dvi2ps was started by LyX (which in
particular means that LyX was able to find dvi2ps), but that it was given
an incorrect name for the DVI file (or else was not given the correct
path to the
Paul A. Rubin wrote:
[posted and mailed]
Soren O'Neill [EMAIL PROTECTED] wrote in news:[EMAIL PROTECTED]:
Paul A. Rubin wrote:
Start LyX, open a document, either print it or try to export it to
PS, then (without closing LyX or the document) check the temp
directory LyX is using for
Alfredo Braunstein wrote:
Paul A. Rubin wrote:
dvi2ps: FATAL-- can't find DVI file 6499i.dvi
I interpret that to mean that dvi2ps was started by LyX (which in
particular means that LyX was able to find dvi2ps), but that it was given
an incorrect name for the DVI file (or else was not
On Thu, 13 Nov 2003, Juergen Spitzmueller wrote:
Judging from a quick glance at
http://194.94.42.14/tex/latex/engigl/mono/refguide.pdf
you should get a working layout if you just copy and rename the book layout
for a start (as described in Customization). You`ll probably need some ERT
if you
On Thu, 13 Nov 2003, John Levon wrote:
There is no proper directory as such, but if you installed an RPM or
other package, it should be in /usr, but if you compiled from source,
/usr/local.
But this is really a good practice thing more than anything else.
john,
Thanks. I want it in
Nirmal Govind wrote:
Is the above path defined in your texmf.cnf file?
...
Hopefully this will do it..
well, I installed pdfscreen.layout global, so I had to change the file
permission of your pdfscreen.layout from 600 - 644, now everything is
fine - thank you very much, nirmal
()
Dear All
I am using AMS article document class and I would like to replace the label
theorem (in the DVI file) by the French corresponding one. I tried to
change it in amsmaths.inc, but I cannot find therein the proper place to
operate the replacement. Could somebody here please help me?
Thank
Hello
I am a newbie to Lyx I got a problem in converting a text that i
write in French to the HTML format
The problem is some characters such as é, è, à is badly converted to
HTML
Please help me ...
Thanks...
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rich Shepard wrote:
Thanks to you, Ingar Pareliussen, Matej, Ronald and the others
it's all working and I understand better what goes on behind
the GUI in LyX.
You're welcome!
Happy LyXing!
Matej
- --
Matej Cepl,
GPG
Trying the article(linuxdoc) option, I get 2 distinct problems. Before
delving deeper into them can anyone offer suggestions.
1. Runs OK as root but will not produce a .dvi file as a normal user.
The problem seems to be missing .pk files. Presumably a permission
problem or something wrong
Soren O'Neill wrote:
No exporting (from lyx) to postscript fails: Cannot convert file.
Error while executing dvi2ps -t a4
I'm not sure, but I think that message is consistent with inability to
find (or open) the DVI file.
Wasn't his program called dvips, *not* dvi2ps? Soren: you probably
On Wed, Nov 12, 2003 at 01:12:51PM -0800, Rich Shepard wrote:
On Wed, 12 Nov 2003, Rich Shepard wrote:
A major publisher (Springer-Verlag New York) notified me yesterday that
they want to publish my book. They have a bunch of LaTeX macros they want me
to use in the preparation of the
Rich Shepard wrote:
I copied book.layout to svmono.layout. All 840 bytes worth. :-) I suppose
that I can just add the Springer .cls file to it, but ... there's a lot
there I cannot place in the very few categories I see in the .layout file.
The most important part (apart from renaming
Juergen Spitzmueller wrote:
If you want to have native support for a special environment of svmono,
don't hesitate and ask.
Actually you can just copy some of them (especially the theorem like env)
from svjour.inc (which is to be found in the layouts directory).
Jürgen.
Hallo Glacis,
An/Ab: Michael ist ab 13.11 - 24.11 weg. Aber wahescheinlich über Mail und
Tel.: +34 93 2472460 erreichbar.
Julia: ist nächste Woche von Mi - Fr. weg. 19. - 21. 11
Dietmar ist ab Fr. wieder da.
Sorry wrong address
Thanks Kayvan..
nirmal
Kayvan A. Sylvan wrote:
Use hyperref and then \href{http://the-url}{Click Here}
I think there are examples at http://www.lyx.org/help
Best regards,
---Kayvan
On Thursday 13 November 2003 10:23, Nirmal Govind wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.pdf
Am I missing the ability to add LaTeX rules of the form
\rule{2.5in}{.1mm} somewhere? I mean, I can add them in a TeX red box,
but they obviously don't show up as lines in my document.
And, in case you're wondering, I teach, so they're an easy way to make
blanks.
Todd
On Thu, Nov 13, 2003 at 05:23:53AM -0500, Nirmal Govind wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.pdf
You
Hi,
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
should be:
page 1 page n
page n-1 page 2
page 3 page n-2
...
Is that with LyX or LaTeX possible? If yes, how?
--
Regards
Hartmut Haase
Hungerhilfe: http://www.thehungersite.com
Das heutige Motto:
Macho does not prove
On Thu, Nov 13, 2003 at 12:58:13PM +0100, Hartmut Haase wrote:
Hi,
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
should be:
page 1 page n
page n-1 page 2
page 3 page n-2
...
Is that with LyX or LaTeX possible? If yes, how?
The program 'psbook' rearranges pages
On Thu, 13 Nov 2003, Hartmut Haase wrote:
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
I'm not quite sure what you mean, but with psutils and especially with
pstops you can do many kind of tricks after exported the files as
postscript. Read the manpages.
Thanks Jose' and hi Andre' ...
You managed to pick a code example showing quite a few sins ;-)
Completely unintentional I assure you.. :-) (has to be - cos I haven't
tried to understand the code anyways!)
What document class did you use?
I used pdfscreen ...
nirmal
I'm creating a multiple choice test, in which I'd like to put code
examples right after an Enumeration letter, i.e.
1. Which of the following does foo?
(a) This is code
this is more code and should be lined up with the code
above
(b) more code
code with (b)
2. Next
Nirmal Govind wrote:
Thanks Jose' and hi Andre' ...
You managed to pick a code example showing quite a few sins ;-)
Completely unintentional I assure you.. :-) (has to be - cos I
haven't tried to understand the code anyways!)
What document class did you use?
I used pdfscreen ...
On Thu, Nov 13, 2003 at 01:51:46PM +, Angus Leeming wrote:
Could you post the lyx file too? I'm writing some presentations
myself and am all in favour of ditching powerpoint ;-)
And a German translation perhaps?
I am supposed to give a talk on LyX on Dec 18... ;-)
Andre'
On Thursday 13 November 2003 13:44, Todd O'Bryan wrote:
I'm creating a multiple choice test, in which I'd like to put code
examples right after an Enumeration letter, i.e.
1. Which of the following does foo?
(a) This is code
this is more code and should be lined up with
I think the attached file here is what you want.
Jose' Matos wrote:
On Thursday 13 November 2003 13:44, Todd O'Bryan wrote:
I'm creating a multiple choice test, in which I'd like to put code
examples right after an Enumeration letter, i.e.
1. Which of the following does foo?
(a) This is code
Hi all,
I am newbie to lyx and find it powerful but sometimes difficult.
I'll take some time to get to understand all its functionalities. My
requirement at hand is to write a resume, and an already available
template will be very helpful.
Can anybody send me a lyx file of a resume or
Could you post the lyx file too? I'm writing some presentations
myself and am all in favour of ditching powerpoint ;-)
Yes, I've posted the archive here:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout for lyx and of course
the lyx
Hi... you'll find examples at:
http://wiki.lyx.org/pmwiki.php/ExampleCV/ExampleCV
nirmal
Can anybody send me a lyx file of a resume or its template. Hope
this does'nt flood the mailbox. A standard template will be the best.
Thanks,
Paras
Nirmal Govind wrote:
Could you post the lyx file too? I'm writing some presentations
myself and am all in favour of ditching powerpoint ;-)
Yes, I've posted the archive here:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout
Hartmut Haase schrieb:
Hi,
I want to print A4 pages on A3 in a newspaper fashion, i. e. the sequence
should be:
page 1 page n
page n-1 page 2
page 3 page n-2
...
Is that with LyX or LaTeX possible? If yes, how?
from within LyX create a new document, write in preamble:
\usepackage{pdfpages}
Nirmal Govind wrote:
And a German translation perhaps?
I am supposed to give a talk on LyX on Dec 18... ;-)
Aah I see.. German translation - sure, maybe in a few years.. :-)
Hallo,
if nirmal does agree, I can try a German translation of this nice
presentation (but with his original
I haven't seen a response from David Utidjian regarding Lyx-1.3.3-1_qt
on Fedora Core 1. So, I took the src rpm file from
ftp://ftp.lyx.org/pub/lyx/bin/1.3.3/lyx-1.3.3-1_qt.src.rpm and built
lyx-1.3.3-1_qt on a linux box running Fedora Core 1. The lyx rpm is
available at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rich Shepard wrote:
I copied book.layout to svmono.layout. All 840 bytes worth.
:-) I suppose
that I can just add the Springer .cls file to it, but ...
there's a lot there I cannot place in the very few categories I
see in the .layout file.
On Thu, Nov 13, 2003 at 05:23:53AM -0500, Nirmal Govind wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.pdf
On Thu, 13 Nov 2003 05:23:53 -0500
Nirmal Govind [EMAIL PROTECTED] wrote:
Hi folks,
I made a presentation on LyX/LaTeX to the LUG here at Penn State
yesterday. Below is the link in case someone's interested in doing
something similar...
Hallo,
if nirmal does agree, I can try a German translation of this nice
presentation (but with his original English Lyx-version screeshots).
Might be, that we can have it shorter than in a few years ;-)
Oh sure... that would be great Bernhard... thanks! Let me know if I can
help in any way
Nirmal Govind wrote:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout for lyx and of course
the lyx and graphics files...
well, I put the pdfscreen.layout in \usr\share\lyx\layouts
and the pdfscreen2.sty in \usr\share\lyx\tex
then
and the pdfscreen2.sty in \usr\share\lyx\tex
Is the above path defined in your texmf.cnf file? (you can find where
this file is located by running kpsewhich texmf.cnf).. you probably want
to put it in your localtexmf directory (say, for e.g. at
/home/username/texmf/tex/latex/pdfscreen/ or so)..
M.B. Schiekel wrote:
Nirmal Govind wrote:
http://www.personal.psu.edu/nug107/lyx/LyX_PSU_LUG.tar.gz
It has the pdfscreen2.sty file, pdfscreen.layout for lyx and of
course the lyx and graphics files...
well, I put the pdfscreen.layout in \usr\share\lyx\layouts
and the pdfscreen2.sty
I seem to have version 1.3.3 installed in both /usr and /usr/local. When I
locate *.layout I find the same files -- same file size, too -- in both
/usr/share/lyx and /usr/local/share/lyx. I believe that /usr/local/ is where
it should be.
Which is the proper directory, please? I'll remove the
On Thu, Nov 13, 2003 at 09:05:06AM -0800, Rich Shepard wrote:
I seem to have version 1.3.3 installed in both /usr and /usr/local. When I
locate *.layout I find the same files -- same file size, too -- in both
/usr/share/lyx and /usr/local/share/lyx. I believe that /usr/local/ is where
it
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rich Shepard wrote:
Which is the proper directory, please? I'll remove the
duplicate.
While John Levon answered correctly that there is no proper
directory, I would add that what really matters is which LyX
you use and probably the other one
Alfredo Braunstein [EMAIL PROTECTED] wrote in
news:[EMAIL PROTECTED]:
Soren O'Neill wrote:
No exporting (from lyx) to postscript fails: Cannot convert file.
Error while executing dvi2ps -t a4
I'm not sure, but I think that message is consistent with inability
to find (or open) the DVI
[posted and mailed]
Soren O'Neill [EMAIL PROTECTED] wrote in news:[EMAIL PROTECTED]:
Just tried to print the DVI from a DVI viewer, it complains that:
The external program 'dvips', which was used to export the file,
reported an error. You might wish to look at the document info dialog
which
[posted and mailed]
Soren O'Neill [EMAIL PROTECTED] wrote in news:[EMAIL PROTECTED]:
Paul A. Rubin wrote:
Start LyX, open a document, either print it or try to export it to
PS, then (without closing LyX or the document) check the temp
directory LyX is using for that document. Is the DVI
Paul A. Rubin wrote:
dvi2ps: FATAL-- can't find DVI file 6499i.dvi
I interpret that to mean that dvi2ps was started by LyX (which in
particular means that LyX was able to find dvi2ps), but that it was given
an incorrect name for the DVI file (or else was not given the correct
path to the
Paul A. Rubin wrote:
[posted and mailed]
Soren O'Neill [EMAIL PROTECTED] wrote in news:[EMAIL PROTECTED]:
Paul A. Rubin wrote:
Start LyX, open a document, either print it or try to export it to
PS, then (without closing LyX or the document) check the temp
directory LyX is using for
Alfredo Braunstein wrote:
Paul A. Rubin wrote:
dvi2ps: FATAL-- can't find DVI file 6499i.dvi
I interpret that to mean that dvi2ps was started by LyX (which in
particular means that LyX was able to find dvi2ps), but that it was given
an incorrect name for the DVI file (or else was not
On Thu, 13 Nov 2003, Juergen Spitzmueller wrote:
Judging from a quick glance at
http://194.94.42.14/tex/latex/engigl/mono/refguide.pdf
you should get a working layout if you just copy and rename the book layout
for a start (as described in Customization). You`ll probably need some ERT
if you
On Thu, 13 Nov 2003, John Levon wrote:
There is no proper directory as such, but if you installed an RPM or
other package, it should be in /usr, but if you compiled from source,
/usr/local.
But this is really a good practice thing more than anything else.
john,
Thanks. I want it in
Nirmal Govind wrote:
Is the above path defined in your texmf.cnf file?
...
Hopefully this will do it..
well, I installed pdfscreen.layout global, so I had to change the file
permission of your pdfscreen.layout from 600 - 644, now everything is
fine - thank you very much, nirmal
()
Dear All
I am using AMS article document class and I would like to replace the label
theorem (in the DVI file) by the French corresponding one. I tried to
change it in amsmaths.inc, but I cannot find therein the proper place to
operate the replacement. Could somebody here please help me?
Thank
Hello
I am a newbie to Lyx I got a problem in converting a text that i
write in French to the HTML format
The problem is some characters such as é, è, à is badly converted to
HTML
Please help me ...
Thanks...
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rich Shepard wrote:
Thanks to you, Ingar Pareliussen, Matej, Ronald and the others
it's all working and I understand better what goes on behind
the GUI in LyX.
You're welcome!
Happy LyXing!
Matej
- --
Matej Cepl,
GPG
Trying the article(linuxdoc) option, I get 2 distinct problems. Before
delving deeper into them can anyone offer suggestions.
1. Runs OK as root but will not produce a .dvi file as a normal user.
The problem seems to be missing .pk files. Presumably a permission
problem or something wrong
Soren O'Neill wrote:
>>> No exporting (from lyx) to postscript fails: Cannot convert file.
>>> Error while executing dvi2ps -t a4
>>
>> I'm not sure, but I think that message is consistent with inability to
>> find (or open) the DVI file.
Wasn't his program called dvips, *not* dvi2ps? Soren:
On Wed, Nov 12, 2003 at 01:12:51PM -0800, Rich Shepard wrote:
> On Wed, 12 Nov 2003, Rich Shepard wrote:
>
> > A major publisher (Springer-Verlag New York) notified me yesterday that
> > they want to publish my book. They have a bunch of LaTeX macros they want me
> > to use in the preparation
1 - 100 of 147 matches
Mail list logo
