Re: [MBZ] OT: cell foniness

I've been using Republic with a Moto G4 for several months. My rural cell signal not great but similar to previous Verizon. Main plus is this setup uses WiFi (vs cell) when available and I have good WiFi in places I spend the most time. The G4 was $150 (with ads) from Amazon. The service is

Re: [MBZ] OT: cell foniness

AAA also uses CC for their $10/mo service.My parents use them (well, just mom now) and it is really pretty basic service for that Hamilton. Mom got a new phone for free because there is no longer any 2G service to be had. I think the phone is using 3G towers. It is really only used for

Re: [MBZ] Any lighting experts?

> > They must raise your power bill noticeably, too. Roughly 15 cents an hour when they're all on. Normally I only use 1/3 of them at a time, and they're not usually on that much. -- Jim ___ http://www.okiebenz.com To search list archives

Re: [MBZ] OT: cell foniness

iPhone 4S is quad-band GSM, and CDMA. "As a result of an upgraded radio chip inside the phone, in addition to being a world phone , both GSM and CDMA

[MBZ] OT: cell foniness

I have been using (and getting ripped off by) verizon since 1999. I think it is time to pull the plug. I've been paying $60/mo Currently my usage is about 300 min and .5 mb data ( i use gas buddy once in a while) Consumer cellular,(CC) in spite of it tie to AA(L)RP seems to be a good deal.

Re: [MBZ] Any lighting experts?

On Tue, 31 Jan 2017 19:41:03 -0800 Jim Cathey wrote: > I like the 8' 96W cold-start HO fluorescents, which start up even in > sub-zero weather. Yes, they flicker some when it's very cold, but they > warm up after a bit and have full output. The new garage has 30 of >

Re: [MBZ] Any lighting experts?

Yes, those are nice. Before the days of LEDs, those were the way to go. I think we paid about 75 -$100 per fixture for them. Not cheap, but for refrigerated rooms or northern garage/shop where it is a cold environment, they are worth the . Now there may be, or will be within 2-3 yrs,

Re: [MBZ] Any lighting experts?

I have tried several sets of tubes and put same tubes in a fixture that is working and they work fine Sent from my iPhone > On Jan 31, 2017, at 9:06 PM, Curley McLain via Mercedes > wrote: > > It is possible that the tubes are bad, even new out of the box. They are

Re: [MBZ] Any lighting experts?

If the line/neutral is flipped, or the grounding is bad/wrong, it's possible that a more sensitive (special snowflake?) ballast might have difficulty starting. Capacitive effects are part of the starting process. Or, bad bulb/ballast as has been suggested, or bad connections in the bulb sockets.

Re: [MBZ] Any lighting experts?

On Tue, 31 Jan 2017 21:06:23 -0600 Curley McLain via Mercedes wrote: > It is possible that the tubes are bad, even new out of the box. They > are pretty simple to troubleshoot. Ballast, tubes, connections. Swap > in known good tubes. Swap in known good ballast. clean

Re: [MBZ] Any lighting experts?

It is possible that the tubes are bad, even new out of the box. They are pretty simple to troubleshoot. Ballast, tubes, connections. Swap in known good tubes. Swap in known good ballast. clean the connectors with a little HF wire brush when the switch is OFF! Kaleb C. Striplin via

Re: [MBZ] Any lighting experts?

I have rotated the bulbs in their sockets which cleared up a couple other fixtures that turned out to not need new bulbs or anything. Ballast are the correct ones and are wired correctly per diagram. I got a couple of things to check next time I am out there. Sent from my iPhone > On Jan 31,

Re: [MBZ] Freebie 300SD for Clay

Are the neighbors willing to pay for a new car for you? No, I didn't think so. So, Screw em! GO get it! clay via Mercedes January 31, 2017 at 8:43 PM You have no idea how much that appeals to me. As it is, the neighbors are not that entertained by my

Re: [MBZ] Freebie 300SD for Clay

You have no idea how much that appeals to me. As it is, the neighbors are not that entertained by my collection of old cars. clay > On Jan 31, 2017, at 2:19 AM, Dan Penoff via Mercedes > wrote: > > Go get it, buddy! > >

Re: [MBZ] Any lighting experts?

then it should not flicker. Bad connections at the tube? new ballast bad or the wrong one? Your climate is not humid, so the connectors should not corrode unless the building traps humidity. Dusty/dirty connectors to the bulb? Kaleb C. Striplin via Mercedes

Re: [MBZ] Any lighting experts?

It was about 70 Sent from my iPhone > On Jan 31, 2017, at 8:14 PM, Curley McLain via Mercedes > wrote: > > What is the temp in the shop when you tried this? The new fluorescent > fixtures made for cold temps do pretty well down to 40 or even 32º. but LEDs > would be

Re: [MBZ] Any lighting experts?

What is the temp in the shop when you tried this? The new fluorescent fixtures made for cold temps do pretty well down to 40 or even 32º. but LEDs would be better, as the cold does not bother them. OK Don via Mercedes January 31, 2017 at 6:37 PM Fluorescents

Re: [MBZ] Any lighting experts?

Kaleb wrote: > I will look into LED... Maybe the utility has a program to encourage LED? The warehouse here got switched to LED that uses the old fixtures - just install new tubes and ballast or somesuch and it seemed that there was a utility program that funded part of the cost? tin-man

Re: [MBZ] OT brickwork

Curley wrote: > Yes, Virginia, you should have weep holes! Why not have the bank be responsible? tin-man ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] 9 year old AMG for sick money on BAT

Most or at least many folks never haul much because they do not do anything for themselves Sent from my Galaxy Tab® A Original message From: Curley McLain via Mercedes Date: 2017-01-31 6:21 PM (GMT-06:00) To: Mercedes Discussion List

[MBZ] Good Deal on an Mustang - I mean SL...

Really. Not a bad car for the money, and they’ve dealt with the hydraulics, which would be my biggest concern. http://tampa.craigslist.org/hil/cto/5966090177.html -D ___ http://www.okiebenz.com To

Re: [MBZ] Any lighting experts?

Actually I paid about $25 for new ballast and I see I could get new 4 bulb t8 fixtures for $39 at lowes. I should have just gone that route. I will look into LED but do they have 8ft fixtures? Seems they would be too expensive at this point. On 1/31/2017 6:37 PM, OK Don via Mercedes wrote:

Re: [MBZ] OT brickwork

Yes, Virginia, you should have weep holes! The way is is "spozedta be done" is that the foundation should have a brick ledge. This is a cutaway where 4" along the top of the foundation or masonry wall or slab is blocked out for 8-12" so that the bricks start 8-12" BELOW the highest masonry

Re: [MBZ] Any lighting experts?

Fluorescents suck in the cold . . . will be dim and even flicker sometimes until they warm up. LEDs are the way to go. On Tue, Jan 31, 2017 at 6:23 PM, Kaleb C. Striplin via Mercedes < mercedes@okiebenz.com> wrote: > I have been fighting the 8ft t12 fixtures in the shop. I had a couple of >

Re: [MBZ] Any lighting experts?

Costco sell 4ft LED shoplights for $25 or less sometimes. Buy them and don't fool with the fluorescents. -FT On 1/31/17 7:23 PM, Kaleb C. Striplin via Mercedes wrote: I have been fighting the 8ft t12 fixtures in the shop. I had a couple of lights out and replaced bulbs and a ballast in one

Re: [MBZ] OT brickwork

Yes, that's it. Keeps water that might get in from running out thru the inside of the house and gives it a path to run to the outside of the house. Mine does not have them. Sent from my iPhone > On Jan 31, 2017, at 5:23 PM, Dan Penoff via Mercedes > wrote: > > Very

[MBZ] Any lighting experts?

I have been fighting the 8ft t12 fixtures in the shop. I had a couple of lights out and replaced bulbs and a ballast in one of them and it was fine. Lately I have had about 3-4 fixtures out again so I bought a case of bulbs. These are 8ft with 2 bulbs per fixture. So I swapped bulbs with new

Re: [MBZ] 9 year old AMG for sick money on BAT

No! If mama wants a minivan, buy a Metris or a sprinter if she makes that kind a money! Forget that riceburner crap. My first van was a frod 66 "falcon" It was great, except in freezing rain. 240 truck engine. I ran continental 6 ply radials on it to take the loads I hauled. 66 and 67

Re: [MBZ] OT brickwork

Very common: https://masonrysolutions.wordpress.com/2011/03/29/what-are-weep-holes-and-do-i-need-them/ Often have little pieces of felt or screen in them to prevent bugs from getting in. I’ve owned

Re: [MBZ] OT brickwork

Never heard of "weep holes" in brick fascia or veneer. You do NOT have structural brick (a multi-course wall with an internal void, like building built 100 years ago) or the top of the brick wall exposed to water. The joints should, however, all the struck either concave or flat with a slight

[MBZ] This Looks Worth Following

http://www.benzworld.org/forums/w123-e-ce-d-cd-td/2768433-om61x-gear-reduction-starter.html#post15534641 I’m wondering how this turns out. I tried to find detailed specifications or

Re: [MBZ] OT brickwork

May I presume your house has a brick fascia, applied over a standard stud wall, which is then covered with OSB [or plywood] ? The wall, if so constructed, should consist of Studs, Plywood, something like Tyvex water and wind barrier "cloth" [plastic really that breathes to allow moisture to

Re: [MBZ] OT brickwork

Kaleb asks: >‎In look at my house, I do not see any such >weep holes. So, is my brickwork >not done >properly? Anybody have experience with >such matters? I have a friend who is a brickie. I will ask‎ him.  Rick  ___ http://www.okiebenz.com To search list

Re: [MBZ] OT: New gun

On 30/01/2017 5:52 PM, Kaleb C. Striplin via Mercedes wrote: And now we are heading down the political road. I have a gun within reach loaded and ready to go all over the house. Kid knows not to touch it or he will die. A locked up gun does no good. Proper training is the key. better hope

[MBZ] OT brickwork

After talking about fixing floors and water intrusion, I did some research about water intrusion issues and brick, and I saw talk about how brick work should have weep holes, which are gaps in the mortar between bricks about every 4-5 bricks to allow water to drain out and allow air flow to

Re: [MBZ] 9 year old AMG for sick money on BAT

On 31/01/2017 11:07 AM, Andrew Strasfogel via Mercedes wrote: I really don't get it. This looks like a squashed minivan. http://bringatrailer.com/listing/2007-mercedes-benz-r63-4/ ___ It is what you want if your wife insists you drive a mini-van. My son

Re: [MBZ] Part Number Question

Reminds me of a famous Seinfeld episode: "No parts for you!" On Tue, Jan 31, 2017 at 4:00 PM, Meade Dillon via Mercedes < mercedes@okiebenz.com> wrote: > Maybe Dan could provide you with a letter of introduction to his parts guy, > and vouch for you as A True Benz Aficionado, deserving of Dan's

Re: [MBZ] Part Number Question

Maybe Dan could provide you with a letter of introduction to his parts guy, and vouch for you as A True Benz Aficionado, deserving of Dan's special pricing. All your purchase requests to The Parts Guy would need to be vetted and approved by Dan to make sure you don't become an embarrassment.

Re: [MBZ] Part Number Question

Do you have any pointers as to how to befriend the parts sales staff, to get decent prices? Rick ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] Part Number Question

I don't mind buying my own if that won't arouse suspicion... On Tue, Jan 31, 2017 at 3:23 PM, Dan--- via Mercedes wrote: > That's why I bought two. Maybe I should buy some more > > -D > > Sent from my iPad > > > On Jan 31, 2017, at 3:13 PM, Andrew Strasfogel via

Re: [MBZ] Part Number Question

That's why I bought two. Maybe I should buy some more -D Sent from my iPad > On Jan 31, 2017, at 3:13 PM, Andrew Strasfogel via Mercedes > wrote: > > Curt is the Wise Man of our Forum. > > On Tue, Jan 31, 2017 at 3:08 PM, Curt Raymond via Mercedes < >

Re: [MBZ] Part Number Question

Curt is the Wise Man of our Forum. On Tue, Jan 31, 2017 at 3:08 PM, Curt Raymond via Mercedes < mercedes@okiebenz.com> wrote: > Solution: > Dan, buy a couple more, sell them to Andrew for a small profit. Everybody > wins. > -Curt > > From: Dan--- via Mercedes > To:

Re: [MBZ] Part Number Question

Solution: Dan, buy a couple more, sell them to Andrew for a small profit. Everybody wins. -Curt From: Dan--- via Mercedes To: Mercedes Discussion List Cc: "d...@penoff.com" Sent: Tuesday, January 31, 2017 3:00 PM Subject:

Re: [MBZ] Part Number Question

Copied from my texts to my dealer parts guy - I just bought two of them: "A question, if I may: A 0008350644 magnet, otherwise known as a monovalve kit or plunger, used to be around $260.00 list. A couple of months ago, the price dropped to around $50 - I remember asking you to check it for

Re: [MBZ] Part Number Question

Cheapest I've found doing a quick search.  ‎http://www.mercedespartssuperstore.com/SearchResults.asp?Search=000-835-06-44+= It's listed as a lifting magnet.  Rick ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

Re: [MBZ] Part Number Question

I may need to call your dealer. Euromotorcars lists that part for about $350, and the Classic Center emailed me: "000-835-06-44 insert $215.90 net, and it’s a factory part as always. 1 day away." On Tue, Jan 31, 2017 at 1:51 PM, Dan--- via Mercedes wrote: > The number I

Re: [MBZ] Part Number Question

The number I used is what it's called out by with Mercedes, and is current in the EPC. Should be $50 at your dealer or they're sandbagging you. -D Sent from my iPad > On Jan 31, 2017, at 12:00 PM, Andrew Strasfogel via Mercedes > wrote: > > Autohaus lists that part

[MBZ] 9 year old AMG for sick money on BAT

I really don't get it. This looks like a squashed minivan. http://bringatrailer.com/listing/2007-mercedes-benz-r63-4/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] Part Number Question

Autohaus lists that part number - both work in searches. This is the solenoid (monovalve insert) to control heating that we have been discussing endlessly. On Tue, Jan 31, 2017 at 5:27 AM, Dan Penoff via Mercedes < mercedes@okiebenz.com> wrote: > Where did you get that number? The standard

Re: [MBZ] OT: New gun

> On January 30, 2017 at 7:28 PM Dan Penoff via Mercedes > wrote: > I think the NRA is OK as an advocacy organization even separated from the > political aspect of it. The NRA was founded in 1871 by military officers, and the chartered purpose was to "promote and

Re: [MBZ] OT: New gun

He took the entirely wrong track with it "Well Scarborough Club will let me do it." It turns out that yes Scarborough does have a range for that but its only in use like 4 times a year because it requires a range safety officer that the shooters pay for. They also don't run with a loaded gun,

Re: [MBZ] OT: New gun

Come join the muzzleloading world. Patched round balls, even if you have to buy the balls are quite economical to shoot. If you can find flint in the wild you can cut costs even further. -Curt From: Larry Turner via Mercedes To: Curt Raymond via Mercedes

Re: [MBZ] 3m yellow

If in doubt, 3M has an excellent Tech Support Dept.. on their website LarryT On 01/29/2017 6:27 PM, Dan Penoff via Mercedes wrote: Then you need the foam double sided tape. Advance Auto carries it in the stores, and the roll will last forever.

Re: [MBZ] Part Number Question

Where did you get that number? The standard W123/W126 monovalve insert is a part number 000 835 06 44. And what’s the application? -D > On Jan 30, 2017, at 10:03 PM, Andrew Strasfogel wrote: > > Searched for monovalve using part number 1147213007 to no avail. > > On

[MBZ] Freebie 300SD for Clay

Go get it, buddy! http://www.peachparts.com/shopforum/mercedes-cars-sale/383761-fs-1982-300sd-tacoma-wa-free.html -D ___ http://www.okiebenz.com To search list