[MBZ] 2 things -- 300SD

2009-06-14 Thread Rich Thomas
I have refilled the tranny 2 times now, tranny fluid is leaking somewhere. Is there a tranny cooler? It looks like some lines come forward from the tranny that are covered with fluid. I have not had the car up on ramps yet (I know, I know), just wondered if anyone might have some thoughts

Re: [MBZ] 2 things -- 300SD

2009-06-14 Thread Christopher McCann
...@constructivity.net Subject: [MBZ] 2 things -- 300SD To: Mercedes Discussion List mercedes@okiebenz.com Date: Sunday, June 14, 2009, 12:52 PM I have refilled the tranny 2 times now, tranny fluid is leaking somewhere.  Is there a tranny cooler?  It looks like some lines come forward from the tranny

Re: [MBZ] 2 things -- 300SD

2009-06-14 Thread Rich Thomas
richthomas79td...@constructivity.net Subject: [MBZ] 2 things -- 300SD To: Mercedes Discussion List mercedes@okiebenz.com Date: Sunday, June 14, 2009, 12:52 PM I have refilled the tranny 2 times now, tranny fluid is leaking somewhere. Is there a tranny cooler? It looks like some lines come forward from

Re: [MBZ] 2 things -- 300SD

2009-06-14 Thread OK Don
Cut it and clamp rubber hose ovewr the gap? I've done that with fuel lines, but never a tranny line. On Sun, Jun 14, 2009 at 3:50 PM, Rich Thomas richthomas79td...@constructivity.net wrote: Well you are spot on about the tranny cooler line -- the one under the A/C compressor next to the oil

Re: [MBZ] 2 things -- 300SD

2009-06-14 Thread Rich Thomas
Good idea -- I'll see if the epoxy holds it, didn't seem like it was going to stick. I have some fuel hose, that would probably be the easiest was to bodge it for awhile. The thunderstorm went by and sun is back out but looks like another is on its way, I'll have to wait awhile. --R OK

Re: [MBZ] 2 things -- 300SD

2009-06-14 Thread MG
just took the elbow off and cleaned that out and left it at that. Manfred Date: Sun, 14 Jun 2009 13:52:29 -0400 From: Rich Thomas richthomas79td...@constructivity.net Subject: [MBZ] 2 things -- 300SD To: Mercedes Discussion List mercedes@okiebenz.com Message-ID: 4a3538dd.2000

Re: [MBZ] 2 things -- 300SD

2009-06-14 Thread Rich Thomas
Thanks for that info. Same problem as you describe. On the tranny line I took a piece of fuel line, maybe 1/4 or so, cut a piece about 1.5 long, slit it lengthwise, put some RTV where the hole in the hard line is, slid the fuel line over it and put a little hose clamp on it tight over the

Re: [MBZ] 2 things -- 300SD

2009-06-14 Thread Christopher McCann
, you are getting a little more blowby and it is getting to the turbo. Chris 1985 300SD 244K miles --- On Sun, 6/14/09, Rich Thomas richthomas79td...@constructivity.net wrote: From: Rich Thomas richthomas79td...@constructivity.net Subject: Re: [MBZ] 2 things -- 300SD To: Mercedes Discussion