archer wrote:
My '83 300D has a vacuum leak when the weather is cold, which stops when
the
weather is warm. The locks will operate when leaving the house, but
after
driving 12 miles to town in the cold air, the locks will not work. I'm
not
sure which part to replace first in order to try
would probably be a lot cheaper, although got alot going on and a big
backlog on shipping.
Jim Cathey wrote:
Call Rusty - he can get LOTS of stuff that isn't on the website.
Or get a used one from Kleb.
-- Jim
___
http://www.okiebenz.com
For new parts
That makes since, I have seen alot of 240D's with worn out engines, I
guess because you have to rev the crap out them while going down the
highway.
Zoltan Finks wrote:
I read that article on million-mile cars and one of the interviewees
mentioned that he likes to keep his speed down on the
509.26
Sunil Hari wrote:
Selling my 1992 300D 2.5T - it's a fantastic car, but it's too nice for me.
My plan is to downgrade to a 240D (the student model for a career
student).
Basics: 290Kmi, smoke silver (702) exterior, beige MB-Tex interior.
Details: Everything works but the rear
We have a biodiesel list, your questions would probably be better
answered there.
Tom Harruff wrote:
At today's MBCA Section Breakfast meeting I had a lady owner of an 85 300D
asking questions about running her car on WVO or SVO.
I know some of you have been through the journey and could
I didnt know your 240D was manny tranny, we should talk about that.
OK Don wrote:
What's the condition, or miles when replaced, of the belt tensioner
and the vacuum pump?
I think you're crazy for downgrading from this car to a 240D, but who
am I to judge?
Interested in trading for my '81 240D
My 1985 300TD has a noise coming from the rear, which I had my indy 'fix' last
year. It has the following traits: It is clearly in time with speed, and
sounds like hammering. It is most pronounced on hard acceleration, goes almost
away while coasting, and if I decelerate, it also is loud,
I'll beat that with $510 even and lunch when you drive it here..LOL
Mike
- Original Message -
From: Kaleb C. Striplin [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, February 01, 2007 7:55 PM
Subject: Re: [MBZ] selling my 300D
509.26
Sunil
so what did it say, its taken down now
Craig McCluskey wrote:
On Mon, 29 Jan 2007 20:19:10 -0700 Bob Rentfro [EMAIL PROTECTED] wrote:
This is kind of odd.can this dude do this?
http://phoenix.craigslist.org/car/270469359.html
Well, he did it.
The real point is, Can he get away with
no and no
Peter Merle wrote:
Are the 4 speed gearboxes of the W123 and W124 series the same ? Furthur
can One use a W124 230E gearbox in a W123 300D?
Peter
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For
Chris Kueny wrote:
My 1985 300TD has a noise coming from the rear, which I had my indy 'fix' last
year. It has the following traits: It is clearly in time with speed, and
sounds like hammering. It is most pronounced on hard acceleration, goes almost
away while coasting, and if I
Report Run Date: 02/01/2007
Vehicle Description: WDBJF55F7VA403678
TitleCheck: No Record Reported to AutoCheck
Problem Check: No Record Reported to AutoCheck
Odometer Check: Record(s) Reported to AutoCheck
Vehicle Information: Record(s) Reported to AutoCheck
Full History: Record(s)
Chris - not sure how much different that car is from my '90 124 2.5, but I
had a loud noise, intermittently, that became more frequent over several
months. All due to a worn CV joint. The noise seems to be slow but
proportional to wheel rotation; it would be about 3 times faster if it was
any other yoohoo people getting this?
Marshall Booth wrote:
[EMAIL PROTECTED] wrote:
An embedded and charset-unspecified text was scrubbed...
Name: not available
Url: http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20070201/97ae57b9/attachment.pl
well yea, of course its worth more in parts. Think is, parting out a
perfectly good otherwise car reduces the number of cars in circulation.
Pretty soon there wont be too many and they will get expensive. But,
thats just me.
Sunil Hari wrote:
because i have no desire to drive another
There is a lot more work than you might think in parting out a car
properly. Then there is the storage of the parts, identifying what all
cars a certain part will fit, collecting payment, packing and shipping
the part etc.
Sunil Hari wrote:
right, but i just don't have the time to mess with
Chris Kueny wrote:
My 1985 300TD has a noise coming from the rear, which I had my indy 'fix' last
year. It has the following traits: It is clearly in time with speed, and
sounds like hammering. It is most pronounced on hard acceleration, goes almost
away while coasting, and if I
OK, I will do 526 but that does not include lunch, only a soda when you
arrive.
Mike Canfield wrote:
I'll beat that with $510 even and lunch when you drive it here..LOL
Mike
- Original Message -
From: Kaleb C. Striplin [EMAIL PROTECTED]
To: Mercedes Discussion List
Zoltan Finks wrote:
I read that article on million-mile cars and one of the interviewees
mentioned that he likes to keep his speed down on the freeway. He had read
something about freight train research that revealed something like 80% of
engine wear ocurred in the top 20% of the engine's RPM
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
Marshall Booth wrote:
Zoltan Finks wrote:
I read that article on million-mile cars and one of the interviewees
mentioned that he likes to keep his speed down on the freeway. He had read
something about freight train research
Agreed Kaleb!! People think parting out a car is so freakin
easy...Just pull a few parts and throw them on E-bay.If
you've never done it get ready for a surprize when parting a car turns into
a 40 hour a week job for a month. Just providing shipping quotes to non
buyers can
Kaleb C. Striplin wrote:
Why is that? What all is different between the early and later ones?
Marshall Booth wrote:
A 2.5 engine can't be tucked into an '84-'85 2.2 chassis without a lot
of welding and sheet metal work.
The OM602 2.5 diesel and the M103 2.6 gasoline engines are longer
Aw come on, youse guys - give the guy a break! Its worth at least 625! (and
I'll throw in a Philly Cheese Steak if he delivers!)
Werner
- Original Message -
From: Kaleb C. Striplin [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, February 01, 2007
Then there is the little details, such as, where to get a constant
supply of boxes. Sometimes its hard rounding up that perfect box to
ship that item.
Mike Canfield wrote:
Agreed Kaleb!! People think parting out a car is so freakin
easy...Just pull a few parts and throw them on
Marshall,
I mentioned this fact, in detail, in an earlier email.
An engine only wears substantially faster at heavy load if the load is over
stressing the engine.
Thanks,
Tom Hargrave
www.kegkits.com
256-656-1924
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On
I'll tell ya whatI'll do $550 and you talk Kaleb into buying us both
lunch for saving him the trouble...
Mike
- Original Message -
From: Kaleb C. Striplin [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, February 01, 2007 8:51 PM
Subject:
That's about the funniest subject line I've seen in a long time. Thanks for
the laugh.
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Chris Kueny
Sent: Thursday, February 01, 2007 7:07 PM
To: Mercedes Discussion List
Subject: [MBZ] Noise from the
That looks a LOT like the Dodge WWII field ambulance we had in our
Civil Air Patrol Squadron when I was in HS. Not fast, would would go
anywhere.
On 2/1/07, Mike Canfield [EMAIL PROTECTED] wrote:
Here are a couple pics of my daily driven 68 Dodge M37 with it's whopping
78HP flathead 6. ;)
Aren't you still in Med school? It will take much more time to part it
out than to fix it.
On 2/1/07, Sunil Hari [EMAIL PROTECTED] wrote:
right, but i just don't have the time to mess with diagnosis and replacement
of a transmission in a $500 car that I don't need. But given the low
interest
On 2/1/07, Sunil Hari [EMAIL PROTECTED] wrote:
right, but i just don't have the time to mess with diagnosis and replacement
of a transmission in a $500 car that I don't need. But given the low
interest in parts from this car (e.g. seats, wood trim, engine, turbo, etc)
I'm probably goign to
On Thu, 01 Feb 2007 19:28:16 -0600 Kaleb C. Striplin
[EMAIL PROTECTED] wrote:
so what did it say, its taken down now
Something along the lines of, So-and-so's business did me wrong -- don't
patronize them, they're creeps.
Craig
I wonder how one would define overstressing. Its interesting that in
the OM617 engine power and fuel consumption curve ( document designed
for the installation of stationary Om617's ) it states words to the
effect that one should not exceed 3600 and go below 1500 rpm for
continiously.
Peter
Can one look up part prices and availability and superceeded parts with
the EPC NET online? Has only subscribed to the service?
EPC Net for those who don't know is a Java application that runs on your
PC when connected to DC's parts computer which assists you in looking up
Mercedes part numbers.
Here's a tip on that line.Use 5 gallon buckets with lids from Wally
World for 4 bucks..Many greasy nasty things fit well in them and the
customer gets a free bolt bucket.Beats trying to get a steering gear
or a diff. to stay in cardboard.
Mike
- Original Message -
eh, to hell with it - too much work. I'm putting in 60-80 hours a week at
the hospital, and I don't have time for another car.
On 2/2/07, Mike Canfield [EMAIL PROTECTED] wrote:
Here's a tip on that line.Use 5 gallon buckets with lids from Wally
World for 4 bucks..Many greasy nasty
Don,
That would be the M43...The same basic truck with a bit more wheelbase
and an enclosed body...Like you saidSlow as snails. Don't sink one
in a mudhole.It will be better left there for a bridge piling as a D9
will have a rough time dragging it out...LOL
Mike
-
The two limits are probably for optimum fuel consumption. The cam in a
stationary engine has a favorable RPM range.
Thanks,
Tom Hargrave
www.kegkits.com
256-656-1924
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Peter Merle
Sent: Friday, February 02,
Next time I'm out your way I'll stop by for a ride...
-Curt
Date: Thu, 1 Feb 2007 16:07:37 -0500
From: Mike Canfield [EMAIL PROTECTED]
Subject: Re: [MBZ] What is a Truck? OT Here is a real truck.
To: Mercedes Discussion List mercedes@okiebenz.com
Message-ID: [EMAIL PROTECTED]
Content-Type:
Driving home last night I stopped at Home Depot and noticed the rear passenger
side of the car behind the rear wheel was wet with fuel.
I thought that was odd but though it made the hard starting I've had recently
make sense. The car doesn't actually start hard but it needs some throttle
input
I don't seem to be... Yahoo made a change about 3 months ago that screws up
line breaks when I type (as in there aren't any) but thats pretty minor.
-Curt
Date: Thu, 01 Feb 2007 19:42:57 -0600
From: Kaleb C. Striplin [EMAIL PROTECTED]
Subject: Re: [MBZ] 1987 Mercedes- Benz - $2000 (Wellesley
It was some guy saying how crooked and awful World Motors here in PHX was.
It was kind of funnya typical poorly worded rant from someone who
thought they got rooked.
It looks like either World Motors or CL got it removed.
Bob R
- Original Message -
From: Kaleb C. Striplin [EMAIL
He didn't recover...his career is zehr uber.
Bob R
- Original Message -
From: andrew strasfogel [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, February 01, 2007 2:58 PM
Subject: Re: [MBZ] Speaking of safety...
When he recovers, the owner will
Check your propeller shaft intermediate bearing, rubber around bearing wears
and can make funny noise when coasting. Just changed mine out/Tom
- Original Message -
From: Chris Kueny [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, February 01, 2007
I am told by everyone that driving with your lights on (or some other
accessory) helps to recharge the battery faster after starting by putting a
load on...the alternator? the battery? something. I don't get electricity.
BUT, I THINK, I recall Marshall (sorry if I am mis-recalling)
I am DEFINITELY not misinterpreting what this guy (who, otherwise knows quite
a bit about cars, raced cars, built race cars, does all his repairs, etc).
We've had this argument SEVERAL times.
If you turn the headlights on with the engine running, all you're going
to do is make the
a fuel leak would fit the bill, air gets into the line while the
engine is shut off right?
The leak is DEFINATELY from the area of the fuel cap...
Just 'cause you have a cap leak does _not_ mean you don't also
have another leak somewhere else!
-- Jim
http://www.svmgcc.org/tech_tips/oil_is_killing.htm
Thanks!
Chris
Christopher McCann, Squier Park, Kansas City, Missouri
-2006 GSD, Anke (Yanke von der burg Austerlitz)
-2006 GSD, Heinrich (Zane von der burg Austerlitz)
-1985 300SD, 219K miles, Wulf
-1982 300Dt, 117K miles,
Chris - that sounds like a stretch from abstract theory to the real world.
An alternator can only put out a limited number of Amperes, and if the
lights are on, they will consume some of that current. I suspect that if
the battery was fully charged so that the terminal Voltage was high,
with a 6 block commute - and no other driving - I will wear a battery down -
faster or slower - depending on temp. But fluctuating temp really throws a big
variable into that test.
CM
Levi Smith [EMAIL PROTECTED] wrote: Well, I guess the real answer is this.
How many times do you not
http://www.svmgcc.org/tech_tips/oil_is_killing.htm
I can believe it! The 'mass market' is not much interested in
cars even five years old.
I use Delo in everything, and have for years.
-- Jim
I was at the bank last week and I saw an elderly gentleman get out of a
VERY nice 123 300D. I was right behind him in line and we had a few
minutes to talk because the line was moving VERY slow. I asked him
about his car and he seemed very pleased that someone asked about it.
We continued our
GO FOR IT! You'll never see another like it.
On 2/2/07, Donald Snook [EMAIL PROTECTED] wrote:
I was at the bank last week and I saw an elderly gentleman get out of a
VERY nice 123 300D. I was right behind him in line and we had a few
minutes to talk because the line was moving VERY slow. I
Reminds me of the Garrison Keiller (spelling?) routine or comment or whatever
you want to call it about people
being so proud that they had never gone anywhere. I'm not sure but I think it
was in one of the Lake Wobygon
(spelling again?) books where he talks about some fellow who was so proud of
In the local paper today is a one-owner 1984 300D with 23,000 miles,Charcoal
grey color with the grey/black interior for $1,200.00
Just called the guy and bought it over the phone, picking it up tonight.
Apparently he is moving to Florida and taking his minivan. Guy kept calling
me Don and
That's better than watching the obituaries.
Dwight Giles
Donald Snook [EMAIL PROTECTED] wrote:
I was at the bank last week and I saw an elderly gentleman get out of a
VERY nice 123 300D. I was right behind him in line and we had a few
minutes to talk because the line was moving VERY
Hey Dave,
Was that your new car I saw down at the credit union.
That thing is absolutely beautiful. I am jealous.
Please drop over sometime and take me for a ride.
Thanks
Richard
--- Dave Wakin [EMAIL PROTECTED] wrote:
In the local paper today is a one-owner 1984 300D with 23,000
Looks like Moose Day is underway.
Dwight Giles
Dave Wakin [EMAIL PROTECTED] wrote:
In the local paper today is a one-owner 1984 300D with 23,000 miles,Charcoal
grey color with the grey/black interior for $1,200.00
Just called the guy and bought it over the phone, picking it up tonight.
Yea. Maybe I should just hang out at the bank looking for old guys in
nice benzes.
Donald H. Snook
McDonald, Tinker, Skaer, Quinn Herrington, P.A.
300 West Douglas
P.O. Box 207
Wichita, Kansas 67201 0207
Tel. (316) 263-5851
This confidential message may be subject to the attorney-client
Dave Wakin wrote:
In the local paper today is a one-owner 1984 300D with 23,000
miles,Charcoal
grey color with the grey/black interior for $1,200.00
Just called the guy and bought it over the phone, picking it up tonight.
Apparently he is moving to Florida and taking his minivan. Guy
Yea. Maybe I should just hang out at the bank looking for old guys in
nice benzes.
I go to the bank. In the Frankenheap. Prolly not quite old
enough, either!
-- Jim
yes because it (300SD) is plugged in and it gets up to temp pretty quick. The
300D, not really, but close.
I hate driving these cars for such short distances - wear tear, but not
much I can do about that. Kansas City has more miles of highway per capita
than any other US city, I'm told
Looks like Moose Day is underway.
Dwight Giles
The Groundhog will be jealous of the Moose trying to steal its day.
BillR
I decided to splurge and replace all my glow plugs for my 1983 W123 300TD
wagon. The car starts poorly and stalls for the first 2-3 minutes; also, I
haven't replaced them in 150 k miles.
1) Does it matter what brand I purchase? Cost seems to range between @ $8 -
$12.
2) What tools will I
I would recommend Bosch versus Beru. I see that Autohaus AZ has them for
$8.69 which is $1.21 below my cost. I think I'll call them and see how many
they will sell me!
- Original Message -
From: andrew strasfogel [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent:
Can the shaft be removed as one piece? Is this considered a three piece
drive shaft?
Thanks
Harry
Jim C wrote:I go to the bank
Howdy!
Actually, that kind of 'meet n greet probably works just about
anywhere. I had stopped at a fast food place just off I95 back in 87 and
was in some car or other - probably a Malibu - and as I like to do I checked
the oil. A guy in a W126 parked near by
I always do that with my freight trains! Doesn't seem applicable to my
cars. Almost all automobile engine wear is cold start wear..
I have a Porsche 911 factory shop manual from 1968 that states that startup
wear is equivalent to 200 miles at full throttle. Keeping in mind that all
their
andrew strasfogel [EMAIL PROTECTED] writes:
I decided to splurge and replace all my glow plugs for my 1983 W123
300TD wagon.
I just did mine a few weeks ago.
1) Does it matter what brand I purchase? Cost seems to range
between @ $8 - $12.
Bosch or Beru are recommended. I've heard not
And Mobile 1 won't help a bit if the issue is gasoline wash down. The issue
is not lack of oil pressure at start up. The issue is oil that's coating the
cylinder walls being diluted with fuel condensate because the cylinder walls
are cold at start up. No-one's oil (synthetic or otherwise) protects
only real pitfall I remember was accessing the plugs - I got a 12mm
ratcheting wrench and all issues there went away. Couldn't manage to get a
deep socket on the rearmost GP in my 84 300D.
When you remove the small nut attaching the wire to the plug, it helps to
have something under it to catch
An embedded and charset-unspecified text was scrubbed...
Name: not available
Url:
http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20070202/a82a5bfd/attachment.pl
Christopher McCann wrote:
and this could vary from one voltage regulator to another, depending on how
it is designed to work, correct?
Yes. In old cars they were all pretty much the same, but in some modern
cars the engine computer actually controls the alternator field
windings, and will
[EMAIL PROTECTED] wrote:
That's better than watching the obituaries.
For getting big old heaps, gently driven, with low mileage, it's hard to
beat making friends with someone who works at a nursing home.
Allan Streib wrote:
Wrenches. If you have deep sockets and flex adapters that will help,
stubby combination wrenches are also useful. Getting at the plugs can
be a little tight unless you have really small hands.
I haven't done a Mercedes, but on VW diesels I find those ratcheting
I hate you
Bob R
- Original Message -
From: Donald Snook [EMAIL PROTECTED]
To: Mercedes@okiebenz.com
Sent: Friday, February 02, 2007 9:17 AM
Subject: [MBZ] WOW!
I was at the bank last week and I saw an elderly gentleman get out of a
VERY nice 123 300D. I was right behind
My dad called me a little while ago and told me he wanted me to have his
car, a 300D with very few miles. Mom's meenievayan is a bit easier for
him to negotiate. Said something about an ambulance chaser trying to
hustle him for it, figured it time to just give it to me. Since he is
getting
jeeze, with a 6 block commute, why are you even *driving* at all?
wouldn't a bicycle work better? ;-)
seriously; do you have too much stuff you need to take with you that
you need to drive? (surely, it can't be the weather; i've comfortably
walked farther than that in Alberta when it was
Curt Raymond wrote:
Driving home last night I stopped at Home Depot and noticed the rear passenger
side of the car behind the rear wheel was wet with fuel.
I thought that was odd but though it made the hard starting I've had recently
make sense. The car doesn't actually start hard but it needs
Christopher McCann wrote:
I am told by everyone that driving with your lights on (or some other
accessory) helps to recharge the battery faster after starting by putting a
load on...the alternator? the battery? something. I don't get electricity.
BUT, I THINK, I recall Marshall (sorry
You could really act superior and call them Alsatians.
Brian
Christopher wrote:
GSD = German Shepherd Dog. My two dogs. The German Shepherd is one of the
few dogs that have the word dog in their official name, so they are
GSDs for short.
Chris
Driving with the headlights on reduces the charge to your battery
increases your charge time because the headlights pull away current that
could be dumping into the battery.
Thanks,
Tom Hargrave
www.kegkits.com
256-656-1924
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
Christopher McCann wrote:
http://www.svmgcc.org/tech_tips/oil_is_killing.htm
Nothing new here. The nits have been arguing about this for years. The
people that seriously lubricate car and truck engines settled this and
make fine oils. Mercedes warned against choosing oil based on API
Well it looks as though it may be no big deal. I reseated the cap this morning
and tonight when I got home I got the woof inrush of air that I didn't get
this morning opening the cap.
To be safe I'll buy another seal for the cap from Rusty on Monday. I might as
well get the replacement vacuum
1) errands. I have 5 kids. I often get a request for please pick x, y, z up
on the way home. It seems that I am always having to go somewhere.
I live and work in a sort of bad neighborhood. In the summer, it's too hot.
Cold I don't mind, but it's dark. I carry pepper spray/cs gas mix and
Thanks for the reminder, thats the other thing I'll order Monday...
I did them on my '81 300TD and it was pretty easy. A 1/4 socket set with a
u-joint socket is the way to go. If you have magnetic sockets all the better as
you won't drop the nut on the end. It'd be a good idea to have a magnet
long, maybe, but interesting,... and i *did* ask because i figured there
must be a reason and i was genuinely curious, so it serves me right!
;-)(sorry if anyone else was bored...)
i hope situations improve so you can get back to a more pleasant
arrangement; whether that means the
Tom Hargrave wrote:
And Mobile 1 won't help a bit if the issue is gasoline wash down. The issue
is not lack of oil pressure at start up. The issue is oil that's coating the
cylinder walls being diluted with fuel condensate because the cylinder walls
are cold at start up. No-one's oil (synthetic
87 matches
Mail list logo