Lupines eat lapines, and run amok in Kent
Those must be some ferocious flowers, sounds like
the Day of the Triffids to me!
-- Jim
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL
Seems I killed it. The trans in Gump is truly boogered.
Ah, BUMMER! Send it down to Portland, and I'll install the tranny from that
junker '72 220D I was looking at. Betcha he'd give both of those cars away
now if he still has them. Seriously, it would probably cost too much to
ship that
Pick-up day! I assembled my tool kit and a tow strap, and I made
arrangements to fetch my neighbor along for a lunchtime run to Post
Falls. I'm also bringing my electrical troubleshooting manual, I may
try to get the fuel pump running. I won't do this in front of the
seller, though, that's just
and a window switch won't work?
Not without a latching relay. He wants a power switch
for the charging circuit for the scooter, it needs to
have a mechanically latched ON position if it's to be
just a simple switch.
-- Jim
___
http://www.okiebenz.com
For
Ahhh... Went back and read the need trans fast thread
You can have this one for $800! No returns. ;)
--- Zach [EMAIL PROTECTED] wrote:
I have the gearbox out of that blue 220D that you scavenged parts off
of a long time ago. I dont know if it is actually good or not but it
might
Just for the record, let me say that you're clearly not right in the
head...but, that's probably a good thing, eh? Keep on, keepin on...sucker.
Casey
__
'87 300TD intercooler/propane/biodiesel
'94 100CSQ Avant
'90 90Q
'89 Bluestar
Thanks Zach. Manual 4 speed for a 1972 220D w115 would fit the bill
perfectly. I am going to see if Benz Friendz has run out. I sure
hope not, but would be overjoyed to have one if you can spare one.
On 31 Jul 2007, at 22:51, Zach wrote:
I might have a gearbox for you. What exactly do
I was startin' to get a little excited about that '73 220D until I read the
part about the heater blower. I guess that's a small price to pay for a
reasonably nice example if that's ALL it needed.
Kevin in Portland, OR
1983 300SD 267kmi, Ursula
PS. Neither ad mentioned wihch type of tranny.
You Rock Jim!
On 31 Jul 2007, at 23:14, Jim Cathey wrote:
Pick-up day! I assembled my tool kit and a tow strap, and I made
arrangements to fetch my neighbor along for a lunchtime run to Post
Falls. I'm also bringing my electrical troubleshooting manual, I may
try to get the fuel pump
That would be great. There has been a bunch of chatter on the list
about using Greyhound for shipping. Anything to get Gump out of the
shop and me out of the dog house with SWMBA. I really stuck my foot
in it. All for trying to change out $1.50 in worn rubber bushings.
clay
On 31 Jul
I have the gearbox out of that blue 220D that you scavenged parts off
of a long time ago. I dont know if it is actually good or not but it
might be worth a try? I think they are pretty simple, maybe a do a
rebuild?
--- Redghost [EMAIL PROTECTED] wrote:
Thanks Zach. Manual 4 speed for a 1972
AAAHH!!! And I just had to tell the lady with the 76 Manny
tranny 240D to sell it to someone else as I needed to spend money to fix
my stinkin truck instead!!
Mike
On Tue, 31 Jul 2007 19:23:13 -0700 Redghost [EMAIL PROTECTED] wrote:
Seems I killed it. The trans in Gump is truly
Exactly!
I do all my own work if at all possible. Some things I don;t do because
of time or tools needed but I find that when I let a professional do the
work it *invariably* comes back with something not done or not properly
done. I''m not talking about 1 or 2 shops, as I try to find
Alex Chamberlain wrote:
John Robbins wrote:
Sounds about right to me just given the numbers. Maybe $300 for parts
(custom mixed paint, mostly) and then the rest for labor at about
$30/hr? But why so much labor---are they planning to strip all the
trim in order to paint?
I have no idea... I
Sadly, I only have one spare. (If I had two dead rats
I'd give you one...) To really twist the knife, though,
it was sitting in the bed of a pickup truck next to
its source in the U-Pull one day. They'd been after
the clutch or something... I figured that it wasn't
going to get any easier than
You need to call this one the Chicken Cross the Roadster
--R
Jim Cathey wrote:
Pick-up day! I assembled my tool kit and a tow strap, and I made
arrangements to fetch my neighbor along for a lunchtime run to Post
Falls. I'm also bringing my electrical troubleshooting manual, I may
try to
Just for the record, let me say that you're clearly not right in the
head...but, that's probably a good thing, eh? Keep on, keepin
on...sucker.
That's me! Would _you_ really pass up a $2k SL that was ready to
drive with a good chance of only a little soldering required?
Oh wait, you live
You need to call this one the Chicken Cross the Roadster
I can't! If I name it it might stay. Not allowed.
-- Jim
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To
Curt Raymond wrote:
So today I check Mobil's website and darned if they don't say 15w50 is SM/CF.
Could explain the $2 a jug rollback at my local Walmart if the spec just got
changed from SL to SM. I can't remember how old the SL spec is.
I doubt that M1 gets reformulated much when a spec
can't open it.'
Wilton
- Original Message -
From: [EMAIL PROTECTED]
To: mercedes@okiebenz.com
Sent: Wednesday, August 01, 2007 9:46 AM
Subject: Mercedes Digest, Vol 21, Issue 4
This message has been processed by Symantec's AntiVirus Technology.
Unknown.data was not scanned
can't open it.
Wilton
- Original Message -
From: [EMAIL PROTECTED]
To: mercedes@okiebenz.com
Sent: Wednesday, August 01, 2007 9:46 AM
Subject: Mercedes Digest, Vol 21, Issue 4
This message has been processed by Symantec's AntiVirus Technology.
Unknown.data was not scanned
[EMAIL PROTECTED] writes:
Well, this speaks to your mentality and your life style. I am
retired have the time and reading skills to process rebates
properly.
I can read just fine thank you. I did preface my remarks with YMMV
and stated the simple FACT that I often have NOT received the
Yeah, I can believe it closer to Ithaca. I'm usually on the other side of
Corning.
Hmm, no fraid I'm going looking for a Prius. I only got the benz to run on
veggie and I'm getting tired of the mess, effort, time and bears. Without
the veggie it's simply a nicely engineered old boat.
I want
Levi,
There are actually several 123's right in this area. Many more the
closer you get to Ithaca.
Buy mine and sell yours.LOL
Mike
Wow, and here I am getting near time to sell my 83' 300D greasecar that's
located about 20 minutes from there... Just seems odd since I hardly
ever
see
Wow, and here I am getting near time to sell my 83' 300D greasecar that's
located about 20 minutes from there... Just seems odd since I hardly ever
see any other 123's around...
Levi
On 8/1/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hi John,
It is in Montour Falls, NY 14865.
Mike
If I can get this sold and get the money to fix my truck I will work with
anyone on this list as much as I can to get it delivered for just the cost
of fuel.
Mike
Hi John,
It is in Montour Falls, NY 14865.
Mike
[EMAIL PROTECTED] wrote:
I have decided to sell my 83 300TD. I never have
[EMAIL PROTECTED] wrote:
I have decided to sell my 83 300TD. I never have time to mess with it
to even see what is the matter with the transmission. The engine runs
great, starts right up no problem.
Where's the car?
___
http://www.okiebenz.com
For new
Just for the record, let me say that you're clearly not right in the
head...but, that's probably a good thing, eh? Keep on, keepin
on...sucker.
That's me! Would _you_ really pass up a $2k SL that was ready to
drive with a good chance of only a little soldering required? As
long as you
Stopped at Walmart to get oil for the car. Noticed they had Mobil 1 15w50, note
thats not 15w50 EP just regular 15w50. Good price too, $20/5qt.
Wait, this stuff is SL/CF... They also had some 5w40, thats CI,CI-4. Should
be better oil. Well its more expensive anyway, $23/gal.
I bought all the
Hey All,
I have decided to sell my 83 300TD. I never have time to mess with it
to even see what is the matter with the transmission. The engine runs
great, starts right up no problem.
The fuel tank is rusty and is plugging the primary fuel filter often so
that needs taken care of and the
Hi John,
It is in Montour Falls, NY 14865.
Mike
[EMAIL PROTECTED] wrote:
I have decided to sell my 83 300TD. I never have time to mess with
it
to even see what is the matter with the transmission. The engine runs
great, starts right up no problem.
Where's the car?
I tend to agree Jim.I had an old Chebbie truck that was bad about
locking between gears if you shifted it too fast...The column shift
bushings were loose. Had to get under it many times a pry it out of gear
in the middle of traffic..
Mike
Sadly, I only have one spare. (If I
On the other hand how many of us have owned cars where a PO
butchered something or other in his attempt to fix it.
Theres a time and place for pros, and when they are needed they are
worth paying for. Note, by pro I am not referring to the 18 year
old wrench yanker at [insert your franchise auto
Can't open it.
WILTON
- Original Message -
From: [EMAIL PROTECTED]
To: mercedes@okiebenz.com
Sent: Wednesday, August 01, 2007 2:37 AM
Subject: Mercedes Digest, Vol 21, Issue 2
This message has been processed by Symantec's AntiVirus Technology.
Unknown.data was not scanned
Can't open it.
Wilton
- Original Message -
From: [EMAIL PROTECTED]
To: mercedes@okiebenz.com
Sent: Tuesday, July 31, 2007 10:29 PM
Subject: Mercedes Digest, Vol 21, Issue 1
This message has been processed by Symantec's AntiVirus Technology.
Unknown.data was not scanned for
Jim Cathey wrote:
Honestly I find it hard to believe that your tranny
is actually dead. Locked up, sure. But I'd think
you could grab a wrench and dive into it and probably
get it loose again.
Offer to trade trannies with him for $100. Then you can
Catheyize Gump's tranny and write all
Visited a u-pull yard (first time at that sort of place) that
specializes in imports. It is about about a 30 minute drive from my
house. Was not even aware that it existed, until I was referred there
by our local salvage yard.
Found a left-hand rear jump seat for my Nissan Frontier that I have
I restored the vacuum system to normality from yesterday's
jury-rigging. I jacked up the rear of the car and removed the plastic
shield for the fuel pump assembly. The rubber boots for the
electrical connections are bad, but the connections were still good.
I checked, and power was not getting
Offer to trade trannies with him for $100. Then you can
Catheyize Gump's tranny and write all about it.
Bring his by in a box with a six-pack and I could
spend a coupla hours dinking with it. At least
until the beer ran out!
-- Jim
___
Allan Streib wrote:
Theres a time and place for pros, and when they are needed they are
worth paying for. Note, by pro I am not referring to the 18 year
old wrench yanker at [insert your franchise auto repair service here].
I've had similar problems to Larry since I quit wrenching over 15
Levi Smith wrote:
I want something newer that's about as cheap as it can be on fuel without
being a hassle.
Then how about some proven technology, like a Geo Metro XFI or Honda CRX HF,
either of which get more MPG and are easier to fix than a Toyota Priapism.
There's also the Honda Civic VX
All items I've thought of, but the XFi and HF's and VX's(haven't looked much
for the HX's) are first off, all still 10-20 years old and beyond that, they
seem to be rarer than hens teeth. I've had searches up for more than a year
now and in total I think I've seen maybe one HF that hadn't had an
The local yard here is called Pick-A-Part, and their prices are all posted
and non-negotiable...unless it comes to deciding whether it's a specific or
misc. item, which sometimes has a significant price difference. I much
prefer their pricing scheme, over the older hit n' miss yards of yore.
On
Visited a u-pull yard (first time at that sort of place)
...do you normally negotiate prices at a place like
The U-Pulls (where you pull your own parts) seem to
be pretty much take-it-or-leave-it kinds of places.
Big conventional yards are also non-negotiable.
Just like in any other business,
I would dicker with the guy at the foreign auto parts salvage yard I
went to occasionally, if I was buying a bunch of little bits. He was a
middle eastern guy, seemed to be by way of Mexico, didn't seem to phase
him a bit, and acted like it was a normal way to do things, which I
think it was.
So do any of these foreign parts yards have any Iveco trucks in them?
Mike
I would dicker with the guy at the foreign auto parts salvage yard I
went to occasionally, if I was buying a bunch of little bits. He was a
middle eastern guy, seemed to be by way of Mexico, didn't seem to phase
him
This one didn't. There are truckish salvage yards I see on my
occasional travels through the southern states, probably is some sort of
network of them. Check the Insurance Auto Auctions as they sell wrecked
stuff to salvagers, there might be some link off their site?
--R
[EMAIL PROTECTED]
Robert Bigham
[EMAIL PROTECTED]
EarthLink Revolves Around You.
[Original Message]
From: Robert Bigham [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: 8/1/2007 8:44:46 AM
Subject: Re: [MBZ] Rear end gear ???
Hello Mike
My car is a European Model 123.223, and the VIN is
Hey Wilton, can you open it?
--R
wilton strickland wrote:
can't open it.'
Wilton
- Original Message -
From: [EMAIL PROTECTED]
To: mercedes@okiebenz.com
Sent: Wednesday, August 01, 2007 9:46 AM
Subject: Mercedes Digest, Vol 21, Issue 4
This message has been processed by
On 8/1/07, Allan Streib [EMAIL PROTECTED] wrote:
Theres a time and place for pros, and when they are needed they are
worth paying for.
I agree, although I find that those times are pretty few and far
between. I'd say 90% of the time I pay my indy to do something, it's
a job that I could do
In a message dated 7/31/2007 4:13:47 P.M. US Mountain Standard Time,
[EMAIL PROTECTED] writes:
So, does anybody have a 12VDC MB rocker switch, such as defogger, air
recirculation or rear dome light switches on my 87 300D center console
available that I may use to control power to my
An embedded and charset-unspecified text was scrubbed...
Name: not available
Url:
http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20070801/c851d349/attachment.pl
___
http://www.okiebenz.com
For new parts see official list sponsor: http
Correct link
http://boston.craigslist.org/bmw/car/385588582.html
-
Luggage? GPS? Comic books?
Check out fitting gifts for grads at Yahoo! Search.
___
http://www.okiebenz.com
For new parts see official list sponsor:
No Kaleb offersLOL I need to get as close to $1500 as I can but I
need parts for my truck so cash talks..
Mike
Hey All,
I have decided to sell my 83 300TD. I never have time to mess with it
to even see what is the matter with the transmission. The engine runs
great, starts right
Can't read it as attachment.
Wilton
- Original Message -
From: [EMAIL PROTECTED]
To: mercedes@okiebenz.com
Sent: Wednesday, August 01, 2007 11:14 AM
Subject: Mercedes Digest, Vol 21, Issue 5
This message has been processed by Symantec's AntiVirus Technology.
Unknown.data was
I am in NY state so maybe
Mike
If you're in the north east or possibly southern california you might
stand a chance of finding Iveco parts. They didn't sell too many of the
things anywhere else in the country. Around here , parts are non
existent for the things.
Robert
If you're in the north east or possibly southern california you might
stand a chance of finding Iveco parts. They didn't sell too many of the
things anywhere else in the country. Around here , parts are non
existent for the things.
Robert
[EMAIL PROTECTED] wrote:
So do any of these
JC should buy that and name it the Chicken Coupe
BTW, why do chicken coops only have 2 doors?
--R
Frederick Moir wrote:
Correct link
http://boston.craigslist.org/bmw/car/385588582.html
___
http://www.okiebenz.com
For new parts see official list
Used prices are traditionally set at 50% of the new cost, or less depending
on availability and supply/demand.
If you are looking for parts at a junk yard you should *always* know the
price of the part new before going in.
Larry T (67 MGB, 74 911, 78 240D, 91 300D)
www.youroil.net for Oil
LarryT [EMAIL PROTECTED] writes:
Used prices are traditionally set at 50% of the new cost, or less
depending on availability and supply/demand.
If you are looking for parts at a junk yard you should *always* know
the price of the part new before going in.
The price I paid was about 20 - 25%
Allan wrote:many of us have owned cars where a PO
butchered something
Hi Allan,
I'm sure that happens. but personally, I take great pride in doing
things the right way. Jury rigging something is only useful to get home so
it can be repaired properly. Naturally, if I can;t do it myself I
LarryT [EMAIL PROTECTED] writes:
Hi Allan,
What is name location of this yard?
It is called Brickyard Parts, they are in Brooklyn, IN a little south
of Mooresville on IN-67.
http://www.brickyardimportedcars.com/
I did not have any luck with their online search or email -- I ended
up calling
Hi Allan,
What is name location of this yard?
Thx -
Larry T (67 MGB, 74 911, 78 240D, 91 300D)
www.youroil.net for Oil Analysis and Weber Parts
Test Results http://members.rennlist.com/oil
PORSCHE POSTERS! youroil.net
Weber Carb Info http://members.rennlist.com/webercarbs
.
- Original
On 8/1/07, John Robbins [EMAIL PROTECTED] wrote:
Next time I go back there I'll ask them what all they plan on taking off
(I don't think the trim that goes up the side of the window down the
rest of the car is removable is it?)
The black strip that runs along the edge of the roof, where the
You must have a special tool or have made one to
reinstall the rain gutter trim on the 123 chassis. I
would not encourage anyone who doesn't have the tool
or access to one to attempt replacement, as it's a
near-impossible job without it.
That's not to say you can't do it (I have) but having
On 8/1/07, LWB250 [EMAIL PROTECTED] wrote:
You must have a special tool or have made one to
reinstall the rain gutter trim on the 123 chassis. I
would not encourage anyone who doesn't have the tool
or access to one to attempt replacement, as it's a
near-impossible job without it.
John and I
Having been born and raised in central Indiana, you
make me wonder what ever happened to Wrecks, Inc.
(We meet by accident) up around Zionsville?
I don't recall there ever being any decent PP import
yards in the immediate area...
Dan (formerly of Indianapolis Greenwood, IN)
--- Allan Streib
Jimminy crickets, I had forgotten that was yours.
That would be a good start for me. About all I remember from that
car was dodging the wasps while trying to keep out of the coming rain.
It may provide parts enough to rebuild one way or the other. I have
had no luck at Benz Friendz. They
Offer to trade trannies with him for $100. Then you can
Catheyize Gump's tranny and write all about it.
Good plan, Mitch! I think that the word Catheyize should be in the
American Automotive Dictionary.
Kevin in Portland, OR
1983 300SD 267Kmi, Ursula
___
fraid I'm going looking for a Prius.
ON that note, I've thought about getting one of the new Highlander Hybrids,
but the 3500# tow rating isn't enough for my 4000# boat, darn it! Average
fuel mileage for a 4WD model is 29MPG, and we're talking about a 2 ton plus
SUV!
Kevin in Portland, OR
I'll take the first $1500 for it.
There's an '82 300TD on CL here in Portland for $1650 with head gasket
problems (probably needs a new engine but possibly not). I've seen it creep
down from $1950 during the past few weeks. It's awefully tempting and would
be more so if I had a place to work
the Chicken Cross the Roadster
That's funny! Should we start a Name Jim's Roadster contest?
Kevin in Portland, OR
1983 300SD 267Kmi, Ursula
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email
It may be a great way to make them come down on price, where the car
nice enough. Having to invest 10-20 hours to change out the part
brings the value down a bunch for anybody who knows the model. A
newbie would not have any idea and would pay top dollar.
On 31 Jul 2007, at 23:39, Kevin
I might be able to get Rusty to ship one for that price.
clay
;-)
On 31 Jul 2007, at 23:56, Zach wrote:
Ahhh... Went back and read the need trans fast thread
You can have this one for $800! No returns. ;)
--- Zach [EMAIL PROTECTED] wrote:
I have the gearbox out of that blue
I would dive in, but SWMBA is very upset with my wrenching and cursed
me for allowing a $1.50 part install to lock up the trans. She has
taken my wrenches and is contemplating my coming out of retirement to
give me something other to do than break cars. Has something to do
with wanting
The one I attend has a price list and that is what you pay.
Sometimes the counter people like you and know you, so they cut a
deal on things and call it all good. If you are a jerk, they will
count and charge for every little item, but I am nice and get a 4 for
3 price on things or
That sounds tempting. I could use a drive out east to visit family,
drop off some home brew and chat while we cover me in grease to show
me how simple it would have been to dink the locking loose.
clay
On 1 Aug 2007, at 07:04, Jim Cathey wrote:
Offer to trade trannies with him for $100.
Sorry about that!
IIRC, the 126 and 124 rain gutter trim is held on by
some phillips head screws from the bottom of the door
frames, isn't it?
Dan
--- Alex Chamberlain [EMAIL PROTECTED] wrote:
John and I are talking about 124s here. :) I'm
sure you are right
about the 123, Dan---if anyone
Lupines eat lapines, and run amok in Kent
You just don't get it. do you?
RLE
**
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
___
http://www.okiebenz.com
For new parts see
Kevin Kraly wrote:
fraid I'm going looking for a Prius.
ON that note, I've thought about getting one of the new Highlander Hybrids,
but the 3500# tow rating isn't enough for my 4000# boat, darn it!
That's only 14% over spec, and I suspect spec is very conservative.
My dad's 17 foot
I saw that and emailed yesterday and so far have gotten no reply.
-Curt
Date: Wed, 1 Aug 2007 09:42:28 -0700 (PDT)
From: Frederick Moir [EMAIL PROTECTED]
Subject: [MBZ] 83 300CD
To: Mercedes Discussion List mercedes@okiebenz.com
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain;
LWB250 wrote:
IIRC, the 126 and 124 rain gutter trim is held on by
some phillips head screws from the bottom of the door
frames, isn't it?
Thanks guys for all the info! So it appears that this estimate is
fairly inline, and that there isn't a very specific tool needed (like
the 123 cars).
http://seattle.craigslist.org/est/zip/387030799.html
If your back end sags, this guy may have the solution
clay
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To
On 8/1/07, Mitch Haley [EMAIL PROTECTED] wrote:
Kevin Kraly wrote:
ON that note, I've thought about getting one of the new Highlander Hybrids,
but the 3500# tow rating isn't enough for my 4000# boat, darn it!
That's only 14% over spec, and I suspect spec is very conservative.
FWIW, I've
Well, ship her some of Kaleb's cars, and let her have at it!
--R
Redghost wrote:
Has something to do
with wanting me to get out of her garage so she can part there this
winter.
___
http://www.okiebenz.com
For new parts see official list
No, my wife has been gone for about 4 weeks now, taking care of her mother.
--R
[EMAIL PROTECTED] wrote:
Lupines eat lapines, and run amok in Kent
You just don't get it. do you?
RLE
___
http://www.okiebenz.com
For new parts see
Because I haven't been able to read any posts for last 3 days ('been getting
'em as un-openable attachments), I'll try this again:
So, does anybody have a 12VDC MB rocker switch, such as defogger, air
recirculation or rear dome light switches on my 87 300D center console
available that I may
Thx Allan - I'l call them tomorrow. BTW, did you notice any Porsche 911s?
Larry T (67 MGB, 74 911, 78 240D, 91 300D)
www.youroil.net for Oil Analysis and Weber Parts
Test Results http://members.rennlist.com/oil
PORSCHE POSTERS! youroil.net
Weber Carb Info http://members.rennlist.com/webercarbs
Doesnt Run but I bet there is nothing wrong with it.
Just got posted to craigslist, someone go buy it before I lose the
battle with my greed.
-Zach
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used
French rabbit (lapin) spam?
On 7/31/07, Rich Thomas [EMAIL PROTECTED] wrote:
Lapines?
--R
[EMAIL PROTECTED] wrote:
spamspamspamspamspamspamspamspamspamspamspamspamspamspam
spamspamspamspamspamspamspamspamspamspamspamspamspamspam
Lupines.
RLE
Was bedeutet Joost bitte?
On 7/31/07, Craig McCluskey [EMAIL PROTECTED] wrote:
On Tue, 31 Jul 2007 11:19:57 -0400 andrew strasfogel
[EMAIL PROTECTED] wrote:
Qu'est ce que c'est Joost?
Bitte, wiederholen Sie dass auf Deutsch. Dies ist ein List fuer ein
deutsches auto, nicht wahr?
Craig
A Prius? C'mon, stay close to the herd and get a TDI. Better fuel economy
on average if you do highway driving, and environmentally cleaner because no
battery with associated complications.
Chris Kueny ([EMAIL PROTECTED])
78 Chevy Custom deluxe
'85 300TD
'02 Subaru Outback
Hmm, no fraid
You don't even need a wrench, but a channellock will help, unless it
is a floor shift toploader with the single arm on top. then you need
to take it out and take the top off at least.
At 08:12 AM 8/1/2007, you wrote:
Sadly, I only have one spare. (If I had two dead rats
I'd give you one...)
Floor shift or column shift?
NON MB manual trans are famous for not getting out of one gear before
the other gear is engaged (different shift linkages) On my column
shift bronco, I would frequently have to crawl under and disengage
one linkage manually. I HAVE had that also happen on column
YOu are bad!! The last time one of those popped up here I ended up
with Gump. now I have to see if I can find a way to get that TD here.
clay
On 1 Aug 2007, at 15:51, Zach wrote:
Doesnt Run but I bet there is nothing wrong with it.
Just got posted to craigslist, someone go buy it before
Loren
Floor shift, three arms. Middle arm is reverse. All were very easy
to move prior to removal of shift arm and replacement of the
bushing. Tried to both gently and vigorously disengage each shift
arm to get into a neutral position with them unhooked from the
linkages. Then I had
Where is it posted? Are you talking about Redmond, WA? $300 for a TD is
definitely exciting to me, even though it's a NA model. On that note, I've
been toying with the idea to get a 300tD for some time now. The W115 is
nice, but won't fit 4 people and my big 90# Labrador. For those of you
Wilton,
drop me a line offlist. I have your switch.
Eric
--- wilton strickland [EMAIL PROTECTED] wrote:
Because I haven't been able to read any posts for
last 3 days ('been getting
'em as un-openable attachments), I'll try this
again:
So, does anybody have a 12VDC MB rocker switch,
Thnx, Eric. Which switch do you have? What'll you take for it?
Wilton
- Original Message -
From: eric peterson [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, August 01, 2007 8:38 PM
Subject: Re: [MBZ] Rocker switch
Wilton,
drop me a line
Doesnt Run but I bet there is nothing wrong with it.
Just got posted to craigslist, someone go buy it before I lose the
battle with my greed.
You have my blessing to go get it. What more do you need? :-)
(If I were closer, so might I, may I R.I.P.!)
-- Jim
1 - 100 of 126 matches
Mail list logo