Re: [MBZ] cells

2010-06-11 Thread RELNGSON
Yesterday Washington State's no hand held cellphones while driving law went into effect. $124 fines and no warnings. So the morning paper has a picture of a woman in a Toyota Pious being ticketed by a State Trooper. Heartwarming. RLE ___

[MBZ] Harrier landing

2010-06-11 Thread RELNGSON
  http://www.liveleak.com/view?i=28e_1275619112 ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] the grid

2010-06-10 Thread RELNGSON
I used to use the grid to correct B-52 heading systems on very low altitude practice navigation routes and bomb runs - the grid is oriented to true north. . Back when I was a student pilot, I spent a lot of time flying square patterns at 500 feet or so with my instructor following

[MBZ] Internet car forums

2010-06-09 Thread RELNGSON
www.autoblog.com/2010/06/08/video-what-happens-in-an-internet-car-forum/ RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] The chairman's...

2010-06-08 Thread RELNGSON
Man!  That rust looks pretty impressive!   Is this going to be a daily driver?   I hope the engine looks better cared for than the outside?... I gather Illinois doesn't have any sort of vehicle safety inspection. I don't think I've ever seen a worse looking car. And that includes the

[MBZ] And now for something completely......

2010-06-08 Thread RELNGSON
After the female introduction and you have pushed your eyes back in with a warm spoon, take a listen. Notice their ages. http://www.wimp.com/threetenors/ RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

Re: [MBZ] no cat?

2010-06-07 Thread RELNGSON
Bypassing an OE cat carries a heavy fine if you are caught. Where? My Porsche hasn't had a cat since 1985 or so and always passes emissions easily. There are no visual inspections here. RLE ___ http://www.okiebenz.com For new and used parts go

Re: [MBZ] no cat

2010-06-07 Thread RELNGSON
...It's called a piece of tubing and a gutted cat, it's done all the time. I've also heard of prybar and a hammer, and just going at it. Walt On Jun 7, 2010 4:58 PM, relng...@aol.com wrote: Bypassing an OE cat carries a heavy fine if you are caught. Where? My

Re: [MBZ] OT hen

2010-06-06 Thread RELNGSON
Uh, I believe that's Cominskey Park Jeez, I don't even look at the sports section but I know it's Comiskey. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

Re: [MBZ] 944

2010-06-06 Thread RELNGSON
The 944 was a pretty reliable engine if serviced according to the book. 150,000-200,000 miles between overhauls not a big deal.  Belts do need to be kept on top of, but that's true of any interference engine.  I watched a couple of friends do the belts, and it's not a really big job. 

Re: [MBZ] OT hen/Comiskey

2010-06-06 Thread RELNGSON
...You don't get it either... Very likely. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] OT taxes tips

2010-06-05 Thread RELNGSON
Yeah we got charged a service charge in a eatery and me being a tight wad, asked the managment what that is all about, turns out when there are more than 8 people in a party they are entitled to charge a service charge... It is not a case of entitled but is a common restaurant policy

Re: [MBZ] Flex discs

2010-06-03 Thread RELNGSON
...The drive shaft becomes disconnected from the transmission or rear end. It becomes a potentially lethal spinning rod of heavy steel driven by the remaining disc without anything to keep the disconnected end on-center... There is a photo on the net someplace showing the results of

Re: [MBZ] flex discs

2010-06-03 Thread RELNGSON
...Would a out-of-balance type of vibration at low speeds be a symptom of a failing flex disc?.. A failed front flex disc can total the car. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

Re: [MBZ] flex disc damage

2010-06-03 Thread RELNGSON
..Its not going to tear into the passenger compartment, you will just hear a lot of banging as you come to a stop... So now I have to find the photo I mentioned earlier? RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To

Re: [MBZ] flex discs

2010-06-03 Thread RELNGSON
How do you test flex discs in the car?  I've seen a defective flex disc out of a car which looked okay until it was twisted in a vise In my two 201s, three front flex discs were replaced under warranty. In all of them, the threaded inserts were coming loose. The '85 had two and the

[MBZ] B-25 flyover

2010-06-02 Thread RELNGSON
http://www.youtube.com/user/MsPolleyVision ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] chemical infusion

2010-05-29 Thread RELNGSON
...The glass tray spontaneously cracked in half.  We heard it, the microwave wasn't even being used.  Loud.  I used Shoe Goo to glue it back together... So, the fumes from that stuff getting into the food is OK? Oh wait, that might just explain RLE

Re: [MBZ] snook/wright

2010-05-27 Thread RELNGSON
Have they had to re-build/re-engineer the F. L. W. house yet to make it work?.. Good point. Just recently in Seattle there was a newspaper article and TV coverage of a Wright design house here that nobody wants because of the repairs it needs even though it is on Puget Sound waterfront

Re: [MBZ] W212

2010-05-27 Thread RELNGSON
This was in arkansas, and this stuff happens all the time in the car business.  She paid 50 something for it, they offered her like 35k trade, ended up giving her 42k, tahoes cost more than that these days.  In fact, they cost just about as much as a new E class does... I think the

Re: [MBZ] Pilkington

2010-05-26 Thread RELNGSON
...I've got to get a new windshield for my '95 E300.  The auto-glass guy I called recommended a Pilkington windshield vice PPG, as he says that PPG is now made in China but Pilkington is still made in North America (code for Mexico?) and has much better quality. Anyone have an opinion on

Re: [MBZ] Pilkington

2010-05-26 Thread RELNGSON
I have it in my '77 300D. It has lasted longer without getting beat up/pitted than whateveer was in it when I bought it. Seems like good stuff. Exactly my experience with my C300. In 2.5 years, the original glass had far fewer pits and such until the big rock hit dead center which

Re: [MBZ] tahoe?

2010-05-26 Thread RELNGSON
...One of my dealers got in a 2010 E350 in on trade with 4k miles.  Apparently they just bought it and the wife wanted an SUV so they traded it in on a Tahoe. ... Looks to me like they are having fun with the doofus here and he bought it. Even in OK, this is a real stretch. RLE

Re: [MBZ] Snook's house

2010-05-25 Thread RELNGSON
Mitch wrote: Can you imagine a family of two selling their 2150 square foot home because it's not big enough and they hope to have children someday? Well, Yes! :)  I can certainly imagine it because the house we are probably going to buy is 3000 Sq. ft. and there is just the two of us and

[MBZ] Checklist? Huh?

2010-05-24 Thread RELNGSON
Got Thrust? Start Engine First As the NTSB continues its discussion of pilot professionalism this week, it might consider the performance of two crews who, on separate occasions, neglected to start the second engine before attempting takeoff. The Wall Street Journal reported that both

Re: [MBZ] s this an SLK?

2010-05-19 Thread RELNGSON
Looks like an older SL with an oddball aftermarket bumper cover. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] .2 missing?

2010-05-19 Thread RELNGSON
...As I said before, I don't own the E320 anymore.  To be honest, I was glad to see it gone and have only Diesel MBs again.  It was a hotrod, though, for only a 3 liter engine... 3.2 RLE ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] hunting 124 update

2010-05-16 Thread RELNGSON
I usually do that because I neglect to get the alignment before the tires, but have never planned it that way!  However, if the car is in the air for the alignment, I don't see how tires would make a difference... Since alignments are done with the car on it's wheels, I suspect you

Re: [MBZ] fwd:hacking

2010-05-16 Thread RELNGSON
.RLE: Real life data for me, 39 years of driving diesel cars with mechanical injection, primarily Mercedes Benz. Utterly reliable. Hundreds of thousands of miles, maybe approaching a million of reliable  service. That is real life data So then, all of the hundreds (perhaps

[MBZ] Fwd: hacking?

2010-05-15 Thread RELNGSON
Mmm, mechanical injection that electrocrap. Give me a mechanical inject Bosch system (gasser or diesel) over efi any day. There's only one place efi is good imo, and that's on a 13B Mazda rotary. All info I see points to them liking it better than carb. The MegaSquirt crowd also has the

Re: [MBZ] Car hackers can kill brakes, engine, and more

2010-05-15 Thread RELNGSON
..*Car hackers can kill brakes, engine, and more*.. So, each time I enter my car which has an OBD2 port, I should look on the floor for a strange laptop or a trailing vehicle trying to destroy me or the car? Is ANY of this believable? Who in hell was paying these researchers to

Re: [MBZ] Classic Alfa?

2010-05-13 Thread RELNGSON
. I don't know why someone would do that to such a great old classic. If they want an Alfa with a V8 why not get a more common donor?.. I can see you have never owned an Alfa. Not exactly a paragon of reliability and I'm talking about a new one. Just because something is old doesn't

[MBZ] Volvo safety

2010-05-10 Thread RELNGSON
http://jalopnik.com/5533328/volvo-safety-demo-goes-wrong Be sure to scroll down to the comments. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change

Re: [MBZ] aux fan

2010-05-07 Thread RELNGSON
...Speaking of Aux fans, does anyone know when or under what circumstances the aux fan should come on in my car? It's a 1995 E320.  I have noticed the last couple weeks that if I drive very slowly and idle, that the temp gets pretty high.  Not in the red, but more than half way between

Re: [MBZ] patron saint of lost causes

2010-05-05 Thread RELNGSON
...Hey Fred who did you say was the patron saint of lost causes again?.. St. Kaleb, I think. But I ain't Fred. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

Re: [MBZ] C strength

2010-05-01 Thread RELNGSON
...Ed Booher wrote: Wouldn't driving through a brick wall have completely destroyed the rear end? Does make you wonder about the construction, doesn't it?.. Wonder what, exactly? The picture shows that the rear bumper and left quarter were not deformed. Another pic shows a big dent in

Re: [MBZ] the wall

2010-05-01 Thread RELNGSON
Does make you wonder about the construction, doesn't it? Mitch... Oh wait. You meant the building, not the car. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/

[MBZ] New C-Class ventilates parking garage

2010-04-29 Thread RELNGSON
http://jalopnik.com/5526703/honey-you-parked-the-car-where Scroll down to read the comments. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change

[MBZ] Fast lap at the Nurburgring August 2009

2010-04-28 Thread RELNGSON
Click on the full screen icon: http://www.popsci.com/cars/article/2009-08/weird-looking-german-supercar-breaks-nurburgring-lap-record   RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

Re: [MBZ] tipping

2010-04-28 Thread RELNGSON
.What is the go with tipping? It is a cultural difference - we aren't expected to tip over here? I have read in the Lonely Planet Travel Guide the rate is between 10 - 15% for good service. In a decent sit-down restaurant, 15-20% is the norm now. Taxicabs,15%. Cafeterias, counter

Re: [MBZ] misused terminology

2010-04-22 Thread RELNGSON
...No, you are using it right, Max---I didn't mean to single you out.  I just thought it was generally a strange holdover.  We still speak of frame straightening and the like, even though the only frame the typical unibody car has is the stiffening rails from wheel well to wheel well to

Re: [MBZ] The value of ABS

2010-04-22 Thread RELNGSON
I really don't understand why you don't just fix it.  It's a safety system with proven worth - why not repair it? Except on loose surfaces, where ABS can actually do more harm than good.  (Such as fresh snow or slush, or gravel, or [like the road immediately outside our driveway] a steep

Re: [MBZ] 914 shift quality

2010-04-21 Thread RELNGSON
...I hated the feel of the shifter in a 914 - more than twice as bad as a VWbug. Soft and mushy... That would be in a pre-1973 model after which the side-shifter transmision was used. I converted my 1970 914-6 to a side shifter which solved the situation. Also, like many MBs, the

Re: [MBZ] Meigs no more

2010-04-18 Thread RELNGSON
In a message dated 4/18/10 5:00:18 AM, mercedes-requ...@okiebenz.com writes: .Dan wrote: That's Meigs Field, not Meggs. http://en.wikipedia.org/wiki/Meigs_Field Not anymore. mao.. That's because the crooked Mayor of Chicago, in violation of Federal law, sent city workers out

Re: [MBZ] test scores

2010-04-18 Thread RELNGSON
Wonk opines: ...Interesting trivia point. One must achieve a grade of 65% in ground school to be sent on to actually fly. 65 and fly was our mantra. Upon graduation from primary, the top grades go jets, the next batch goes props, and those at the bottom of the class go rotary wing.

Re: [MBZ] Meigs and the Mayor

2010-04-18 Thread RELNGSON
.Didn't he use the T word as justification?  Oddly, with no airport in  the area, use of the airspace would be much LESS restricted... And I won't even hazard a guess at the economic damage blowing the  airport (with all the associated businesses) away did... Well maybe an 

Re: [MBZ] A/B-26

2010-04-16 Thread RELNGSON
There I was having a stylishly late breakfast when I heard what sounded like round engines, getting closer. I hustled out onto the deck and to what did my wondering eyes should appear was an A-26, northbound at about 1500 ft. You can hear those two R-2800s a long way off. it's probably

[MBZ] World's worst autos

2010-04-13 Thread RELNGSON
Well, it's somebody's idea of the worst and they aren't far wrong. The comments are funny but accurate. Please, no posts: Well, my Vega (or Pinto) was a great car etc. We know better. http://editorial.autos.msn.com/slideshow.aspx?cp-documentid=1131799 RLE

[MBZ] PCA day at the NY Auto Show

2010-04-08 Thread RELNGSON
I can't imagine MBUSA doing something like this. http://www.youtube.com/watch?v=9fm3uVGHWnY RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change

Re: [MBZ] Auto show

2010-04-08 Thread RELNGSON
.PCA gatherings seem to have dwindled big time too, from what a few couple of members have told me Not in my Region (www.pnwr.org) and there will likely be about 900+ registrants at this year's Porsche Parade at the Pheasant Run Resort in St. Charles Illinois. RLE

Re: [MBZ] restore for how much?

2010-04-07 Thread RELNGSON
if you could restore it for another 10k  The key word there is IF A good restore costs $30k and is generally way more... I think you had better define restore before you go any further. RLE ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] restore

2010-04-07 Thread RELNGSON
I think you had better define restore before you go any further. .I was thinking redo the suspension and brakes, redo the interior reasonably close to stock, weld in new metal over any holes in the body, fill in all the dings with Bondo, and repaint. And isn't there supposed to be

Re: [MBZ] mobster wheels

2010-03-31 Thread RELNGSON
...The guy who suggested the owner might be a mobster may have a point, but what mobster would have ever bought an AMC Eagle wagon or a Pacer?... Gay ones? RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list

Re: [MBZ] separating

2010-03-31 Thread RELNGSON
Curt opines: .Considering there are MANY 300,000+ mile engines I'd say yeah they don't need them No mention was made of any effect on longevity. It's the damned noise. RLE ___ http://www.okiebenz.com For new and used parts go to

[MBZ] Racor

2010-03-31 Thread RELNGSON
Gerry Archer: http://www.jamestowndistributors.com/userportal/show_product.do?pid=6440 ...has a listing of physical sizes of various Racor filters. Do you know which Racor filter/water separator you have in your diesels,... My '78 300D (my only diesel) was sold in 1985 after seven years

Re: [MBZ] Racor service

2010-03-31 Thread RELNGSON
Randy'd: ..So, these doodads have a drain valve on the bottom to remove accumulated water - and a filter element that is replacable? How often would you change out the element?.. I don't recall any specified intervals because it depends on how much fuel passed through it. But, I

[MBZ] P-51 video

2010-03-31 Thread RELNGSON
I promise you will not regret the time spent watching this video and please share it with your friends.  http://www.asb.tv/videos/view.php?v=1bf99434br=500 The video has great resolution and should be watched in Full Screen, to do so click on the box with the arrow coming out of it in the

Re: [MBZ] dishwasher water lines

2010-03-30 Thread RELNGSON
Go to Home Depot and buy the length of line you need. Nobody uses solid lines any more. In fact, it's a bad idea. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

Re: [MBZ] water

2010-03-30 Thread RELNGSON
..I would point out that no MB diesel ever came from the factory with a water separator. .. I hope you are not suggesting that they didn't need one. Because I know better. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com

Re: [MBZ] wasser

2010-03-30 Thread RELNGSON
.No MB diesel came out of the factory with a water separator?  maybe so.  certainly none for the US market after 1960 or so had a separate device called a water separator.  However EVERY MB diesel has a well designed filter that pulls fuel off the TOP effectively trapping up to 8 oz or so

[MBZ] Sobering WW2 war photos

2010-03-26 Thread RELNGSON
http://blogs.denverpost.com/captured/2010/03/18/captured-blog-the-pacific-and-adjacent-theaters/ RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change

[MBZ] UK car humor, again

2010-03-25 Thread RELNGSON
What did the parody car-magazine site that Roger posted a link to a while back say about the Maserati Biturbo?? Something like By the strictest definition this is not an automobile, if the criteria for the latter include the capability of motion under its own power at least some of the time.?

Re: [MBZ] that $3000 924

2010-03-24 Thread RELNGSON
There are many good reasons to stay away from any 924. Particularly the Turbo. Porsche, like MB, BMW, Audi etc. has built some cars that seemed like a good idea at the time. But later on RLE ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] 924

2010-03-24 Thread RELNGSON
relng...@aol.com wrote: There are many good reasons to stay away from any 924. Particularly the Turbo. I thought the Turbo was the one that had better suspension and brakes than an Audi Fox. Was the 924S that sold alongside the 944 a better car than the old ones? Mitch I

Re: [MBZ] the competition

2010-03-20 Thread RELNGSON
Sat down at the Mac this PM and find 15 digests from Mr. Hilter's list and only only from this one. Gotta step up the pace, people. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

Re: [MBZ] shut down

2010-03-19 Thread RELNGSON
No, it is not a good thing.  No tinfoil-hattery is necessary to perceive the manifest safety issues. As has been amply demonstrated here and elsewhere in discussion of the runaway-Toyota issue, anyone but the driver having a say in when a car should be turned off (or on) is a recipe for

Re: [MBZ] Porsche

2010-03-19 Thread RELNGSON
...On Fri, Mar 19, 2010 at 7:13 AM, LarryT l02tur...@comcast.net wrote: Those are correct comments - the 911SC of 83-87 are widely considered to have bulletproof engines with some going 300K mi with never being opened up... The 911SC was produced from 1978 to 1983, all CIS cars, now a

Re: [MBZ] 911 rebuild costs

2010-03-19 Thread RELNGSON
Ed'd: ...Good reason to keep those chain tensioners in good working order!.. Sure enough although the hydraulic version ('84 and on) lowered that risk to the hardly ever range. The estimated OH cost is not for a broken motor, just worn out. I had the pleasure of a failed version 1

Re: [MBZ] Porsche refurbishments

2010-03-19 Thread RELNGSON
I wonder which is less expensive, and easier to find parts for now - a 911 or an XKE?  Those two, plus the pagoda roofed 280SL made my list --.. A 911, hands down. You can get any part from dozens of suppliers around the country because of the huge enthusiast base. Find a copy of a

Re: [MBZ] shut down?

2010-03-18 Thread RELNGSON
In a message dated 3/18/10 4:37:10 AM, mercedes-requ...@okiebenz.com writes: Dieselhead wrote: I am probably with mountain man on this sounds like a good reason to have a 240D.  I am sure Gummit motors has this capability on all their cars sold in the last decade. Only the ones

[MBZ] 25 minute chase of new C-Class

2010-03-17 Thread RELNGSON
http://www.kwtv.com/global/story.asp?s=12152184 http://www.news9.com/Global/category.asp?C=116601clipId=4626733; autostart=true RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

[MBZ] Re; no go

2010-03-16 Thread RELNGSON
.Zero drive no matter what I do. So if it's the drive ears, is it rR the torque converter?.. How old is the front flex disc? RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

Re: [MBZ] loose lines

2010-03-12 Thread RELNGSON
I believe excessive vibration was the cause of the failure of #6 line on my '87---it cracked right above the connection to the IP. Believe me, work hardening of a vibrating solid metal tube (vs flex) can lead to serious consequences when it breaks off. Speaking from personal

Re: [MBZ] work hardening

2010-03-12 Thread RELNGSON
...I had to look up work hardening, but that sure makes sense.  I did notice that the cracked line when removed had little or no give,.. I could have clarified that the tube will break off in a fitting that is not vibrating. I have to say that in my case it was a copper line but I would

Re: [MBZ] fantasies

2010-03-09 Thread RELNGSON
RT posts: .There was a scare story on the radio this morning about a Pious that unintendedly accelerated in Collyfawnya AFTER having the fix, was up to 90mph, a cop was following the guy and got in front of it to stop it until the guy could somehow shut it off. snip Just about 100%

[MBZ] Prius brakes

2010-03-09 Thread RELNGSON
...Makes me wonder why the brakes on a Pious could not stop the car -- the gas engine is not that powerful, but perhaps if regen braking is generally used in addition to mechanical means and that did not kick in, or maybe the pad brakes are wimpy?.. You may be onto something here. Those

Re: [MBZ] hunt and peck

2010-02-19 Thread RELNGSON
...Someone missed the sarcasm here. I think Roger meant a 1997, not 79... I never claimed I could type since I use the Columbus System. Find it and land on it it. The ML is a '99, of course. RLE ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] early ML

2010-02-18 Thread RELNGSON
Back to the ML's 4-matics in specific - what was wrong with the first series? Is it likely to be something that has already been repaired/replaced if they'restill on the road?... Sure, with updated parts likely paid by the warranty. My friend AC has a '79 ML320 that has been a gem,

Re: [MBZ] aux pump

2010-02-18 Thread RELNGSON
...Isn't it the aux water pump that gives us heat so fast on cold days? (faster than any other car I've driven).. The purpose of that pump is to keep water flowing through the heater core at or near idle in cars that pretend to have ACC. When the pump fails, the heater output temp drops

Re: [MBZ] good maintenance

2010-02-18 Thread RELNGSON
.Your friend has accomplished quite a feat, to preserve a 1979 ML320. It belongs in a museum I saw it just yesterday and it looks six months old. He formerly owned a trucking company and his last Kenworth, sold two years ago, looked about the same which was remarkable considering

Re: [MBZ] so useful

2010-02-16 Thread RELNGSON
Woger, If you call Rusty, he not only can get anything you need for your MB, he might even be able to supply parts for your front porche and your back porche  (or any other porche you may have).. Hi dopey... It just so happens that I have sourced a few items for my cars (shocks,

Re: [MBZ] DeLorean facts??

2010-02-16 Thread RELNGSON
...Anyway 2 cases he cites to further his stories are Tucker and Delorean. Well until I said But Keith, the Delorean was crap. I followed with A fiberglass body and stainless steel cladding plus a poorly made underpowered GM V6... He shut up quick on that one... It certainly wasn't a GM

Re: [MBZ] V-6 diesel

2010-02-16 Thread RELNGSON
06 went to the V6. Original tires on the 05 were H rated... The V-6 Bluetec was an '07. My friend AC has one and I have driven it. Utterly reliable, just like my W204. At last. RLE ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] V-6 confusion

2010-02-16 Thread RELNGSON
...Mitched: Oh, then I'm really an idiot. I thought the 320s were V6 and the 300s were I6... No, you are not. The 2007 Bluetec V-6 is badged E320 but it's not a 3.2. Weren't the inline sixes badged CDI? The Bluetec for the US market isn't. RLE ___

Re: [MBZ] SHOX

2010-02-16 Thread RELNGSON
So, how did those shocks work out on your porch? I never considered that but them my porch sits on concrete piles and has no springs so I am not sure how much help the shocks might be. Now if I was in California and had to worry about aftershocks, I might want them... Well now Clem,

Re: [MBZ] 204 wiper blades

2010-02-15 Thread RELNGSON
204 820 11 45 is a set, we sell for $38.00.. Which is not on your website. And the dealer sells the genune article by the each. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

Re: [MBZ] early 190E

2010-02-15 Thread RELNGSON
don't know anything about the car, but did find this in the technical data book: 190E 2.3,  201 .028,  102.985 engine, the tranny is 717.412, Engine has 9:1 compressioin ratio, 6k rpm max., 136 hp @ 5100 rpm, 151 lb./ft. torque @ 3500 rpm, premuim fuel. rear axle is 3.27:1, 0-62

Re: [MBZ] wheels

2010-02-15 Thread RELNGSON
.Early W201s were fitted with Bunts, at least for the European marketJaime No bundts for the US 201s. 14 flat face wheels until 1/85 and 15 from then on along with other changes. RLE ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] stock vs website

2010-02-15 Thread RELNGSON
...How can you not know by now that a large portion of Rusty's stock is not on the website. We talk about this nearly every single week... Because not all of the trivia on this list is memorized by me. And to be specific, the W204 (all models) uses one 24 type of blade, period. And the

Re: [MBZ] Luge accident

2010-02-15 Thread RELNGSON
.I feel guilty asking this, but has anyone seen the actual video of the accident?... Yes. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or

Re: [MBZ] luge accident photos

2010-02-15 Thread RELNGSON
...I feel guilty asking this, but has anyone seen the actual video of the accident?.. http://www.dailymail.co.uk/news/worldnews/article-1251087/Vancouver-Winter-O lympics-Nodar-Kumaritashvilis-body-sent-home-Georgia.html RLE ___ http://www.okiebenz.com

Re: [MBZ] 201 wheels

2010-02-15 Thread RELNGSON
...Nope, early 201's had 14 15 hole wheels. Bundts stopped in USA in 1985 Which is what I said without mentioning the hole count. The early '85 (until January production) was still really an '84 with the small wheels and no articulating wiper arm plus a lot of other changes including in

Re: [MBZ] Oil subbing

2010-02-13 Thread RELNGSON
...I think they make the aircraft oil red because it goes in the brakes so that when it is checked it can be seen to be the right stuff. Don't you need almost 4 quarts of oil to completely replace all the oil in the system?.. Urine can be substituted in a emergency. An aircraft crew

Re: [MBZ] 600 parts costs

2010-02-13 Thread RELNGSON
According to a recently retired (after 38 years) tech at my dealer, the heater panel (a row of buttons) cost is ten grand. He tended for years to a 50K mile black 600 SWB that I would see in the service department from time to time. I had the opportunity to look at the bottom side once when it

Re: [MBZ] Whistler

2010-02-12 Thread RELNGSON
As a motorcycle rider, I find some dark humour in the fact that his helmet didn't save him. (No helmet laws in Iowa.).. Uhhh, luge is feet first. Tonight's TV news showed the accident happening. Took about .5 second until he wrapped himself around the steel pole belly first. RLE

Re: [MBZ] website parts

2010-02-12 Thread RELNGSON
The web site is driven by one vendor, I have access to everything. If you don't see it on the web just call. We have it This week I decided I finally needed a pair of wiper blades for my '08 W204. But, no joy. None of the blades shown are for a W204. So I went to the dealer and after

[MBZ] Yet another craigslist link/not a 240D

2010-02-11 Thread RELNGSON
http://sfbay.craigslist.org/scz/ctd/1591281707.html RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] Canepa

2010-02-11 Thread RELNGSON
...Ought to be a crime to slap a bunch of tuner crap onto such a rarecar. Who are these Canepa people?  Surely a 959 is going to be less valuable as a collectible (not to mention as a piece of Porsche history) if it's been modified by anyone, with the possible exception of RUF. First,

Re: [MBZ] crash safety not

2010-02-10 Thread RELNGSON
What ever it is, we did verify that it's NOT a Smart Car ---.. And the sugar cane truck head-on (with a VW something) was nothing like this picture. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives

Re: [MBZ] No spare?

2010-02-08 Thread RELNGSON
...Bluetec benzes have no spare (or space for one), and require run-flats... Which Bluetec Benzes would that be? RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

<    7   8   9   10   11   12   13   14   15   16   >