include.
If a line consists of just "!", then the current filter rules are
cleared before adding any further rules.
If FILE is '-', the list will be read from standard input.
Coming back to the topic of this thread: I'm curious that nobody has mentioned
ansible/puppet/salt/... yet.
Best
Martin
Hello,
I was wondering which programs you use for replicating/copying/syncing
environments/configs on your openbsd systems with between your desktops (home
or work) and laptops?
Example programs for this could be syncthing, stow, chezmoi, etc.
Do you also maintain installeded/removed packages
On Mon, May 06, 2024 at 09:03:17PM +0100, James Johnson wrote:
> Hi all,
>
> can anyone please advise on what computer I can purchase with the following \
> requirements:
> - fully supports OpenBSD
> - no noise
> - good quality wifi
> - small form factor preferably
> - processor does not need to
a general match rule for NAT, which NAT’s traffic from all NICs.
Is it enough to do NAT for the VPN traffic, or do I need to implement a
separate rule for that purpose?
Regards, Martin
> Hello,
>
> Remember softraid isn't the same as hw raid and I will always chose hw over
> soft this includes zfs.
>
> Chris
I am sorry, but what relevance does your personal preferences have
to anything regarding this issue?
FWIW, I have seen more than one example of some really crappy
> On Thu, Apr 25, 2024 at 09:12:47AM +0200, Stefan Sperling wrote:
>
> > I checked, the softraid manual page already has an example installboot
> > invocation in EXAMPLES, which should be clear enough.
>
>
> Regardless, I've tweaked the wording a bit. Hopefully more clear now.
Indeed :) Thank
I eventually found out what was going on.
The FreeBSD boot problem was not related at all.
Long story short and for future reference, installboot needs
to be run on the softraid volume, NOT on the physical disk. And this
has to be repeated after a softraid volume rebuild in order for the new
> RAID replicates the data in the RAIDed area, yes?
>
> Do you have some reason to believe that the boot information (MBR, etc) is
> _inside_ the RAID area, because I do not believe that. Really feels like
> installboot needs to be run on this drive to, uh, install the proper boot
> info.
>
>
> FWIW, my current desktop which is a Dell OptiPlex 745 is booting off an SSD.
>
> joji@surya$ dmesg | grep -iE "optiplex|Samsung"
> bios0: Dell Inc. OptiPlex 745
> wd0 at pciide0 channel 0 drive 0:
>
>
> joji@surya$ uname -a
> OpenBSD surya 7.5 GENERIC.MP#82 amd64
>
> Don't know if your
Turns out this machine, for some reason, simply cannot boot of SSDs with
neither OpenBSD or FreeBSD on the box. Only spinning drives work.
It's an old Dell Inc. OptiPlex 980.
I suspect there is some issue with the BIOS of the machine and the BSD
bootloaders as Linux with GRUB works on SSDs.
Hello,
Are there any plans for providing pre-built images to be used on embeded
machines, like FreeBSD and NetBSD do?
It would be nice to run OpenBSD directly from a SD card on the Raspberry Pi e.g.
Regards, Martin
Hello Luis,
Do you have pf enabled on the router, and block all incomming traffic by
default?
If so, you need to permit the dhcp server to give response to your client, with
a rule like this:
pass in quick on ure0 inet proto udp from port 67 to port 68
Regards, Martin
Error Counter logging not supported
> >
> > Device does not support Self Test logging
The smartmontools wiki declares support for NVME as experimental and says
"Currently OpenBSD NVMe driver does not provide NVMe pass-through functionality"
https://www.smartmontools.org/wiki/NVMe_Support#SmartmontoolsNVMesupport1
Best
Martin
estart the permissions were probably kept,
so the next reboot didn't magically fix it. :-(
I added
Defaults umask_override
Defaults umask=0022
to /etc/sudoers
Thanks!
Best
Martin
ar/unbound/db/root.key
fi
/usr/sbin/unbound-checkconf || return 1
}
And now unbound starts again.
Any idea what caused this?
Best
Martin
OpenBSD 7.4 (GENERIC.MP) #2: Fri Dec 8 15:39:04 MST 2023
r...@syspatch-74-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERI
, and upgrade just those.
Regards, Martin.
router, I have base, comp and man installed, and I don’t want the X sets
on that machine.
Regards, Martin
thinks the man page could mention that.
Best
Martin
otocol version
Best
Martin
Am Mo., 23. Okt. 2023 um 17:14 Uhr schrieb Theo de Raadt :
> Martin Schröder wrote:
>
> > Am Mo., 23. Okt. 2023 um 16:54 Uhr schrieb Theo de Raadt
> > :
> > > So many, many words demanding that I configure my networks for ipv6.
> >
> > "is there an
Am Mo., 23. Okt. 2023 um 16:54 Uhr schrieb Theo de Raadt :
> So many, many words demanding that I configure my networks for ipv6.
"is there any reason openbsd.org still has no entry at the end of 2023?"
So the reason is "Theo doesn't want to configure his networks for v6"?
Best
Martin
Am Sa., 22. Juli 2023 um 23:15 Uhr schrieb Greg Thomas
:
> Have you read:
>
> https://www.openbsd.org/faq/faq11.html
Where does that mention KDE?
Best
Martin
P.S.: Please learn to quote
Am Di., 4. Juli 2023 um 23:20 Uhr schrieb J Doe :
> I checked: man ntpd and: man 2 adjfreq, and while: man 2 adjfreq
> mentions the same unit - "ppm" - it doesn't explain what that means.
>
> What does "ppm" stand for ?
microseconds per second.
for tunnelling be re-directed to the
wg IP, or just be open on the external interface?
Regards, Martin.
, a braille user can of course access a OpenBSD system
using braille, either via a serial console or ssh, from a linux machine.
The homepage for BRLTTY is:
http://www.brltty.com
Thanks!
Regards, Martin
ky
line-card format, they seem quite approachable for high-throughput,
small-batch hardware for systems running modern open-source network
operating systems.
Troy Martin | Head of Development
Araxes Networks
W: www.araxes.net | E: t...@araxes.net
T: 778-819-2801 | C: 604-690-5885
, please let me know.
Regarding pf, thanks for good advice regarding how to use NAT rules.
Regards, Martin.
interface?
I have a server running behind the router.
Will I be able to access it from the VPN with this setup, or do I need to
implement rules for that purpoce?
Regards, Martin
, Martin
Hello Brian,
I forgot to say that my site set did include the already prepared pf.conf, but
not rc.conf.local, where pf was set to be disabled.
As the result, pf started with rules for nat/firewall, not the default ones.
And that created the “problem”.
Martin
a port of brltty which can be run in “screen”, but the version is
really out-dated.
Regards, Martin
Hello,
I’ve installed OpenBSD/i386 7.3 on a Macbook 2006.
It works, but the fan is running at maximum all the time.
Is there anything I can do to optimize the system for such machines?
Here’s the output from dmesg and “sysctl hw.sensors”:
http://paste.debian.net/1278825/
Regards, Martin
who installed the
system, but rather a careless user who forgot to add a simple file to a tar
archive. :-)
Regards, Martin
install of the same version. (7.3)
Regards, Martin
to copy them to a USB stick, and mount it and get the files in
place without sighted help.
And the network interface can be configured with dhcp for now.
As soon as the machine is on the lan, I’ll ssh into it from a linux machine
with a braille display.
Regards, Martin
PS: I’ve now learned that one
https://www.pcengines.ch/eol.htm
The end is near for APUs :-(
Best
Martin
/root/pkg_list_manual
> pkg_add -za -l /root/pkg_list_full
Thanks, that helped.
Best
Martin
-R go+rX /usr/local/lib/python3.10/
as
sudo chmod -R go+rX /usr/local/lib/python3.10/encodings/
wasn't enough. :-(
Best
Martin
nks in advance
Martin
Am So., 16. Apr. 2023 um 14:56 Uhr schrieb lux :
>
> On Sun, 2023-04-16 at 14:41 +0200, Martin Schröder wrote:
> >
> > Fatal Python error: init_fs_encoding: failed to get the Python codec
> > of the filesystem encoding
> > Python runtime state: core initialized
>
ate: core initialized
ModuleNotFoundError: No module named 'encodings'
Current thread 0x0beeef85d660 (most recent call first):
dmesg is at https://www.oneiros.de/privat/openbsd/dmesg73.txt
Thanks in advance
Martin
e upgrade guide should mention...
Best
Martin
Am Do., 6. Apr. 2023 um 15:27 Uhr schrieb Why 42? The lists account.
:
> I'd like to create a "bridge" between two IP networks which will pass
> only multicast info. / traffic.
So it should only route FF00::/8?
Best
Martin
On Wed, Feb 08 2023, Crystal Kolipe wrote:
> On Wed, Feb 08, 2023 at 08:28:50PM +0100, Martin Kjr Jrgensen wrote:
>> I'm experimenting with turning an OpenBSD 7.2 box into a wireless access
>> point
>> (hostap) using a athn, em, bridge, vether devices and dhcpd.
>
&g
ng or is a feature missing?
/Martin
udio said, they
> don’t want to hairpin anyway.
But arp only works for vintage-ip.
Best
Martin
Am Mi., 11. Jan. 2023 um 21:06 Uhr schrieb Rodrigo Readi :
> It stopped to resolve some domains, for example qwant.com
All fine here.
> Any Idea what is happening?
Not without some logs.
Best
Martin
t startup of the daemon.
Best
Martin
Hello Stuart,
Can you recommend a USB 2 or 3 NIC which uses a different driver then ure,,
with good performance?
Does any of the known manufactures, Asus e.i, use a different chipset?
Martin
to “lock” the configuration I want?
So the USB3 NIC always become ure0, and the USB2 ure1.
Regards, Martin
Am Do., 10. Nov. 2022 um 11:22 Uhr schrieb Stuart Henderson
:
> On 2022-11-09, Martin Schröder wrote:
> > Am Do., 10. Nov. 2022 um 00:02 Uhr schrieb Martin Schröder
> > :
> >> This happens only on bootup of the machine... :-(
> >
> > I've tried hard to get a
hows the waiting, if any.
> (Of course, I know the address here - tweak as needed.)
What happens when your pppoe doesn't come up?
Best
Martin
Am Do., 10. Nov. 2022 um 00:02 Uhr schrieb Martin Schröder :
> This happens only on bootup of the machine... :-(
I've tried hard to get any log messages for this, but failed so far.
Neither setting a log file for unbound nor "unbound_flags=-d -d"
produced any output.
Best
Martin
the previous session wasn't terminated
> cleanly.
This happens only on bootup of the machine... :-(
Best
Martin
ssing in
> /etc/rc.conf.local? I have
None.
I suspect that pppoe is a bit slow at startup, so unbound somehow times out
but has no problems once the network setup/the machine is stable.
Best
Martin
home network; outside
connectivity is German Telecom DSL via pppoe.
dmesg: http://oneiros.de/privat/openbsd/dmesg.txt
unbound.conf: http://oneiros.de/privat/openbsd/unbound.conf
Any idea how to debug or fix this?
Thanks in advance
Martin
?
Regards, Martin
to run, and where?
Is there a good starting point somewhere for my scenarios?
Regards, Martin
ind of OpenBSD service.
This is correct. It is me that is listed as the contact person.
Zen Systems was sold to Nianet, an Danish ISP 7 years ago. Two year
later Globalconnect, another Danish ISP, acquired Nianet.
I am pretty sure you can remove that entry.
Best regards Martin
otten and no one
asked for it to be deleted.
I am pretty sure you can remove that entry.
Best regards Martin
to configure hostapd(8) as well?
If so, is there an example config out there for my situation?
I’ve looked at the sample, and it seems too complex for my needs.
Regards, Martin
I have tried using my NitroKey Pro 2 on my Openbsd 7.1 box using
gpg-agent with an empty scdaemon.conf file.
I get the same error if pcscd is not started.
If started, I can run all gpg card commands.
On Tue, Oct 18 2022, William White wrote:
> I have a Nitrokey Start that I use to hold my
y this happens? Heaavy IO or some bug with the hard disk driver?
Does someone of you have a clue why the system crashes and even the user
database gets corrupted in our setup?!
Best regards,
Martin Miethe
the debug setting in/etc/hostname.pppoe0, but that gives much
too much information.
Thanks in advance
Martin
Ignore the post.
It was software I had installed in my home directory.
I know the mv command is being asked to do the wrong thing.
It tells me that in 7.0.
Is it expected behavior for 7.1 versus 7.0 release?
Using 7.1 with all patches and all packages up to date.
mkdir A
cd A
mkdir B
mv ~/A B
mv: Abort trap (core dumped)
ace.
man security
man changelist
Best
Martin
Relinking to create unique kernel failed; after applying /var/db/kernel.SHA256 /bsd> and , this
is what my relink.log looks like:
(SHA256) /bsd: OK
LD="ld" sh makegap.sh 0x gapdummy.o
ld -T ld.script -X --warn-common -nopie -o newbsd ${SYSTEM_HEAD} vers.o
${OBJS}
LLVM ERROR: out of
Hi Stefan,
Just to check the issue is present, I've done live debug of pf rules to confirm
that DHCP traffic not blocked. It seems something wrong in obtaining IPv4
addresses from dhcpd. And problem lies outside pf I suppose.
Martin
‐‐‐ Original Message ‐‐‐
On Saturday, October 23
WLIUCGNM 0x01a2 WLI-UC-GNM
product MELCO WLIUCGNM20x01ee WLI-UC-GNM2
‐‐‐ Original Message ‐‐‐
On Saturday, October 23, 2021 8:55 AM, Stefan Sperling wrote:
> On Fri, Oct 22, 2021 at 07:02:20PM +0000, Martin wrote:
>
> > Hi Stefan,
> > Dev. pa
for your attention.
Martin
connected to AP based on athn USB
stick.
Tested only with portable devices, not PCs currently.
Looking forward to resolve this!
Martin
patched GCC
4x as default compiler?
Any suggestions can help!
Martin
Hi there!
In release notes it seems we can set more than one vCPU for guests running. The
question is how to set it in vm.conf to achieve better performance for existed
VMs?
Martin
.
Hope this helps to find the issue.
Martin
‐‐‐ Original Message ‐‐‐
On Saturday, July 17, 2021 1:57 AM, Sonic wrote:
> Having some issues after a sysupgrade to the latest snapshot (of this
> writing) - OpenBSD 6.9-current (GENERIC.MP) #131.
>
> Seems the base change to dhcple
to download it automatically.
Martin
‐‐‐ Original Message ‐‐‐
On Saturday, June 26, 2021 11:29 PM, jslee wrote:
> On Sun, 27 Jun 2021, at 02:06, Gregory Edigarov wrote:
>
> > I remember that for earlier versions of terraform all providers were
> > available as Open
I've set ulimit -d 400
All builds have been done fine once changed.
Martin
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Wednesday, June 23, 2021 6:15 PM, Sven F. wrote:
> On Wed, Jun 23, 2021 at 2:03 PM Martin martin...@protonmail.com wrote:
>
>
Hi list,
I try to build terraform-provider-aws and terraform-provider-google.
$ go build
produces an error "out of memory" .
May it be malloc related issue or how to fix it in other way?
Thank you for answer in advance.
Martin
Hi Dave,
You're right, name of VM is the same like in vm.conf. VM with different name
starts correctly. But the message about 'operation already in progress'
slightly confuses me.
Martin
‐‐‐ Original Message ‐‐‐
On Tuesday, May 25, 2021 10:57 AM, Dave Voutila wrote:
> Martin mar
and failed: Operation already in progress
Even if "$ vmctl check" shows ALL machines are stopped
if I stopped vmd I see proper error with non active vmd.sock
$ doas rcctl stop vmd
vmd(ok)
vmctl: connect: /var/run/vmd.sock: connection refused
Any suggestions can help.
Martin
.
Martin
‐‐‐ Original Message ‐‐‐
On Friday, May 21, 2021 7:08 AM, Stuart Henderson wrote:
> On 2021-05-18, BS Daemon b...@post.com wrote:
>
> >I like using the base OpenBSD utilities, and was
> >
> >
> > wondering if I'm doing something
Hi,
This command I'm looking for. Works great.
Martin
‐‐‐ Original Message ‐‐‐
On Monday, May 17, 2021 7:44 PM, Jonathan Thornburg
wrote:
> In message https://marc.info/?l=openbsd-misc=162125055304096=1,
> Martin asks how people adjust pointer
>
> speed on touchpads/mic
# make -f Makefile.bsd-wrapper obj
# make -f Makefile.bsd-wrapper build
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 19, 2021 1:42 AM, Theo de Raadt wrote:
> You are not building using the correct procedure.
>
> Sorry, we don't have time to teach that.
>
> Please use
Hi list,
I've tried to speed up pointer by:
xinput --set-prop 'USB MOUSE' 'CoordinateTransformation Matrix' 2 0 0 0 2 0 0 0
1.5
no effect.
How do people adjust pointer speed on their touchpads and mouses?
Martin
-LOADER: /usr/X11R6/lib/modules/dri without
problems as I think. The firmware is actual and supports integrated Radeon
since 6.9.
Maybe somebody knows what can affect on LibGl? I can't determine root of the
problem.
Martin
‐‐‐ Original Message ‐‐‐
On Sunday, May 16, 2021 1:08 PM, James Cook
error: failed to load driver: swrast
Any advice is this normal or not?
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 1:43 PM, Dave Voutila wrote:
> Martin writes:
>
> > Hi list,
> > Just wonder how to enable video acceleration on VMM gu
, like a physical computer.
For completely headless system I'd prefer OpenBSD and Alpine on VM. It depends
on goals.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 6:49 PM, David Anthony
wrote:
> Hi Martin,
>
> Do you have any notes on how to view Linux GUI app
No Window'es or Linux'es on the hosts, just OpenBSD. Anyway, Debian works great
on VMM, except the question's topic thing. Thank you for your attention)
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 6:25 PM, Theo de Raadt wrote:
> I am terribly sorry you aren't satisf
Hi Mike,
Did it already as you replied.
Thanks.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 6:20 PM, Mike Larkin wrote:
> On Wed, May 12, 2021 at 06:06:14PM +0000, Martin wrote:
>
> > Hi Dave,
> > Can you recommend any way to see online videos
Hi Theo,
Sure, for online videos I'm using OpenBSD host with appropriate browser
installed. Just wonder about VMM to move all 'potentially dangerous' things to
a linux VM and remove any browsers from the host.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 6:07 PM, Theo de
like a
charm.
Now I'm looking forward to exchange spamd to rspamd (it has DKIM signing
functionality) to replace spamd and dkimproxy which working in current
configuration.
Hope it can provide required functionality for IPv6 networks.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May
Hi Dave,
Can you recommend any way to see online videos without shuttering? Modern CPUs
can't smoothly play it in software emulation, unfortunately.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 1:43 PM, Dave Voutila wrote:
> Martin writes:
>
> > Hi list,
>
Hi list,
I can't find in spamd(8) how to enable IPv6 listener in addition to IPv4 one.
Is it possible to set spamd(8) to listen on both IPv4 and IPv6?
Martin
Hi list,
Just wonder how to enable video acceleration on VMM guest's side (Debian) if it
was possible. Maybe PCIe passthru should be present for that purpose?
virtio_vmmci and vmm_clock kernel driver modules doesn't help.
Martin
Hi,
Please consider to move to VirtualBox. No any problems with networking at all
on any host platform. Network works fine using OpenBSD VMM hypervisor too.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 9:48 AM, Moritz Grimm
wrote:
> Hi Masato,
>
> Thanks for
Hi,
Do you mean packages upgrade by using command:
$ doas pkg_add -uvi ?
If yes, you can remove failed packages for upgrade and reinstall them manually
by the command:
$ doas pkg_add package_name
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 9:06 AM, Артём Мазуров
lt (
type sndio
device "snd@192.168.33.1/0"
alsa don't use this config.
Do you have some experience how to use alsa modules to iteract with OpenBSD
sndiod server?
Martin
‐‐‐ Original Message ‐‐‐
On Sunday, May 9, 2021 9:49 AM, Alexandre Ratchov wrote:
> On Sat
nybody using pulseaudio or any other driver to have bidirectional network
audio stream between VMM guest and OpenBSD host system?
Martin
Hi list,
I'm looking a way to monitor SMART alike parameters of NVME drives in OpenBSD
6.9amd64. How do people monitor modern disks?
Martin
s in May and November."
Best
Martin
1 - 100 of 1512 matches
Mail list logo
