On 13/01/2008, Deanna Phillips [EMAIL PROTECTED] wrote:
Please try with -current.
Current installed. Still the same behavior. The mute led on kb is
light, and I can't turn it off. It works to stream with mplayer.. but
no should comes out of the hardware :(
# mixerctl -a
yep. the enabled acpi made the laptop reset right after boot prompt.
On 14/01/2008, Pierre Riteau [EMAIL PROTECTED] wrote:
On Jan 14, 2008 12:38 AM, Bachman Kharazmi [EMAIL PROTECTED] wrote:
On 13/01/2008, Deanna Phillips [EMAIL PROTECTED] wrote:
Bachman Kharazmi writes:
OpenBSD
[EMAIL PROTECTED] wrote:
Bachman Kharazmi writes:
outputs.speaker.eapd=off
Could you try setting that to on?
And try setting all of the volume levels to 200 or more. Some
laptops have very quiet speakers.
hi
I try to get sound of my hp nx7300, but the device seem to be muted.
I've checked the mixerctl settings. mplayer is playing a stream atm,
but there's no sound :(
The mute led is on at the keyboard, but nothing happens when I press the button.
Is this card unsupported or have I missed anything?
On 13/01/2008, Deanna Phillips [EMAIL PROTECTED] wrote:
Bachman Kharazmi writes:
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
Please try with -current.
OK, I've spent some time trying with a CURRENT snapshot. Right
Try the cd on a few more cd readers to make sure it isn't a specific
one that has problems. If that's done with no luck, then drop the
sender of the packages a email and describe your problem.
/bkw
On 06/11/06, Gustavo Rios [EMAIL PROTECTED] wrote:
Hey list members,
i have just received my
I've used trunk to make redundancy possible between two switches on
the same subnet (single shared virtual IP, and no STP usage).
from what I can read in the trunk man,
http://www.openbsd.org/cgi-bin/man.cgi?query=trunkapropos=0sektion=0manpath=OpenBSD+Currentarch=i386format=html
failover is
I always use
Option OffTime 5# Turn off DPMS monitor (DPMS)
in my Xorg.conf (section ServerLayout).
Never had a problem with that. Don't know much about
power-saving-modes. But you can at least see if OffTime works.
If you've xscreensaver installed I would suggest you to remove it
is this question obsd related? not really.
anyhow real men don't do backups, but google told me about
http://www.linux.com/article.pl?sid=06/08/21/1558230
/bkw
On 30/09/06, Bambero [EMAIL PROTECTED] wrote:
Hello
I need to recovery overwritten txt file.
Ex.
echo my data testfile.txt
echo
maybe it's orders AT kd85.com you should have sent this mail to...
/bkw
On 24/09/06, Federico Giannici [EMAIL PROTECTED] wrote:
In the last two or three years, at every release we always ordered a CD
and a poster. We always received the CDs, but NEVER received the posters!
This is for your
I think that one beat my wrap :)
Do you have any price information?
/B
On 19/09/06, Stuart Henderson [EMAIL PROTECTED] wrote:
I thought these look interesting, has anyone tried them already?
http://www.win-ent.com/MB-06047.htm
Is Pentium D (dual core) working by running bsd.mp?
I know it isn't listed at supported CPU's, but someone might been
booting one sucessfully.
/bkw
http://www.xfce.org/index.php?page=documentationlang=en would
probably also give you a hint about what you need to do the _default_
install
direct cut n paste:
###
in the top directory of each module, in the following build order:
1. xfce4-dev-tools
2. libxfce4util
3. libxfcegui4
4.
encoding issue solved by reading the ukbd man.
/bkw
On 26/08/06, Bachman Kharazmi [EMAIL PROTECTED] wrote:
now I've solved the problem by taking a bus to nearest computerstore
buying a usb-by-default kb from logitech (model: flat something..) and
it works flawless!
But in console it ain't
I was wrong about that it's blinking all the time, it does only when I
remove it from the mousepad.
Just to make sure the mouse is working I booted a knoppix live cd and
connected the mouse. And it works flawless... with this in dmesg:
usb 3-2: new low speed USB device using uhci_hcd and address
Hi
I've seen a plug 'n play adapter for usb to two PS2.
http://www.dvdmannen.se/upl/mediumres/%7B7CAA387A-C367-40A4-8A11-B1788B7DACAC%7D.jpg
I have a older kb/mouse I would like to use.
Are these adapters supported in obsd?
/bkw
one. But it still remains
american in console :/
I assume there are options to set the keymap for a external usb keyboard.
/bkw
On 26/08/06, Paul de Weerd [EMAIL PROTECTED] wrote:
On Sat, Aug 26, 2006 at 02:22:14PM +0200, Bachman Kharazmi wrote:
| Do you know if your kb/m is new hw that has usb
Hi
I've been using a optical logitech usb mouse without any problems.
But I've bought a new ms mouse(comfort usb mouse 3000) today which
I've some problems with.
When I connect the mouse the red light start blinking without stopping.
I've tried to boot -c ; disable pms* at boot without any
I use hotplugd to attach my usbstick. I works well, but I miss a
detach script which I couldn't find as a example in the manual so I
wonder if it's necessary. I've tried once to just disconnect the stick
without umounting the FS manually, and it worked.
messages shows:
Aug 24 16:24:54 venus
xorg.conf has a DPMS option which turns the monitor in powersave after a while.
Check if that option appear in your xorg.conf.
xset q also know if it's enabled or not.
/bkw
On 05/08/06, Andreas Bartelt [EMAIL PROTECTED] wrote:
Hi,
is there a way to disable to console screensafer in OpenBSD?
http://www.pingwales.co.uk/2005/06/03/OpenBSD-mail-server-config.html
/bkw
On 27/07/06, David B. [EMAIL PROTECTED] wrote:
sorry to bother, can anyone suggest a definitive book I should buy on how to
set up Sendmail on Openbsd 3.8?
I have looked all over the net for a HOWTO or an article that
While can't sleeping in my hot room, I started a website for
documentation. I used to contribute to openbsdsupport.org but when the
webmaster was very busy and a reply took more than two months if there
was any at all I decided to run something more up2date on my own.
the next section below is
This is not a obsd related question.
First make sure your screen and card can make that resolution.
Then include your xorg.conf and the Xorg log.
Please read the examples included first, and see if Xorg -configure can help.
here is what it can look like http://bkw.lindesign.se/tmp/xorg.conf
A week ago my open bsd firewall started to show a very strange behaviour.
I have the ssh-daemon running and ususally log-in remotely to be able to
administrate the pf.conf file. But now I cant log in. Ok, maybe I've just
forgott my password. I booted in single user mode and changed it, then
first I don't consider your problem as an obsd related, anyway. below
you might find a solution.
o make sure your monitor support powersave mode.
o in case you've any crap like xscreensaver, uninstall it or it will
never allow you to set DPMS settings from xorg.conf.
o read
to mention that the MASTERhost is on
OpenBSD sunshine-2 3.9 GENERIC#759 sparc64
and BACKUPhost
OpenBSD sunbird 3.8 GENERIC#607 sparc64
The problem with disconnections from various services (IRC,aim and
radio) still exist :/
/bkw
On 01/06/06, Dag Richards [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote
No counter-timer -- using %tick at 299MHz as system clock.
root on wd0a
rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
WARNING: / was not properly unmounted
On 01/06/06, Bachman Kharazmi [EMAIL PROTECTED] wrote:
After the change in pf.conf you suggested,
nat on hme0 from rl0:network to any - carp0
I
minimize the impact of this by upgrading your backup
boxes first, so there is only one loss of active states.
directly from http://www.openbsd.org/faq/upgrade39.html
thanks for all replies!
/bkw
On 31/05/06, Bachman Kharazmi [EMAIL PROTECTED] wrote:
I finally got CARP _working_ :)
I've a problem
I finally got CARP _working_ :)
I've a problem when I do ifconfig carp1 down on the MASTER host to
test if BACKUP takes over the traffic..
It does work so far. But the problem is that if I'm streaming Internet
radio or are connected to IRC the radio will get stalled when I do
ifconfig carp1
I've not used dvd's with obsd myself, but I assume you've read
http://www.openbsd.org/faq/faq13.html#playDVD
AND the link about how to mount DVDs.
http://www.openbsd.org/cgi-bin/man.cgi?query=mount_cd9660sektion=8
If the mount doesn't work, reply with error and the commands you ran.
/bkw
On
I had this problem a while ago...
http://marc.theaimsgroup.com/?l=openbsd-miscm=114021971311499w=2
/bkw
On 24/05/06, Nick Holland [EMAIL PROTECTED] wrote:
Adam wrote:
Hello,
I have an odd problem with my 3.9 server. I can not seem to push more
than 2.5 - 3.0 mbps per connection over the
On 25/05/06, J. Rodrigo Anabalsn [EMAIL PROTECTED] wrote:
Hi all.
Hi have a problem. I Installing OpenBSD 3.9 in me PC and in the X mode
(# startx) after one minute no used (aproximatly), the screen to off.
You don't run X as root, do you?
Anyway, it might be a DPMS issue with your monitor.
People have been asking me about env settings to boot a R12k.
Here comes everything you need, and now it will be found in the
archives by anyone.
--
/Bachman
---
Logs which worked with my R12k are shared without any guarantees.
/bkw
you used the excellent tools as google and
http://marc.theaimsgroup.com I guess...
I made some searching for you, here you go
http://marc.theaimsgroup.com/?l=openbsd-miscm=114345514930017w=2
http://www.countersiege.com/doc/pfsync-carp/
http://www.unix-tutorials.com/go.php?id=280
/bkw
On
It's recommended to use packages as long as you don't need any extra
options from what I can recall from FAQ.
man pkg_add
then sudo pkg_add
ftp://ftp.su.se/pub/OpenBSD/3.9/packages/i386/vim-6.4.6p1-no_x11.tgz;
note, it's 3.9 package and for i386 arch.
if you want gvim use the package without
Hi
I've problem to install 3.9 on my FS Amilo M3438G with a VIA VT6421
SATA and Intel 82801FB controller.
When the installation starts it says, no disk could be found.
In my bios I can only change minimized setting, I can't even see the
harddrive listed there, but I can see the cdrom.
I
solved
/bkw
On 29/04/06, Bachman Kharazmi [EMAIL PROTECTED] wrote:
I try to mount a nfs share over internet between two openbsd servers.
As faq describes rpcinfo -p on server should show that mountd listen
at udp: 633 and tcp: 916
But I get,
[EMAIL PROTECTED]:~/ rpcinfo -p
program vers
I try to mount a nfs share over internet between two openbsd servers.
As faq describes rpcinfo -p on server should show that mountd listen
at udp: 633 and tcp: 916
But I get,
[EMAIL PROTECTED]:~/ rpcinfo -p
program vers proto port
102 tcp111 portmapper
102 udp
On 25/03/06, Per Fogelstrvm [EMAIL PROTECTED] wrote:
On Friday 24 March 2006 08.36, David Coppa wrote:
On Thu, 2006-03-23 at 22:15 +, Miod Vallat wrote:
There is currently no X server support on sgi O2. This is being worked
on, but don't hold your breath.
I'm wondering if I can
Do you have any possibility to debug the freeze using a null-modem
cable and redirect all output from boot to serial?
This can be done with a serial cable and by typing:
set tty com0 at bootprompt.
I'm afraid your worst problem is that your lappy don't have com port..
/bkw
On 31/03/06, Peter
cd /usr/ports/devel pkg_info -M jdk will tell you where to put stuff.
/bkw
On 31/03/06, Joco Salvatti [EMAIL PROTECTED] wrote:
Hi all,
I have installed in my machine both firefox web browser and java
plugin (compiled on my own machine). The java plugin works fine with
opera, but I'd
Your order currently is:
- 1 [T23] Wireframe Blowfish Shirt (M) @ EUR 20.00
- EUR 10.00 [DON] DONATION to the OpenBSD Project
- Total: EUR 30.00 + Shipping.
This is what I can afford as a student. It's for the first time I
donate/buy anything from openbsd.org. I hope it helps a very little
bit
firewalls with
OpenBSD and PF (found at Amazon), would still be applicable today, or is
it a bit outdated. Thank You Danny
__
Get your FREE Central.co.za Email today www.central.co.za
--
##
BKW - Bachman Kharazmi
if someone want's to play around with it.
Per
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
Anyone who know what those two lines should look like if I created {a
b d e g h} partitions during the installation process (the whole disk
is used for openbsd).
SystemPartition=...
OSLoadPartition=...
It's a IBM 9GB SCSI disk in the slot next to the last one (seen from
back in right direction).
mission is to get X running on 'silikon'. I haven't found any
specific documentation about that at all...
thank you pefo making sgi arch supported.
/bkw
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
[demime 1.01d removed
at 0x
ARCS32 Firmware Version 1.10
SR=34010080
Found SGI-IP32, setting up.
And here it freeze, nothing else happens.
any ideas are welcome, /bkw
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
.
And here it freeze, nothing else happens.
I'll bet you did not connect a serial console to the machine.
Miod
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
ah!
my obsd fw is a generic pc which has serial port, I'll try to move
everything near it.
I might be a lucky guy anyway...
/bkw
On 22/03/06, Darrin Chandler [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
you're right, I missed that line in INSTALL.sgi.
and the worst is that none of my
cool, it booted and I'm setting up my disk now :)
thanks guys for all your replies.
/bkw
On 22/03/06, Bachman Kharazmi [EMAIL PROTECTED] wrote:
I've two SGI O2 R12000 at home from today for experimental use.
They've 32 of them unused at my uni so the admin said it was ok to
take two :)
Now
)
OSLoader=boot
OSLoadFilename=/bsd.rd
OSLoadOptions=auto
console=d
ConsoleOut=serial(0)
ConsoleIn=serial(0)
cpufreq=270
eaddr=08:00:69:0e:9b:ab
videostatus=illegal_env_var
On 22/03/06, Bachman Kharazmi [EMAIL PROTECTED] wrote:
cool, it booted and I'm setting up my disk now :)
thanks guys for all
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
bw_test_512MB:ETA: 1:08 101.21/512.00 MB6.03 MB/s
I increased the value to 10
thanks
/bkw
On 18/02/06, Melameth, Daniel D. [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
I'm running obsd 3.8 release on my gateway. Two xl nics are installed.
The GW does NAT
By the way, when I now have a proper download speed, I have to ask why
the default vaule of net.inet.tcp.recvspace is set so low?
I have a 100MBit inet connection so it was little confusing with my
earlier bandwidth limitation.
/bkw
On 18/02/06, Bachman Kharazmi [EMAIL PROTECTED] wrote
/
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
stored in ~ I think.
So how do you make your virtual users mail go to /var/mail/$USER, by
simply setting home directory (useradd -d) when creating the user?
/bkw
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
?
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
to configure sendmail for mutt ...
--
Jack J. Woehr # I never played fast and loose with the
PO Box 51, Golden, CO 80402 # Constitution. Never did and never will.
http://www.well.com/~jax # - Harry S Truman
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT
.
/bkw
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
://www.manucure-pro.com
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
On 10/23/05, Matthew Weigel [EMAIL PROTECTED] wrote:
Well, except that hard links are filesystem specific, you can't cross
filesystem boundaries with one.
Also, depending on design, you probably actually want a single RO
filesystem to serve as / for all diskless clients, and have smaller
me, I have attempted googling but not found much,
Any solution and I promise to submit my dmesg! - what an incentive :(
thanks in advance
poncenby
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
On 10/23/05, Sigfred Heversen [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
Please STOP the discussion about document formats in this thread.
You're taking my time complaing on the document format (pdf).
In my first post I wrote that I want feedback on the document and nothing
else
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
On 10/22/05, Darrin Chandler [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
http://bkw.lindesign.se/tmp/diskless.pdf
Please read my step-by-step tutorial and give me feedback.
I would have pulled it up and read it right away, but it's in pdf
format. Yes, I can read them, but it's
can make any HTML or other formats.
|ber und aus
/bkw
On 10/22/05, Bachman Kharazmi [EMAIL PROTECTED] wrote:
http://bkw.lindesign.se/tmp/diskless.pdf
Please read my step-by-step tutorial and give me feedback.
I really hope it will be useful to the OpenBSD community, for those
who want
On 10/23/05, Gareth Nelson [EMAIL PROTECTED] wrote:
1 - Perhaps it is better to produce the document in a standard format in order
to get feedback from the greatest number of people (not a flame, just a
suggestion). I recommend you convert it to plain ASCII when you get the
chance, should be a
on).
// Dag Sverre
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
When I pxeboot loads on my diskless workstation it sets:
mem[635K 249M a20=on]
the last option a20=on does freeze the whole system.
So I wonder if there's any way to change that option in pxeboot?
thx
/bkw
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
When I try to boot a Geode GX1 with generic kernel it freeze here:
OpenBSD/i386 PXEBOOT 1.02
booting tftp:/bsd 4807268- (and here it freeze)
I've tried bsd.rd both from the 3.7 and 3.8 dir without any luck, am
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
When I try to boot a Geode GX1 with generic kernel it freeze here:
OpenBSD/i386 PXEBOOT 1.02
booting tftp:/bsd 4807268- (and here
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
I tried a linux kernel and it did boot the kernel at least.
I might be missing something for the Geode GX1 in my GENERIC kernel?
geode gx1 is the geode sc-1100 right? I use such a computer here
with the GENERIC
tftp:/bsd 4807268- (and here it freeze)
and from here I'am out of ideas
Anyone who've had this t20s booting with a obsd kernel or has a clue
what I shall try next?
thx
/bkw
--
##
BKW - Bachman Kharazmi
bahkha AT gmail DOT com
uin: #24089491
SWEDEN
##
When I try to boot a Geode GX1 with generic kernel it freeze here:
OpenBSD/i386 PXEBOOT 1.02
booting tftp:/bsd 4807268- (and here it freeze)
I've tried bsd.rd both from the 3.7 and 3.8 dir without any luck, am I
missing any support in kernel?
/bkw
--
##
BKW - Bachman
74 matches
Mail list logo
