On Wed, 27 May 2015, Joel Rees wrote:
Currently, when I connect to the server via the usual cvs command, it
responds with an ssh256 fingerprint.
For some reason, my brain is not helping me find a way to ask the
server to give me md5 fingerprints. Is there a way?
From what I've tried, the
I wonder if sshd is ignoring UseDNS when trying host-based authentication.
The default for UseDNS is listed as 'no' in the man page but even when I
set it explicitly to 'no', sshd still seems to perform a lookup on the
incoming client.[1] Host-based authentication then fails if the lookup
On Wed, 4 Mar 2015, Stefan Sperling wrote:
On Wed, Mar 04, 2015 at 05:06:57PM +0200, Lars Nooden wrote:
The only other strange symptom is that the machine locks up hard every
week or two requiring a powercycle or hardware reset to restart. I can
find nothing in the logs anywhere near
I have an old Soekris 5501 with a wireless (WL-RT2561-ST 802.11a/b/g) PCI
card, running a recent snapshot. I have slow wireless transfer rate and
sluggishness that went from being occasional to nearly 100% of the time.
Instead of 830kB/s or so from the net, I'm getting transfer rates of
On Mon, 24 Nov 2014, trondd wrote:
On Mon, Nov 24, 2014 at 3:12 PM, trondd tro...@gmail.com wrote:
Just to clarify, these have been fresh installs of 5.6-release and
5.6-current. Both bsd.rd and bsd seem not to find the lii interface.
5.5-release behaves almost the same way, though
I've been trying to move from 5.4 to 5.6 on an old machine. Neither
5.6-release from the CD nor 5.6-current from the recent snapshots seem to
be able to use the Ethernet device. During power up, the link status
light is on, but then as the kernel loads it goes out and stays out.
What have I
On Mon, 24 Nov 2014, Lars Nooden wrote:
I've been trying to move from 5.4 to 5.6 on an old machine. Neither
5.6-release from the CD nor 5.6-current from the recent snapshots seem
to be able to use the Ethernet device. During power up, the link status
light is on, but then as the kernel
After suspend or hibernate, I lose my designated console keyboard layout
(sv) and it reverts to the default (us?) wsconsctl shows that the
encoding to still be sv,
keyboard.encoding=sv
What setting(s) am I missing to preserve the designated layout across
suspend/hibernate?
Regards,
On Thu, 23 Jan 2014, David Coppa wrote:
Maybe the following trick?
# mkdir -p /etc/apm \
printf #!/bin/sh\n/sbin/wsconsctl keyboard.encoding=sv\n
/etc/apm/resume \
chmod 0755 /etc/apm/resume
Followed by:
# /etc/rc.d/apmd restart
Thanks. That was the right direction. It also
I'm getting a lot of watchdog timeouts on re0 with the i386 snapshots.
re0 is a Traverse Viking PCI ADSL card. Is there something I need to set
or tune on my end to stop the timeouts?
Regards,
/Lars
OpenBSD 5.4-current (GENERIC) #148: Tue Nov 12 15:18:10 MST 2013
On Sun, 3 Nov 2013, Darren Tucker wrote:
[snip]
Also: it's not in 5.4 but it is in current: check out the Match keyword
for a more flexible method.
Cool. Were there any particular use cases in mind with 'exec' ?
Regards,
/Lars
On Wed, 23 Oct 2013, Jiri B wrote:
I saw the same and I'm not sure how it should exactly work. Maybe it is
only working when explicitly setup in 'Subsystem' line.
Although it is works like this, I would like to be able to override it
anyway inside a Match block.
jbelke
It seems to
On Tue, 1 Oct 2013, Christian Weisgerber wrote:
Lars Noodén lars.noo...@gmail.com wrote:
Is there a way in ssh(1) to get the identity specified by -i to take
precedence over what is already in the agent?
IdentitiesOnly, see ssh_config(5).
--
Christian naddy Weisgerber
On Thu, 20 Jun 2013, Stuart Henderson wrote:
On 2013-06-19, Lars Nooden lars.noo...@gmail.com wrote:
On Wed, 19 Jun 2013, Reyk Floeter wrote:
Anyway, you should make sure to use divert-to instead of rdr-to in
your pf.conf. rdr-to is considered to be obsolete for userland
proxies (except
On Wed, 19 Jun 2013, Reyk Floeter wrote:
Anyway, you should make sure to use divert-to instead of rdr-to in
your pf.conf. rdr-to is considered to be obsolete for userland
proxies (except for spamd).
That solved it exactly. I had not seen the change and had been trying
rdr-to instead of
Are there any big reasons not to choose ral(4) over ath(4) for a host
ap? I've been trying out three wireless cards on -current as host access
points. So far it seems that ral(4) works better, but is quite weak on
the overall range in mode 11g as compared to 11a.
One message earlier on
On Wed, 22 May 2013, Lars Nooden wrote:
[snip]
However, the remote machine is still able to use the forwarded port until
the connection is finally closed. The same syntax seems to shutdown
regular (-L) forwarded ports, just not for reverse (-R) forwarding. What
am I missing?
What I
I've got OpenSSH_6.2 from the latest snapshot and would like to cancel
remote forwarding without closing the existing session. I seem to be
missing something with the escape sequence ~CKR
If I start remote forwarding like this:
ssh -R 9000:localhost:80 192.0.43.10
The remote machine
I'm running -current and notice that ssh prefers keys that have been
loaded into ssh-agent over those that are being specified on the
command line.
If I load 'keya' into the agent,
ssh-add ~/.ssh/keya
and then try to use 'keyb',
ssh -i ~/.ssh/keyb 192.0.43.10
then 'keyb' is
I see a useful feature in OpenSSH 6.2(?) in current that is not in the
release notes for 6.2. In the man page for sshd(1) in current there is
this:
-E log_file
Append debug logs to log_file instead of the system log.
But I can't find anything about it in the release notes:
I've got a small system running 5.2-stable and the clock seems off. NTP
is making entries like this on startup:
Jan 31 10:15:31 net5501 ntpd[20060]: adjusting local clock by 93.846882s
I've looked around in the mail archives for various mailing lists and have
the impression that a proper
On Thu, 7 Feb 2013, Otto Moerbeek wrote:
On Thu, Feb 07, 2013 at 03:36:43PM +, Christian Weisgerber wrote:
Lars Nooden lars.noo...@gmail.com wrote:
I've got a small system running 5.2-stable and the clock seems off. NTP
is making entries like this on startup:
Jan 31 10
On Mon, 30 Aug 2010, Jean-Francois wrote:
I'm thinking about starting something aroung openbsd such as a layer
making it an easy enough to manage home nas server of good quality.
That capability is already there. As others mention, NFS is in base and
Samba can easily be added from ports.
On Tue, 17 Aug 2010, J.C. Roberts wrote:
... I'm trying to learn from any feedback I receive, positive or
negative...
IMHO it was well-written. Security Theatre is just a more harmful, very
expensive, corporate version of Eat-a-Bug.
/Lars
On Tue, 17 Aug 2010, Matt wrote:
Quite possibly more of a 'which software' question:
I am looking for a way to have two parties share documents securely through
an OpenBSD server.
User A can not look into directory B but is allowed in dir C, that sort of
thing. Sharing occurs through
On Sun, 8 Aug 2010, Jozsi Vadkan wrote:
Did anyone manage to install, and use/test OpenBSD on the RouterBoard
450G? Or does anyone has a howto for it, how to do it?
IIRC back in March, Mark Kettennis added support for the RouterBoard 600A.
However, that's a different processor. The 1000 and
On Sat, 14 Aug 2010, open...@e-solutions.re wrote:
i used ftpd (-4Dln) for users to upload ...
You may wish to reconsider that and use sshd's built in chroot with sftp.
Easier to set up and use. A lot of people 'ask' for FTP by name meaning
a generic way to up load. Even lame clients like
LeviaComm Networks NOC wrote:
In the mean time, if anyone can send me dmesgs detailing the hardware
they are form, I can start setting some of it up.
Mark Kettenis and Dariusz have a port on the RB600A:
http://old.nabble.com/RouterBOARD-RB600A-support-td27828265.html
/Lars
Chris Smith wrote:
Thanks for any input on these or other suggestions for quick (new Atom
or better) low power network appliance type gear for keeping
-current..
Finding out if -current runs on the RB450G, RB493, or RB493AH has made it
onto my todo list, but not near the top. They meet that
On Fri, 4 Jun 2010, Jan Stary wrote:
'rm -rf /usr/obj/*' is not your arbitrary choice,
it's a documented step when building the system.
http://www.openbsd.org/faq/faq5.html#BldUserland
Also documented there is keeping /usr/obj/ in its own partition and using
'newfs' to zap everything more
On Mon, 10 May 2010, Chris Smith wrote:
What about logging in this case? Can PF logs be sent to another system
running a syslog daemon?
You answered your own question. ;) Look at the 'action' field explanation
in the manual page for syslog.conf(5)
About the diskless machine, many of the
On Tue, 11 May 2010, BARDOU Pierre wrote:
... I don't think they come from PF BTW, it should be
logging/relayd/OpenVPN which makes the box lag.
Verify before you flush money. Tools like iostat, vmstat and pftop might
help show where the load is. Does the load you have from OpenVPN suggest
On Tue, 11 May 2010, Chris Smith wrote:
...http://www.openbsd.org/faq/pf/logging.html but the PF logs first have
to be written locally to a the pflog file.
Or you can pipe to logger(1) directly or go via a FIFO
/Lars
On Wed, 5 May 2010, Geoff wrote:
There's a paper from Berkeley showing how a threaded program can
never be fully debugged and should be presumed to be broken,
probably fatally broken.
Geoff, can you post the URL or any details that might help finding and
retrieving that particular article or
On Wed, 5 May 2010, Tony Abernethy wrote:
http://www.eecs.berkeley.edu/Pubs/TechRpts/2006/EECS-2006-1.pdf
first choice googling: threads berkeley
Thanks. You have better luck with Google than I did. berkeley threading
won't find it. Repeating once more for the archive:
On 05/05/2010 10:08 PM, Christiano F. Haesbaert wrote:
Sorry for such an out of topic thread, hear my pain:
I'm really sick of hearing about UML/RUP and all this boulshit about
software engineering in my university.
User Mode Linux works ok, you should probably try asking over on one of
the
On Mon, 3 May 2010, Dexter Tomisson wrote:
ab -n 1 -c 10 127.0.0.1/1.tar.gz
Apache 1.3.29
Requests per second:149.23 [#/sec] (mean)
Apache 2.2.2
Requests per second:375.02 [#/sec] (mean)
Apache2 is significantly more complex:
ktrace -f /tmp/a2-ktrace.log -di
On Thu, 29 Apr 2010, Leonardo Carneiro - Veltrac wrote:
Tks. This info is very important to me 'cause my disk sucks,
Look at the manual page for mount_mfs(8) and the option -P you can
load a directory and the files in it into memory.
and i'll have to create some tables that will be hitted
On 04/24/2010 10:27 PM, Ed Ahlsen-Girard wrote:
Ha. You laugh.
at you, not with you
My employer is blocking the msdn blogs that we need to
troubleshoot SharePoint and SQL. ...
Take the hint and get rid of both. Their presence fucks up the net.
/Lars
On Fri, 23 Apr 2010, Firstname Lastname wrote:
If you make other use of the tun interface via ssh -w at work, do some
homework or you'll get burned.
Could you elaborate on the particular mistakes you have in mind?
/Lars
Fuck off, Jussi. Serious problems like the one that fellow's network
administrator pinged him for should not sit unsolved. It affects the
rest of us. Those problem stepchild packages are problems in and of
themselves, as is the platform it runs on. The time to condone sloppy
practices and
On 04/24/2010 05:14 PM, Danny wrote:
My apologies then. It is just a screenshot of our IT {sic} guys
classifying OpenBSD as a Hacking website.
Of course it is:
http://catb.org/~esr/jargon/html/H/hacker.html
If you want to get him wound up, point out that it is one of several
that
On 4/22/10 2:44 PM, Owain Ainsworth wrote:
On Thu, Apr 22, 2010 at 01:40:42PM +0200, Claudio Jeker wrote:
In the end all that matters is that someone gets up from his comfy couch,
hacks something up and sends a diff around and the only way that is going
to happen is because of egoistical
On 04/19/2010 09:12 PM, Leonardo Carneiro - Veltrac wrote:
... the gateway features does not work 100% yet (at least in the server that i
use)
There are additional solutions. One is to work with the contacts to get
them set up with XMPP clients, since the gateway function is there only
On Tue, 20 Apr 2010, J.C. Roberts wrote:
The developers *CONSTANTLY* *ASK* *FOR* *YOUR* *HELP* with testing, ...
Since validity is critical, if you cannot test properly and hopefully
help in the debugging, then you'll never be any good at writing code...
That's a very clean way of getting
On 04/19/2010 07:18 PM, Paul Irofti wrote:
See first post for all videos:
http://undeadly.org/cgi?action=articlesid=20100322204337
The short answer is that there are no videos online.
How to go about getting the originals from the camera?
/Lars
On 04/19/2010 08:43 PM, Leonardo Carneiro - Veltrac wrote:
Hi everyone. I'm trying to get some control of the MSN protocol in my
network.
Upgrade to XMPP (jabber).
http://xmpp.org/about/
If you need client software, pidgin is one option available in ports
On 04/19/2010 09:12 PM, Leonardo Carneiro - Veltrac wrote:
... I already have a XMPP server on my network, and it
replaces MSN in almost every task, but the gateway features does not
work 100% yet (at least in the server that i use)...
Which features and which server?
/Lars
On Sat, 10 Apr 2010, Jozsi Vadkan wrote:
Can someone [same subnet, e.g.: with a hub, not switch..] sniff my skype
password when i'm using Skype? Is it encrypted?
After looking into the question of Skype's source code, as has been
recommended ;) , you may want to look at regular SIP packages:
On Tue, 6 Apr 2010, Antti Harri wrote:
OK. How do I reliably get month and year out of the file?
awk will work for that and for massaging archived logs. That's also the
kind of task perl is best at.
Another option is to reconfigure the log file format. The regular Apache
format
On 4/7/10 12:06 PM, Will wrote:
I know some OSes have a right way to install perl modules from CPAN.
Does OpenBSD have some similar methodology?
Check first in ports for packages, P5-*
http://www.openbsd.org/4.6_packages/i386.html
If it's not there, you can make your own package:
On 4/7/10 2:42 PM, Chris Bennett wrote:
More serious question about ports. What about needing a newer version of
a perl module than is in packages?
The first step would be to move to -current, because -stable must keep
the versions it is published with, and check the ports@ list.
... I
On Tue, 6 Apr 2010, Salvador Fandino wrote:
The procedure I have described shows how to *install* OpenBSD booting from a
RAM disk (bsd.rd) placed in a Linux partition. Basically it removes the need
to create a booting floppy or to burn a CD in order to install OpenBSD.
It documents how to do
I am interested in how these things work internally in your project,
and I also wondered whether I'd done something wrong (eg. inadvertantly
fetched stale code), as, at first, I assumed that all these builds
should occur in sync. Now, when I was reporting problems, the large
difference in serial
On 04/01/2010 03:09 PM, Marcus M|lb|sch wrote:
1) Is there any problem with that setup?
No, not if you do not deploy it.
Yes, if you deploy it, it may implement port-knocking.
http://marc.info/?l=openbsd-miscw=4r=1s=port-knocking
/Lars
On 04/01/2010 03:09 PM, Marcus M|lb|sch wrote:
Thanks for any pointers,
You may instead be interested in exploring authpf + use of one time
passwords. Look around for donkey, s/key, opie, yubikey to get ideas.
On Tue, 30 Mar 2010, Marco Peereboom wrote:
Drawing shit with the mouse. Not typing stuff with the keybored.
Scribus, Dia, OOo and others allow plugins or Python scripting. It
might be feasible to slave input devices to a remote application.
I wonder about using X11. It's possible to have
On 03/30/2010 11:45 PM, Mark Rolen wrote:
It looks like EtherPad will be gone after tomorrow, too. Google is killing
it and moving the functionality into Google Wave:
http://etherpad.com/ep/blog/posts/google-acquires-appjet
Piratpartiet hosts a service now that Google has dropped Etherpad:
On 3/24/10 21:02 , Pau wrote:
I was also wondering whether it is possible to have openbsd on the
laptop as the only OS. I am guessing that the EFI could give trouble.
I've done that with the older macbook pros. I'm sure the openfirmware
could be set to boot straight into OpenBSD, but would
On Tue, 16 Mar 2010, Cameron Simpson wrote:
...I'm considering is booting off the i386 CD1 and then
using the CD2 disc for the install data. Will that work, or will the
i386 install still load up some inappropriate i386 items (eg the boot
sector)?
If the network, usb or other media work in the
On 2010-3-15 11:47 AM, Ludo Smissaert wrote:
... Now I can still use it, longer than 30 minutes. To use it really
on my lap, is impossible, both my lap and the top will burn ;)
The ln2 reservoir may be empty. Those dry out quickly even when the
machine is not in use.
Seriously, do you find a
On 2010-3-11 6:59 PM, inet_use...@samerica.com wrote:
My idea is to have a script that periodically fetches the mail for all
users,
For that, one option is fetchmail:
http://www.openbsd.org/4.6_packages/i386/fetchmail-6.3.9.tgz-long.html
/Lars
On 2010-3-8 8:48 PM, Bryan Irvine wrote:
'su -' should.
I'm used to 'su -' also, but noticed that the dash has been depreciated
in favor of '-l' for simulating a full login.
/Lars
On 2010-3-7 4:21 AM, Devin Ceartas wrote:
I run openBSD 4.6 on intel mac minis as production web and email
servers. Works great. Nothing special about the install unless you want
to keep a mac partion. Put in the i386 disk, reboot. May have hold down
c, I forget.
The AMD64 CD would give the
On 2010-3-7 12:36 AM, John Hope wrote:
Does any clear step by step documentation exist for installing OpenBSD
on a Mac Mini? ...
One way, not necessarily the best way, if you want dualboot, is
* boot the OS X installation disk.
* Partition the disk, leaving a FAT32 partition for OpenBSD.
What is the appropriate way to have bsd.rd (current) use only the serial
interface for loongson?
The current FAQ 7 does not outline the extra steps needed beyond
changing /etc/ttys
/Lars
On Sat, 6 Mar 2010, Otto Moerbeek wrote:
The steps are outlined in INSTALL.loongson. You'll need to set some
pmon variables.
Yes, I have that working the way you do, booting off of wd0a. There are
the PMON characteristics outlined in INSTALL.loongson. The serial seems
needed for catching
On 2010-3-5 7:24 PM, Marc Espie wrote:
Well, sometimes we fuck up -current.
Not on purpose, but it happens.
If you run into a broken snapshot, you may have to wait a few days until
a new snapshot hits the mirrors, usually with everything fixed.
... and so, your system may be fucked for
On 2010-3-4 12:22 AM, Ilya Ilembitov wrote:
...Second problem is that I live in a dorn, so I only have access to
wireless connection, not wired. And I want to install OpenBSD to a
laptop that is currently running Debian Linux.
What you are trying to do turns out to be so easy that there's no
On 2010-3-4 6:44 PM, nixlists wrote:
Anyway, I am still not clear where ...
'stable' refers to the APIs and ABIs. It also refers to the selection
of packages and libraries and their versions.
/Lars
On 2010-3-5 2:47 AM, Nick Holland wrote:
Think about this a bit. These people DELIBERATELY put a feature in
their firmware to STOP me (and a lot of other people) from using this
card. Legit user, but they felt that I was entitled to help them
debug their shit for no more than sixty days.
On Thu, 25 Feb 2010, Otto Moerbeek wrote:
The smfb(4) framebufer just does not support more than one screen.
On Thu, 25 Feb 2010, Peter Hessler wrote:
We don't provide multiple terminals for the loongson platform. You
can use tmux, or start X instead.
Thanks Otto and Peter. It has been a
The 22 Feb snapshot for loongson defaults to only one text console.
Changing /etc/ttys to add extra terminals does not seem to have any effect:
console /usr/libexec/getty std.9600 vt220 off secure
ttyC0 /usr/libexec/getty std.9600 vt220 on secure
ttyC1
DHCPd on current serves up leases with no default route. It's been like
that for a long while now and I've not been able to find anything about
a solution.
I notice in particular when connecting with clients from the various
debian-based distros' install CDs. Old CDs (e.g. Ubuntu 5.10, 8.10)
Ted Walther wrote:
I'd like a configuration to give skype traffic ...
SIP and H.323 are the two open protocols for VoIP. Ports has pjsua and
Ekiga.
http://www.pjsip.org/pjsua.htm
http://ekiga.org/
There are many others and they can be used to call any other SIP-phone
(or H.323
Otto Moerbeek wrote:
On Thu, Feb 18, 2010 at 09:44:17PM +0200, Lars Nooden wrote:
On Thu, 18 Feb 2010, Otto Moerbeek wrote:
Retry with boot -k tftp://..., as suggested by the error message.
Also PMON sometimes gets confused, and a power cycle is needed (using the
reset button is not enough
Installing current on a Yeeloong went rather smoothly. Fuloong 2F6004 is
giving a bit more trouble and bsd.rd seems not to be able to identify the
system type. What is needed to boot bsd.rd (with serial interface) on the
FuLoong?
Below is from the 17 feb snapshot.
/Lars
On Thu, 18 Feb 2010, Otto Moerbeek wrote:
Retry with boot -k tftp://..., as suggested by the error message.
Also PMON sometimes gets confused, and a power cycle is needed (using the
reset button is not enough in all cases).
Thanks. I had misinterpreted the message and put the -k as an
L. V. Lammert wrote:
... no way I'd saddle some of these
guys with vi, much less setting the cron time parameters correctly.
Then you are far, far better off not letting them anywhere near the
server room if they are that unqualified.
Give them some time to learn and a training server, but
Per-Olov SjC6holm wrote:
How do you use authpf from a IPhone or similar...
Probably Fugu or Cyberduck or, if you can get a shell, plain openssh, as
Fugu is a UI for the client.
http://rsug.itd.umich.edu/software/fugu/
http://cyberduck.ch/
/Lars
Per-Olov Sjvholm wrote:
On 16 feb 2010, at 11.11, Lars Nooden wrote:
http://rsug.itd.umich.edu/software/fugu/
Noop. Can't see that these will work and all phones and computers
seamlessly with ease of use for the users.
You appear to have asked about clients for the iphone, not all
Per-Olov Sjvholm wrote:
...Or did miss something here?
You missed quite a lot. I would recommend looking up the following
before aggravating a larger public:
client - server architecture
client application
server (daemon)
rss
ssh
http, https
Aaron Stellman wrote:
Nobody sane will give you a copy of copyrighted material,
especially on a public mailing list. This matter shouldn't even be
discussed here.
Here, Aaron, download some copyrighted material all you want regardless
of the sanity of these fellows:
Corey wrote:
And if he is not
responding to your personal emails, it is unlikely that posting on this
list is going to help any further.
Try going through his publisher.
/Lars
J.C. Roberts wrote:
I'm curious if the processor bugs were with the Loongson 2E or 2F ?
For notes, I've already started the process of trying to contact Lemote
to see about *ahem* availability of their products, but I won't make any
promises my wallet can't keep (Sorry Kurt).
Can you post
Jacob Yocom-Piatt wrote:
there is a website protected by pf and running apache on a recent
openbsd snapshot that needs to be protected against scripting attacks.
i can configure both pf and apache to help block this behavior but am
not familiar with the best practices for such configurations.
Ingo Schwarze wrote:
David Coppa wrote on Tue, Feb 02, 2010 at 04:19:07PM +0100:
Maybe this can be an idea:
http://xyne.archlinux.ca/manpages/cronwhip
Citing from that page:
:: DESCRIPTION
:: Cronwhip runs cronjobs that would have been run in the time since the
:: last system
I've been trying a method to use CVS with SSH using a middle machine as
a stepping stone to cvs.eu.openbsd.org.
4.6 - current - cvs.eu.openbsd.org
For regular ssh this works ok to other machines. CVS doesn't seem to
like it. The symptom is the message:
can't create
Steve Shockley wrote:
On 1/31/2010 5:58 AM, James Stocks wrote:
it doesn't presently have enough disk space to store a complete
source tree.
If there is a free usb port, an external device can be plugged in their
and /usr (or specific sub-directories) mounted from that while you build
a
Ingo Schwarze wrote:
Kevin Kadow wrote on Tue, Jan 26, 2010 at 04:40:13PM -0600:
and also like his suggestion to check 'apm' and not launch
housekeeping tasks when solely on battery power.
I fear that's not an option. The apm(8) utility uses the apm(4)
device which is limited to i386,
Nick Holland wrote:
look around in that file, you should have no problem finding it.
you will learn more following that process than me giving you the
answer. :)
Good point.
Grepping the output from 'strings' for large hexadecimal numbers finds
the hash.
strings /bsd.rd | egrep
Jean-FranC'ois SIMON wrote:
Is this normal way or do I miss something ?
For ftp the normal way is to work with the chrooted ftp daemon that is
part of the OpenBSD base:
http://www.openbsd.org/faq/faq10.html#AnonFTP
http://www.openbsd.org/cgi-bin/man.cgi?query=ftpd
/Lars
I'm getting a lot of timeouts using ssh as a socks proxy between 4.6
(ssh) and current (sshd). This is an example of the messages:
channel 20: open failed: connect failed: Connection timed out
channel 8: open failed: connect failed: Connection timed out
channel 13: open
I used to run into problems on old equipment (old in 1997 already) running
the daily and weekly scripts early in the morning around the time I was
arriving at work.
find and conditional execution are one method available of checking the
age of the database.
#!/bin/ksh
Can anyone point to an article comparing the protocols SFTP and FTPS
that meets all four of the following criteria?
a. is well-written
b. contains accurate information
c. contains uptodate information, not ten years out of date
d. is authoritative
I don't like the color of your mascott, will refork into
ReJigglyPuffBSD, with a red one.
Dislike your choice of default mutt schemes; will rerefork
into HotDogStandBSD.
TrollBSD. Forked with a sed one-liner, released via another one that
turns all available desktop themes into grey and
pierre-andre.cheval...@zas.admin.ch wrote:
...address of factory or store OpenBSD to built computer, hardware
and software...
Try contacting some of the francophones on this list:
http://www.openbsd.org/support.html
Regards
/Lars
Thanks Robert and Peter.
Robert wrote:
You probalby are using an uplink with a MTU lower than 1500.
Peter wrote:
match in all scrub (no-df max-mss 1440)
the problem went away. tcpdump output of successful and failing
connetions would be instructive, along with the actual error
Ted wrote:
Now I know I can do a Match pattern on User with PasswordAuthentication.
You can also Match a group which will be useful if you wish to disable
password authentication for more than one user now or to leave the
option open in the future.
/Lars
patrick keshishian wrote:
On Wed, Dec 30, 2009 at 12:54 AM, Alexander Hall ha...@openbsd.org wrote:
Lars Nooden wrote:
I don't need it currently.
I did get good benefits out of it with some embedded devices I used to
need frequently. It made start up noticeably faster on a pair of
net4801
1 - 100 of 172 matches
Mail list logo
