On 23/12/05 07:12 am, Martijn Brouwer wrote:
> opensync.org is down :( Do you know in which language opensync will be
> written?
C/C++
The website works at the moment.
Hub
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through
Martijn Brouwer wrote:
> The info on the site does not seem to be
> very up-to-date.
> How active is the development of multisync?
Hi Martijn,
The development of multisync has been stopped - as I understand it.
But don't panic ;)
The developers are working hard on getting OpenSync running.
Open
Hi Florian,
On Fri, 2005-12-23 at 12:37 +0100, Florian Streibelt wrote:
> The development of multisync has been stopped - as I understand it.
> But don't panic ;)
>
> The developers are working hard on getting OpenSync running.
> OpenSync is a complete rewrite of multisync and its plugins.
opens
I want to buy a new cellular phone that can synchronise its agenda with
evolution using multisync, wired and preferably also unwired.
I have the impression that syncml is quite generally used in modern
telephones, is this correct? Is it used for both wired and wireless
communication with the pc, or
Hi
I have a Sony Ericsson K50i cell phone supports SyncML says SonyEricsson.
Can I sync my cell phone over USB with SyncML in Linux?
Falk Sticken
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?
Can anyone please report on
the status of the syncml plugin for opensync?
Thanks
Jim
--
Jim Maas
jamaas at btinternet dot com
Hi All,
I've been out of the loop for a while busy with work (the stuff that
pays the bills...).
So I haven't had time to look at syncing my Nokia phone lately. Last
time I tried to use the SyncML plugin, I wasn't very successful.
Has support improved? I think the other side was an issue
Back to haunt you! Again I'm still trying to connect a motorola A925 to Ximian Evolution 2.2 by multisync. Some of this does not make sense to me so please pass on basic instructions.
If I follow the instructions and set the syncml plugin, on the computer to
syncml server, it will not let me
Hello,
I am testing multisync with my Oracle Sync Server (contained in our new
Oracle Collaboration Suite) and my iPAQ running familiar/Opie. Syncing
the events only succeeds, until it comes to the end of the process.
Although multisync has transferred all events to my iPAQ the job won't
end an
I am trying to sync two Evolutions via the Internet. I have set up a
SyncML server on my host computer as the first plugin, and Evolution as
the second plug in. This is Evolution 1.4.6 (One of these days, I will
upgrade and get 2). This one is populated. On my remote computer, I have
set up a SyncM
Evening,
I am at the moment trying to bind two evolutions together. The idea is
to have 1 computer run multisync with an syncML server/evo2 pair and the
other computer running a syncML client/evo2 pair.
Creating a new appointment in either evolution and then pressing sync in
either multisync work
Hello!
After a long and painful dealings with SE Support (their US support
sucks) I've dumped my dead Z600, and have yet another obscure phone to
try to beat into shape with Multisync.
The phone is a Motorola E680. While this phone is indeed linux based,
using the QT "Qtopia Phone Edition" as it
Hi,
I don't know which plugin is responsible for that error, but I see the
following:
If I create (or had initial) a contact with a birthday on my phone, that
birthday is on the 01.01.1000 in the contact-details in Evolution.
But: If I change the birthday in evolution (to the same or something
Hi,
iam trying to get a Syncml connect (via a internetconnection) between my
Motorola v80 and multisync. The Phone just reports "Server not
respondig" and obviously no data is synchronized.
Any ideas?
This is the multisync debugoutput:
SyncML: Client connected from 80.226.233.68.
SyncML: We got
Hi,
I have checkout the latest cvs version of multisync (branch 08x), and
wbxml2 today. Installation and setup was OK.
I can connect to the SyncML plugin and my Nokia 6600 and it seems
synchronizing pefectly, but not really because its working only one way.
Actually if I made some changes on th
Hi,
I tried to sync Ericsson T39 with Evolution using SyncML plugin (in
server mode) running in Multisync. The synchronisation in phone (SyncML
client) started, then it is broken. There is no sign of communication on
server.
I have a few questions:
1. How to enter URL address of SyncML server in t
Hello,
I downloaded and installed MultiSync, the evolution plugin and the SyncML
plugin in order to synchronize my events and my contacts from Evolution with a
SyncML server.
But, what is the configuration of the SyncML plug-in for the connection to
the server ?
More precisely, if I wish to co
Hi,
I've successufully used multisync witm my t610 over bluetooth to sync
with evolution and to backup data.
I understood I can do the same over the Internet using syncml. Is that
right?
I guess I need some help to actually do it... please
When I try with synchronization-> remote sync-> start
w
Hi,
has anyone used the SyncML-Plugin as client with something other than
itself as server?
I've synced my 6600 to debitel.de "Mein BÃro" and would also sync
Evolution to this account with multisync. But this does not work.
Does anyone knows a serverimplementation, which is to be known to work
On Mon, 2004-08-02 at 12:33, [EMAIL PROTECTED] wrote:
> Hi,
>
> On Sun, Aug 01, 2004 at 11:07:25PM +0200, Armin Bauer wrote:
> > On Sun, 2004-08-01 at 22:11, Matthias Rieber wrote:
> > > Hello,
> > >
>
> [...]
>
> > synchronization program there and sniff the packets so you can see the
> > diff
Hi,
On Sun, Aug 01, 2004 at 11:07:25PM +0200, Armin Bauer wrote:
> On Sun, 2004-08-01 at 22:11, Matthias Rieber wrote:
> > Hello,
> >
[...]
> synchronization program there and sniff the packets so you can see the
> difference. If it works there it should be possible to support it on our
> favor
On Sun, 2004-08-01 at 22:11, Matthias Rieber wrote:
> Hello,
>
> I tried to use the Siemens SX1 with SyncML/multisync. Here are my
> results:
>
> 1) I tried to use the pppd/bluetooth connection -> not packet reached my computer
> 2) I tried the O2 WAP APN and selected Bearer: WAP -> no packet rea
Hello,
I tried to use the Siemens SX1 with SyncML/multisync. Here are my
results:
1) I tried to use the pppd/bluetooth connection -> not packet reached my computer
2) I tried the O2 WAP APN and selected Bearer: WAP -> no packet reached my computer
3) I tried the O2 Internet APN and selected Beare
The source for the SyncML plugin is in CVS at
multisync/plugins/syncml_plugin. There is some documentation for the
plugin API in CVS at multsync/doc/plugin-API.c. Use branch_08X.
You can also ask questions on the -devel mailing list.
If you would like more information let us know.
Tom
On Sun,
David Eriksson wrote:
On Thu, 2004-06-10 at 21:34, S2 wrote:
hello all,
justa a simple question: is it possible to use the syncML plugin over
irda instead of http?
If you make a TCP connection over IrDA (with pppd for example) you can
use HTTP on top of that.
I can not make a TCP connection to my
On Thu, 2004-06-10 at 21:34, S2 wrote:
> hello all,
> justa a simple question: is it possible to use the syncML plugin over
> irda instead of http?
If you make a TCP connection over IrDA (with pppd for example) you can
use HTTP on top of that.
--
Regards,
-\- David Eriksson -/-
hello all,
justa a simple question: is it possible to use the syncML plugin over
irda instead of http?
thank you,
S2
---
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the
On Fri, 21 May 2004, Andrew Pounce wrote:
>
> Correct - I have a SymncML <-> Backup pair setup to listen on 5079 but
> it doesn't seem to like opening/keeping the socket open.
>
Can you check at idle (before you try and sync) to see what netstat has to
say? I want to know if the port never open
So you have the SyncML plugin in MultiSync configured to be a server on
port 5079 and you don't see it listening to the port using netstat?
I just created a SyncML <-> Backup pair, and then while MultiSync is still
running:
$ netstat -a | grep 5079
tcp0 0 *:5079 *
Typical, I attempt to include the relevant info but still forget something - I
attempted to connect to the socket with telnet etc and checked using netstat for a
listening socket but didn't see anything on the port that multisync is supposed to be
using.
Using netcat to listen on the same port
Well, CVS HEAD is a bad idea - go for branch_08X, but I don't think you
are going to find anything there that will help.
I can't see how the debug is showing you that MultiSync is not opening a
socket to listen on. It looks more like it cannot connect to your phone.
Are you sure that connectivity
I've been having a bit of a play with my new P900 and attempting to get it syncing
with multisync,now that I have finally got it connected properly I have discovered
that multisync doesnt appear able to open a listening port for the syncml connections.
having run multisync with MULTISYNC_DEBUG
Hi,
I think this is connected with STRTBL support in libwxbml2. When I use
it (it's the default) sometimes 0-bytes get into the xml document and
since multisync uses wbxml_buffer as a C-string it will see only a
truncated message.
Thomas
Am Fr, den 30.04.2004 schrieb Tom Foottit um 22:58:
> Than
Thanks very much for the information.
Bo (the SyncML plugin author) isn't around right now, and I am a bit
overloaded, but we are interested in getting this working. Hopefully we
can get back to you shortly about getting this sorted out.
Thanks again,
Tom
On Tue, 2004-04-27 at 11:30, N Custer
Tom Foottit wrote:
What are you trying to sync when you do this?
Tom
Hi Tom,
I had the same problems when I tried out some local SyncML server. My
post has been on this list a while ago, though. The SyncML server I used
is from Synthesis, a swicht company that specialized itself in SyncML
tech
just on another note when using xml vs. wbxml, this is
what he reported:
-- begin msg -
Secondly, when I switch my debug client to use XML,
multisync.log shows proper login communication, but
then refuses login.
I even found out why: Multisync accepts my SyncML 1.1
request, but appa
the client (for palm or pocket pc, i'm using the
latter) is at: http://www.synthesis.ch/support_e.php
i misspoke however, they aren't opensourcing the
client to the best of my knowledge (i got them
confused w/ funambol), but they do offer a 30 day
trial and their support person i'm working with
Is this client available somewhere for us to test and reproduce with? We
haven't had much luck with WBXML syncing with other devices, so I don't
doubt that there is a problem in there somewhere.
Tom
On Mon, 2004-04-26 at 12:51, N Custer wrote:
> i am currently working w/ a support person from a
What are you trying to sync when you do this?
Tom
On Mon, 2004-04-26 at 14:13, Andreas Ritter wrote:
> When I start multisync on the command line, I can see the error:
>
> Entity: line 2: parser error : XML declaration allowed only at the start
> of the document
> xmlns='SYNCML:SYNCML1.1'>
>
When I start multisync on the command line, I can see the error:
Entity: line 2: parser error : XML declaration allowed only at the start
of the document
^
I tried it with v0.81 and v0.82.
What can I do?
Thanks for help!
Andreas Ritter
i am currently working w/ a support person from a
company w/ a syncml client (that is about to go open
source if it isn't already) and trying to get the
client to work w/ the syncml plugin. here is what he
has reported (slightly edited) when using multisync
0.82 and wbxmllib .90:
-- begin pa
Trying to remotely sync a SonyEricsson Z600 using SyncML fails.
(Multisync 0.82-1 release version)
The connection gets established, a few bytes are transferred, but then
the following error is logged:
---
SyncML: Got data of type ap
Hello!
I recently got a Z600 (Basically a T610 + better screen in a clamshell
design) and I would like to sync it with my evolution setup.
I d/l'd and compiled 0.81 with syncml (with WBXML support), and setup an
Evolution to backup conduit and it worked just fine, so I setup a SyncML
to Evolution
Hi Jeremy,
well, actually I couldn´t get the SyncML plugin in 0.81 to work at all.
It always stops with some obscure error msg about faulty xml documents,
that it has encountered.
What error msg are you receiving?
Regards,
Stephan
Jeremy O'Leary wrote:
Hi All,
Has anyone managed to use SyncML
Hi All,
Has anyone managed to use SyncML w/Horde via MultiSync?
thanks,
Jeremy
--
---
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. Febr
Hello!
I've got the travel bug real bad. I need to hit the road, but I also need
to stay connected with my online business. I decided the best way to stay
connected would be to take with me a tri-mode PDA/cell phone combo and a
Knoppix (bootable Linux) disc with a USB memory key. Between the ha
All,
I am trying to syncronize between two linux evolution instances with
syncml. I cannot get the databases to sync. Multisync is creating
doubles and triples.
The source system is stable.
How can the tarket system be 'cleaned' so it will appear unmodified.
What is the usage of the "localevo
All,
I am trying to configure syncml and have a few questions on the
configuration, in the options section.
What goes in the server name field? an ip address? which one?, 'local'
or 'remote'? Can it be a host name? If so can it be an alias?
What goes in the path section? The remote path? If so
Hmm, interesting... Using version loaded from CVS this morinig I get
this conversation and then the phone fails with KERN-EXEC 3
SyncML: Get changes, mode 0
Waiting for change...
SyncML: Client connected from 213.161.45.112.
SyncML: We got some request data.
SyncML: Line: POST /syncml HTTP/1.1
Hi again!
I've now fixed two things:
1) The SyncML plugin will return the session id as a HTTP variable
instead of a cookie
2) Added "VerDTD" in the device info.
These were the two problems I could see from your output. Fetch a CVS
snapshot (in an hour) and try again!
/Bo
> Here is the conversa
On Thu, 2003-11-06 at 18:20, Bo Lincoln wrote:
> > SyncML: Got data of type application/vnd.syncml+wbxml, which I cannot parse.
>
> This is the key line. You need to fetch libwbxml2-0.8.1 or later,
> compile and install. Then recompile the SyncML plugin.
>
> Please report any progress, I'd like
> SyncML: Got data of type application/vnd.syncml+wbxml, which I cannot parse.
This is the key line. You need to fetch libwbxml2-0.8.1 or later,
compile and install. Then recompile the SyncML plugin.
Please report any progress, I'd like to know how far you get with the
Nokia.
/Bo
> --
> Bo Li
I try to sync my Nokia 3650 with Evo 1.4.5 from Fedora Core 1. Multisync
is compiled from CVS. I can get a connection, but everyting fails in
eraly stages. Debug is as follows:
SyncML: Socket opened.
Calendar loading `/home/jarmo/evolution/local/Calendar/calendar.ics'...
Calendar loading `/home/j
On Fri, 2003-09-26 at 16:50, David Eriksson wrote:
> Time to look at http://wbxmllib.sourceforge.net/ then?
I'm trying to do some SyncML server stuff of my own. I've tried the
latest release. Unfortunately, it still can't handle multiple code
pages, and CDATA sections, both of which are needed fo
I must admit, I have tried the SyncML plugin, and found it difficult to
set up, and encountered some bugs too.
Why can't we just get the RemotePlugin working again? It was very
simple to use, and didn't have any serious bugs (that I remember).
-Lee
On Fri, 2003-09-26 at 08:28, Bo Lincoln wrote:
> > > I can sync my laptop and desktop I'll try my nokia phone.
> >
> > Unfortunately, Multisync won't work with the 9290 (at least for now)
> > because Multisync does not support WBXML yet. AFAIK, the only phone
> > that's not using WBXML is the Ericsson P800, which uses XML (hey guys,
> > know a
Quoting Hitokiri Batousai <[EMAIL PROTECTED]>:
> On Fri, 2003-09-26 at 07:33, Dr. Francisco J. Vaca wrote:
> > Now that syncml is supported. I am trying to connect my nokia 9290
> > communicator via syncml. However I am having a very hard time setting up
> > the server side multisync plugin in m
On Fri, 2003-09-26 at 07:33, Dr. Francisco J. Vaca wrote:
> Now that syncml is supported. I am trying to connect my nokia 9290
> communicator via syncml. However I am having a very hard time setting up
> the server side multisync plugin in my RedHat 9 Linux box. Can anyone give
> me an actual ex
Hi.
Now that syncml is supported. I am trying to connect my nokia 9290
communicator via syncml. However I am having a very hard time setting up
the server side multisync plugin in my RedHat 9 Linux box. Can anyone give
me an actual example of how to configure the syncml server and client? Once
On Son, 2003-09-07 at 19:50, Bo Lincoln wrote:
> > Could it be that the sync-ml plugin still has some problems with german
> > umlauts? following is the output multisync sync-ml (acting as server)
> > gives on console when i sync two evolutions:
Ok it works now. Was somehow funny *g*
The Entry mu
> Could it be that the sync-ml plugin still has some problems with german
> umlauts? following is the output multisync sync-ml (acting as server)
> gives on console when i sync two evolutions:
>
> Entity: line 683: error: Input is not proper UTF-8, indicate encoding !
> ADR;WORK;CHARSET=UTF-8:;;Ho
Could it be that the sync-ml plugin still has some problems with german
umlauts? following is the output multisync sync-ml (acting as server)
gives on console when i sync two evolutions:
Entity: line 683: error: Input is not proper UTF-8, indicate encoding !
ADR;WORK;CHARSET=UTF-8:;;Holzgasse 34;L
On Tue, 2003-09-02 at 11:32, Jan Ypma wrote:
> I think I know what is causing this... MightyPhone keeps a database of
> "known" clients, and during an email conversation they slipped that they
> won't allow unknown clients to connect. I guess the SyncML story is
> turning into another version of th
I think I know what is causing this... MightyPhone keeps a database of
"known" clients, and during an email conversation they slipped that they
won't allow unknown clients to connect. I guess the SyncML story is
turning into another version of the "fake http User-Agent game" :-)
Is it possible to
Hello!
I've tried to make the SyncML plugin connect to MightyPhone, and I did
fix some bugs and implement one missing feature, but MP hangs up on us
as soon as it gets to know that we are "MultiSync" and not "P800" which
I claim to be. I don't know if this is the cause of the problem, but I
find i
> That's great news! I'll be anticipating any developments. btw, what
> "public" syncml services DOES the plugin sync to? I've tried the server
> over at calmeno.net, with no success. Recently I've downloaded the open
> source sync4j java server, I'll be giving it a try.
It has not been tried with
On Wed, 2003-08-27 at 23:24, Bo Lincoln wrote:
> > I sync to a service called mightyphone.com, to which my phone
> > successfully syncs using SyncML, and they seem to be "SyncML compliant".
>
> Interesting, I signed up for an account there and tried it. The SyncML
> plugin does not yet work with i
> I sync to a service called mightyphone.com, to which my phone
> successfully syncs using SyncML, and they seem to be "SyncML compliant".
Interesting, I signed up for an account there and tried it. The SyncML
plugin does not yet work with it (MP just disconnects in the middle of a
sync), but I'll
man, 18.08.2003 kl. 16.26 skrev Jan Ypma:
> Hi!
>
> I'm trying to get the syncml part of multisync working, but it fails
> kinda fast, saying in the log "Cannot connect to syncml server". Seems
> that not even the http communication is working...
>
> I sync to a service called mightyphone.com, to
Hi!
I'm trying to get the syncml part of multisync working, but it fails
kinda fast, saying in the log "Cannot connect to syncml server". Seems
that not even the http communication is working...
I sync to a service called mightyphone.com, to which my phone
successfully syncs using SyncML, and the
søn, 17.08.2003 kl. 09.09 skrev Chris:
> Hi,
>
> Just a question about the conceptand how it's supposed to work.
After you have the ppp-connection up and running between you P800 and
your Linux-box, you set up Multisync to act as a syncml-server. Then you
set up remote-sync on your P800 to yo
Hi,
Just a question about the conceptand how it's supposed to work.
Up to a point I have my P800 talking to my Linux box with
Bluetooth.but how do I send receive contacts to Evolution?
I guess it's the SyncML and P800 plugins...but I'm confused about this
SyncML server business.how
Hi,
I just have some questions regarding the SyncML plugin. What conflict
resolution policies does the SyncML plugin have? For example, I edited
the same item on both the client side and the server side of the SyncML
plugin. Which of the changes will be accepted?
Or should I post this on the deve
73 matches
Mail list logo
