Hallo,
I have some problems useing the font adventor from gyre project.
After downloading the fonts and the context map-files from the gyre-
site, I tried the following:
\usetypescriptfile[type-gyr]
\definetypeface[adventor][ss][sans][adventor][default][encoding=ec]
\setupbodyfont[adventor,ss,9pt
> Wolfgang Werners-Lucchini wrote:
> > Hallo,
> >
> > has nobody tested this with
>
> did you update?
No, I have not updated yet!
I would like to understand this error first.
Can you please explain, why a comment can toggle an error?
Filtering comments should be v
Hallo,
has nobody tested this with
ConTeXt version <= 2007.07.03 19:38 MKII?
Wolfgang
> Here is an other example!
> Remove the three-line-comment, and the error is gone!
> Strange what?
>
> Wolfgang
> -
> \setupbodyfont[sansserif,11pt]
> \setuphead[s
Hallo!
> I think I've identified the problem: in the PostScript prologue
> file for
> pstoedit you find the following bit of code (slightly simplified):
>
> /getorigfont
> {
> dup /OrigFont known
> {
> /OrigFont get getorigfont
> }
> if
>
Hallo!
> Here is a minimal example of how this happens. I had posted it
> sometime back.
>
> \starttext
> \setupitemize[each][][stopper=:]
> \bTABLE
> \bTR
> \bTD
> \startitemize[a]
> \item Bla
> \item Blub
> \item Bautz
> \stopitemize
> \eTD
> \eTR
> \eTABLE
> \stoptext
Here is an other example
Hallo!
Downgrading to gs version 8.11
does NOT help, but downgrading to 8.11 AND changing the makempy
methode from pdf to ps helps!
gs 8.57 hangs with ps too.
If an ps guru can interpret the gs error message, I will send this of
list!?
Wolfgang
> > the following code let ghostscript fail.
>
Hallo!
I have a problem with \startstopitemize
with
\setupitemize[each][][stopper=:]
After some \startitemize ... \stopitemize groups
conTeXt(ver. 2007.07.25) starts to count from zero (not longer from
one).
I get
: Bla
a: Blub
b: Bautz
not
a: Bla
b: Blub
c: Bautz
A few weeks ago someone
Hallo!
> > the following code let ghostscript fail.
> > What is wrong her?
> >
> > Wolfgang
> >
> > \setupcolors [state=start]
> > \starttext
> > \useMPlibrary[txt]
> > \startlinecorrection
> > \TightText{\ss\bf 123}{0cm}{3cm}{red}
> > \stoplinecorrection
> > \stoptext
> > %
> > %ConTeXt ver: 20
Hmm, two leading underscores in titles are not allowed?
Wolfgang
\starttext
\section{The \type{_\_problem} is}
Here the \type{__problem} is not.
\stoptext
___
If your question is of interest to others as well, please
Hallo,
the following code let ghostscript fail.
What is wrong her?
Wolfgang
\setupcolors [state=start]
\starttext
\useMPlibrary[txt]
\startlinecorrection
\TightText{\ss\bf 123}{0cm}{3cm}{red}
\stoplinecorrection
\stoptext
%
%ConTeXt ver: 2007.07.03 19:38 MKII
%pstoedit: version 3.44 / DLL i
Hallo,
I have two problems/questions with the following tables:
1. Should'nt all the columns be .2\textwidth, as in the last table?
2. Why expands column width to \textwidth in the second table?
Has to do with \type{} and/or color!
3. Why behaves table 1 (with \type{}) as table 3 (whitout \typ
Hallo!
I can not get pragma ade website any longer:
(pragma-ade.com expired on 06/28/2007 and is pending renewal or
deletion)
Is there an other place to download a current beta?
Wolfgang
___
If your question is of
Hallo!
I tryed the first wiki-example:
There are some notes \lilypond{ \relative{bes a c b} } embedded in
this line.
With version 2.11.27 the lilypond option -b eps is unknown.
With version 2.10.25 the above example is a 3-page ou
Hallo!
I need help with referencing a subsubsection-number
and the following setup:
---
\setuphead[chapter][number=no]
\setuphead[subsection][resetnumber=no]
\setuphead[subsubsection][
numbercommand={\determineheadnumber[section]\currentheadnumber .}]
\setupse
Hallo!
> >> use \par at the end of the question
> >>
> >
> > Why?
> >
> \question pick up it sargument and uses \par as delimiter, otherwise
> we could not apply attributes to the question text
>
> \question is the 'minimalistic approach,
>
> \startquestion
> \stopquestion
>
> is the
Hi Bernd!
> > what I am doing wrong with the following snipped?
> >
> > The \par in the \item does not work.
> > ---
> > \defineenumeration[question][location=top,text=Aufgabe]
> > \defineblock[question]
> >
> > \starttext
> > \chapter{Aufgaben}
Hallo,
what I am doing wrong with the following snipped?
The \par in the \item does not work.
---
\defineenumeration[question][location=top,text=Aufgabe]
\defineblock[question]
\starttext
\chapter{Aufgaben}
\beginquestion
\question
\startitemiz
Hallo!
The following simple example doesn't compile
(ConTeXt ver. 2007.01.02 and Live ConTeXt).
What am I doing wrong?
\starttext
\startbuffer
\startformula
x^2 = x\cdot x
\stopformula
\stopbuffer
\framed{\getbuffer}
\stoptext
Wolfgang
___
ntg-contex
On 2 Feb 2007 at 19:17, [EMAIL PROTECTED] wrote:
> \setupcaptions[location=high]
What about 'top'?
Wolfgang
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
On 1 Feb 2007 at 12:00, [EMAIL PROTECTED] wrote:
> John ([EMAIL PROTECTED]) gave me a good hint when he said to
> download mailing list,
> so I found
> http://www.ntg.nl/pipermail/ntg-context/2004/008068.html
> http://www.ntg.nl/pipermail/ntg-context/2004/008044.html
I found:
http://www.ntg.nl/
Hallo!
I tried some examples with m-database and Mojca's 'My Way' and had
some problems
==Example-1===
\defineseparatedlist[NaturalTable][separator=comma,%quotechar={"},
before=\bTABLE,
On 18 Jan 2007 at 15:20, [EMAIL PROTECTED] wrote:
> http://www.gust.org.pl/projects/e-foundry/latin_modern
> gets a
> Resource not found
> message. (Is there another source?)
Thats a typo at that web-site:
take 'latin-modern' not 'latin_modern'!
but there is no aktuall lm to download at the mom
> Is it on windows? It seems -- unless your tests too are on linux
Yes, it is on windows (Acrobat Reader 7.0.8 and 7.0.9)
I tried with ghostscript 8.53, and all is ok.
Don't know what with AcroRead 8.
Wolfgang
___
ntg-context mailing list
ntg-context@n
> On SCREEN viewed with Acrobat 7.0.9 on Windows XP I see different
> artefacts in the lower connection of the horizontal and rounded
> corner line:
> - spikes directed outside the frame
> - semicircular white spot
> - semcircular white spot with spikes towards the inside of the
> spot
Hallo!
> > % a lot of weird corners
> >
> > in core-rul ...
>
> Hallo!
>
> I played a little with this and found some artefacts in the arc
> with
> rulethickness=2pt or 4pt (3pt is ok).
>
> \framed[corner=14,
> frame=on,
> framecolor=darkred,
> rulethickness=2pt]{\tttf
> grep for
>
> % a lot of weird corners
>
> in core-rul ...
Hallo!
I played a little with this and found some artefacts in the arc with
rulethickness=2pt or 4pt (3pt is ok).
\framed[corner=14,
frame=on,
framecolor=darkred,
rulethickness=2pt]{\tttf TEST MORE~}
Wolfgang
> Has anyone modified the batch file in cdwincontext so that it will
> run on Windows98? If so, can I get a copy of the batch file?
Yes, I have done this in the past. But I have updated my windows and
deleted the old stuff. If nobody else has working files I can
summarize, what I have done.
Wo
Hallo!
I wrote a little booklet with
\setuppapersize[A5][A5]
and
\starttext
\completecontent\page[right]
...
\stoptext
All goes right. But if I arrange the pages with
\setuppapersize[A5][A4,landscape]
\setuparranging[2UP]
insteed, the table of content is empty!
I got in the log:
(e:\contex
Hallo!
\type{--mode} results in '-mode' (one minus eaten).
Wolfgang
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
> > Is it possible somehow to extract all the images covered in an
> image
> > database without lose of quality?
> >
> eh ... normally there should beno loss at all, pdftex just copies
> the resources
Sorry, I see my question was'nt clear enough.
Is there a way to restore all the images incl
Hallo!
Is it possible somehow to extract all the images covered in an image
database without lose of quality?
Wolfgang Werners-Lucchini
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
> Well, all user commands at least. Please also take a look at
> http://wiki.contextgarden.net/Command_Syntax/Missing
> and if you have some time, please edit this.
I will do that.
But I would like to know, how setup-xx.pdf is updated.
The commands in 'the details' are rather old.
As the other Wo
Hallo!
With ConTeXt ver. 2006.09.26, figure numbering is working as
expected.
> > >> You need the option
> > >> \setupfloats[numbering=nocheck]
is not longer needed, but
> you can see a bad sideeffects by figurenumber=nocheck in my
> example
this sideeffect is visible both, with nocheck and wi
Hallo!
I searched some of the first (p. 8-9) commands used in 'the details'
in setup-en.pdf.
But I didn't found
\showgridboxes
\setlayer
\definelayer
\layoutcolumnoffset
...
Shouldn't be ALL the commands listet in setup-en.pdf?
How is this document created?
Wolfgang
___
> This was your example (not exactly the same) you posted as your
> first example file and works now as expected.
Ahh! I should implement my own testsuit.
Wolfgang
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-c
> > What ConTeXt Version is it where
> > \checkfloatracer is defined?
> >
> > Gru?, Wolfgang
>
> Hi other Wolfgang
>
> \checkfloatracer is defined in page-flt.tex as
>
> \def\checkfloatracer#1%
> {\newnodelocation{#1}}
I asked this, because in ConTeXt 2006.09.26,
which I use, there isn't a
> \def\floatcounter[#1]%
> {\bgroup
> \checkfloatracer{\v!float#1}%
> \nextnodelocation{\v!float#1}%
> \analyzenodelocation{\v!float#1}%
> \tagnodelocation{\v!float#1}%
>\egroup}
Hallo Wolfgang!
What ConTeXt Version is it where
\checkfloatracer is defined?
Gruß, Wolfga
> > Can someone verify this error please or is there something wrong
> > with my code?
>
> The figure file is not found here as well (2006.08.08). But if I
> change it to:
>
> \startMPrun
> \input test.mp
> \stopMPrun
> \starttext
> \externalfigure[w-mprun.1][width=15mm]
> \stoptext
>
> then th
Hallo!
This tries to include test.mp recursivly until level=25
\startMPrun{testmp}
input test.mp;
\stopMPrun
bug or myfault?
Wolfgang
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
> Some beta's back, the following was working.
> --
> \startMPrun
> \input test.mp
> \stopMPrun
> \starttext
> \externalfigure[test.1][width=15mm]
> \stoptext
> --
> with
> --test.mp-
> beginfig(1)
> draw (0,0) -- (1cm,1cm);
> endfig
Hallo!
Some beta's back, the following was working.
--
\startMPrun
\input test.mp
\stopMPrun
\starttext
\externalfigure[test.1][width=15mm]
\stoptext
--
with
--test.mp-
beginfig(1)
draw (0,0) -- (1cm,1cm);
endfig;
end
--
> >ConTeXt ver: 2006.08.08 21:51 fmt: 2006.9.5 int: english mes:
> english
> >ConTeXt ver: 2006.09.07 17:50 MK II fmt: 2006.9.8 int:
> english/english
> >
> >Which ConTeXt version do you use.
> >
> >Wolfgang
> >
> >
> Did you noticed the blank line between 1.3/2.1 and 2.3/3.1 ?
Hallo Rena
> You need the option
>
> \setupfloats[numbering=nocheck]
>
> in your document settings.
>
Hallo Wolfgang!
This works.
How do you find your peaces of wisdom?
But I have not understand the whole figurenumber thing.
It is obviously (my example shows this), that there must
be a hidden number.
> a new beta:
>
> - cloned figure numbers fixed
Before this beta, the following compiled ok
but didn't use davidsnumber as figurenumber.
With the last beta I got the appended error!
number.tex
\defineenumeration[whatever]
\definenumber[davidsnumber]
\setupnumber[w
> Hi Wolfgang,
>
> use the following code because my old one worked only when
> \setupfloats[indentnext=yes] was used.
>
> \unprotect
>
> \def\OTRONEdosomepagefloat#1[#2]%
> {%\checkwaitingfloats{#1}%
>\global\setbox#1\vbox
> {\unvbox#1%
> \vbox to \textheight
> {\doifno
> The following example solves now your problem on my
> machine without the ugly solution with \indentation.
>
> \unprotect
>
> \def\OTRONEdosomepagefloat#1[#2]%
> {%\checkwaitingfloats{#1}%
>\global\setbox#1\vbox
> {\unvbox#1%
> \vbox to \textheight
> {\doifnotinset\v!hi
> The following works on my machine
>
> \setupindenting[yes,medium]
> \setupfloats[indentnext=yes]
>
> \starttext
>
> \input knuth \par
>
> \placefigure
> {}
> {\framed
> [offset=none,
> width=0.6\makeupwidth,
> height=0.4\textheight]
> {figure}}
>
>
> Use \indentation, as in:
> \indentation Now is the time.
Thank you, David! That helps too.
Wolfgang
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Hallo!
I have a problem with indenting.
The paragraph following the \placefigure
is not indented and I find not any way to achieve this.
The following testfile shows the situation:
--
\setupfloats[indentnext=yes]% <--- Doesn't help!
\set
Hallo!
Is this correct behaviour?
-
\starttext
\placefigure{}{\framed{Blub}}
\placefigure{}{\framed{Bautz}}
\placefigure{}{\framed{Bla}}
This were \rawnumber[figure] figures by now!
\setnumber[figure]{8}
We want to count on with \rawnumber[figure].
> > > Problem: 'ecrm2074 at 600', which exists, should be used!
> > > 'ecrm1200 at1036.8' is used instead!
> > >
> > > How can this be corrected?
> >
> >Is this my question too silly or too difficult to answer?
> ...
> (2) if this is a well known size, make sure that it's mentioned i
> >Hallo!
> >
> > > Problem: 'ecrm2074 at 600', which exists, should be used!
> > > 'ecrm1200 at1036.8' is used instead!
> > >
> > > How can this be corrected?
> >
> >Is this my question too silly or too difficult to answer?
>
> depends on your settings:
>
> (1) either you should c
Hallo!
> Problem: 'ecrm2074 at 600', which exists, should be used!
> 'ecrm1200 at1036.8' is used instead!
>
> How can this be corrected?
Is this my question too silly or too difficult to answer?
Wolfgang
___
ntg-context mailing list
[EM
Hallo!
After asking some questions about installing metafont's, I have not made
any progress.
I would like to show the problem with J. Knappen's EC-fonts.
To access this fonts I adapted my little typescript:
-type-kna.tex--
\starttypescript [serif] [knapp
201 - 254 of 254 matches
Mail list logo
