Hi,
On Thu, 5 May 2016, Bruno Randolf wrote:
On 05/05/16 02:02, Kathy Giori wrote:
On Wed, May 4, 2016 at 5:45 PM, Fernando Frediani wrote:
Thanks Daniel. That explains a lot.
I imagine if some digging is done it would be possible to find the holders
of the critical resources and then re-org
Hi Antonio,
Comments inline.
Antonio Quartulli wrote:
TODO: hostapd does not work yet with r8188eu
Signed-off-by: Antonio Quartulli
---
package/boot/uboot-sunxi/Makefile| 8 +++-
Can you please split this into a series, and put the packages and the
target-related changes
Vasco Steinmetz wrote:
Hi,
with the latest trunk the board.d detection script for the Lamobo Banana
Pi R1 fails again. This time the value is
cat /proc/device-tree/model
Lamobo R1
Sadliy this is the model name before my previous complaint at end of
November, when the dt reported
"Lamobo Banan
Hi Gerhard,
On Sat, 19 Dec 2015, Gerhard Bertelsmann wrote:
Hi,
I have a problem with my BananaPi rebooting with actual trunk (r47935):
[...]
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to pa
On Mon, 23 Nov 2015, Dave Taht wrote:
On Mon, Nov 23, 2015 at 11:07 AM, Zoltan HERPAI wrote:
Hannu A Nyman wrote:
Well, both gb15 and buildslave2 still fail to upload binaries, and as they
are making 9 of the 22 concurrent builds, almost half of the compiled
binaries are discarded. Sad
Hannu A Nyman wrote:
Well, both gb15 and buildslave2 still fail to upload binaries, and as
they are making 9 of the 22 concurrent builds, almost half of the
compiled binaries are discarded. Sad.
Logs from today:
http://buildbot.openwrt.org:8010/builders/x86.kvm_guest/builds/119/steps/shell_11/
Hannu Nyman wrote:
Buildbot needs some maintenance, as some of the buildslaves are
behaving badly :-(
1)
gb15 has a wrong host key and silently fails all uploads. It just
completed 4 builds successfully, but did not upload them. That has
been going on for some time now.
It is rather sad that
musl fails to build when compiled with gcc on sh3 (GCC target/#67260).
Work it around.
Signed-off-by: Zoltan HERPAI
---
toolchain/musl/common.mk |6 ++
1 file changed, 6 insertions(+)
diff --git a/toolchain/musl/common.mk b/toolchain/musl/common.mk
index 82c1543..3045c63 100644
--- a
Hi Michael,
Michael Heimpold wrote:
This patch series is to bring OpenWrt's Duckbill support back in shape:
- U-Boot build is fixed
- SD card generation is adopted for Duckbill images
I've tested my changes with I2SE Duckbill and Olimex OLinuXino
Maxi board, however, I've no Micro/Mini at hand.
Felix Fietkau wrote:
On 2015-09-16 09:27, John Crispin wrote:
Hi,
On 14/09/2015 10:38, Zoltan HERPAI wrote:
musl fails to build when compiled with gcc on sh3 (GCC target/#67260).
Work it around.
Signed-off-by: Zoltan HERPAI
---
toolchain/musl/common.mk |5 +
1 file changed
musl fails to build when compiled with gcc on sh3 (GCC target/#67260).
Work it around.
Signed-off-by: Zoltan HERPAI
---
toolchain/musl/common.mk |5 +
1 file changed, 5 insertions(+)
diff --git a/toolchain/musl/common.mk b/toolchain/musl/common.mk
index 82c1543..ba467fb 100644
--- a
Matthias Schiffer wrote:
The DTS files aren't useful (other targets don't copy them either) and
clutter BIN_DIR with files unrelated to the chosen profile.
Signed-off-by: Matthias Schiffer
[snip]
Thanks Matthias, I've committed the series in r46604-46608.
Regards,
Zoltan H
___
Hi,
Daniel Golle wrote:
Similar to brcm2708 have framebuffer video support built-in so
fbconsole gets initialized during boot.
Plus more kernel config carefully sync'ed against upstream
sunxi_defconfig.
Signed-off-by: Daniel Golle
---
target/linux/sunxi/config-4.1 | 599
Daniel Golle wrote:
Newer kernels make use of libahci in ahci-platform, ie. also on non-PCI
platforms.
As there is no single config symbol deciding whether libahci.ko is
being built or not it seems the most sensitive thing to package it in
kmod-ata-core.
Signed-off-by: Daniel Golle
---
[sni
Hi,
Daniel Golle wrote:
This package contains the WiFi NVRAM distributed with Bananian [1].
It's currently needed to use the WiFi module (BCM43362 SDIO) on the
BananaPro with the brcmfmac cfg80211 driver which doesn't yet support
retrieving calibration data via device-tree or platform_data.
(DO
On Sun, 26 Jul 2015, Zoltan HERPAI wrote:
On Fri, 24 Jul 2015, John Crispin wrote:
On 16/07/2015 22:20, Matthias Schiffer wrote:
-BOARDS:= \
- sun4i-a10-cubieboard \
- sun4i-a10-olinuxino-lime \
- sun4i-a10-pcduino \
- sun5i-a13-olinuxino \
- sun6i-a31-colombus
On Fri, 24 Jul 2015, John Crispin wrote:
On 16/07/2015 22:20, Matthias Schiffer wrote:
-BOARDS:= \
- sun4i-a10-cubieboard \
- sun4i-a10-olinuxino-lime \
- sun4i-a10-pcduino \
- sun5i-a13-olinuxino \
- sun6i-a31-colombus \
- sun6i-a31-m9 \
- sun7i-a20-ba
Harald Geyer wrote:
Zoltan HERPAI writes:
Michael Heimpold wrote:
Am Sonntag, 5. April 2015, 12:01:48 schrieb Harald Geyer:
commit 597a84e52d9eff8d4686c40cd8be4f7a9b47679d with
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45052
3c298f89-4303-0410-b956-a3cf2f4a3e73
made
Michael Heimpold wrote:
Am Sonntag, 5. April 2015, 12:01:48 schrieb Harald Geyer:
commit 597a84e52d9eff8d4686c40cd8be4f7a9b47679d with
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45052
3c298f89-4303-0410-b956-a3cf2f4a3e73
made the ext4 rootfs image unavailable for download from snapshot
On Wed, 11 Feb 2015, Luka Perkov wrote:
zoltan maintains the sunxi target. he might already have done work on
this and might have some updates or whatever that he plans to
incorporate. bumping a kernel maintained actively always has the risk
of duplicating work and / or doing superfluous work
Hi Daniel,
Daniel Golle wrote:
Partially based on patchset form Wang Yi published
on https://github.com/Lamobo/Lamobo-R1-OpenWrt as well as on Bananapi DTS.
Signed-off-by: Daniel Golle
---
I've added the missing patches in r44211-44216, with one small change in
the network script to fix t
Hi Daniel,
Comments inline:
Daniel Golle wrote:
Partially based on patchset form Wang Yi published
on https://github.com/Lamobo/Lamobo-R1-OpenWrt as well as on Bananapi DTS.
Signed-off-by: Daniel Golle
v2: swconfig needs to be built-in, switch is not detected properly otherwise
---
.../sunx
On Mon, 19 Jan 2015, Daniel Golle wrote:
Signed-off-by: Daniel Golle
---
package/boot/uboot-sunxi/uEnv.txt | 11 ++-
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/package/boot/uboot-sunxi/uEnv.txt
b/package/boot/uboot-sunxi/uEnv.txt
index e4fc0e1..e024954 100644
--- a/pa
Hi Daniel,
On Mon, 19 Jan 2015, Daniel Golle wrote:
Partially based on patchset form Wang Yi published
on https://github.com/Lamobo/Lamobo-R1-OpenWrt as well as on Bananapi DTS.
Signed-off-by: Daniel Golle
---
.../sunxi/base-files/etc/uci-defaults/02_network | 6 +
target/linux/sunxi/base
Hi Daniel,
On Mon, 19 Jan 2015, Daniel Golle wrote:
---
package/boot/uboot-sunxi/uEnv.txt | 11 ++-
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/package/boot/uboot-sunxi/uEnv.txt
b/package/boot/uboot-sunxi/uEnv.txt
index e4fc0e1..e024954 100644
--- a/package/boot/uboot-
Daniel Golle wrote:
Signed-off-by: Daniel Golle
---
package/boot/uboot-sunxi/Makefile | 6 +-
...-3e1ded1fff32d8af8cc5eec22c56797621ea6649.patch | 25006 ---
2 files changed, 4 insertions(+), 25008 deletions(-)
delete mode 100644
package/boot/uboot-sunxi/p
Jose,
On Tue, 13 Jan 2015, José Vázquez wrote:
2015-01-13 8:46 GMT+01:00, Zoltan HERPAI :
I haven't seen any flags that does SDIO_SUPPORT or something similar. It's
either removing "depend on USB_SUPPORT" or add dependencies for the
targets that'll use the SDIO p
Hi,
On Sat, 10 Jan 2015, Daniel Golle wrote:
merges DTS published on linux devicetree mailing list.
Thanks for this - didn't spot that Hans beat me with a few days on the
file. Pushed in the published patch, and will patch in the
brcmfmac-related stuff later.
Thanks,
-w-
_
Hi,
On Sat, 10 Jan 2015, Daniel Golle wrote:
At least making sure stuff compiles before committing would be nice.
Signed-off-by: Daniel Golle
---
package/boot/uboot-sunxi/patches/003-add-lemaker-bananapro.diff | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/boot/ubo
Hi,
On Sat, 10 Jan 2015, Daniel Golle wrote:
Initial support for BananaPi-R1 aka Lamobo-R1.
Based on patchset form Wang Yi published on
https://github.com/Lamobo/Lamobo-R1-OpenWrt
Thanks for submitting this. Did you have a chance to verify the switch
working? I have read various results ar
Hi,
On Sat, 10 Jan 2015, Daniel Golle wrote:
Augmented by iptables modules, if they are enabled.
oldconfig hangs and asks for them if *tables modules are not selected.
Signed-off-by: Daniel Golle
---
target/linux/generic/config-3.18 | 2 ++
1 file changed, 2 insertions(+)
diff --git a/target/
later. As of now, only sunxi
would use the SDIO support for the Ampak modules.
Signed-off-by: Zoltan HERPAI
---
Index: package/kernel/mac80211/Makefile
===
--- package/kernel/mac80211/Makefile(revision 43857)
+++ package/kernel/mac
Michael Heimpold wrote:
Remove 'series' as all other targets do not use this, too. It
should be obviously clear, that this target refer to a
whole CPU family.
Signed-off-by: Michael Heimpold
---
Hi Michael,
Applied most of the series in r43646-43651, r43657, I've put an SOB
where I could
On Mon, 8 Sep 2014, Derek Werthmuller wrote:
Looking to build BB RC3 for a few of the AllWinnerA20 processor boards, but I
don't see them as a target on make menuconfig page? Am I missing something?
Also don't see any pre-built images for BB for any of these platforms. I can
understand if
This is roughly the same as the VoCore, which seems to be more successful
as of now. (I understand that the campaign started just two days ago for
the AsiaRF.)
https://www.indiegogo.com/projects/vocore-a-coin-sized-linux-computer-with-wifi
I like both, though.
Regards,
-w-
On Fri, 30 May 201
Hi,
Michael Heimpold wrote:
While at it, make spelling at little bit more consistent,
at least for my taste :-)
Signed-off-by: Michael Heimpold
---
This is one of those "sure, why not" patches. :) Applied in r40679, thanks.
Regards,
-w-
___
op
Hi Michael,
Michael Heimpold wrote:
Signed-off-by: Michael Heimpold
---
target/linux/mxs/modules.mk | 15 +++
1 file changed, 15 insertions(+)
diff --git a/target/linux/mxs/modules.mk b/target/linux/mxs/modules.mk
index 0584a73..2db4961 100644
--- a/target/linux/mxs/modules.mk
+
Michael Heimpold wrote:
Signed-off-by: Michael Heimpold
---
.../mxs/patches-3.13/{110-dt-add-lradc.path => 110-dt-add-lradc.patch} |0
1 file changed, 0 insertions(+), 0 deletions(-)
rename target/linux/mxs/patches-3.13/{110-dt-add-lradc.path =>
110-dt-add-lradc.patch} (100%)
diff --git
Hi Nathaniel,
The AFS-related part is applied in r40587, thanks. The CIFS/NFS-related
fscache change will be added separately later.
Regards,
-w-
nwf wrote:
Take three. This time, I gave up on the dynamic support of fscache, preferring
to always have it compiled in and wired up as a depende
Added in r40585, thanks.
Regards,
-w-
Zoltan HERPAI wrote:
Hi Michael,
No objections - thanks for pinging, I'll check this.
Regards,
-w-
On Sat, 26 Apr 2014, Michael Heimpold wrote:
HI Zoltan,
do you have any objections regardings this patch?
Ciao,
Michael
Am Sonntag, 13. April
Hi Michael,
No objections - thanks for pinging, I'll check this.
Regards,
-w-
On Sat, 26 Apr 2014, Michael Heimpold wrote:
HI Zoltan,
do you have any objections regardings this patch?
Ciao,
Michael
Am Sonntag, 13. April 2014, 14:47:33 schrieb Michael Heimpold:
Duckbills feature an USB ty
I don't know if any of the OpenWRT developers or contributors have
this router. If yes, my opinion is to add support for the board using
the patches sent by Matthew Fatheree as base, reworking them and drop
wireless support for now until they (Marvell or Belkin) develop a
cfg80211 or mac80211 comp
Hi Nathaniel,
nwf wrote:
Fixed; while here I took the liberty of making an FSCACHE option and splitting
out the AFS FSCACHE flag to its own knob.
Getting there, getting there - with the fscache splitted out, some
tweaks are needed yet, comments inline.
diff --git a/package/kernel/linux/mo
Hi,
nwf wrote:
Salutations, list. This patch adds configuration knobs for the in-kernel kAFS
client and its dependencies. We have an AFS cell used for shared configuration
files and nightly snapshots of local state, and having our OpenWRT devices be
able to play along would be fantastic. Hope
Alexander Couzens wrote:
Signed-off-by: Alexander Couzens
---
.../sunxi/base-files/etc/uci-defaults/02_network |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/sunxi/base-files/etc/uci-defaults/02_network
b/target/linux/sunxi/base-files/etc/uci-defaults/02_
Alexander Couzens wrote:
Signed-off-by: Alexander Couzens
---
target/linux/sunxi/config-3.13 | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/sunxi/config-3.13 b/target/linux/sunxi/config-3.13
index 4f8d191..6577df6 100644
--- a/target/linux/sunxi/config-3.13
+++ b/target/linux/
Just one more question about the script.bin file.
I have a script.bin I built my self following instructions here:
http://linux-sunxi.org/FirstSteps
is OpenWrt buildroot also going to compile this file ?
The script.bin is a clone of devicetree developed by Allwinner. It's
similar to a dtb file.
On Tue, 27 Aug 2013, Michael Heimpold wrote:
currently I'm trying to port OpenWRT to a new i.MX28 based device,
see patch series I sent a few seconds ago.
I tried to run the latest stable kernel, but it does not boot and do not
show any message on the debug UART.
Running an older stable kernel
2013/6/5 Zoltan HERPAI mailto:wigy...@uid0.hu>>
Hi,
Any comments on this set?
Thanks,
Zoltan Herpai
On Mon, 27 May 2013, Zoltan HERPAI wrote:
This patch will add support for i.MX23-based boards, starting with
Olimex Olinuxino. This is an ARM9-based
Hi,
Any comments on this set?
Thanks,
Zoltan Herpai
On Mon, 27 May 2013, Zoltan HERPAI wrote:
This patch will add support for i.MX23-based boards, starting with
Olimex Olinuxino. This is an ARM9-based board which comes in different
flavours depending on devices.
Currently supported:
- 3.9.4
Add missing regulator symbols into generic config.
Signed-off-by: Zoltan HERPAI
---
Index: target/linux/generic/config-3.9
===
--- target/linux/generic/config-3.9 (revision 36731)
+++ target/linux/generic/config-3.9
Adding target support for i.MX23, initial setup for the different
Olinuxino boards.
Signed-off-by: Zoltan HERPAI
---
Index: target/linux/imx23/image/Makefile
===
--- target/linux/imx23/image/Makefile (revision 0)
+++ target
Adding tools support for booting up an i.MX23-based board via bootlets.
Signed-off-by: Zoltan HERPAI
---
Index: package/imx-bootlets/patches/001-skip_sb_generation.patch
===
--- package/imx-bootlets/patches/001
- probably sound and FB
Patch list:
[PATCH 1/3]: Add tools support for i.MX23
[PATCH 2/3]: Add target for i.MX23
[PATCH 3/3]: Add missing regulator symbols
Regards,
Zoltan Herpai
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https
Adding target support for i.MX23, initial setup for the different
Olinuxino boards.
Signed-off-by: Zoltan HERPAI
---
Index: target/linux/imx23/image/Makefile
===
--- target/linux/imx23/image/Makefile (revision 0)
+++ target
Adding tools support for booting up an i.MX23-based board via bootlets.
Signed-off-by: Zoltan HERPAI
---
Index: package/imx-bootlets/patches/001-skip_sb_generation.patch
===
--- package/imx-bootlets/patches/001
- probably sound and FB
Patch list:
[PATCH 1/2]: Add tools support for i.MX23
[PATCH 2/2]: Add target for i.MX23
Regards,
Zoltan Herpai
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Adding target support for i.MX23, with initial profiles for the
different Olinuxino boards.
Signed-off-by: Zoltan HERPAI
---
Index: target/linux/imx23/image/Makefile
===
--- target/linux/imx23/image/Makefile (revision 0
Add tools support for booting up an i.MX23-based board via bootlets.
Signed-off-by: Zoltan HERPAI
---
Index: package/imx-bootlets/patches/003-add-olinuxino.diff
===
--- package/imx-bootlets/patches/003-add-olinuxino.diff
progress for:
- I2C
- SPI
- probably sound and FB
Patch list:
[PATCH 1/2]: Add tools support for i.MX23
[PATCH 2/2]: Add target for i.MX23
Regards,
Zoltan Herpai
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org
, 2013 at 4:17 PM, Benjamin Henrion wrote:
On Mon, May 6, 2013 at 3:34 PM, Benjamin Henrion wrote:
On Mon, May 6, 2013 at 9:21 AM, Zoltan HERPAI wrote:
Hi,
Please find the initial patch to support the Olinuxino i.MX233 line of
boards. This is an ARM9-based board that comes in multiple flavours
Hi John,
Sure, I've attached the splitted patchset.
Thanks,
-w-
On Mon, 6 May 2013, John Crispin wrote:
On 06/05/13 09:21, Zoltan HERPAI wrote:
Index: tools/elftosb/Makefile
===
--- tools/elftosb/Makefile (revis
Hi,
Please find the initial patch to support the Olinuxino i.MX233 line of
boards. This is an ARM9-based board that comes in multiple flavours
depending on devices available and board size. Current support is for
3.8.11 and ext4 rootfs, wiki page has been updated.
Regards,
-w-[0.00]
Hi,
I have a Wandboard and an i.mx233 board already with patches locally. I
leave it up to Kaloz and co. to decide what'll happen with those.
Thanks,
Zoltan H
Michael Heimpold wrote:
Hi,
+ARCH:=arm
+BOARD:=imx61
I'm working on patches to add support for Freescale i.MX28 based boa
Echo-reply with a bit of lag.
-w-
Hamish Guthrie wrote:
> Hi All,
>
> Please just respond to this mail as quickly as possible.
>
> Thanks in advance.
>
> Regards
>
> Hamish
> ___
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> http://li
101 - 165 of 165 matches
Mail list logo
