[I posted this to the forum, but I loathe forums and I later discovered
there are mailing lists]
Hello,
This is the model of the router supplied by my isp (ya.com) in spain for
double play (adsl+voip, replacing analog voice), so the model number
probably means nothing.
It's made by arcadyan, i
En/na Luca Olivetti ha escrit:
> The wireless chip is an atheros 2417 (3rd photo), the switch is a
> realtek (2nd photo) and there's not much else there.
> I suppose it's a danube because the firmware file (that I cannot
> decipher) it's called
> "ya.com-F
En/na Luca Olivetti ha escrit:
> I managed to connect a serial cable and get a bootlog and it is
> definitely a danube.
> The bootlog is similar to the one here:
> http://wiki.openwrt.org/OpenWrtDocs/Hardware/T-Com/Speedport_W700V
That page links to http://www.kessler-design.com/spe
En/na Luca Olivetti ha escrit:
> En/na Luca Olivetti ha escrit:
>
>> I managed to connect a serial cable and get a bootlog and it is
>> definitely a danube.
>> The bootlog is similar to the one here:
>> http://wiki.openwrt.org/OpenWrtDocs/Hardware/T-Com/Speedport
En/na Robert P. J. Day ha escrit:
on that very hardware page, there's a link labelled "Supported
platforms on kamikaze". ok, that sounds promising, let's go there,
where we find:
https://dev.openwrt.org/wiki/platforms
which doesn't even list all the platforms (specifically it doesn't say
Al 11/05/11 16:23, En/na Stefan Monnier ha escrit:
> Apparently the Gigaset SX763 now works under OpenWRT. It seems it's
> possible to make both the wifi and the modem work.
It doesn't seems the wifi currently works (neither does the usb):
http://www.mail-archive.com/openwrt-devel@lists.openwrt.
Al 17/08/11 19:51, En/na Simon Iremonger (wiltslug) ha escrit:
> On 2011-08-17 15:45, Stefan Monnier wrote:
>> I was wondering if there is some specialized HTPC-style box (along the
>> lines of the network-media-tanks, say) which support Free Software
>> sufficiently well to run OpenWRT?
> HTPC = r
Al 21/10/2011 11:28, En/na Tyler J. Wagner ha escrit:
However, wireless throughput is dramatically lower. I believe someone
posted about this recently, but I cannot find the post. Using iperf to
burst large volumes of UDP traffic, I've found the following results:
I only tested in client mode
El 05/10/14 12:25, Robert P. J. Day ha escrit:
>
> a couple more simple (and quite possibly dumb) questions, if i might
> ... built a new squashfs image for my TL-MR3220 based on the config
> file at the downloads page:
>
> https://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/
>
El 26/10/14 a les 12:38, Robert P. J. Day ha escrit:
>
> * can i do that through the GUI?
> * can one even *see* the currently-selected theme in the GUI?
Click on the System tab then in "System properties" click on "Language
and Style"
Bye
--
Luca
__
10 matches
Mail list logo