Talking about installing Linux into a VM, I used to use Vagrant. I say
"used to" because I haven't run my own VM hypervisor in a while as just
about everything I do is either in Docker or in The Cloud.
Regards,
- Robert
On Mon, Sep 11, 2023 at 1:52 PM Tomas Kuchta
wrote:
> On Mon, Sep 11,
Yup. Might want to verify that most recent backup.
On Tue, Jun 13, 2023 at 11:41 PM Ted Mittelstaedt
wrote:
> If it is a magnetic media drive that is older the drive could be suffering
> end stage sector failure where the bad sector table is filled up. I've
> seen it many times and it always
I’m guessing that your questions might be answered by reading the comments
in your resolv.conf file, especially the part about it being autogenerated
and the part about a manual page.
Usually, personal computers ( contrast with servers ) use DHCP to configure
their network settings. I’m guessing
Can you give an example of what you've tried and what you would like the
expected outcome to be?
Here's a quick sample showing lines 4 and 5 have been added:
$ diff <( seq 1 3 ) <( seq 1 5 )
3a4,5
> 4
> 5
Regards,
- Robert
On Tue, Dec 27, 2022 at 2:35 PM Ben Koenig
wrote:
> Hi all,
>
> I
On Sun, Dec 18, 2022 at 7:16 PM David Fleck wrote:
> I use the laptop for web browsing and lightweight programming (generally
> command-line scripting), along with some video HDMI streaming and
> occasional DVD watching.
If that is really all you are doing with a laptop, then you might want to
Something sounds suspicious or pieces to the puzzle are missing. Changing
the passphrase on a private key shouldn't change anything on the public key
side. Could it be that someone slipped a different public key in your
authorized_keys file? - Robert
On Wed, Dec 14, 2022 at 12:15 PM Rich
Yes, you can run both an Android app and a Linux app at the same time. For
example, at this moment I am running the Brave browser ( an Android app )
and VSCode ( a Linux app ) at the same time.
@Vince Winter: What's a "mini Linux environment"? Or did you mean
"minimal"? The Linux Development
he following:
> $ slackpkg update
> $ slackpkg search tex (to make sure the mirror was properly retrieved)
> $ slackpkg install texlive xfig fig2dev texinfo
>
>
> -Ben
>
>
> --- Original Message ---
> On Friday, December 2nd, 2022 at 4:27 PM, Robert Citek <
to me, it makes replicating your setup a bit more ...
challenging.
But to answer your question: no, I do not have TeXLive 2021 installed in my
Slackware environment.
Regards,
- Robert
On Fri, Dec 2, 2022 at 5:09 PM Rich Shepard
wrote:
> On Fri, 2 Dec 2022, Robert Citek wrote:
>
> >
That doesn't work for me:
bash-4.3# installpkg texindy
Cannot install texindy: file not found
Regards,
- Robert
On Fri, Dec 2, 2022 at 4:34 PM Rich Shepard
wrote:
> On Fri, 2 Dec 2022, Robert Citek wrote:
>
> > What distro are you using? What commands did you use to install the
What distro are you using? What commands did you use to install the
software?
Regards,
- Robert
On Fri, Dec 2, 2022 at 4:02 PM Rich Shepard
wrote:
> On Fri, 2 Dec 2022, Ben Koenig wrote:
>
> >>> bash-5.1$ locate texindy
> >>> /usr/bin/texindy
> >>> /usr/man/man1/texindy.1.gz
> >>>
Or automatically launch screen from within your .profile.
https://stackoverflow.com/a/20515245
I also alias exit so that I remember to detach instead of exit:
[ ${STY} ] && alias exit="echo You are in a screen: ${STY}."
And I can use \exit if I really want to exit.
Regards,
- Robert
On Mon,
+1 for screen, tmux, or Docker ( or screen/tmux in Docker ). They all work
really well for reattaching to a running process to view the display.
nohup works, but I've never had good luck with it.
Regards,
- Robert
On Tue, Nov 8, 2022 at 3:25 PM Russell Senior
wrote:
> Have you tried screen
Some of the questions that folks asked could be answered with some shell
commands. Here they are wrapped in a Docker container.
docker container run --rm -i ubuntu:22.04 <<'eof'
apt-get update
apt-get install -y --no-install-recommends \
dnsutils whois netbase curl jq
This discussion makes me wonder if anyone can recommend a good YouTube
video ( or any other source ) that does a nice job of explaining all the
pieces of SIP calling and how those pieces fit together. - Robert
On Wed, Sep 28, 2022 at 3:04 PM Randy Bush wrote:
> > Would Ziply Fiber, my ISP and
In the vein of not answering the question but instead making a side
comment, I always connect to a video conference ( Zoom, Jitsi, Google Meet,
etc. ) with at least two different devices: my smart phone and a laptop.
They also are via two different data paths: cell and Ethernet. In the event
one
gt; ext4, and I am running benchmarks.
> >>
> >> Initial results from hdparm (on a different machine - SurfacePro 4
> >> running Ubuntu
> >> Timing cache reads: 9598.53 MB/sec
> >> Buffered disk reads: 6.47 MB/sec
> >>
> >> Waiting for disks be
Indeed, that sounds really slow:
( 138GB * 1000MB/GB ) / (26hr * 60min/hr * 60s/min ) = 1.5 MB/s ~ 12 Mbps
That's in the USB1.x range. If you use USB3.0 and can get 100MB/s write
speed, you'd be done in about 6 hours.
Have a look at hdparm to get some info on read/write performance of your
On Thu, Jul 14, 2022 at 11:18 AM Rich Shepard
wrote:
> On Thu, 14 Jul 2022, Tomas Kuchta wrote:
>
> > What does fdisk -l and/or lsblk tells you?
>
> Tomas,
>
> fdisk -l didn't see it at all.
>
That's odd. For comparison, this is what lsblk outputs before and after I
insert a USB stick:
#
Out-of-band management, e.g. DRAC, does work from boot up. But that's for
servers and a few high-end desktops. But you have to ask yourself, how
often are you messing with the BIOS and/or firmware?
VMs are a nice solution, too: minimal OS + hypervisor on the hardware, then
full OS in a VM. For
Smells like tethering.
I do that often, just not with that equipment.
To any connected host, it should look like just another Ethernet over USB
connection.
Is that what you are doing?
What issues are you having?
Regards,
- Robert
On Sat, Jun 4, 2022 at 12:53 PM Richard Owlett wrote:
> On
If you wanna host it, great. Personally, I don’t. - Robert
On Fri, May 13, 2022 at 3:18 PM Ben Koenig
wrote:
> Github??? Do I need to write a howto for hosting a repo with cgit?
>
> -Ben
>
>
> --- Original Message ---
> On Friday, May 13th, 2022 at 2:05 PM,
Just to clarify, md0 seems to be working just fine. It's md1 that seems to
be having an issue(s). And if md1 was partitioned or configured to be used
in an LVM, mounting it won't work.
If we parse the data from lsblk, we can see that md0 is made of 5 devices,
sdb1-sdf1, which are all of the
ine, being a raid1 with at least 1 drive
> surviving.
>
> md1 with 4 drives out of 6 is somewhat less clear that it could survive. it
> did rebuild, so I can only assume that means it at least believes the data
> is intact. I guess I'm looking for a way to validate or invalidate this
&
Login to a web service, ssh, other?
If ssh, often the simplest and quickest solution is to switch to a
non-obvious port, adjusting any firewall rules on DO, if needed.
Regards,
- Robert
On Tue, May 10, 2022 at 7:44 PM Keith Lofstrom wrote:
> Be careful what you write about powerful men,
On Sun, May 1, 2022 at 3:30 AM Richard Owlett wrote:
>
> > *MY QUESTION*
> > What should I be reading to install Debian along side Windows that will
> > likely have UEFI and possibly Secure Boot? The last time I dual booted
> > Linux/Windows it was on a legacy BIOS system.
> >
> > TIA
>
> My
Greetings, Wes.
>From the information you provided, I’m guessing you built the RAID from
five drives ( /dev/sd{f,g,h,i,j} ), which created a single /dev/mda device.
That device was partitioned to create devices /dev/mda{1-10}. And those
partitions were then used for the LVM.
But that’s just a
On Fri, Apr 29, 2022 at 2:19 PM Jeff Kirsher wrote:
> Although I like the idea of running Linux and just make Windows a VM,
> that way you could still remotely access their system via Linux, while
> they play in Windows. I actually did something similar almost 20
> years ago for my
+1
On Fri, Apr 29, 2022 at 1:21 PM Russell Senior
wrote:
> *MY ANSWER*
>
> for example:
>
> https://www.windowscentral.com/how-setup-windows-10-virtual-machine-linux
>
> You may be better off running windows inside a virtual machine on
> Linux. It is quicker and easier to start when needed and
On Tue, Apr 19, 2022 at 7:00 AM Rich Shepard
wrote:
> On Mon, 18 Apr 2022, Michael Barnes wrote:
>
> > Now I want to copy all those files into a new directory. I've tried
> > various combinations of pipe to something, but no joy.
>
> Michael,
>
> I'm not as knowledgable as Russell or Galen but
On Thu, Apr 14, 2022 at 10:12 AM Ben Koenig
wrote:
> Original Message
> On Apr 14, 2022, 7:34 AM, Robert Citek < robert.ci...@gmail.com> wrote:
> On Thu, Apr 14, 2022 at 12:52 AM TomasK
> wrote:
> > On Wed, 2022-04-13 at 20:22 -0700, Keith Lofstro
On Thu, Apr 14, 2022 at 12:52 AM TomasK
wrote:
> On Wed, 2022-04-13 at 20:22 -0700, Keith Lofstrom wrote:
> > Questions for you folks with years of Ubuntu experience:
> >
> > 1) How easy/fraught is a dist-upgrade, say 16.04 to 20.04?
> >
> It is easy to go from one LTS to the next: 16.04 -->
To demonstrate the issue, try these commands:
cd $( mktemp -d /tmp/rsync.demo.XX )
mkdir -p a
touch a/x.{0001..}
rsync -aR a/./ ./b/ & sleep 0.1 ; kill -19 %1
rm -f a/x.000*
kill -18 %1 ; wait
I my system, I get this:
[1] 30107
[1]+ Stopped rsync -aR a/./ ./b/
file has
On Tue, Mar 22, 2022 at 8:52 AM Tomas Kuchta
wrote:
> On Tue, Mar 22, 2022, 09:16 Rich Shepard wrote:
>
> > Last night's incremental backup for /home has an error:
> > Rsync-Errors
> (/media/backup/salmo-home/20220322-0030/tree/../rsync_error):
> >
On Mon, Mar 7, 2022 at 4:18 PM King Beowulf
wrote:
> On 3/4/22 13:41, Tomas Kuchta wrote:
> > 1. You need to be root to use journalctl
> > 2. Start looking/using at man pages, info pages and other on-line
> > up-to-date sources.
> FYI. Slackware, does not use systemd. journalctl is used to
Wow! This is a highly personal question that really depends on your use
cases.
But for a point of comparison, my use cases tend to be bimodal. That is, my
compute needs are either very light ( email, browsing, text editing ) or
very heavy ( analysis of scores of TB ) with very little in between.
Just to add a bit of complexity, the number depends on the filesystem
used. While true for an ext* filesystem that the number reflects the count
of the number of folders within a directory, including the pointers to its
parent and itself ( .. and . ), that may not be true on other filesystems,
On Fri, Jan 21, 2022 at 1:45 PM Eric House wrote:
> > With screen you can resize the terminal size to fit using ctrl-a F -
> > that's your screen's control command followed by a capital F.
>
> That works! If I have two different terminals ssh'd into the same screen
> session and resize one then
User-Agent Switcher
https://addons.mozilla.org/en-US/firefox/addon/uaswitcher/
Good luck and let us know how things go.
Regards,
- Robert
On Fri, Jan 21, 2022 at 1:51 PM Dick Steffens wrote:
> I recall someone mentioning a way to make Firefox look like it's a
> Windows version instead of a
On Fri, Jan 21, 2022 at 1:45 PM Eric House wrote:
> > With screen you can resize the terminal size to fit using ctrl-a F -
> > that's your screen's control command followed by a capital F.
>
> That works! If I have two different terminals ssh'd into the same screen
> session and resize one then
On Fri, Jan 21, 2022 at 2:09 AM John Jason Jordan wrote:
> * If you have the laptop folded over, in 2-in-1 mode, how can you hold
> it up in the air (like you were reading a book sitting in a
> recliner), without your fingers pressing on the keys in back?
>
After a certain angle, the
s in the
> cloud, but my brain is already plenty cloudy without that. When I read
> something I want a copy of it on my own computer, not someplace in the
> cloud that I have no control over.
>
> On Thu, 20 Jan 2022 16:09:06 -0700
> Robert Citek dijo:
>
> >Same scenari
ing I can't do locally I do in GCP where I keep a few systems powered
> down. I mount my homedir from a synology NAS in the closet. It's a workflow
> that works very well for me. There's even a globalprotect client for
> ChromeOS for those stodgy work connections.
>
> Tim
>
>
Thanks for your post, Timothy.
I have almost the same environment here: read/listen to books on smartphone
or tablet or Kindle, otherwise use a Chromebook ( rarely, I'll use my
MacBookPro). In fact, if I need a "real" linux ( or Windows ) environment,
I just create one in the cloud and then
On Mon, Jan 17, 2022 at 9:47 PM John Jason Jordan wrote:
> Does anyone know about putting Linux on Chromebooks? Or websites
> dedicated to the issue? Suggestions welcome!
>
Depending on what you want to do, you may not need to install another
distro. Rather, you can simply "enable" Linux.
Open
On Wed, Jan 5, 2022 at 3:42 PM Michael Ewan wrote:
> For a file system I highly recommend XFS, it is way more robust
> and way faster than ext4, the Linux kernel has supported it for years.
>
One of the advantages of using LVM is to expand or shrink a Logical Volume.
But that requires the
I also have CenturyLink. However, I haven't hosted a box in my house in
years ( well over a decade ). I went from static IP on the server(s) in my
basement, to DHCP with dynamic DNS, to static IP at a CoLo, and finally to
VM instances in the cloud. Cost and convenience were the prime
On Sun, Dec 12, 2021 at 2:02 PM Paul Heinlein wrote:
> On Sat, 11 Dec 2021, Dick Steffens wrote:
>
> > Is anybody using ABC Plus to typeset music?
> >
> > http://abcplus.sourceforge.net/
>
> I used ABC a long, long time ago.
“ABC Plus. Now that’s a name I’ve not heard in a long time, a long
Close. Remember, an awk script has the structure …
PATTERN { ACTION }
So you want ‘NR > 1’ to be a pattern, but you have it as an action.
Your code needs to look more like this …
BEGIN { FS = ","; OFS = "," }
NR > 1 { print $1, $2, $3, $4, $5, $6, $7, $8 "chl-a", $9, "ug/l" }
Regards,
- Robert
On Thu, Nov 18, 2021 at 8:29 AM Paul Heinlein wrote:
> I installed CentOS 9 Stream yesterday as a VM. (VMware note: to
> install from the DVD ISO, you must use UEFI boot and the "Secure"
> option must be deselected.)
Thanks, Paul, for going through these steps and sharing your experiences.
Do
On Wed, 10 Nov 2021, Robert Citek wrote:
>
> > What are you trying to do? Can you post an example of inputs and
> > desired outputs?
>
> Input: '14 output: 14
> Input: '26.3output: 26.3
>
> Rich
>
Good morning, Rich.
I’m still nursing my coffee this morning, so my brain isn’t fully up to
speed. What are you trying to do? Can you post an example of inputs and
desired outputs?
Regards,
- Robert
On Wed, Nov 10, 2021 at 10:44 AM Rich Shepard
wrote:
> The exported (external) database query
, Nov 8, 2021 at 2:14 PM Rich Shepard
wrote:
> On Mon, 8 Nov 2021, Robert Citek wrote:
>
> > What are you really trying to do? Get the data in an electronic format,
> or
> > print it on paper, or something else? - Robert
>
> Download digital data that can be analyzed.
>
> Rich
>
What are you really trying to do? Get the data in an electronic format, or
print it on paper, or something else? - Robert
On Mon, Nov 8, 2021 at 2:05 PM Rich Shepard
wrote:
> On Mon, 8 Nov 2021, Robert Citek wrote:
>
>
> > onto different pages. If so, then maybe "fi
It sounds like what you want is to "tile" the page and print separate tiles
onto different pages. If so, then maybe "fit to page" ( or some scaling
factor ) followed by `pdfposter` might fit your bill.
http://manpages.ubuntu.com/manpages/bionic/man1/pdfposter.1.html
FWIW, the link you provided
Hello Rich,
What comes to mind is the “fit to print” ( or similarly named ) option.
Is the website publicly accessible? If so, can you post the URL so that we
can try out solutions?
Regards,
- Robert
On Mon, Nov 8, 2021 at 12:22 PM Rich Shepard
wrote:
> I use HP/Compaq LA1951g 19" square
of an
awk script: conditional {action}
Simplified version of your script:
BEGIN {FS="|"}
$8 != " "
... and an example:
$ echo -e "a|b|c|d\na|b||d" | awk -F'|' '$3 != ""'
a|b|c|d
Regards,
- Robert
On Sat, Oct 30, 2021 at 9:51 AM Rich Shepard
wrote:
>
... and to negate the conditional use an exclamation point (!) :
$ echo -e "a\tb\tc\td\na\tb\t\td" | awk -F'\t' '$3 != "" {print}'
a b c d
Regards,
- Robert
On Sat, Oct 30, 2021 at 9:46 AM Robert Citek wrote:
> Sorry, this item didn't get pasted in my last post:
>
ecutive whitespace characters by default.
Regards,
- Robert
On Sat, Oct 30, 2021 at 9:41 AM Robert Citek wrote:
> Hello Rich,
>
> Here's a sample:
>
> $ echo -e "a\tb\tc\td\na\tb\t\td" | awk -F'\t' '{print}'
> a b c d
> a b d
>
> $ echo -e "a\tb\tc\td\na\
Hello Rich,
Here's a sample:
$ echo -e "a\tb\tc\td\na\tb\t\td" | awk -F'\t' '{print}'
a b c d
a b d
$ echo -e "a\tb\tc\td\na\tb\t\td" | awk -F'\t' '$3=="" {print}'
a b d
Good luck and let us know how it goes.
Regards,
- Robert
On Sat, Oct 30, 2021 at 9:31 AM Rich Shepard
wrote:
> I've
On Sun, Oct 10, 2021 at 5:37 AM Richard Owlett
> That has me considering installing a VM on their machine in which I would
> run Debian.
Unless there are hardware constraints, highly recommended to install VM.
Alternatives:
- install Debian on bare metal, install Windows in VM
- install VM
Greetings, all.
Has anyone checked out a Chromebook from the Multnomah County library?
https://multcolib.bibliocommons.com/v2/record/S152C495534
In newer versions of ChromeOS you can enable a Linux VM. I would try this
myself, but I am out of town and won't be back for several weeks.
While I
On Tue, Sep 28, 2021 at 12:45 AM Michael Dexter wrote:
> On 9/27/21 6:19 AM, Daniel Ortiz wrote:
> >> help when the person's computer doesn't have an OS yet?
> >>
> > There is a way, but it is less than ideal and may need correction by
> people
> > who see flaws in the way, but here is a way it
On Mon, Aug 16, 2021 at 8:17 PM Michael Barnes
wrote:
> Actually, they are callsigns instead of names. A couple of examples:
>
> w7...@k-0496-20210526.txt
> wa7...@k-0497-20210714.txt
> n8...@k-4386-20210725.txt
>
> I would like a simple count of the unique callsigns on a random basis and
>
from ProtonMail mobile
>
> Original Message
> On Jul 13, 2021, 11:44 AM, Robert Citek wrote:
>
> > Just for fun, I tried to get the gb64 compiler to run. But it's not
> > outputting "Hello, world!"
> > Here's what I am doing on Ubuntu 20.04:
> >
&g
Just for fun, I tried to get the gb64 compiler to run. But it's not
outputting "Hello, world!"
Here's what I am doing on Ubuntu 20.04:
apt-get update
apt-get install -y wget less tree g++ libgl-dev libglu1-mesa
libglu1-mesa-dev vim
cd /tmp/
wget
On Tue, Jul 13, 2021 at 5:14 AM Bill Barry wrote:
> On Tue, Jul 13, 2021 at 6:08 AM Richard Owlett
> wrote:
> >
> > On 07/12/2021 07:13 PM, Bill Barry wrote:
> > >[snip]
> > >
> > > I see a Debian package that might work
> > > python3-pcbasic - cross-platform emulator for the GW-BASIC family of
On Tue, Jun 29, 2021 at 9:06 PM Michael Barnes
wrote:
> On Tue, Jun 29, 2021 at 7:47 AM Paul Heinlein wrote:
>
> > On Tue, 29 Jun 2021, Michael Barnes wrote:
> >
> > > Somehow, I managed to create a file named -u. I cannot figure out how
> to
> > > look at it as any command I give thinks -u is
On Mon, Jun 21, 2021 at 8:28 AM, Rich Shepard
wrote:
> I found perl-Gtk3 on SBo (SlackBuilds.org) and installed it and its 6
> dependencies.
>
> Now CGStar builds but displays a long list of optional dependencies it
> cannot find; some actually are installed. I'll run the application without
>
On Mon, Jun 21, 2021 at 6:44 AM Rich Shepard
wrote:
> On Sun, 20 Jun 2021, Robert Citek wrote:
>
> > Can you please provide some context info, such as, what OS, what distro,
> > what version, what commands?
>
> Robert,
>
> Slackware-14.2/x86_65, perl-5.22.2-
On Sun, Jun 20, 2021 at 5:52 PM, Rich Shepard
wrote:
> On Sun, 20 Jun 2021, Rich Shepard wrote:
>
> > I'm trying to install Gtk3.pm in perl-5.22.2. gtk+3-3.18.9 is also
> > installed, but perl fails the installation.
>
> The errors for trying to install Gtk3.pm and Gtk3 are the same. The 358
>
On Fri, Jun 18, 2021 at 3:35 PM, Rich Shepard
wrote:
> On Fri, 18 Jun 2021, John Jason Jordan wrote:
>
> > I mount a removable drive at a folder in my root drive. I copy files to
> > it. I umount the drive and unplug it. Later, with the removable drive not
> > even plugged in I look at the
Couldn't help to golf that. :)
awk -v FS=, '$7 !~ /Gen12[cu]/'
Regards,
- Robert
On Wed, Sep 23, 2020 at 1:02 PM wrote:
> cat inputFile | awk -v FS=, '$7~/Gen12c|Gen12u/ {next; } {print;}' >
> outFile
>
> On Wed, 2020-09-23 at 12:44 -0700, Rich Shepard wrote:
> > Using gawk I want to print
+1 for Thomas. Usually for those one-offs, a GUI pdf tool will do the
trick just fine.
As for qpdf, either of these should work:
$ qpdf january-27-2020.pdf --pages . 6-7 -- Story.pdf
$ qpdf --empty --pages january-27-2020.pdf 6-7 -- Story.pdf
A simpler and less feature-rich tool is the
Four recommendations for troubleshooting:
1) use a test command that is not so destructive when it fails
2) log output
3) run it more frequently
4) include a positive control entry that you know should work and a
negative control that you know won't
For example, replace your original command:
When nohup works, it's great. But when it doesn't ( e.g. asks for a
password or confirmation a few minutes after starting ), it can be a bummer.
For those not familiar with screen, here are five basic commands to get
started:
# to create a screen session
screen
# to detach from a screen
On Tue, Aug 13, 2019 at 10:23 PM Rodney W. Grimes
wrote:
> If you had followed the thread you would know that byte 1
> of the file is a 0xA, aka LF, and the dd was to rip that
> byte off the file, but the command got morphed cause I
> used a BSD iseek=1 syntax, and gnu dd does not understand
>
Sounds like you used Emacs to do the equivalent of this:
< hatchery_returns-2019-08-12.csv \
tr -s '\r\n' '\n' |
sed -e 's/, /,/g;s/,$//' \
> hatchery_returns-2019-08-12.cleaned.csv
Is that right?
Regards,
- Robert
On Tue, Aug 13, 2019 at 8:37 AM Rich Shepard
wrote:
> On Tue, 13 Aug 2019,
This is what I am getting:
$ cat plug.awk
#!/usr/bin/awk
BEGIN { FS=OFS="," }
{ if ( $5 ~ /'Legal Contact'/ ) # double quotes also fail
next
else
print $0
}
$ cat plug.txt
'fld1','fld2','fld3','fld4','fld5'
'fee','fie','foh','fum','Keep Me'
'fee','fie','foh','fum','Legal
If you have Docker and if it works for your use case ...
$ docker run -t --rm python:3 python3 --version
Python 3.7.3
$ docker run -t --rm python:3 python3 -c 'print("hello, world!")'
hello, world!
Regards,
- Robert
On Fri, Apr 26, 2019 at 11:53 AM Bill Barry wrote:
> On Fri, Apr 26,
for any distribution as long as you know
> what crucial files that need to be restored.
>
> Good luck
>
> --
> David
>
> On Tue, 2019-04-23 at 15:05 -0700, Robert Citek wrote:
> > Greetings,
> >
> > How can I turn a VM with two virtual disks into a VM wi
Greetings,
How can I turn a VM with two virtual disks into a VM with a single virtual
disk that boots?
I have a VM with two virtual disks, running CentOS 6.10. The first disk
(vda) has the MBR and all the boot files, i.e. vda1 is eventually mounted
at /boot. The second disk (vdb) has an LVM
$ ls -1
BMRR_Pits.cpg
BMRR_Pits.dbf
BMRR_Pits.prj
BMRR_Pits.shp
BMRR_Pits.shx
$ rename 's/^BMRR_//' BMRR_*
$ ls -1
Pits.cpg
Pits.dbf
Pits.prj
Pits.shp
Pits.shx
Regards,
- Robert
On Fri, Feb 8, 2019 at 1:05 PM Rich Shepard
wrote:
> I have a directory with 30 files. Each filename begins with
e case against alias, as shown by this thread, shows one pain point to
> compare against the benefit.
> What is the issue with the '\' prefix, which I did not know existed.
>
> On Thu, Oct 4, 2018 at 4:49 PM Robert Citek
> wrote:
>
> > Avoid aliases and functions with a backslash.
Avoid aliases and functions with a backslash. For example:
$ \find /etc/ | head
Regards,
- Robert
On Thu, Oct 4, 2018 at 4:38 PM wrote:
> true - the alias usage was already answered by 'type find'
>
> However - if you reorder PATH variable than one could be picking up
> find from ~/bin for
Just a minor nit:
Though "survival of the fittest" is the catchphrase of natural selection,
"survival of the fit enough" is more accurate.
https://evolution.berkeley.edu/evolibrary/misconceptions_faq.php#b6
Regards,
- Robert
On Thu, Sep 13, 2018 at 10:11 AM Tyrell Jentink wrote:
> Fair
Hello Rich,
I've seen in the past you've used Chromium OS. I'm not familiar with it on
desktops, although I have used Chromebooks for a few years now. Would that
meet your criteria?
Regards,
- Robert
On Wed, Sep 12, 2018 at 11:22 AM Rich Shepard
wrote:
>I'm building a system for a user
I use jq fairly regularly for cleaning up JSON and pretty-printing.
> One related page I found is titled "jq is sed for JSON".
That's a pretty fair statement. And like sed, you can do some pretty
powerful transformations. And like sed, there comes a point where it
becomes easier to use some
Awk is a very nice "little" language. Glad to hear it worked. And
thanks for letting us know. - Robert
On Tue, Jun 19, 2018 at 4:58 PM, Rich Shepard wrote:
> On Tue, 19 Jun 2018, Robert Citek wrote:
>
>> $2 != "16.00" { print ; next } <= the decimal s
ards,
- Robert
On Tue, Jun 19, 2018 at 3:31 PM, Rich Shepard wrote:
> On Tue, 19 Jun 2018, Robert Citek wrote:
>
>> Couple of typos and an addition (-F,) :
>
>
> I'm not seeing the typos.
>
>> { cat <> 2012-10-01,14:00,90.7999
>> 2012-10-01,15:00,90.812
Couple of typos and an addition (-F,) :
{ cat < wrote:
> On Tue, 19 Jun 2018, Robert Citek wrote:
>
>> A quick pass. Needs testing and refactoring.
>>
>> $2 != "16.00" { print ; next }
>> flag == 0 && $2 == "16:00" { print ; flag=
A quick pass. Needs testing and refactoring.
$2 != "16.00" { print ; next }
flag == 0 && $2 == "16:00" { print ; flag=1 ; next }
flag == 1 && $2 == "16:00" { $2=="17:00"; print; flag=0 ; next }
On Tue, Jun 19, 2018 at 2:04 PM, Rich S
I don't fully understand your question, but here are some examples
that may be a step in the right direction:
$ seq 1 5 | sed -e '1~2s/$/ --/'
1 --
2
3 --
4
5 --
$ seq 1 5 | sed -e '0~2s/$/ --/'
1
2 --
3
4 --
5
$ echo -e "2012-10-01,16:00,297.94\n2012-10-01,16:00,297.94" | sed -e
I feel your pain. I've run into similar issues with many different
wifi hotspots (airports, hotels, buses, trains, cafes, etc.) each with
their own carrier. Rather than spend my rather limited time to figure
out how to make my device work with those hotspots, my solution was to
use a mobile
On Mon, Nov 20, 2017 at 9:19 AM, Rich Shepard wrote:
> UUID=da596a77-2fb4-41ed-881c-a3f8bb0ab437 /media/hd0 auto defaults 0 0
> /dev/sdc1/mnt/flashdrive vfatauto,users,rw 0 0
> /dev/sdb1/mnt/thumb vfatauto,users,rw 0 0
>
95 matches
Mail list logo