nkat wrote:
None of them run off LMS as the notebook and desktop are turned off
when not in use.
It looks like you are using mysb.com.
How to do you play the BBC stations ? The instruction will vary
according to your use.
Do you have a Favorite ?
Do you use the Logitech BBC menu ?
Have
philippe_44 wrote:
Normally, you should use '/' and not '\'. More precisely, you cannot end
the path by '\' , but you can use c:\toto, although I recommend c:/toto
for compatibility with Linux.
The log error cannot access happens when I do a system call that fails
to verify that the
nkat wrote:
In fact, gents, I am possibly one of many who may fall into that
category. I have spent ages combing the BBC blog and these forums for a
simple, up-to-date picture and guide as to how to restore or acquire
new, high quality streams of the BBC stations on my SB radios and SB3s.
castalla wrote:
Agreed! On all counts.
In fact, gents, I am possibly one of many who may fall into that
category. I have spent ages combing the BBC blog and these forums for a
simple, up-to-date picture and guide as to how to restore high quality
BBC stations on my SB radios and SB3s. So far,
philippe_44 wrote:
Port 1900 is used by the SSDP protocol. According to some old logs, 8080
is the port that your Marantz is using to receive upnp commands and I
guess 5431 is the M1. I don't know why 80 is needed as well. What
surprised me is I think you use ufw to deny traffic on outgoing
utgg wrote:
Actually, the real reason the streams were often erroring before they
could start was due to a bug in HLS.pm. I don't know if you are
monitoring any of this Triode, but you may want to include this in your
next update. Near the end of HLS.pm:
Code:
I'm currently experimenting with Qobuz and SmartMix again. Right now I'm
trying to look at the other side of the equation, reading the log Qobuz
generates. Sadly it very quickly generates more than 1000 lines of log
and the initial query gets cut off which makes this a bit difficult.
On thing
philippe_44 wrote:
ok - the ip : port parameter for upnp is available now (upnp_socket).
The ones for LMS have been here since the begining
BTW, if you can create a log (use -f filename) and send it to me when
you observe a problem, that would help me improving this app.
Okay, will
utgg wrote:
I couldn't resist even more fiddling with the alpha HLS plugin; I hope
you don't mind if you are watching Triode!
With the attached HLS.pm I've done a small optimisation of the string
copies, as already hinted at by Triode. This reduces the number of bytes
copied by around 500
PasTim wrote:
Frankly I have no idea. This is all internal to my network. What I do
know is that when I couldn't sq2u to work I looked at what ufw (my
firewall) was blocking, and this was one. When I allowed my server to
see the multicast, the system worked. So some part of the system
Is anyone using an RSSText item in their custom clock screensaver?
I cannot get this working at all. I have tried the default one supplied
but that gives no output.
I have tried creating my own custom one, trying all sorts of options but
I cannot get it to output anything.
I can create static
Owen Smith wrote:
To quote wikipedia:
224.0.0.1 The All Hosts multicast group addresses all hosts on the same
network segment.
Why your router would need to send to the all hosts multicast group to
get this to work is far from clear. Surely this traffic is all internal
to your
I'm currently experimenting with Qobuz and SmartMix again. Right now I'm
trying to look at the other side of the equation, reading the log Qobuz
generates. Sadly it very quickly generates more than 1000 lines of log
and the initial query gets cut off which makes this a bit difficult.
The
OK, and here we go again.
This time I managed to capture the first line, but it's not showing what
SmartMix sent to Qobuz, just the empty list Qobuz returns. So, I'm still
not getting anywhere. It very obedently returns 200 results, but I
cannot say what the results are for, so I cannot manually
crkm wrote:
Hi Philippe
Thanks again
Here's what I did to create the attached files.
Deleted config.xml
from cmd window: squeeze2upnp -i config.xml -f 21Mar
let program complete
zipped config.xml and 21Mar into 1st Run zip file
Edited config.xml to change buffer_dir and change to flac
utgg wrote:
I couldn't resist even more fiddling with the alpha HLS plugin; I hope
you don't mind if you are watching Triode!
With the attached HLS.pm I've done a small optimisation of the string
copies, as already hinted at by Triode. This reduces the number of bytes
copied by around 500
Read up on it above. He offered a refund
---
learn more about iPeng, the iPhone and iPad remote for the Squeezebox
and
Logitech UE Smart Radio as well as iPeng Party, the free Party-App,
at penguinlovesmusic.com
*New: iPeng 8, the Universal App for iOS 7 and iOS 8*
utgg wrote:
I couldn't resist even more fiddling with the alpha HLS plugin; I hope
you don't mind if you are watching Triode!
Things just keep getting better. Many thanks to all you expert
fiddlers
ChipMonk's Profile:
utgg wrote:
I couldn't resist even more fiddling with the alpha HLS plugin; I hope
you don't mind if you are watching Triode!
With the attached HLS.pm I've done a small optimisation of the string
copies, as already hinted at by Triode. This reduces the number of bytes
copied by around 500
wt0 wrote:
No, the post you quoted is referring to the version on the Amazon App
store. Amazon devices do not have Google Play services installed, which
is required for Wear and Chromecast support, and Amazon tend to reject
apps that even hint at using anything Google related.
The
PasTim wrote:
I don't deny any outgoing ports, at least I certainly don't intend to -
I'll check again that I haven't done something silly.
Edit: For clarity, when I said 'from my gateway' I mean my router
(192.168.1.1) to 224.0.0.1. I seem to need to allow these in to my
server.
To
local.bin wrote:
Ok apologies.
To be clear I've purchased from the start and I have to pay again for
the same app, if I want to continue to receive bug fixes etc?
I am all for supporting you, but paying again for the same app, goes
against the grain :(
Now a material design makeover
philippe_44 wrote:
oh ... one interesting chicken egg problem: because of the problem
with the buffer_dir default parameter, the creation of the config.xml
file does not work properly (no LMS device can be created) so you do not
see the detected upnp renderers on your network. Can you make
philippe_44 wrote:
ok - the ip : port parameter for upnp is available now (upnp_socket).
The ones for LMS have been here since the begining
BTW, if you can create a log (use -f filename) and send it to me when
you observe a problem, that would help me improving this app.
Attached. 17716
Everything had been working just fine with WaveInput until I installed
JRiver as a music player on my Dell Vista desktop. Since then I have
not been able to get WaveInput to stream into LMS 7.9
I've uninstalled JRiver. I've uninstalled and reinstalled drivers as
well as WaveInput. I've tried
The mystery of the upnp_socket parameter on my system.
If I run with the default (value ?) it runs fine with my firewall on.
The log reports using port 49153 at the start, and mentions 8080 for the
player. Note that port 49153 is not open for incoming packets in my
firewall.
If I run with
djfake wrote:
Attached. 17716
And this.
+---+
|Filename: sq2u.zip |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=17723|
I needed to set Speakers/Headphones to the default device. Voila!
OK to delete this thread. Thanks.
bzlrbi's Profile: http://forums.slimdevices.com/member.php?userid=30606
View this thread:
I would just like to thank all who contributed to this fix. I've been
looking for a fix since the BBC 'broke' listen again and am extremely
grateful there are smarter minds than mine not only to come up with a
solution, but to post instructions even a numpty like me can follow.
First post as I
crkm wrote:
Hi Philippe
Thanks yet again. My G: drive is the windows/boot drive (i.e. local)
mounted in the PC and is an SSD. I moved everything to a new
subdirectory G:\s2u and repeated the tests. At least this fixed the
default buffer_dir problem (see 1st zip file)
However, I'm still
Yes it did the trick. I'm getting in the habit of thanking you.
Much appreciated,
Henry Aguado
buelligan's Profile: http://forums.slimdevices.com/member.php?userid=9019
View this thread:
OK, got it working.
I think the rss example url is out of date, so that explains the default
one.
And I changed several things with my test rsstext saver, but I think I
had an empty fontsize specified which was stopping it displaying.
All working now.
philippe_44 wrote:
ok - the ip : port parameter for upnp is available now (upnp_socket).
The ones for LMS have been here since the begining
BTW, if you can create a log (use -f filename) and send it to me when
you observe a problem, that would help me improving this app.
I also found a
Hi, I'm getting the following warnings appearing in the log multiple
times when I look at information for a track or stream
I'll take a look at it. It's been a while since I used that plugin; suprised
it works at all (does it work?)
___
plugins
I've switched almost entirely to using iPlayerExtras for Listen Again
(thanks for your work bpa), for two reasons. First, it plays Radio 3 at
320kbps AAC which sounds so much better than the 128kbps max from HLS.
Second, iPlayerExtras appears to have between 3 and 4 weeks catchup
window depending
philippe_44 wrote:
It is clear but very strange - I tried on my Linux box (a VM, no fw) and
my Win7 box (fw), with various port, including the default one and it
all worked. I put on purpose a wrong IP address, and in that case, the
upnp stack does not initialize (error -208). It is even
A while back someone reported that Custom Library plugin was not working with
LMS 7.9. It seems to count songs in each custom library correctly when the
libraries are refreshed, but upon selecting a library and browsing into it, it
always reports empty.
I noticed the same. I had a library
philippe_44 wrote:
Do you still have foobar stopping when you start the other player ? I do
not see that in these logs.
Hi Philippe
Yes, Foobar did stop when I started the other player. However, when
taking the logs, I stopped Foobar through LMS. I will try simultaneous
streaming of music
PasTim wrote:
The mystery of the upnp_socket parameter on my system.
If I run with the default (value ?) it runs fine with my firewall on.
The log reports using port 49153 at the start, and mentions 8080 for the
player. Note that port 49153 is not open for incoming packets in my
@mherger
Thanks. I managed to figure out the log-limit, but it won't allow more
than in the webview. That does give me a better chance of looking
at the big picture, but sadly I still can't find the missing link,
which is the place where it SmartMix sends so. Something to Qobuz... Or
maybe
crkm wrote:
Hi Philippe
Yes, Foobar did stop when I started the other player. However, when
taking the logs, I stopped Foobar through LMS. I will try simultaneous
streaming of music files when my wife has finished listening to the
stream of Desert Island Disks via the CA :cool:!
Best
crkm
PasTim wrote:
netstat -tulpn does report the server is listening on 49152 and 49153,
but doesn't say which process it is.
I have stared at my firewall settings again, and now see that I have a
whole range open between 3 and 6 for my local network (I misread
the relevant IP as
42 matches
Mail list logo
