bluetdi wrote:
> @boomX2
>
> Thank you for the update.
> For us living in EU-Europe (not the Britains any more :)) there is a
> little inconsistency in air-pressure. It shows inch instead of
> hectopascal, so I changed it to "pressureMB" in row 2545 :
>
> >
Code:
> >
Hello,
I stuck trying to understand why the Naim and LMS won't talk. I can see
the LMS server in the Naim app, but doesn't appear as a player in Orange
squeeze? Neither app allows music to be heard. Thanks for the help!
Starting Squeeze2upnp:
muflon_ wrote:
> Gents,
> it is possible to run more than one plugin instance? (for example via
> manual instalation? )
> I would like to control 3 zones in my Denon receiver and this plugin can
> see only one device (as main zone)
> Many thnaks
Is it even possible (with of without LMS) to
cpd73 wrote:
> The dev version sends +/- the defined volume increment when using the
> up/down vol buttons when a player has fixed volume. This is also
> extended by a server-side Material setting that will cause Material to
> 'ignore' the fixed volume state. When that is set, the volume for
SpiderJon wrote:
> Please don't have MS ignore fixed volume completely.
>
> The existing way it functions, whilst arguably 'illogical' (in that the
> volume control still "works", at least for hardware interfaced by a
> plugin), actually seems to be do exactly what everyone wants, so far as
>
cpd73 wrote:
> However, I'm not sure if this is really required. Or if Material should
> just ignore fixed volume?
Please don't have MS ignore fixed volume completely.
The existing way it functions, whilst arguably 'illogical' (in that the
volume control still "works", at least for hardware
DAR wrote:
> I haven't fully understood all of your proposed solutions to address
> this problem in the material skin, but I want to make sure you're not
> overthinking this.
The dev version sends +/- the defined volume increment when using the
up/down vol buttons when a player has fixed
foopydog wrote:
> Ok, so I got the test3 build, and ran some more tests.
> Looking at the patch file, I see that the changes. Now
> slimproto.send_packet() is now showing the last_error instead of
> strerror(last_error).
> The same change was made to stream.send_header().
>
> When I ran the
cpd73 wrote:
> I'm on the fence. I'm happy to remove the 'Fixed volume' label, etc. I
> have just updated git/master (for 2.2.0) to add a server-side setting
> for this. But, I'm leaning towards removing this. Just noticed the
> 'Manage players' dialog ignores this fixed volume anyway...
gordonb3 wrote:
> you'll most likely be looking at some kind of malware blocker.
A few years ago - some 3rd party security software used to insert
themselves into the Winsock stack to catch malware which used "pipes" -
a few caused strange problem with LMS.
To check if the security software
yas1 wrote:
> Thankas for the quick response!
>
> Sorry, a bit new to this:
> [21-01-08 19:01:03.5362] Slim::Plugin::Extensions::Plugin::_parseXML
> (530) entry WaveInput vers: 1.04 url: http
> ://downloads.sourceforge.net/project/bpaplugins/OtherPlugins/WaveInputLinux-v104_7.6.ZIP
- the
Yeah, that was one of the two returns I expected to see.
The `vague description`is somewhat of a trademark for Microsoft - I
guess it helps them sell courses in understanding WTF might be going on
and in fact most people that do are very proud to be able to call
themselves MCSE when they pass.
bpa wrote:
> I installed it OK on a Ubuntu system running 8.1.1. There is nothing in
> the plugin or repository that stops installation in 8.1
>
> As Windows requires a support executable, there are two versions of
> WaveInput in the repository: one for Windows and one For Linux. So if
>
SpiderJon wrote:
> Wouldn't this just overcomplicate matters? Is there really a case for
> adding another "settings" option that doesn't fundamentally change what
> already happens i.e.
>
> If the player volume is fixed, altering the setting only has an effect
> if, as in gnackwatschn's set
expectingtofly wrote:
> Doesn't look to be an issue with BBC Sounds. It looks like your player
> stopped for a couple of minutes, as no calls were made to BBC Sounds
> asking for data. The next action that was logged was you restarting the
> stream
OK - Thanks again.
AngloCuencano wrote:
> I enabled debug, and now Sounds has been streaming for a couple of hours
> without interruption. So perhaps just a temporary glitch at the BBC end.
That's good news. Probably safe to set the logging back to "warn" as
"debug" is extremely verbose
*BBC Sounds Plugin
yas1 wrote:
> Hi,
> after an update to LMS v8.1.0 I also get this error (debug on):
>
> [21-01-08 18:37:40.7441] Slim::Utils::PluginManager::load (237) Couldn't
> load WaveInput. Error: Plugin is incompatible with this version of
> Logitech Media Server. Please update.
> [21-01-08
I should also say that these other plugins also error but I didn't have
any active before the update:
[21-01-08 18:44:27.0077] Slim::Plugin::Extensions::Plugin::_parseXML
(511) entry MHCPAN does not match, wrong target [unix != win]
[21-01-08 18:44:27.0716]
expectingtofly wrote:
> ok, it may have been irrelevent. Please can you set BBC Sounds logging
> to debug and send me a log (by direct message is fine) and I'll see if I
> can identify the issue.
I enabled debug, and now Sounds has been streaming for a couple of hours
without interruption. So
Hi,
after an update to LMS v8.1.0 I also get this error (debug on):
[21-01-08 18:37:40.7441] Slim::Utils::PluginManager::load (237) Couldn't
load WaveInput. Error: Plugin is incompatible with this version of
Logitech Media Server. Please update.
[21-01-08 18:37:42.1693]
SpiderJon wrote:
> Wouldn't this just overcomplicate matters? Is there really a case for
> adding another "settings" option that doesn't fundamentally change what
> already happens
I'm on the fence. I'm happy to remove the 'Fixed volume' label, etc. I
have just updated git/master (for 2.2.0)
Ron F. wrote:
> Under normal usage, when the player volume is fixed, showing "Fixed" and
> disabling volume controls in material is correct. I imagine for most
> users, including myself, this would be the desired behavior. So Craig,
> for alternative usage may I suggest an option: (yes, yet
simoh wrote:
> Hello expectingtofly.
>
> Listening to PM just now. All was OK until 30 minutes into the
> programme, when the audio stopped. The counter looped from 30:00/1:00:00
> to 30:04/1:00:00 thern back to 30:00/1:00:00 - no sound. Pausing, then
> pressing play restarted audio.
>
> This
expectingtofly wrote:
> Would you mind installing version 2.10.1 that is in the beta repository
> here http://plugins.expectingtofly.co.uk/betarepo.xml and confirm that
> has fixed your problem.
Hello expectingtofly.
Listening to PM just now. All was OK until 30 minutes into the
programme,
gnackwatschn wrote:
> Thank you for your fast reply, yes you got it right.
>
> I could not dig into this deep enough, to give you a reliable answer, if
> it has other impacts.
>
> I use the default skin called "Standard" (in german) which allows
> manipulating the volume slider and I could
Hello, first post.
Thanks for SqueezeLite-X, good looking and very useful.
I'm experiencing Dropouts when listening to MP3 files served via LMS.
Seems like those dropouts that were reported earlier.
The problem seems to be with SqeezeLite running on Windows, not LMS.
I'm using SqueezeLite-X
cpd73 wrote:
> As stated, I see this multi-artist string in older Material releases -
> so I dont think there is any change.
I have never seen a change (have always seen multiple artists for tracks
tagged that way)
AngloCuencano wrote:
> I disabled native AAC, but it didn't make any improvement to the
> streaming performance. But the error no longer appears in the log.
ok, it may have been irrelevent. Please can you set BBC Sounds logging
to debug and send me a log (by pm is fine) and I'll see if I can
Ahm... nobody mentioned this so far, or did I miss something?
32899
How well it works on a desktop I'll have to see :)
+---+
|Filename: Bildschirmfoto 2021-01-08 um 17.10.58.jpg|
|Download:
expectingtofly wrote:
> I'm not aware of any changes that would cause that. Unless the BBC have
> changed the AAC format on the international stream. However, that seems
> unlikely, especially if the stream starts then stops. You could try
> disabling native AAC in advanced->file types, which
expectingtofly wrote:
> Unless anyone else has any ideas what can cause that player error
> message?
The only time I've seen this error was when trying to play a MP4 file
that was not optimised for streaming (i.e. frame index was after the
audio data) - but changes made since Sept have handled
AngloCuencano wrote:
> Previously, the BBC Sounds plugin has been very reliable for me, but
> today streams have started to cut out. I tried listening to several
> different programs and they all showed the same behaviour, they will
> stream OK for a few minutes, and then just stop. I see this
cpd73 wrote:
> So, jsut to confirm; Player's volume is fixed at 100%, but the
> volume-slider, etc, should function as normal? This -should- be easy
> eniough. Are there scenarios where this would not be wanted?
>
> This would make the code easier, as I dont really need to care about
> fixed
cpd73 wrote:
> So, jsut to confirm; Player's volume is fixed at 100%, but the
> volume-slider, etc, should function as normal? This -should- be easy
> eniough. Are there scenarios where this would not be wanted?
>
> This would make the code easier, as I dont really need to care about
> fixed
Yes. Martin and I fixed a few issues with the previous release. The
'changelog'
(https://ralph_irving.gitlab.io/lms-community-firmware/changelog.html)
lists what's new.
Oh, ok, cool!
--
Michael
___
plugins mailing list
Previously, the BBC Sounds plugin has been very reliable for me, but
today streams have started to cut out. I tried listening to several
different programs and they all showed the same behaviour, they will
stream OK for a few minutes, and then just stop. I see this repeated
error in the log:
slartibartfast wrote:
> Just now I experienced the stuttering issue for the first time. I had
> set my "power on resume" settings to Pause at power off/Resume at power
> on to test something else and Radio 2 started playing when the Radio
> started complete with stuttering for a few seconds.
>
gnackwatschn wrote:
> In my case and also for other people who already posted here is: I have
> a Raspberry Pi with SqueezeLite, connected to a Denon AVR. The
> SqueezeLite volume is fixed at 100% and should always stay there,
> because all volume adjustments should be done on the Denon AVR.
PasTim wrote:
> Can't you change the LMS setting, allow volume changes, and fix the
> squeezelite volume to 100% (-U) ? Or won't that do what you want?
Thank you for your reply.
I already tried this and unfortunatley it did not work. In this case the
Denon Serial plugin stops adjusting the
gnackwatschn wrote:
> The reason why I am requesting this feature is: In Classic Skin this is
> possible and it is very useful in some scenarios.
>
> In my case and also for other people who already posted here is: I have
> a Raspberry Pi with SqueezeLite, connected to a Denon AVR. The
>
Just now I experienced the stuttering issue for the first time. I had
set my "power on resume" settings to Pause at power off/Resume at power
on to test something else and Radio 2 started playing when the Radio
started complete with stuttering for a few seconds.
Sent from my Pixel 3a using
cpd73 wrote:
> Why? The slider sets a value, which is fixed at 100% - therefore it
> cannot work.
The reason why I am requesting this feature is: In Classic Skin this is
possible and it is very useful in some scenarios.
In my case and also for other people who already posted here is: I have
PasTim wrote:
>
>
> But you are a star - a fix so fast! I am playing now, with no errors
> showing at all on the log, and no interruptions to sound.
> .
That's good news, thanks for testing.
*BBC Sounds Plugin Wiki* :
https://github.com/expectingtofly/LMS_BBC_Sounds_Plugin/wiki
expectingtofly wrote:
> Would you mind installing version 2.10.1 that is in the beta repository
> here http://plugins.expectingtofly.co.uk/betarepo.xml and confirm that
> has fixed your problem.
>
> I'm finding impossible to recreate the starting of a new stream before
> closing the first that
Dmitry© wrote:
> Hello Ralphy!
>
> Can i choose the channel number of multichannel sound card with ASIO
> driver? Now works only 2 first channels.
>
> Thank you!
No, that's not supported.
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox client builds'
philippe_44 wrote:
> You have to set a country code
Thank you! That did it.
I had one set earlier, but removed it as part of the process to try to
get it working.
All good again now.
Learnincurve's Profile:
mherger wrote:
> > Yes, the current community firmware 8.0.1r16824 is available at
> > https://sourceforge.net/projects/lmsclients/files/squeezeos/.
>
> Did you release a new build recently? A few of my devices offered
> another update today.
>
> --
>
> Michael
Yes. Martin and I fixed a
avr300 wrote:
> Yes, blue icon means connected to wifi but no connection to the selected
> LMS.
>
> It works as expected in Version 8.0.1 r16824You just made me realise there
> was an update [emoji3]
Sent from my Pixel 3a using Tapatalk
PasTim wrote:
>
> If there is anything else I can try, or tell you about my system, let me
> know.
>
Would you mind installing version 2.10.1 that is in the beta repository
here http://plugins.expectingtofly.co.uk/betarepo.xml and confirm that
has fixed your problem.
I'm finding impossible
mherger wrote:
> > Yes, the current community firmware 8.0.1r16824 is available at
> > https://sourceforge.net/projects/lmsclients/files/squeezeos/.
>
> Did you release a new build recently? A few of my devices offered
> another update today.
>
> --
>
> Michael
I updated to r16824 today.
d6jg wrote:
>
> One BIG problem for those of us with OCD in this area is that if we want
> to use Online Music Library integration all the work we put into tagging
> our libraries can be instantly shot to pieces by incorrect tags at
> Spotify, Qobuz, Tidal, Deezer etc
Agreed - our
Yes, the current community firmware 8.0.1r16824 is available at
https://sourceforge.net/projects/lmsclients/files/squeezeos/.
Did you release a new build recently? A few of my devices offered
another update today.
--
Michael
___
plugins mailing
slartibartfast wrote:
> Since I followed your instruction to enable the blue icon every time
> there has been a short disconnection the icon has been red so it
> probably isn't critical to have. Did blue mean connected to WiFi/network
> but not connected to LMS?
>
> Sent from my Pixel 3a using
@boomX2
Thank you for the update.
For us living in EU-Europe (not the Britains any more :)) there is a
little inconsistency in air-pressure. It shows inch instead of
hectopascal, so I changed it to "pressureMB" in row 2545 :
Code:
text => 'Luftdruck:
JJZolx wrote:
> Can the firmware be just be downloaded manually into the LMS folder? I'd
> like to get it upgraded and done with.
Yes, the current community firmware 8.0.1r16824 is available at
https://sourceforge.net/projects/lmsclients/files/squeezeos/.
Ralphy
*1*-Touch, *5*-Classics,
The error codes are documented 'by microsoft here.'
(https://docs.microsoft.com/en-us/windows/win32/debug/system-error-codes--9000-11999-)
I'm displaying the error code in hex, I should have prefixed it with
*0x*2745
But the description is vague.
WSAECONNABORTED
10053 (0x2745)
An
ralphy wrote:
> The -a is ONLY available when the output device is a file/stdout as
> described in the help message.
>
> >
Code:
> > -a Specify sample format (16|24|32) of output file when
using -o - to output samples to stdout (interleaved little endian
You have to set a country code
LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet,
1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000,
ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2,
Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport
PasTim wrote:
> I think I'll never understand. Why aren't Eric and JJ separate Track
> Artists on Album 1 as well? We just think very differently. I'll just
> make a couple of comments on the way I see things and then had better
> stop - this isn't a tagging thread, and I'm happy with the
cpd73 wrote:
>
> And, as I have stated multiple times, I cannot do this. There is no way
> (AFAIK) to tell if "a, b, c" is 3 artists, 2 artists (e.g. "a" and "b,
> c", or "a, b" and "c"), etc. If LMS returned an array of artists, then
> yes, but it does not.
Thanks. You have confirmed my
d6jg wrote:
> Does it help you understand if I replace the & in JJ Cale & Eric Clapton
> with a , ?
> Its just a text string but its the text string that the artists have
> chosen to put on the cover of their album so its what should logically
> be displayed.
>
> I thought it was an easy
d6jg wrote:
> 32892
>
> The display in Material is perfect. It is only displaying the first
> entered value in AlbumArtist but the 2 other values are still there and
> are being used for indexing. You have to be aware that the tagging must
> have the string you want displayed at position 1 but
expectingtofly wrote:
> Thank you for that log. That had my head scratching. It's all very
> odd.
> The stream is being asked to close, out of the blue, and then just carry
> on, like a pause, without a pause occurring.
> I don't understand the scenario why that is happening, I can't
Hi,
I see this problem has been asked many times, but I have tried to
follow the advice to delete the google API project and create a new one
and new API Access key, 0auth Client ID and Secret. The verification
code was generated and authenticated.
Any search still returns a blank, although
cpd73 wrote:
> But the split album-artists is when browsing, no? In which case artists
> are split here too. Material has never shown album-artist in
> now-playing/queue - so if there were in a comma separate list here you
> still would not have seen it.
I think we have slightly crossed wires.
PasTim wrote:
> Log attached.
>
> I've not had any connection problems for a long, long time, and the
> iPlayer plugin (and Internet radio via a browser) is flawless. It's
> strange.
Thank you for that log. That had my head scratching. It's all very
odd.
The stream is being asked to
d6jg wrote:
> Thanks
> I am beginning to wonder whether I am mistaken about previous treatment
> of TrackArtrist and its always been like that but a change in my tagging
> has surfaced it.
> I will ask Michael. Seems odd that a call for AlbumArtist with M/V
> returns item 1 only but a
cpd73 wrote:
> I have (AFAIK) not changed the artist code - the multi-artist string is
> from LMS, it is not me (AFAIK) specifically asking for multi-artist. So,
> AFAIK, nothing has changed. I do not get an array of artists, just a
> comma-separated string. I cant manually split this string as
philippe_44 wrote:
> Still, to your case, can you be super sure that there is no other
> controller somewhere?
I know I have the only UI for LMS open and no one else is messing with
the cast devices manually or via the Home app or their buttons, etc. I
have Node-Red and Home Assistant running
gnackwatschn wrote:
> Thank you for the fast support.
>
> Do you think it would also be possible to give us an option for using
> the slider? If you want to keep the actual default behaviour, maybe a
> checkbox in the plugin settings aka "Activate volume slider for fixed
> volume devices"
cpd73 wrote:
> For 2.2.0, I have changed the up/down volume keys to send +/-
> volume-step (e..g +5, -5) when pressed if player's volume is fixed.
Thank you for the fast support.
Do you think it would also be possible to give us an option for using
the slider? If you want to keep the actual
Jobarr wrote:
> Thanks for looking into it and for all the background information. This
> was on a 2019 Shield TV, but it has also happened with JVC and Google
> devices. I have never seen these behaviors with any other services (at
> least Google Play Music or YouTube Music) as far as I know. I
philippe_44 wrote:
> So I don't know what to say... the whole process is compliant to what is
> expected, it just seems that the CC decides to restart and his own...
Thanks for looking into it and for all the background information. This
was on a 2019 Shield TV, but it has also happened with
d6jg wrote:
> Im asking that TrackArtist be treated the same way for me but as you
> currently have it for PasTim
I have (AFAIK) not changed the artist code - the multi-artist string is
from LMS, it is not me (AFAIK) specifically asking for multi-artist. So,
AFAIK, nothing has changed. I do
Hi, for some reason the tracks stopped advancing for me. I can only play
one track and when it's time to start the next song, the playback stops
and the log is filled with these entries:
[08:03:18.911956] slimproto:889 [0x3a2e50] connected
[08:03:18.912072] sendHELO:135 [0x3a2e50] cap:
75 matches
Mail list logo
