[PEDA] Protel version 3
Has anybody had any luck running version 3 on newer machines and/or windows 2000 pro? If not, what is the latest windows version will it run on? Thanks. E-mail: [EMAIL PROTECTED] Posted from Association web site by: Roger * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Routing a big PGA part
Hello, I am looking for some info and help on a decent routing scheme for a 200+ pin PGA socket. I am using only a 2 sided board right now, but wondering if a 4 layer layout would be best. Customer wants to go low cost.. Seems you run out of routing room from the inside pins to the outside ones. Not much room to drop vias in. I thought I might have to pull out the center pins to put in vias, but run into the problems again, no routing room. Any suggestions or visual aids? Thanks from a new protel99 user! Leif [EMAIL PROTECTED] Posted from Association web site by: Leif Erickson * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] 99SE XP behaviour
Watching already at my 30-day demo of 99SE i see some problems with selecting a group of components. I use mouse to select them or use edit-select-inside area way. But it only highlights these parts optically, not really. Selecting ALL parts on PCB works fine * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] auto routing with electical limits
Is it possible to constrain auto routing of several point to point connections not only by geometric limits but also to electical requirements? The resistances of the connections are required to maintain specific ratios to each other. Regeards [EMAIL PROTECTED] Posted from Association web site by: Marko Rocznik * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Layer
Hi,
I'm trying to make rules for some type of component only route in one specific layer
(bottom or top) in a 2 side board. I'm using the InComponent('designator') function in
the advanced query and make the constraints for just one type of layer (bottom or top)
but Protel still route that in 2 two layers.
Anybody has any idea?
Thanx
Posted from Association web site by: Roger
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Employment Opportunity -- Full-time
Inet Airport Systems is looking for skilled individuals with Protel and or Inventor experience. Equally important to the success of this position are strong computer skills and strong communication skills, both in written and verbal form. If you have a positive attitude, a desire to work in a fast paced industry please contact me today!For more information call: (714) 888-2700 ext. 229 and ask for Tina Davis. Posted from Association web site by: Tina Davis * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Need to show footprint info on schematic
I would like to see my footprint info on the schematic. How do I make this field visible? kwharton(AT)pacificcrest.com Posted from Association web site by: Kevin Wharton * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Protel 99SE on WinXP?
Does anyone have any experience running Protel 99SE on WinXP? I'm curious whether it will work at all. Thanks, Vince [EMAIL PROTECTED] Posted from Association web site by: Vince Bafetti * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] c.battisti@vol.at
Can an existing OrCAD schematic be imported in PROTEL? Posted from Association web site by: Battisti Christoph * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Protel 99SE ERC
This is a little hard to explain, but here goes... I am running the ERC on a schematic in Protel 99SE. It's interesting that there isn't a rule for determining whether a port has a mating counterpart. The Orcad ERC has a place where it will verify that all off-page connectors have mating counterparts. The only thing Protel 99 verifies is that the port is connected to something electrical. If you had a port that was supposed to match a port on another page, but you mispelled one of them, had a space in one of them, etc. you wouldn't know it by using the ERC. That seems really strange to me! Posted from Association web site by: Travis * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] VSS comments
Anyone have any comments about using Microsoft VSS for controlling access to Protel DXP libraries? Ease of use/robustness etc. Many thanks Posted from Association web site by: Gwyn Roberts * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Exeption Occurred in DXP
When I try to place a track in my 99se exported PCBs in the protel DXP PCB module I have the following message : Could not convert variant of type (String) into type (Double) Exeption Occurred In ManualRoute Can someone help me ? Thank's, Olivier Posted from Association web site by: Olivier MONNIER * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] PCB Routing GND
I have not found a way yet to disable, or stop, Protel from routing GND traces. I have a GND plane and all of the components are connected to it via thermals. However, when ever I use the AutoRouter the program begins routing GND traces. I have created classes that have all the signals and trace widths associated with them but this did not help. I have disabled the system board routing layer and only enabled mine. But again that did not help. How do I stop Protel from routing GND traces when I have a GND layer that the components are already connected too? Please respond via the following email: [EMAIL PROTECTED] Thanks in advance, Brad Posted from Association web site by: Brad Epperson * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] How to place non-plated thru holes?
Hello -- I was directed to this group as the place where most Protel experts hung out. I am a newbie to Protel and am using Protel99 SE for PCB layout. My question is simple: I want to place a non-plated through hole on my design. I want to void out the plane layers around the hole also. How do I do it? It appears that I can either place a pad or a via, but neither is really a through hole, and it's not obvious (to me, at least) that they will correctly void out the plane layer. Thanks in advance for your wisdom, Stuart Posted from Association web site by: Stuart Brorson * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Schplot driver for HP deskJet 1220C
I am looking for driver for my schplot software so I can print schmatics i A3 format. HP DeskJet 1220C. Can someone help me? Per. E-Mail: [EMAIL PROTECTED] Posted from Association web site by: Per Traasdahl * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] How do I remove an Internal Plane in 99SE sp6?
Hi I've created a 6 layer board where I've used split planes on 2 internal planes for power supply. When the need came for using some parts of the power planes for normal signal routing, I've decided to use Polygon Planes on MidLayers and do the extra signal routing on the same layers. I've added 2 Mid Layers, created the Polygon Planes for power distribution and tried to delete the internal planes but ends up with the error message 'InternalPlane1 is being used and cannot be removed'. The same error message goes for InternalPlane2. The former Split Planes have been deleted successfully. InternalPlane 1 and 2 are assigned to 'No Net'. What else needs be done to delete the Internal Planes? Mikael Posted from Association web site by: Mikael Johansson * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Trace Width Charts
Hi there, I'm still a bit green when it comes to layouts. Was hoping someone more experienced could point me to some charts comparing the following: trace width vs. current capability trace width vs. standard wire gauge Do either of these exist in a easy reference place or are these numbers I need to calculate.. And if so, could someone point me down the right path of numbers? Thanks for you time and patience with my ignorance :) Keith Posted from Association web site by: Keith Michalowski * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Interested in purchasing a used 99SE floating license
We are thinking of adding another license for 99SE. Anybody that may have a fully upgradable one to sell, please respond offline. Abdulrahman, I sent an email to you but received an 'unable to deliver' message back. It could be an old address?? Thank you, Bill [EMAIL PROTECTED] Posted from Association web site by: byrdb * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] vector180w@netscape.net
Im trying to get a PCB to fit the internals of an 165x85x55 IP65 box.(its not just a rectangle) The size shape and mounting holes are allready available to me in corel draw. I have tried exporting from CD as dwg and importing to DXp with no luck(nothing seen on screen).I find DXPs CAD for making such shapes and mounting very tedious. I have tried PCB and PCB lib quickly and given up.Id hoped I could import from CD somehow. Even if its only an accurate image on a layer that I can then trace over the top of. any ideas? email: [EMAIL PROTECTED] Posted from Association web site by: vector180 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Importing other netlists into a Protel 99SE layout..
Hi there, I been digging in the docs and trying experiments to try to get an old old DOS-based Orcad netlist into my copy of Protel 99SE so at the least I can do the layout changes and not pay someone else to.. My only conclusion is that I will have to manually reformat it by hand to a Protel or Protel2 format then import it. Can someone please tell me this is not the case and advice to a more intelligent method or am I doomed to suffer the loss of income? Thanks alot for the time! Keith Posted from Association web site by: Keith * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] How to set component library properties in inner layers
Hi, I am currently doing a project on Embedded Passives. Does anyone know how do I define the component property so that I can place the comp in inner layer? As for now I could only place the comps on top or bottom side. Thanks. Posted from Association web site by: Aiza * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] TMS320C6415
[EMAIL PROTECTED] hello i am searching for the footprint (BGA GLZ-532) and symbol for tms320c4615 from Texas Instruments. who has that part already in the library (protel dxp) thanks Posted from Association web site by: daniel * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] DESIGN EXPLORER 99 SE DRILL FILES
Currently running Design Explorer SE Version 6.6.7 under Windows 2000 service pack 2. The NC Drill file (ASCII) coordinates do not match the Data Base. Is there a way to correct this? E-Mail address [EMAIL PROTECTED] Posted from Association web site by: Ron Tupa * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Employment Opportunity
We are looking for an independent EE with Protel experience for work with on-going projects. Must be in the San Diego area, and willing to do some in-house work. If interested, please email [EMAIL PROTECTED] Posted from Association web site by: Tony Schumacher * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Split plane / internal layer shortcicuit?
Hello forum members. I'm running protel 99SE sp6 I've made a +5V plane on an internal layer, using a split plane that covers the entire layer. In the middle of the layer, I'd like to place another split plane with +3.3V. Is this safe to do without risking a shortcircuit between the two split planes or would one need to create an 'inner border' for the +5V plane? How would that be done? Mikael Johansson Posted from Association web site by: Mikael Johansson * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Title block
How do a template schematic with a title block to altium Posted from Association web site by: Aurelie * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Protel 98 available
I placed my Protel 98 distribution on EBay, late last week. Anyone interested in acquiring Protel DXP, who does not have an earlier version, should find it particularly valuable. Protel is currently upgrading from 98 to DXP for $2,995. List is $7,995. Posted from Association web site by: G. A. Dissauer * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] PCB in Protel
Hi, I have a problem with PCB making in Protel DXP. The final printout appears to be for about 40% bigger. For example, I wish my PCB to have the following dimensions; width: 7cm height: 3cm but when I print it out it becomes width: 10cm and height: 6cm how come? Where is the problem? Posted from Association web site by: Raoul * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] OrCad to Protel
Hi all, I used to use Protel 99SE about 3 years ago. Then with a new job, the company has Orcad. I've been using Orcad now for the 3 years and I am absolutely disgusted with it. I'm trying to convince management to go to Protel. All I wanted to know is how everyone feels about the new Protel DXP. I really want to switch back to Protel and any info would be great! Thanks for the replies Evi Posted from Association web site by: Evi Tomaskovic * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Printed inductor
Hello, I'm seeking about a tool (a macro) for Protel 99SE SP6 that can calculate a printed inductor (square or spiral) from its inductor value and q factor... Thanks ! Posted from Association web site by: PELLIZZONI Pascal * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] CORRECTION: CAREER OPPORTUNITY FOR SENIOR PCB DESIGNER
San Diego North County Must be well Experienced using Protel Design Packages Must have Strong Electronics Background Have Management and Team Leading Experience Be Familiar with Drafting and Design Standards Salary Commensurate with Experience and Ability --- Send inquiries to: [EMAIL PROTECTED] Posted from Association web site by: Ron Beales * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] CAREER OPPORTUNITY FOR SENIOR PCB DESIGNER
San Diego North County Must be well Experienced using Protel Design Packages Must have Strong Electronics Background Have Management and Team Leading Experience Be Familiar with Drafting and Design Standards Salary Commensurate with Experience and Ability --- Send inquiries to: [EMAIL PROTECTED] Posted from Association web site by: Ron Beales * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] 1.12 under XP???
Hardlock .CDE files: ... Now, in version 1.12 this file will be identified by the Protel for Windows serial number, e.g. S1000999.CDE, etc. This system allows the access codes for each license to be kept either on the server's Windows directory, or on the node's Windows directory OK, I loaded my .cde file into C:\windows and 1.12 says hardlock device not found. Any Ideas? Trying to run this old version under XP to get back some very old files. Posted from Association web site by: patrick * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] gwilmsmeyer@ecircuits.com
I have several schematic sheets saved as filenamex.schdoc and can't get them to open in a .ddb. I get an error message not recognized. I've tried editing the extension but with no results. Please advise Posted from Association web site by: Gary Wilmsmeyer * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Find and Replace text feature for Footprint Library.
I'm a Newbie around...
Does someone have any macros or scripts which could ease out modifying the Pad
designators manually in the PCB Library of 99 SE.
For instance,I just can edit globally by coding {C1Â}for selected items in the
Schematic library. Is there a way I could do this in the PCB library as well using a
script ?
IS this feature available in Protel DXP.
Pls. advise
Posted from Association web site by: Radkrish
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] kirobutaloto@abv.bg
Hi, What is the difference between single licence and network licence for Protel DXP? Thank you Posted from Association web site by: Kiro * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Teams, Permissions and shared .ddbs
Hi Drew, I have also been doing the same as you recently and it certainly is difficult to administer. We have a similar approach to yours but with a difference. We have experimented with user permissions but haven't really used it properly except for the common library. Based on our experiance this is my suggestion to you. Since it is possible to move libraries from one ddb to another (if they are both open on the same workstation, drag and drop from one ddb to another), I suggest that each user has his own user library ddb and then have a seperate common 'read-only' library which is updated periodically making sure that the new component symbols have the right pcb footprint called up. If a new footprint is required then the user can generate one when the component symbol is generated, making sure the name given for the footprint is not already used in the common footprint library. Updating the common library should be done by one designated person who will need to be careful to verify that the new components that are added to the comman library are correct in all thier detail. When updating the common library, both the common ddb snd the user ddb are opened and the libraries are DD from the user to to common library. This will make a copy of the user ddb library in the common ddb. Then each new part in the copy of the 'user' library can be moved to an appropriate library in the common ddb, first checking and if need be, modifying, to ensure its compatibility and correctness. When all the new parts are moved over, the copy of user library can be deleted. This is the way I do it and it seems to work well. We did try modifying the common library directly but this often resulted in work being lost because of multiple users working on the comman library ddb. I hope this helps Posted from Association web site by: Tim Coleman * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To join or leave this list visit: * http://www.techservinc.com/protelusers/subscrib.html * - or email - * mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] BGA Design
Has anyone designed a fine pitch BGA, ~400pin, in Protel99SE? If so, what issues or difficulties did you encounter? Could it be done? My concern is with Protel's ability and ease of use in developing a large SMT design with BGAs, multiple via types, Via shapes, Paste mask aperatures. ie. how manufacturable the final result would be, how effective the use of design rules are Regards, Colin Weber Posted from Association web site by: Colin Weber * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To join or leave this list visit: * http://www.techservinc.com/protelusers/subscrib.html * - or email - * mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
