18-21.
> -Original Message-
> From: Michael Biggs [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 23, 2002 12:58 PM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Netlist Import take too long?
>
>
> The only problem is that Protel will add new nets
ubject: Re: [PEDA] Netlist Import take too long?
I am not positive this is the best way (or even a good way), but what I
do is:
Design/Netlist Manager/Menu/Clear All Nets
just before I do a:
Design/Load Nets
Note there is a LONG pause before the Load Nets Window comes up (10-15
seconds) but
I am not positive this is the best way (or even a good way), but what I
do is:
Design/Netlist Manager/Menu/Clear All Nets
just before I do a:
Design/Load Nets
Note there is a LONG pause before the Load Nets Window comes up (10-15
seconds) but much less than the 25+ I have seen waiting w
Good point. But, I have no polygon pours, but I do have internal
power/ground planes. 6 layer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 23, 2002 11:11 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Netlist Import take too long?
In a message
Does anyone use a third party schematic capture program then import the
netlist each time to Protel99SEsp6? Well I do and it works great always has.
The problem I'm having is that some of the more sophisticated boards netlist
take 10-15 minutes to load each time I need to import a new netlist due