Thank you Marcel! Really good news.
I am using QL-SD adapter since quite a lot of time and it is
definitively an important upgrade for the BBQL
I am not sure if I understood well and you will produce some units by
yourself, In case yes I will be delighted to have one board (may be 2
:-):-)..
Dave Park via Ql-Users wrote:
> This is amazing work!
Thanks.
> It also means I can stop my occasional work on my QL-SD version. I have no
> desire to sell a QL-SD into a crowded marketplace.
>
> Instead, I'd like to buy one for compatibility testing on Issue 8.
We can certainly arrange somethin
Peter Graf via Ql-Users wrote:
>> As far as I could gather in my limited tests, INGOT 5 never worked
>> (which includes the Tetroid) and INGOT 6 worked or at least mostly
>> worked.
> That makes me a little sceptic, because I have one labelled "INGOT 5"
> which worked (with the original driver and
Am 30.03.2018 um 00:47 schrieb Marcel Kilgus via Ql-Users:
> Peter Graf via Ql-Users wrote:
>> Did you test your logic changes with a non-Tetroid GC inside a QL where
>> the original logic did *not* work reliably?
>>
>> I'm asking, because IIRC you reported total failure of the original
>> logic wi
Peter Graf via Ql-Users wrote:
> Did you test your logic changes with a non-Tetroid GC inside a QL where
> the original logic did *not* work reliably?
>
> I'm asking, because IIRC you reported total failure of the original
> logic with the Tetroid GC, while my experience was, that non-Tetroid GC
>
Am 29.03.2018 um 23:29 schrieb Marcel Kilgus via Ql-Users:
> Speaking of only announcing stuff that basically already works, I have
> made huge progress regarding my work on QL-SD that I was going to
> write about today anyway:
>
> https://www.kilgus.net/2018/03/29/ql-sd-news/
Must have been a lo
Awesome!You are the best!
2018-03-29 23:43 GMT+02:00 Graeme Gregory via Ql-Users <
ql-users@lists.q-v-d.com>:
>
>
> On Thu, 29 Mar 2018, at 10:42 PM, Dave Park via Ql-Users wrote:
> > A Lattice JTAG programmer is all.
> >
> I have a couple of FTDI JTAG doodats, but no specific Lattice one.
>
> Gr
On Thu, 29 Mar 2018, at 10:42 PM, Dave Park via Ql-Users wrote:
> A Lattice JTAG programmer is all.
>
I have a couple of FTDI JTAG doodats, but no specific Lattice one.
Graeme
___
QL-Users Mailing List
A Lattice JTAG programmer is all.
On Thu, Mar 29, 2018 at 4:41 PM, Graeme Gregory via Ql-Users <
ql-users@lists.q-v-d.com> wrote:
>
>
> On Thu, 29 Mar 2018, at 10:29 PM, Marcel Kilgus via Ql-Users wrote:
> > Speaking of only announcing stuff that basically already works, I have
> > made huge prog
On Thu, 29 Mar 2018, at 10:29 PM, Marcel Kilgus via Ql-Users wrote:
> Speaking of only announcing stuff that basically already works, I have
> made huge progress regarding my work on QL-SD that I was going to
> write about today anyway:
>
> https://www.kilgus.net/2018/03/29/ql-sd-news/
>
> Hope
This is amazing work!
It also means I can stop my occasional work on my QL-SD version. I have no
desire to sell a QL-SD into a crowded marketplace.
Instead, I'd like to buy one for compatibility testing on Issue 8.
This lets me focus on other projects that I have been neglecting this last
month,
That is great news Marcel :)
Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com
On 2018-03-29 22:29, Marcel Kilgus via Ql-Users wrote:
Speaking of only announcing stuff that basically already works, I have
made huge progress regarding my work on QL-SD that I was going to
write
Hi,
thanks, Kenn, Lee, Ian.
>From my side, QL-SD was purely a charity project. I'm not involved in any
commercial aspects. So except from seeing that the work of Adrian and me
is useful for a few QLers, it won't change much if I read this here.
If you like, maybe one of you can collect emails
ps in gaining a measure outside Germany, I would be interested in
>> 2/3 QL-SD units.
>>
>> Ian Burkinshaw
>> - Original Message - From: "Peter Graf"
>> To:
>> Sent: Wednesday, December 04, 2013 5:56 PM
>> Subject: Re: [Ql-Users] QL-SD N
-- From: "Peter Graf"
> To:
> Sent: Wednesday, December 04, 2013 5:56 PM
> Subject: Re: [Ql-Users] QL-SD News
>
>
>
> Francois Lanciault wrote:
>>
>> Looking forward to an official news with price and availability.
>>>
>>
>>
Two third of a unit !! :-)
De: Ian Burkinshaw
Envoyé: mercredi 4 décembre 2013 17:02
À: ql-us...@q-v-d.com
Répondre à: ql-us...@q-v-d.com
Objet: Re: [Ql-Users] QL-SD News
Hi Peter
If it helps in gaining a measure outside Germany, I would be interested in
2/3 QL-SD units.
Ian Burkinshaw
Hi Peter
If it helps in gaining a measure outside Germany, I would be interested in
2/3 QL-SD units.
Ian Burkinshaw
- Original Message -
From: "Peter Graf"
To:
Sent: Wednesday, December 04, 2013 5:56 PM
Subject: Re: [Ql-Users] QL-SD News
Francois Lanciault wrote:
Francois Lanciault wrote:
> Looking forward to an official news with price and availability.
At the moment QL-SD is only available within Germany, orders through the
German QL Forum. Current price is EUR 60 including a preformattet SDHC
card, Minerva operating system and drivers EPROM, Microdrive
Looking forward to an official news with price and availability.
François
De: Lee Privett
Envoyé: mercredi 4 décembre 2013 10:50
À: ql-us...@q-v-d.com
Répondre à: ql-us...@q-v-d.com
Objet: Re: [Ql-Users] QL-SD News
Totally agree, excellent work and exciting to say the least.
On Wed, Dec 4
Totally agree, excellent work and exciting to say the least.
On Wed, Dec 4, 2013 at 9:58 AM, Dave Park wrote:
> Cool! Excellent work!
>
> Dave
>
>
> On Wed, Dec 4, 2013 at 3:40 AM, Peter wrote:
>
> > Hi,
> >
> > the restriction that a QL memory expansion is madatory for QL-SD has been
> > remo
Cool! Excellent work!
Dave
On Wed, Dec 4, 2013 at 3:40 AM, Peter wrote:
> Hi,
>
> the restriction that a QL memory expansion is madatory for QL-SD has been
> removed.
>
> If a QL-SD filesystem of 3 MB size (and Groupsize 8) is attached, there
> still remains 62.5 KB free memory on an unexpande
21 matches
Mail list logo