Hi all,
I have installed AutoTURN and serial mail
I have not quite understood the instructions in serial mail
and I see different usages on this list mentioned by Dave and others
Could you kindly indicate where I can get a lwq or HOWTO on serial mail.
Thanks
Jacob
Hi all,
I have a strange problem on my serial mail,
It was working well and now suddenly it gives this error
on my client side (narada.col7.metta.lk)
#!/bin/sh
PATH=/var/qmail/bin:/bin:/usr/bin:/usr/local/sbin:/usr/local/bin
export PATH
/usr/local/bin/maildirsmtp ~alias/pppdir alias-ppp
Hi Dave,
My script to activate the sending of mail over the serial link
is like this:
Please let me know if you see any errors.
/mail-out
---
#!/bin/sh
PATH=/var/qmail/bin:/bin:/usr/bin:/usr/local/sbin:/usr/local/bin
export PATH
/usr
link
is like this:
Please let me know if you see any errors.
/mail-out
---
#!/bin/sh
PATH=/var/qmail/bin:/bin:/usr/bin:/usr/local/sbin:/usr/local/bin
export PATH
/usr/local/bin/maildirsmtp /var/qmail/alias/pppdir alias-ppp
Hi all,
I have qmail working quite satisfactory
with help from lwq and all of you.
I have now made 2 accounts
[EMAIL PROTECTED]
[EMAIL PROTECTED]
and have now found that
mail to the account [EMAIL PROTECTED]
goes to the account [EMAIL PROTECTED]
Is qmail not case sensitive ?
or is it linux
Hi all,
I run a freemail domain in Sri Lanka called "metta.lk"
with a few sub-domains for mail.
We would like to put a notice at the buttom of all mail
passing our server
How do I do that in qmail.
Thanks in advance
Jacob
On Sun, Sep 19, 1999 at 12:56:45AM +0200, LRiva wrote:
Hi Lorenzo,
I have two rather stupid questions as I'm a newbie with Qmail.
I've just installed Qmail and set it to use maildir-like mailboxes.
The question is:
Mutt ask me to specify a file to use as spool mailbox: how should I set
ppp link
|
col7.metta.lk
172.16.1.1
when I invoke the ppp connection from the subdomain then mail goes out to
"metta.lk" for delivery.
but the AutoTURN connection is not made
I see mail in /var/qmail/autoturn/new/
I see a
Hi all,
I have set up Qmail on "metta.lk" (204.143.107.46)
and use autoturn to get my mail to "col7.metta.lk" (172.16.1.1)
Everything works quite well.
To some domains I get messages like the below returned by Mailer Daemon.
Is this a DNS problem on my machine
or is it b
I tried putting this script in inetd.conf file to start the tcpserver service
but I dont seem to be starting the service. I am using Red Hat 6.1
tcpserver 0 110 /var/qmail/bin/qmail-popup domainname \
/bin/checkpassword /var/qmail/bin/qmail-pop3d Maildir
tcpserver -c 400 -v
On Sun, Nov 14, 1999 at 10:01:29PM +0100, Nagy Balazs wrote:
Hi
I have set up Qmail on "metta.lk" (204.143.107.46)
and use autoturn to get my mail to "col7.metta.lk" (172.16.1.1)
Everything works quite well.
This is not true. You assigned a local IP address to y
error also.
I cannot understand what I should do to correct this.
I thank you for your help
Jacob
-
Hi. This is the qmail-send program at metta.lk.
I'm afraid I wasn't able to deliver your message to the following
addresses
On Tue, Dec 07, 1999 at 06:20:34PM +0800, [EMAIL PROTECTED] wrote:
Hello,
2. I'd like to make a copy all incoming email of a user account to another
user account. Is it possible to do that at qmail? How it works? I have
tried to make an entry at .qmail file to forward the mail, but no mail
// This is a problem. You have to erase the A record from the outer
// metta.lk zone. That server can store all messages which come to col7 to
// a folder (ie. ~alias/172.16.1.1/), but qmail doesn't have to have that
// dns entry.
Thank you very much for your answer, and sorry for the long silence.
We
hi all!
i've got troubles and a question :)
i can't manage to install procmail. currently i am using qmail-local to
deliver mails. i also use the /Maildir format and vpopmail. i couldn't find
a howto or documentation how to install procmail with
qmail+maildir+vpopmail. hope you can help me!
thx
customer has
configured and started an Notes smtp-mta for generic smtp
mailservices. A Problem regarding this solution would be that
Notes will send all outgoing mail directly with queuing it for a later
delivery!
It would be a good idea using a small Linux-Box at the customers
side running qmail
.
It would be a good idea using a small Linux-Box at the customers
side running qmail (as mail-proxy), and for dail-up/serialmail.
Perhaps you should also add an HTTP-Proxy as special service for
new customers ;-
- Roland
Hi all,
I am sorry to present a Non qmail on this list.
I need a few Windows Mailing lists.
Purpose: I need to find out where to buy
some cheap licenses for Windows/Word/Office etc.
Thank you for tolerating this on this list
Jacob
--
Random Dhammapada Verse 156
They who have not led
I am a Buddhist monk, and my daily duty is to encourage persons
not to "kill" "steal" etc.
so how can I run unlicensed software (double morals, isn't it)
I run a number of "free mail servers" in Sri Lanka,
all of them have Linux and qmail,
but we also need Wind
Dear "David Harris" [EMAIL PROTECTED]
Sorry for the rather late reply to your help on my mail footer.
I run Redhat 6.0 and am using Dave's LWQ for my setup.
I did the patch to qmail as per your email but I get no footer on the
mail. Your advice on where to look for errors is much a
hi all!
can someone please explain how to install the open-smtp4.tar.gz from russ
nelson?
thx in advance
greets, michael
On Thu, Jan 06, 2000 at 10:10:31AM -0500, Russell Nelson wrote:
Hi,
I user ~/Maildir/
and qmail-pop3d
man qmail-pop3d did not give me the details of how to send mail to all
users. Is there a small description somewhere else.
qmail-pop3d is based on a program contributed by Russ Nelson
Hi Folks,
I'm wondering the best place/way to log details about each email to a
database of some sort.
Specifically I need to log, from address, to address, and email size.
Any hints on where to start?
Thanks,
Lance
Hi Folks,
I'm curious if I need this patch on RH 6.1 or higher?
Thanks,
Lance
Hi Folks,
I'm trying to put together a solution for a custom application for a
client.
Essentially for each email sent I want to generate a confirming email
back
to the sender and to a third party with date, time, and file size. I
need
this to occur immediately and automatically.
Any
Hi,
I just installed qmail for the first time and I am having problems
finalizing the installation.
I checked the FAQs and they helped me solve some of the issues, but there
is still one that is bugging me and I bet you it's a stupid one...
I am trying to use Maildir for mail delivery.
I
Hello,
I am using qmail with Mailbox instead of Maildir.
Sending and chekcing mail locally using elm, mail, pine etc works great.
But when I connect via ipop3d it always tells me that I have no mail.
It is reading from /var/spool/mail as oposed /home/user/Mailbox.
So I was going to install qmail
Hello,
I have come down to my last obstacle.
Sending mail remotely.
The machine name where I isntalled qmail is mail.stgo.cl, stgo.cl resolved
to another IP.
When I try to send an email to a remote host I get the following:
/home/miturbe: telnet 0 25
Trying 0.0.0.0...
Connected to 0.
Escape
Hi,
any results on the below questions from the qmail list? I feel like I'm
experiencing the very same behaviour in my test environment. But IMHO
not necessarilly related to NFS or Solaris (same with linux). Both POP3
and SMTP seem to be affected.
TIA
/ekki
blush
power saving...
digging in the ground
sorry for the disturbance...
/Ekki
On Fri, 19 May 2000 03:11:43 +0200, qmail wrote:
Claudio,
sorry, detailed information will take some more time (we are trying to
track down things as exact as possible).
For now:
- patch is qmail-ldap-1.03
On Thu, May 18, 2000 at 11:57:31AM +0100, [EMAIL PROTECTED] wrote:
Hi,
I have been on this list for about a year,
and it has made a very good book on Qmail by now.
Jacob
Can anyone recommend a good all round book for qmail?
Hi all,
I run a local free pop server
and would like to insert a footer on the mail.
I have followed Dave's LWQ to the letter in my setup
and qmail works fine for about a year.
I tried to use the patch for inserting a footer in qmail
written by David Harris.
I have compiled qmail
Hi
I would like to limit some of my users to file seizes not above 1 MB
How do I implement that.
Thanks
Jacob
On Sun, Jul 02, 2000 at 07:51:00AM +0200, Steffan Hoeke wrote:
I would like to limit some of my users to file seizes not above 1 MB
How do I implement that.
man qmail-smtpd:
databytes
Maximum number of bytes allowed in a message, or 0
for no limit
Hi Folks,
I'm looking for a GNU/GPL/Freeware email management package that is "happy"
with Qmail.
Specifically, I need to be able to send emails to 100,000+ "subscribers" on
a weekly basis.
I'd also like to be able to automatically remove bounces, support
blacklists, etc.
Hi all,
I am running a free popmail server using Autoturn and getting my mail via
a dialup link from my mail server metta.lk to col7.metta.lk and things
are working well for the larst year or so.
I find that qmail is taking my maildir and sending last in first out
I would like to have qmail
# this will move large messages to the /var/qmail/alias/pppdir2 directory
find /var/qmail/alias/pppdir/ -size +30 -exec mv {} /var/qmail/alias/pppdir2/new/ \;
# This will send and recive mail the moment the ppp connection is up
# To close the ppp connection when there is no more activity.
# you put idle
On Tue, Aug 08, 2000 at 05:05:21PM +, David L. Nicol wrote:
I recall from an earlier discussion of a similar problem that a
perceived consensus was reached that a good way to do this kind
of thing is to patch qmail-remote so that if
the message is too big to send, it appears
interesting.
If anyone of you remember what to seach for then I shall search the
archives.
Perhaps I could search the body of text for qmail-remote ?
Sorry for that one.
That was not possible, I got far too many entries.
I should have checked before sending.
Any guess would be useful,
I have
), and
download mail that's waiting to be transferred to that location.
Have a look at autoturn at the qmail website
we use that and are quite satisfied with that.
Mail is sent and got while phone prices are low.
using cron to send and receive mail.
Jacob
--
A saying of the Buddha from http
Hi Folks,
I'd dearly love to add Virus and additional spam filtering to our mail
systems.
Our problem is, many moons ago we hacked vmailmgr to allow our customers web
based control of email for their domains, etc.
So we now have multiple servers running Qmail 1.01, hacked vmailmgr, pop
before
Hi all,
I have installed qmail, sqwebmail, vpopmail, vqsignup.
My machine name is "mail.metta.lk"
The installation has been done on a Redhat 7.0
and sqwebmail is in the dir /home/vpopmail/
I have generated the domain name "metta.lk" in the dir below using the
given prog
On Tue, Dec 12, 2000 at 11:24:55AM -0600, Charles Cazabon wrote:
I have installed qmail, sqwebmail, vpopmail, vqsignup.
My machine name is "mail.metta.lk"
[...]
I have generated the domain name "metta.lk" in the dir below using the
given program.
/home/vpopm
On Tue, Dec 12, 2000 at 01:52:14PM -0500, Tim Hunter wrote:
First Excuse my Outlook 2000, corp standard.
The only files you need to be concerned with for virtual hosts using
vpopmail:
/var/qmail/control/rcthosts
metta.lk
/var/qmail/control/virtualdomains
metta.lk:metta.lk
/var/qmail
On Sat, Feb 07, 2037 at 04:58:02AM -0500, Aaron Carr wrote:
Does anyone know anywhere to find or happen to have any RPMs for the Inter7
programs QmailAdmin, and vpopmail? I have an RH 7 server, and the Inter7
programs don't seem to want to install in their current format. I keep
getting
On Tue, Jan 09, 2001 at 11:00:08AM +0100, Johan Almqvist wrote:
On Mon, Jan 08, 2001 at 03:34:17PM -0600, David L. Nicol wrote:
if you don't mind jamming it on at end of MIME,you could open up qmail-remote
and stick it within blast(), like this:
char *Footer = "\r\nAlm
I would think someone skilled enough to run a SMTP server would know how
to unsubscribe from a mailing list.
With ezmlm-style lists, you send mail to [EMAIL PROTECTED]
In this case, that would be [EMAIL PROTECTED]
- Sam
unsubscribe [EMAIL PROTECTED]
surprised that you can not put the mess directory back in at
/var/qmail/queue/mess, then restart qmail. This should restore things
back to a chugging normal pace.
Anyway, I really hope there'll be some way to save some of the Email (try to
pull the To: info out? )
Ugh, if you have completely
I read in a howto that you should link the old sendmail scripts in
/usr/sbin/sendmail to /var/qmail/bin/sendmail, but i havent got any sendmail
scripts under /var/qmail/bin/... Is this right?
Actually, you should have /usr/sbin/sendmail (and, while you are at it
/usr/lib/sendmail) both
a rude note about how
terrible Qmail is. Doesn't matter what you say, as long as you say it to
[EMAIL PROTECTED]
Well my answer to this is "don't use qmail"
This note from Patrick intrigued me. It intrigued me because I remember
myself being so frustrated with Qmail, I cursed and said
On Thu, 25 Jan 2001, Markus Stumpf wrote:
If AOL or hotmail would decide to change their MX records to your mailserver
this will for sure also cause you problems.
Actually, Qmail works fine as an incoming MX for Hotmail.com.
mail.hotmail.com, one of Hotmail's incoming mx machines, runs Qmail
deliveries, so it hangs around in the
queue for too long.
I have had emails that took literally a month to get delivered. It was
nice that Qmail kept the message in the queue that long, since the message
would have not been delivered to him if I was using a MTA that gives up
after five days.
The
On Fri, 26 Jan 2001, Virginia Chism wrote:
"Life with qmail"
I have seen this mentioned several, times lately. Where can I find this
document?
http://www.lifewithqmail.org
And, oh, while I am here, I would like to inform everyone that, to
unsubscribe from the list, send email
Hi,
Where is the tcpserver config ?
Can you help me tou configure this ?
Thanks
Look at the documentation for tcpserver, which is part of the ucspi-tcp
package. http://cr.yp.to has a link to the ucspi-tcp documentation.
- Sam
On Sat, 27 Jan 2001, Peter van Dijk wrote:
The mail.hotmail.com that I just telnetted to on port 25 did not
except this shortened version. It was also completely unsimilar to
qmail-smtpd.
Hummumph. Thanks for pointing that out.
I think we have caught hotmail.com in the act of changing
I have add a 'vmailmgrquotas' file in /var/qmail/control/
What have I to do to made qmail read this file ?
whitch daemon must be restarted ?
qmail-send needs to be restarted. e.g.
kill -HUP 186
or
kill 186 ; /var/qmail/rc
- Sam
186 ?S 0:00 qmail-send
Hi all,
I have tried to implement adding a footer to my outgoing email messages
the messages are standard text files with lines over 100 letters
When trying to send the mail out using serialsmtp I get the following
errors.
serialsmtp: fatal: SMTP cannot transfer messages with partial final
Any suggestions are appreciated.
We are looking for some way to help out a few dozen exchange customers while
northpoint is down.
Thanks.
Lance
I'm looking to upgrade our existing hacked qmail system.
We running v1.02 with a custom web interface to a virtual mail manager.
It works great. But the code requires an IP per domain to do POP.
I know there are other options at this point, and I'd like not to be the
only one maintaining
Hy all,
I need to redirect all unrecognized messages for a virtual domain to a
directory where another program(maildirsmtp) will catch it and send it to
another mailserver.
To let the unrecognized messages into the specified directory, i'm using
the following .qmail-default command line
Thank you, it's working fine!
Markus Stumpf escritas:
On Thu, Apr 26, 2001 at 06:04:36PM +, qmail wrote:
OH, do you know the variable name wich refers to the qmail-local messages
names? If I use the same name that qmail-local uses I wouldn't have name
collisions, right
I'd like to ask you: is this procedure dangerous? There is the
possibility
of loosing messages, receive attacks, or something I can't imagine now?
Yes. You said $$ was the PID; that can wrap (especially if you're on a
system
with 15- or 16--bit PIDs), and you get a filename
OH, do you know the variable name wich refers to the qmail-local messages
names? If I use the same name that qmail-local uses I wouldn't have name
collisions, right?
Is it possible?
Charles Cazabon escritas:
qmail [EMAIL PROTECTED] wrote:
I need to redirect all
Hi all,
1. I need to get qmail-lspawn to deliver into
/var/qmail/alias/local/Maildir/new/
2. My footer program will identify the type of message,
add the appropricate footer and feed the mail into
/var/qmail/alias/local.footer/Maildir/new/
3. I need next to feed the mail from
/var/qmail
Is it possible to script qmail-inject to send a full bodied message from the
command line?
I'm trying something like this:
( echo to: alerts@XYZnet ; echo from: [EMAIL PROTECTED] ; echo subject: logs ;
grep '@customer.com' /var/log/qmail/* ) | /var/qmail/bin/qmail-inject
I get the header, ok
i m looking for an RPM of a web based mail client for qmail which will work
on redhat 7.1. i have q mail running on it perfectly.
is there any website to check mails of a pop3 account similar to
mail2web.com
Best Regards,
Arun Hubballi,
hi friends,
i m new to qmail or any mail server.
i want to forward mails from one account to multiple accountshow do i do
it
what are .qmail files
secondly i want to know about ~alias and .qmail files where can i get
detailed help on this.
Best Regards,
Arun Hubballi
hi friends,
i m new to qmail or any mail server.
i want to forward mails from one account to multiple accountshow do i do
it
what are .qmail files
secondly i want to know about ~alias and .qmail files where can i get
detailed help on this.
best regards
arun hubballi
hi friends,
i m new to qmail or any mail server.
i want to forward mails from one account to multiple accountshow do i do
it
what are .qmail files
secondly i want to know about ~alias and .qmail files where can i get
detailed help on this.
best regards
arun hubballi
hello friends,
i m using a redhat 7.1 system, with qmail installed on it. qmail is working
perfectly.
The pop3 clients like outlook express takes a long time to
connect and respond. also when i telnet to this server on port 110 or 25 or
to port 23 it takes a long time for the prompt to appear
i have qmail installed and working on my server. when i m trying to send a
mail using the smtp server i get the message attached below. i have
mail.ccipl.com and ccipl.com added to the rcpthosts, locals, plusdomain and
me. what could me the problem. what changes should i make to get it working
i tried installing Bruce Guenter,s auto responder and added an entry in the
.qmail file for some users as per the instruction given on the site. but the
responder is not working.
can any one explain how exactly to use the auto responder. how to configure
it.
best regards
Arun Hubballi
Hi,
Sorry, in advance if this is a little off-topic but..
I have two qmail installations, one is my main system with POP and
SqWebmail and suchlike. Its been running for agaes and works great.
I recently set up a second totally basic qmail installation intented for
sending only
Mmmm...
A typical bounce message looks like this...
Hi. This is the qmail-send program at mms-research3.marketingms.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
[EMAIL PROTECTED
I would be EXTREMELY surprised if this is down to qmail!
Have you posted your question on an Outlook newsgroup?
Cheers.
Philip N. Han writes:
Hi,
We have over 800 members and sent out newsletters using the Bcc function
within Microsoft Outlook via qmail server.
Up to three weeks
Hi,
Anybody think of a way of blocking ALL email attachments to a particular
virtual domain. My other domains should receive them as normal.
The messages to the domain in question are large in volume, processed
automatically, and plagued by virus files. Simply blocking mail with
attachments
Hi,
Anybody care to recommend a good setup for scanning messages going through
qmail for viruses.
I see in the qmail website add-ons for doing this which obviously attach to
an existing virus scanner.
Has anybody actually done it, and so can recommend a working setup?
Thanks
I am running qmail on redhat 7.1. qmail is working fine. outlook is used to
fetch mails via pop3.
when i restart the server, qmail smtpd gives a problem.
while sending a outlook says connecting and waits without any action.
when i telnet to port 25 on the server it again dosent reply.
when i do
Hi all,
I'm having trouble getting forwarding to work. I have a
virtual domain for which I want all mail to use the aliases
database.
versions:
qmail-1.03
fastforward-0.51
settings:
qmail/control/rcpthosts:
tmpsj.org
qmail/control/virtualdomains
tmpsj.org:alias
Sorry but GIMP does not even compare to Photoshop 6
just my .002 and yes i use both on a daily basis for both digital and print
solutions.
Jps
Smithj writes:
Use GIMP :)
(unix or windows based)..
I'm in the same boat with all the bookkeeping and office stuff that I have to deal
can .forward remain a copy to original user email maildir?
what is the difference between
[EMAIL PROTECTED]
[EMAIL PROTECTED]
in .forward file?
Q1.) I am setuping with Mandrake 8.0 kernal 2.4.3, how can I remove all
postfix?
Q2.) Should I stop all the pop3 and IMAP service in Xinetd?
Q3.) I should use courier-imap and qmail-pop3?
Q4.) I have many existing email account with user name like
[EMAIL PROTECTED] is it ok?
Q5.) Is it I should
I tested the qmail delivery by:
echo to: user | /var/qmail/bin/qmail-inject
then I find a queue in ~user/Maildir/new/
when I add a .forward file under ~user with content:
someone@localhost
and do the delivery test again :
echo to: user | /var/qmail/bin/qmail-inject
it still have a queue
Brett Randall wrote:
On Thu, 09 Aug 2001 21:24:52 -0400, qmail [EMAIL PROTECTED] said:
Great, it works, I forward to [EMAIL PROTECTED] la, but what
problem I have in setup .forward? I don't have any error message I
still can't forward the message by dot-forward
What do your logs
Hi Folks,
Is there any way to use rblsmtpd to simply set a header in qmail, rather
than bouncing emails?
Thanks,
Lance
After I test the qmail-smtpd and qmail-send is ok,it seems to me ok.
I try to install qmail-pop3d and start this service.
I add the run script in /var/qmail/supervise/qmail-pop3d
I use the method to test the checkpasswd program, the response is ok.
#!/bin/sh
exec /usr/local/bin/softlimit -m
Can qmail manager each outgoing email?
if yes,then how to manager each email account that will send a copy of
message to his/her manager?
I have about 50 users and they are in 5 groups.
I want to copy each group user outgoing message to their manager like a cc /bcc message.
I already compile qmail with extra.h. and see the FAQ of administration part,
but I still don't know how to make each email message in individual files like
Hello right now I start qmail with csh -cf '/var/qmail/rc ' 1 /dev/null
and tcpserver -x /etc/tcp.smtp.cdb -u1003 -g102 0 smtp
/var/qmail/bin/qmail-smtpd
this is what I have in my /etc/inittab file:
qm:123456:respawn:/usr/local/bin/tcpserver -x /etc/tcp.smtp.cdb -u1003
-g102 0 smtp /var
Hi
Though my topic has been discussed n times on list
I get to know that for a millions users yu should
netapp/nfs storage talking to many frontends which may
be one or two smtp and/or pop and/or imap servers
talking to the same mailstore(netapp)
My doubt is to is there a certain metric where yu
I'm looking for a way to let my vmailmgrd users to read their
mail using IMAP (for example via imp). Is there a way to make this
work ?
Why isn't there and standard imap client with qmail ? Would it
be so difficult to programm ? :)
Cheers,
Olivier
Hello world,
Actually, I'm using qmail on a few classic internet servers
(direct connected to the net, access via pop), and I'm _Very_
happy of it.
Now, I have to do something more complex, and I'm looking for
some advices oder places to RTFM : if you have an idea, please
mail me!
Situation
I'm looking for something (patch?) against Mailbombs (for example:
more than 100 mails for the same recipient during a definied time).
Does such a thing already exist ? Thanks for any pointer... :)
Cheers,
Olivier
peakimpact user:
.qmail-vpl
.qmail-ajr
Inside these files I have put the following:
[EMAIL PROTECTED]
and
[EMAIL PROTECTED]
respectively. Am I correct so far? I want also for these users to able
to send mail to other people without those people seeing anything to do
with cyberscapes.com.au.
Say if a user has 2 or 3 mail accounts and only one is the primary account
that he checks every day. Is it possible to get qmail to send the user
notification of new e-mails when they arrive in his other 2 accounts? I
assume some command would have to go into the .qmail file in the home
Has anyone ever used David Summers' IMAP/POP server RPM? There doesn't
seem to be any docs on the web site, does anyone know where I could find
some?
Vivian Lal
I am having some difficulty starting my pop server. Could someone give me
an example of what type of syntax they use to start the qmail pop service?
Regards
Vivian Lal
It is my understanding that is it neither necessary nor desireable to do a
remote host lookup on each incoming mail item. However, I have tried to
start qmail-smtpd under tcpserver with both the -H and -R options, as well
as a combination of both. Still, identd is trying to do a remote lookup
On Thu, Dec 02, 1999 at 01:10:16PM +, Sam mentioned:
Did you strictly follow the hints given
at URL:http://www.inter7.com/courierimap/README.imap.html
on how to configure Netscape for IMAP? Works for me (modulo
creating subfolders, but thats a Netscape bug).
Creating or deleting
-BEGIN PGP SIGNED MESSAGE-
I cannot seem to search the archives to see if this has been discussed.
There used to be a control file called recipientmap that is not there
anymore. I recall someone commenting that people were using it as an
aliases file instead of using the .qmail
1 - 100 of 922 matches
Mail list logo