On Fri, August 24, 2018 12:03 pm, Daniil .Travnikov wrote:
> On Friday, August 24, 2018 at 6:08:54 AM UTC-4, awokd wrote:
>
>> On Fri, August 24, 2018 9:53 am, Daniil .Travnikov wrote:
>>
>>> I have an LTE USB Modem which I used in Qubes 3.2 very well, but in
>>&
ftware is my first
> goal. I want to orient at this guide
>
> https://github.com/Qubes-Community/Contents/tree/master/docs/user-setups/
> taradiddles
>
> Sure i can do all of this manually as described here:
> https://www.qubes-os.org/doc/templates/fedora-minimal/
>
>
vo T580.
>
> I did install them by issuing the commands from dom0:
>
>
> sudo qubes-dom0-update --enablerepo=qubes-dom0-security-testing
> kernel-latest
>
> and
>
> sudo qubes-dom0-update --enablerepo=qubes-dom0-security-testing
> kernel-latest-qubes-vm
>
> After the
Hola Qubers,
For stream-lined management and ease of updating I wanted to implement the
following Qubes hierachy:
1) Official FC28-minimal TemplateVM from qubes-itl-templates repo
2) 'FC28-base' TemplateVM, a clone of 1)
With same small adaptations
3) 'FC28-$ROLE': TemplateVM which uses 2
network through USB3
> > docking station (no improvement on both topics). It's a Lenovo T580.
> >
> > I did install them by issuing the commands from dom0:
> >
> >
> > sudo qubes-dom0-update --enablerepo=qubes-dom0-security-testing
> > kernel-latest
> >
On Mon, August 27, 2018 2:02 am, averyfuentes9rs via qubes-users wrote:
> Hola Qubers,
>
>
> For stream-lined management and ease of updating I wanted to implement
> the following Qubes hierachy:
>
> 1) Official FC28-minimal TemplateVM from qubes-itl-templates repo
> 2
On Sat, August 18, 2018 3:16 pm, myblackcatisb...@gmail.com wrote:
>
> Hello my dears,
>
>
> My Qubes Windows7 HVM runs without any problems so far.
>
>
> Since I would like to install some programs under Windows7 64Bit Pro,
> which required a good graphics performan
age because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on th
ned the same in qubes though. And I noticed in dmesg for
> dom0 a message during systemd[1] bring up that says ‘Failed to start Load
> Kernel Modules.’ (It’s the only message in red).
You can ignore that error message. You were testing those templates out
while running one of the older kernels,
-
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com
ow to clear these dialog boxes of the
>> appvm names that are saved in them.
>>
>>
>>
>>
>> CuBit
>>
>>
>
> And it's Qubes 4.0 ?
>
>
> In 3.2 I remember a problem like this , I recall someone in here,
> probably Taske
On Fri, August 17, 2018 12:54 pm, Aliaksandr Kavaliou wrote:
>
>
> Hey Guys!
> after some time i installed Qubes 4.0 and here the usb-proxy goes over the
> grafic icon. But i still can not run my webcam Logitech C920. I attach it
> to the webcam-VM, run the software (to
whonix.org/t/cant-update-whonix-templates/5631. The "does
no longer have a Release file" error means that repository is in process
of being updated with new content, and to try again later. You may see
this error with any Debian style repository.
--
You received this message because
On Fri, August 17, 2018 2:26 pm, Marcus Linsner wrote:
> Was this the second version:
> https://groups.google.com/d/msg/qubes-devel/fsIAQO1xFkU/u1C61kxCBgAJ ?
> that is: https://github.com/raffaeleflorio/qubes-url-redirector I ask
> because it says: "Furthermore, through context
er?
> ==> Q3 How do I create and use a kickstart file?
These are good questions, but I don't know the answers!
> ==> Q4 I presume Qubes should work fine with my configuration?
There are a handful of people who got it running on Ryzen so it's probably
a question of if the motherboard/B
On Fri, August 17, 2018 3:01 pm, Ole wrote:
> Hi everyone,
>
>
> I have a new XPS 9570 i9 laptop and I'm trying to install Qubes 4.0 on
> it.
>
> I have the installer on a USB stick and when I boot from it, briefly some
> text shows up in the upper left corner
headphones does not help.
Check the Configuration tab all the way to the right, too. If that still
doesn't help, and you have more than one output device listed, try to
disable the ones you aren't using completely. That said, I had one AMD
card where HDMI out worked with Qubes, and another model t
eived this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view
can
> run now. So the problem was probably in the more recent Linuxes and
> finally not with Xen. I’ll explore that.
>
> Thanks again for your help.
Glad you were able to get it back up and running!
--
You received this message because you are subscribed to the Google Groups
Hello,
Could someone post a video for NitroKey disc encryption setup with Qubes OS?
hsk tek
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to q
the key that comes with it from torproject.org and import it
> into Whonix it'd still be the same, expired, key anyway?
Not exactly a Qubes issue, but you could temporarily set the date back a
couple weeks in the template then update-torbrowser.
--
You received this message because you are sub
ecause you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on
before qvm-block attaching it somewhere else.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
://github.com/QubesOS/qubes-issues/issues/3689
https://github.com/QubesOS/qubes-issues/issues/3705
In any case, I'd be interested to hear the details of your workaround.
> I have the high-res screen and text is pretty small. Haven't yet
> figure out how to scale things up in qubes?
Sor
alone
>>> VM
>>> on the same basis.
>>
>> Might be a temporary issue with Fedora's repositories. Try again later.
>> You might also want to switch to Fedora 28 instead.
>>
>>
>
> thanks!
>
> some time ago there were some problems with fed
are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web vi
On Sat, August 18, 2018 10:54 am, Franz wrote:
> Many thanks for the hard work.
> My upgrade to Whonix 14/Qubes 3.2 worked, but only if sys-whonix depends
> on template whonix-gw, but if it depends on template whonix-gw-14 which
> would seem more appropriate to me, then it is unabl
‐‐‐ Original Message ‐‐‐
On August 22, 2018 12:55 AM, Chris Laprise wrote:
> On 08/21/2018 04:52 PM, 'Zeko' via qubes-users wrote:
>
> > Hello
> > I've been using Qubes R4.0 for several months now and I'm getting tired
> > of Xfce, but KDE 5 is just unworkable on
. The
> downloads always completed properly, like wise writing onto the USBs.
Doesn't sound like an issue with your media.
> But every time I install r4 all goes well until after the reboot part of
> the install when the 'Qubes Install' window comes up. After this runs ok
> for a while,
On Sat, August 25, 2018 2:50 pm, Unman wrote:
> The Qubes networking structure is flexible enough to let you do pretty
> much whatever you like without unduly compromising security.
Say someone would like to set up an internal vswitch with multiple VMs on
it with one acting as a gateway,
ms can still be seen
> by pressing Alt + Tab, but none of them they can not be brought to the
> fore. I still continue to see only a black screen with a cursor on the
> desktop. I can not do anything, only rebooting helps. I do not really know
> if this problem is related to the error of my
Hello forum.
Actual Intel CPU's do not anymore support Windows 7 and Qubes 4 does
require modern hardware...
Question:
Are Windows 7 based AppVMs supported on "Windows10-only" hardware?
Thank's for your feedback!
Joe
--
You received this message because you are subscribed to the Goo
On Fri, September 7, 2018 2:42 pm, 'Neelix' via qubes-users wrote:
> Hi,
>
>
>
> I have received a .ova that I'm trying to run in a HVM. I have converted
> the OVA to a .qcow file with Qemu.
>
> I now try to run the .qcow in a HVM with; qvm-start HVM_Name
> --c
Thanks, but its still not booting. I have still the same problem.
On 09/07/2018 07:36 PM, 'awokd' via qubes-users wrote:
> On Fri, September 7, 2018 2:42 pm, 'Neelix' via qubes-users wrote:
>> Hi,
>>
>>
>>
>> I have received a .ova that I'm trying to run in a
anyone runned a .qcow2 successfully in Qubes?
Regards,
Neelix
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@google
On Fri, September 7, 2018 6:48 pm, John S.Recdep wrote:
> On 09/07/2018 12:48 AM, 'awokd' via qubes-users wrote:
>>
>> Close- when dom0 checks for template updates it needs to start the VM
>> specified for template updates, which in your case is sys-whonix-14.
>
> a) A
On Fri, September 7, 2018 6:52 pm, 'Neelix' via qubes-users wrote:
> Thanks, but its still not booting. I have still the same problem.
>
>
>
>
> On 09/07/2018 07:36 PM, 'awokd' via qubes-users wrote:
>
>> On Fri, September 7, 2018 2:42 pm, 'Neelix' via q
vid Wong wrote:
>>
>>> On 2018-09-02 22:22, pixel fairy wrote:
>>>
>>>> is it still necessary to disable hyper threading after upgrading in
>>>> qubes 4?
>>>>
>>>
>>> Hyper-threading should be disabled i
4 , which are otherwise
> working fine and I hesitate to mess with
> /etc/qubes-rpc/policy/qubes.UpdatesProxy
>
>
>
> However, once in a while I am concerned that sys-whonix-14 is starting
> when I am NOT updating anything eg in dom0 today :
>
> qvm-run -a fooappV
can also try without the "--option permissive=true", many devices
don't need that. Glad it worked!
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from i
ed this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view th
On Mon, September 3, 2018 8:29 pm, odindva0...@gmail.com wrote:
> Hey guys currently running Qubes R 4.0 .
> And my sys-net as failing to connect to the internet + when I switch on
> mozila is lagging pretty bad. Please check the pic to see what exactly
> the configuration show
, can you set the ip6 firewall to deny all? Might
already be set to that.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@google
On Thu, September 6, 2018 5:12 am, chrisrowland...@gmail.com wrote:
> On Wednesday, September 5, 2018 at 10:04:12 PM UTC-7,
> chrisro...@gmail.com wrote:
>> Hello all,
>>
>>
>> I am trying to get Qubes 4.0 running on an Intel i3-4360T chipset with
>> ASROCK E3C2
On Thu, August 30, 2018 7:58 am, Octavio Martin wrote:
> Yep I just realised that the ISO is actually an Installer. What I did is
>
>
> 1) DD'ed the ISO to a 32GB flash drive and the boot on it.
>
>
> 2) I plugged my 1TB usb drive
>
>
> The Qubes installer starts and
d take back the USB controller.
https://www.qubes-os.org/doc/usb/#how-to-use-a-usb-mouse describes how to
configure sys-usb to pass mouse input to dom0.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and s
On Thu, September 6, 2018 8:19 pm, John S.Recdep wrote:
> On 09/06/2018 02:45 AM, 'awokd' via qubes-users wrote:
>
>> On Wed, September 5, 2018 12:21 am, John S.Recdep wrote:
>>
>>> Hello,
>>>
>>>
>>>
>>> while upgrading to sys-whon
in advance,
Ralph
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to q
Issue fixed. In my fedora28 template I
changed /etc/X11/xorg-qubes.conf.template to have a hardcoded amount of RAM
for "Videocard0". So from:
VideoRam %MEM%
to
VideoRam 49576
49576 is just the amount of RAM which was calculated by the
`qubes-set-monitor-layo
On Fri, August 31, 2018 7:09 pm, Steve Coleman wrote:
> I saw that a while back a Qubes discussion on qemu's disk controller vs
> Windows support, which if I recall correctly required a modification to
> the qemu device being passed to the HVM. It appears that Qubes HVM is
> curre
On Fri, September 7, 2018 11:45 am, gdru...@gmail.com wrote:
> Hi,
>
>
> Why do I have to click on "Refresh" button in Qubes VM Manager for
> viewing/verifying the VMs state ('Started' or 'Stopped') ?
>
> On Qubes OS version 3.2, it was automatic, in
;>>>>>
>>>>>>> On Sunday, April 29, 2018 at 8:20:40 AM UTC-4,
>>>>>>> higgin...@gmail.com wrote:
>>>>>>>> tried ---
>>>>>>>>
>>>>>>>>
>>>>>>>>
is present only here (when type is dos, but
>>> not when type is gpt)
>>
>> Hi Marcus: Thanks so much for your input on this! You're on the right
>> track to think this is a UEFI issue. I've learned more about my
>> problem, so let me explain.
>>
>>
gt; I decided to see if I could install the debian-8 template with different
> results from the debian-9 template. Sure enough, by default terminal if
> displayed as an available app under debian-8, and within debian-8 Qubes
> Settings there are plenty of expected apps in the Applications tab.
.
Maybe confirm you have the master signing key as trusted? Note the
.trustdb the builder uses isn't in the default location. Otherwise, it
might just be a Fedora glitch on the mirror you hit, try another?
--
You received this message because you are subscribed to the Google Groups
"qubes-
On Fri, January 12, 2018 1:04 pm, Tom Zander wrote:
> On Friday, 12 January 2018 11:18:19 GMT 'awokd' via qubes-users wrote:
>
>> Would it be of value if I went through the published Docs and added
>> these version headers? Should newer versions be added at the top (so 4.0
>
On Fri, January 12, 2018 1:09 pm, Holger Levsen wrote:
> I'm not so sure, why not use git branches?
It doesn't sound like that's the route the Qubes team wants to take right
now, but at least splitting the content on the same page would make it
easier to migrate to that approach if they cha
Hello,
Can someone from the Qubes Dev Team update the Release Schedule for Qubes R4.0?
https://www.qubes-os.org/doc/releases/4.0/schedule still shows that release
candidate 4 will be released on the 8th of January.
Maybe fix the entry to "to be announced" or maybe add a hin
On Mon, January 22, 2018 2:56 pm, 'Guillaume Bertin' via qubes-users wrote:
> Hi,
>
>
> I'd like to blank my screen (with dpms off) without having to enter a
> password if I want to use it shortly after.
>
> After several tries with xscreensaver configuration on qubes and Debi
I'm going to be switching over to Qubes 4.4 from 3.2 once its released and I
have 2 questions about custom installation using thin pools.
1) First question is about creating a Swap partition. Would I create Swap as a
thin pool?
sudo lvcreate -L 4G --thinpool -n swap qubes_dom0
Or a standard
On Tue, January 23, 2018 8:32 pm, donoban wrote:
> On 01/23/2018 06:35 PM, Krišjānis Gross wrote:
>
>> Here is what I get:
>> -> Retreiving core RPM packages...
>> -> Verifying signatures...
>> Filename:
>> /home/krish/qubes-builder/cache/fc25/b
On Tue, January 23, 2018 8:32 pm, donoban wrote:
> On 01/23/2018 06:35 PM, Krišjānis Gross wrote:
>
>> Here is what I get:
>> -> Retreiving core RPM packages...
>> -> Verifying signatures...
>> Filename:
>> /home/krish/qubes-builder/cache/fc25/b
I decided to buy Lenovo G505s.
Thank you very much.
The hardware selection tree has become a big help I've decided.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, sen
On Wed, March 7, 2018 6:59 pm, hyperfekt wrote:
> While trying to reinstall some templates my dom0's application menu just
> broke, with every .desktop file gone. I wanted to document how to fix this
> for others - use this command:
>
> sudo qubes-dom0-update --action=reinstall $
eived this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this
On Wed, March 7, 2018 8:36 pm, Unman wrote:
> On Wed, Mar 07, 2018 at 08:19:09PM -, 'awokd' via qubes-users wrote:
>
>> On Wed, March 7, 2018 6:59 pm, hyperfekt wrote:
>>
>>> While trying to reinstall some templates my dom0's application menu
>>> just bro
On Wed, March 7, 2018 6:27 am, '我' via qubes-users wrote:
> Hello.
>
>
> I installed Qubes3.2 on my MacBook 2009 late. But I could not use WiFi.
> So I want to buy a new laptop for qubes4. What laptop is recommended?
>
>
> How about libreboot T400?
> https://minifree
Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/m
On Wed, March 7, 2018 7:11 am, awokd wrote:
> On Wed, March 7, 2018 6:27 am, '我' via qubes-users wrote:
>
>> Hello.
>>
>>
>>
>> I installed Qubes3.2 on my MacBook 2009 late. But I could not use WiFi.
>> So I want to buy a new laptop for qubes4. What la
ing list for nouveau + 4.0 (or 3.2 if that's what
> you're using).
Found it: https://www.qubes-os.org/doc/uefi-troubleshooting/
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from
On Thu, March 8, 2018 2:22 am, sevas wrote:
> Can I not change the name of my system installed template names?
If it doesn't let you, you can clone them, then dnf remove the originals.
--
You received this message because you are subscribed to the Google Groups
"qubes-user
> the whole disk, but I have partitions already in place, currently formatted
> for swap and ext4, that I would like for the installer to overwrite. How
> do I tell the Qubes installer to use those?
There's a manual/custom option in there somewhere that lets you specify
partition layout your
On Wed, March 7, 2018 7:31 pm, randallrba...@gmail.com wrote:
> Hi all I'm trying to install qubes on an external hard drive to test
> and get it working before I put it on my main machine, but it won't seem
> to get past this screen. Can someone help me out as I'm new to cubes an
On Thu, March 8, 2018 1:16 pm, Alex Dubois wrote:
I think the indentation got broken, this is you, right?
>> True but if the content is not accepted in Qubes... you may still want
>> to have it in Qubes Community.
>>
>> An example is a page on setting up a vnc con
se one large window covering both screens
along with "Winsplit Revolution" to make virtual monitors inside that:
https://www.mail-archive.com/qubes-users@googlegroups.com/msg08199.html
Kind of a hack but I'm not aware of any other working approach.
--
You received this message because you
select an
expression like CONSTANT >> 4 and it shows me what that evaluates to would
save me so much time!
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an em
ld I buy or what should I be
>> on the lookout for to make sure its compatible with qubes? (long range
>> for bonus pts!)
Try looking through the HCL for known good ones, or picking one and
searching the mailing list for reported problems. There's no HCL for PCI
devices, but I'm wonde
have exactly that issue whonix as well, but it's the first time I've
> seen others having it. I haven't checked if it's on github yet though,
> but so far we both have it.
It is in qubes-issues. Will be fixed with Whonix 14, which should be out
soon.
--
You received this message
On Sun, March 11, 2018 9:22 pm, rucksack.peter via qubes-users wrote:
> I'm trying to build a Qubes ISO on a Fedora 26 System, following the
> instructions of the documentation page "Building Qubes OS ISO", and get
> this error message:
>
> make[1]: Entering director
On Sun, March 11, 2018 10:03 pm, ale10203...@gmail.com wrote:
> Hello, I am currently locked out of my qubes system because of a "kernel
> panic" error I encounter when I boot the system, after the grub screen. I
> don't really know what to do. The only thing I did be
I'm trying to build a Qubes ISO on a Fedora 26 System, following the
instructions of the documentation page "Building Qubes OS ISO", and get this
error message:
make[1]: Entering directory '/home/xy/qubes-builder'
sudo chroot /home/xy/qubes-builder/chroot-fc25 dnf install -y
gcc-6.4.
wall-for-qubesos/
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to
On Sun, March 11, 2018 2:53 pm, Travis Dean wrote:
> I set up a usb qube, I have all usb controllers assigned to it. It is
> based on Fedora 26. I am on Qubes OS 4 rc5. When I shutdown the Debian 9
> TemplateVM all usb devices disappear from the list of attched devices. I
> then hav
On Fri, March 9, 2018 5:56 pm, randallrba...@gmail.com wrote:
> Hi there so I was finally able to get qubes installed to test if it
> actually runs on my laptop (Razer stealth 2017) and there's some issue
> with the display resolution. My resolution is 3200 x 1800 and that's
> fine, bu
On Mon, March 12, 2018 5:40 pm, akiraloopback via qubes-users wrote:
>> As you might guess all other USB devices that are connected to the same
>> Bus / same USB-Controller will also be "lost" to the sys-net VM.
>> On the Lenovo W540 notebook this means that 3 out
Maybe. No. I just installed sys-usb now, delegating the LTE device to sys-net:
[root@dom0 ~]# qubesctl state.sls qvm.sys-usb
[user@dom0 ~]$ qvm-usb -a sys-net sys-usb:4-10
Seems to work well.
--
You received this message because you are subscribed to the Google Groups
"qubes-users&q
Why do you have to disable USB3 in BIOS?
And what about bus 001 and 002, where may they be connected to?
If I delegate device 00:14.0 to sys-net, I cannot use any physical USB port in
dom0 any more.
--
You received this message because you are subscribed to the Google Groups
"qubes-users&qu
On Wed, February 28, 2018 6:34 pm, Chris Laprise wrote:
> On 02/28/2018 11:31 AM, klausdiet...@mail2tor.com wrote:
>
>> Hey guys,
>>
>>
>> i have a big problem with "Anonymizing your MAC Address with macchanger
>> and scripts". I used this Tutorial
On Tue, February 27, 2018 5:00 pm, Yuraeitha wrote:
> I'm working on an update script btw, which might solve issues like these.
I haven't tested it but I noticed there's a clean action, so you can do:
sudo qubes-dom0-update --action=clean
Not exactly sure what it does but it might simpl
Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit
https://groups.google.
Hello Yuraeitha,
Original-Nachricht
An 28. Feb. 2018, 21:39, Yuraeitha schrieb:
> It seems from time to time that various
> people have shared a good unofficial script,
> guides and 'how to's', and even code, for
> Qubes related content, on their github page
On Thu, March 1, 2018 1:14 am, billol...@gmail.com wrote:
>
> This is not qubes-specific. It hasn't worked in fedora for a long time,
> and I don't think it works in ubuntu/debian either, as long as
> NetworkManager is turned on. In regular fedora, you can use macchanger
>
On Sat, February 24, 2018 12:26 pm, 'awokd' via qubes-users wrote:
> don't have a Squid proxy to test against.
>
> For anyone who does (or is familiar with how they work):
> A) Does it look right?
> B) In step 3, adding apt/dnf proxy settings to all AppVMs based on the
delay, can this be
resolved by blacklisting something? If so where? What?
[799]
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qube
is located.
When I attach this USB device to sys-net VM, this VM does not start any more,
however, but throws the error: "qubes sys-net modem VM: internal error: unable
to reset PCI device : no FLR, PM reset or bus reset available"
Rebooting the whole Qubes (3.2) doesn't help either.
Any ideas
ient through the internet.
>
> I'm aware that there is the guide for networking and firewall:
> https://www.qubes-os.org/doc/firewall/
>
>
> but unfortunately I cant infer it to my use case.
Not sure what you mean- Qubes doesn't need any special rules to
communicate out. If you want to r
On Tue, March 13, 2018 2:46 am, Tim W wrote:
> On Saturday, March 10, 2018 at 6:01:25 PM UTC-5, Tim W wrote:
>
>> When I try to build anything with qubes-builder I keep getting an error
>> when its verifying tags. Specifically this error below:
>>
>> -
mmunicate
> with, right?
Yes, that is a good step to take.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to
Am Montag, 12. März 2018 01:01:55 UTC+1 schrieb awokd:
> On Sun, March 11, 2018 9:22 pm, rucksack.peter via qubes-users wrote:
> > I'm trying to build a Qubes ISO on a Fedora 26 System, following the
> > instructions of the documentation page "Building Qubes OS ISO", and g
this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion
1101 - 1200 of 4383 matches
Mail list logo