Re: [RBW] Re: Bill's 57cm Legolas build thread

Bill, 42 x 27 is an impressive low gear! On my QB, my low is 44x21 (57”) and that requires some LCG on the steeper sections, some of them because I spin out in the power stroke on the loose stuff. With my 38 x 22 (47”) gear on Shadowfax I get up those just fine, though that’s also with a wider

Re: [RBW] Re: Bill's 57cm Legolas build thread

Tim correctly pointed out : " it would be easy to fit a wider-range 10 speed cassette with just a rear derailleur swap (9-speed MTB RD), should you decide to do so." This drivetrain is the absolute highest range I would consider. The steps lower include 42T --> 40T 12-27 --> 11-28 -->

Re: [RBW] Re: Bill's 57cm Legolas build thread

Congrats on the new bike, Bill! I love the color. There are too few purple bikes in the world, let alone this gorgeous shade. The 42x27 will toughen you up, for sure. And I understand the "climb it, or shoulder it" ethos for cyclocross races. And it would be easy to fit a wider-range 10 speed

[RBW] Re: Bill's 57cm Legolas build thread

The weather looked lousy yesterday so I did not ride “Sal”. Sure enough, on my lunch break I rode to the taco  lace and got POUNDED by a hailstorm. Ouch! Anyway today was clear but cold, and I did the ~25 mile road ride from my house to Riv HQ. Roman wanted to take some canonical Riv shots for

[RBW] Re: Bill's 57cm Legolas build thread

Oh yeah, now that’s what I’m talkin about. Bravo, William... Bravo  -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Bill's 57cm Legolas build thread

Igor asked if my wheels were 11sp or 10: My HED Ardennes wheelset is 11-sp and came with a spacer for running a 10-sp cassette. Bill -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] Re: Bill's 57cm Legolas build thread

It cost more than a Waterford built frame and less than a Rivendell custom. Just like you’d expect. Bill Lindsay El Cerrito Ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from

[RBW] Re: Bill's 57cm Legolas build thread

Ive never seen a threadless Riv! You do some great builds Bill. Love your taste in common sense bits. What does a custom like that run, if you dont mind me asking.. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from

[RBW] Re: Bill's 57cm Legolas build thread

Very nice, Bill. Just curious are those HED Ardennes 10speed or 11 with a spacer to run the 10speed cassette? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email

[RBW] Re: Bill's 57cm Legolas build thread

DarinM asked if I'm going 1x entirely. No, I'm not. I still like the added versatility of a super compact double for many types of riding that I do. I'm in no hurry to convert any of my current doubles to 1x. I have three 1x bikes right now, and don't have any plans to convert any of my

[RBW] Re: Bill's 57cm Legolas build thread

Christian asked for the build list: 57 Legolas 2773g Chris King Headset 84g HED Ardennes wheels 1608g Compass Steilacoom EL tires 705g Challenge latex tubes 211g Paul Skewers 121g Dura Ace 12-27 10sp cassette 188g SRAM Force 1 crankset 42t 172.5mm 609g Wheels Mfg BB 108g XTR pedals 310g SRAM

[RBW] Re: Bill's 57cm Legolas build thread

Looks great Bill, very tidy looking. Do you think you're moving towards 1X on all of your bikes? Darin in Eastern WA -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] Re: Bill's 57cm Legolas build thread

Great looking bike Bill. We need pics of it in the dirt next! Could you post the full build list? I'm curious what goes into a sub 20lb Riv. Also any tricks you implemented in the build would be great too! Are you running the tires tubeless? -- You received this message because you are

[RBW] Re: Bill's 57cm Legolas build thread

[RBW] Re: Bill's 57cm Legolas build thread

You got me, Bill. Mine's slightly more than 20lbs with bar tape. 1 Ti bottle cage. On Saturday, April 14, 2018 at 7:30:45 AM UTC-4, Belopsky wrote: > > I mounted my Shimano 105 11speed bits on mine last night, that definitely > gained a bit of weight I think. Going to weigh mine later today and

[RBW] Re: Bill's 57cm Legolas build thread

I mounted my Shimano 105 11speed bits on mine last night, that definitely gained a bit of weight I think. Going to weigh mine later today and see - still missing brakes because the Motolite I was using need long pull..maybe I'll steal the MiniMoto from my other bike and then see how the Paul

[RBW] Re: Bill's 57cm Legolas build thread

Very nice. I am hoping my Kelly Knobby X is sub 20lbs when I am done. I have a few more heavy bits but it's a lighter frame -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it,

[RBW] Re: Bill's 57cm Legolas build thread

Holy cow, another stupendously great bike. You have a gift. Andrew in SLC, UT >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Bill's 57cm Legolas build thread

I'll pile on to say that is a beauty, Bill. As usual, your spotless and drool-worthy build doesn't hinder things. Enjoy! KJ On Thursday, April 12, 2018 at 7:44:55 AM UTC-7, Bill Lindsay wrote: > > > I'll post build photos here on my new Legolas. Here's the frame, sitting > on Grant's 'desk'.

[RBW] Re: Bill's 57cm Legolas build thread

This is a beautiful bike, Bill. The Legolas is one of my all-time favorite Rivendell bikes. I appreciate you pointing out the difference between a cyclocross bike and an all-rounder. I once asked Ira Ryan if a cyclocross bike was a good do-all bike for most people, expecting him to be

[RBW] Re: Bill's 57cm Legolas build thread

I have it built enough to weigh it and ride it around the block. It's confirmed at 19.3 pounds. The only stuff to be added are bar tape and a bottle cage:

[RBW] Re: Bill's 57cm Legolas build thread

wowzers looks great! On Thursday, April 12, 2018 at 10:59:49 AM UTC-4, Bill Lindsay wrote: > > > > Last night's build progress. The first thing I wanted to do

[RBW] Re: Bill's 57cm Legolas build thread

That thing is badass. If Chuck Norris wanted a bike, it would look like that. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Bill's 57cm Legolas build thread

I love the color of your new bike! I’m jealous as well. What a beautiful bike and great build! Many happy miles. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] Re: Bill's 57cm Legolas build thread

Sweet -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to

[RBW] Re: Bill's 57cm Legolas build thread

Yes, Patrick, I was biting my lip as you were talking about your Hunqabeam for exactly that reason. We were adjacent in the Nobilette queue. Bill P.S. Grant talked about the tip of the plaid tammie comment as I was there. He was truly tickled by that comment On Thursday, April 12, 2018 at

[RBW] Re: Bill's 57cm Legolas build thread

Fantastic, Bill! I’m betting our frames had a Rivendell party at Mark’s. My Hunqabeam ws likely there at the same time yours and Roman’s were being built. Grin. With abandon, Patrick -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: Bill's 57cm Legolas build thread

Ah, I see, more for adjustment. Very cool though. I will get a pair of those! Thanks. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Bill's 57cm Legolas build thread

The adjuster on Roman’s bike is made by Hunter and the product name is Nugz. Google “Hunter Nugz”. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Bill's 57cm Legolas build thread

Really nice Bill. I dig the color choice too. Will look forward to the full build and the reports from the kinds of rides you get up to on this Legolas. I like Romans color too. And the mixed Neo Retros on his. I never thought of doing that, but I will now! Another thing I am noticing on Romans

Re: [RBW] Re: Bill's 57cm Legolas build thread

And the Legolas does share quite a bit with the Roadeo (most of the tubing and lugs are the same). On Thu, Apr 12, 2018 at 10:28 AM, Bill Lindsay wrote: > The Legolas name is owned by the family of the author of Lord of the > Rings. They don't allow Rivendell to promote

[RBW] Re: Bill's 57cm Legolas build thread

The Legolas name is owned by the family of the author of Lord of the Rings. They don't allow Rivendell to promote bikes with names taken from LotR. That's part of the reason you don't see Legolas, Bombadil or Quickbeam anywhere prominent in Riv communication. This bike was not replaced in

[RBW] Re: Bill's 57cm Legolas build thread

Gosh that’s nice. I’m unfamiliar with the history of why Legolas was discontinued, and what Grant replaced it with. It “seems” like a level-tubed lighter weight Sam ... or perhaps a beefier/wider forked Roadini. In any case, I’m enlightened and jealous! Tom -- You received this message

[RBW] Re: Bill's 57cm Legolas build thread

Last night's build progress. The first thing I wanted to do was get enough bits on to confirm where to cut the steerer. I installed: Wheels Manufacturing MUSA