On Sun, 28 Jun 1998, Richard Sharpe wrote:
priority than the HTTP packets, however, this depends on both the routers
handling the TOS field correctly (which Ciscos do, I believe) and the PPP
server doing likewise, and I am not convinced that the Linux based ones do
that, but Cisco 5260s may
I saw a great deal on an Intel Providence PR440FX mb and was wondering if
anyone had any experience with them and Linux. The reason that I'm asking
is that it has a built in Adaptec 7880 UW SCSI and Intel fast ethernet. I
thought that having both on the mb might introduce some unforseen
Can anybody send me the file libncurses.so.4, from redhat 5.1.
thanks in advance.
Regards,
Igor N. Green
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail
Hi,
On boot up I get an error message as follows
Page faults with physical I/O:311
Can anyone tell me what this means.
I am get a bios fault at boot time also saying System Configuration
Data Read Error. I can't figure out where it is comming from. I hit
F1 to resume and I still come up
Thanks for the pointer:')
At 03:34 AM 6/28/98 -0600, you wrote:
that is great but where might these man pages for pop b as i have
tried man ipop3d and man imapd and so on with no man... man;')
At 03:22 AM 6/27/98 +0200, you wrote:
At 12:05 6/26/98 -0600, dreamwvr wrote:
Well ??? been looking for
On Sat, 27 Jun 1998, Dan Cornilescu wrote:
-Zoki wrote:
-
- get_mail script looks like this:
-
- #!/bash/sh
-
-Is sh installed in /bash on your system?
*** Nope. No /bash on my box. But if you're referring to the problem of
the script not working: Why should it work when invoked manually and
On Sun, 28 Jun 1998, Paul Fontenot wrote:
-(+)I think we're getting closer to the reason of my problem: I just noticed
-(+)that /usr/sbin/crontab doesn't exist!?? Next thing I looked at is where
-
-Slow down Zoki, don't get SO excited 8) The file is: /usr/bin/crontab NOT
*** I'm not, it's my
Hi,
I wonder if there's anyone out there who has any experiences running the HP Colorado
5GB IDE-backup drive with RH Linux. Are there any problems, is it stable?
Regards,
Niclas
Hi,
I wonder if there's anyone out there who has any
experiences running the HP Colorado 5GB
(+)*** Nope. No /bash on my box. But if you're referring to the problem of
(+)the script not working: Why should it work when invoked manually and not
(+)when launched through cron?
How are you invoking it? Are you doing this:
'sh get_mail'
OR, are you doing this:
'get_mail'
-Paul
--
First of all, many thanks for the responses.
Well, I think I have a theoretical solution.
Situation:
I am happy ftp'ing a big new kernel.tar.gz from ftp.kernel.org.
What happens is, ftp.kernel.org send me the data of the kernel.tar.gz in
big packets.
I ( actually my PC) receive this data and
On Mon, 29 Jun 1998, Wim Raets wrote:
The solution:
If I could somehow make my PC wait 'a few seconds, but not to long'
before responding to the server, the throughput would drop. Because the
server has to wait for the confirmation before sending the next packet.
This is probably a bad
Hi everyone!
noticed the thread and was hoping i could get some pointers:')
Just finished reading SENDMAIL cover to cover and am planning to set up
a double mail server arrangement with one mailer for outside a firewall
that the local users have their outgoing mail relayed to. Is their
I changed the IP address of my eth0 adapter and
can no longer log on as root any ideas?
Does anyone know of an X driver for the Chips and Technologies 6 PCI
video card? It's in a new laptop we've just got.
=
Kevin Thorpe
Purchasing Index (UK) Limited
LONDON, England
Tel: (44) 171 350 4200
Message created by ExpressIT! 2000 trial
Could someone please show explain to us why the XEmacs editor
is not distributed with Red Hat Linux?
Things would be easier for those who has it as his preferred
editor if it was distributed.
Romildo
[EMAIL PROTECTED]
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
Niclas Domack wrote:
I wonder if there's anyone out there who has any experiences running the
HP Colorado 5GB IDE-backup drive with RH Linux. Are there any problems,
is it stable?
Regards,
Niclas
First, please append a signature that shows your personal return E-mail
address. This has
Hi everyone,
I have installed all the kde stuff (hopefiully) and I have been
trying to get X started wtih the kde desktop, but I have so far
failed to find how to do this.
I have the RH5.0 installed with Xfree86 as the X server and it
continually defaults to FVWM95. Just where is this
for some reason this didnt get to the list i think
---
Brad Wyman
[EMAIL PROTECTED]
No root, or any other user. ill look and see if that file is there tho,
and i think ill just rename it or somthing.
Hmm, you
Hi everybody...
I'm new to the Linux world and I'm having trouble with RH 5.0 (2.0.31-7
kernel) and my Sony cdu33a CD ROM. For the initial installation I had to do
it from one of the DOS Partitions and everything seemed to go as expected
(even I could configure my Sounblaster 16 card
If you are invoking KDE via XDM, add or create an executeable shell file
calles ".xsession". Add the line "startkde" to it.
If you are invoking KDE via the command line in character mode with
"startx", do the same thing with the file called ".xinitrc".
(These files are in the individual user's
[EMAIL PROTECTED] said:
Can anyone tell me why I can't get the 265041 blocks I have allocated
for my swap space. 'cat /proc/meminfo' shows this:
total:used:free: shared: buffers: cached: Mem:
130859008 126644224 4214784 57282560 74412032 16134144 Swap:
133885952
Hi!
How can I upgrade my RH4.2 Kernel from 2.0.30 to 2.0.34?
I've seen so many mesages about upgrading the Kernel on RH5.0, but
none on 4.2...
Any help would be apreciated.
__
Mauricio Teixeira -
[EMAIL PROTECTED] said:
Does anyone know of an X driver for the Chips and Technologies 6
PCI video card? It's in a new laptop we've just got.
There is support in XFree86 v3.3.2 as distributed in Red Hat v5.1. My laptop
has the CT65554, also supported. The driver you'll end up using
On 29 Jun, Mauricio Teixeira shaped the somewhat mellow bitstream to say:
Hi!
How can I upgrade my RH4.2 Kernel from 2.0.30 to 2.0.34?
I've seen so many mesages about upgrading the Kernel on RH5.0, but
none on 4.2...
Any help would be apreciated.
I really don't
I have downloaded Apache 1.3.0, unziped, untared, and all that stuff.
Now my problem is this:
Error: could not find any of these C compilers
anywhere in your PATH: gcc cc acc c89
Now I probaly don't have one but where do I find them and where do I
need to put them for this thing to work.
Anybody know what this is?
nfs_hget: getattr error = 13
nfs_read_super : get root inode failed
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL
I probably overlooked something obvious, but here's
my problem:
I've got two NICs in a old 486 that I am trying to configure
as a proxy firewall. Acording to the Firewall-HOWTO, it is
to the point where I should be able to ping machines on either
side of the firewall, but eth0 seems to be the
On 29 Jun, Brian Bothern shaped the somewhat mellow bitstream to say:
I have downloaded Apache 1.3.0, unziped, untared, and all that stuff.
Now my problem is this:
Error: could not find any of these C compilers
anywhere in your PATH: gcc cc acc c89
Now I probaly don't have one but
Has anyone been able to get external MIDI (actually a WaveBlaster
compatible daughtercard) on a Sound Blaster 16 (non-pnp) working with
the
Red Hat modularized sound system?
$ cat /dev/sndstat
Sound Driver:3.5.4-960630
Xfree86-SVGA cannot be installed.
Looks like: /usr/X11r6/lib/X11/xkb/something conflicts with file from
metroess-3.1.5-1
I think I need something else. I am sorry for this, I am a newbie, thrown
into these waters after someone left me.
Now I got to learn it all, quickly.
Anyway, it took me
Has anyone been able to get external MIDI (actually a WaveBlaster
compatible daughtercard) on a Sound Blaster 16 (non-pnp) working with
the Red Hat modularized sound system?
$ cat /dev/sndstat
Sound Driver:3.5.4-960630
Kernel:
On Sun, Jun 28, 1998 at 02:23:49PM +0530, Salil Khamkar wrote:
Hi ,
I want to change my default console color from black and white to blue and
white . Can some one please tell me as to how this can be done . Also how
setterm -foreground white -background blue
can i enable this at boot time
On Sun, Jun 28, 1998 at 12:40:03PM -0400, Fred Smith wrote:
On Sat, Jun 27, 1998 at 11:00:30PM +0900, Richard Sharpe wrote:
Hi,
what I am seeking is a program, more or less :-), that allows the user to
scroll left or right in a document as well as up or down.
Does anyone know of
From: [EMAIL PROTECTED]
On 29 Jun, Mauricio Teixeira shaped the somewhat mellow bitstream to say:
Hi!
How can I upgrade my RH4.2 Kernel from 2.0.30 to 2.0.34?
I've seen so many mesages about upgrading the Kernel on RH5.0, but
none on 4.2...
Any help would be
I am kind of new to this, but I have installed Red Hat several times. I have tried to
create 2 boot floppies and neither one of them work. The first disk I made was with
Red Hat's install program, the second I made with mkbootdisk When I start up on a
floppy, I get the Lilo prompt, then it
This maybe a dumb question, but I have not yet got Linux going on my
computer so I have no expierience.
Are there variations in commands between different shells?
Thanks,
Jordan Keuseman
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
Hello !!!
Where can I find a searcher of this mailling list???
Bye.
xx //
xx xx ( o o )
xx xx/oOO-O-OOo\
Yes, but not tremendous ones. Try bash first. It's your friend.
Eric Cifreo
-Original Message-
From: Jordan R. K. [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 29, 1998 11:30 am
To: redhat list
Subject: shells
This maybe a dumb question, but I have not yet got Linux going on my
Dirk Muders wrote:
version). One other thing were the MSS flags. I still had them set. MSS
CONFLICTS with the Ensoniq ! (Should have read the doc... it says there).
I'm still trying to get my ESS1868 to work. What are the MSS flags?
--
Timothy King
[EMAIL PROTECTED] || [EMAIL PROTECTED]
Once upon a time Dave Ihnat wrote:
[...]
Kernighan, Ritchie, Thompson, et. al. originally implemented the
concept of a hard link only. They considered the equivalent of what
would eventually became a symlink too hard to maintain reliably, and
felt it would lend itself to abuse--in fact, the
http://www.linux.org/
is the best start place to look at
also
ftp.redhat.com
is good for alpha but hard to loggin
ftp.sunsite.edu
is the best public domain linux site.
alos u can look at
http://www.ctyme.com/linuxdoc.htm
http://lxr.linux.no/source/
chang
[EMAIL PROTECTED] wrote:
I am looking
*** REPLY SEPARATOR ***
On 6/26/98, at 2:55 AM, William T Wilson wrote:
On Fri, 26 Jun 1998, Tony Wells wrote:
For the client workstation ease of use and penetration of
application software is the driver. Win9x and NT are the clear
Right. We all agree that there is less
I belelieve (I'm pretty sure) that these rpms are for Xwindows support of
emacs. XEmacs is a different program altogether.
Scott
*** REPLY SEPARATOR ***
On 6/29/98, at 10:27 AM, Serge Pluess wrote:
XEmacs is distributed with RHL. In 5.1 the file is:
I have a problem with a generic NE2000 compatible network card ( ISA ).
The card has no prom or jumper, software setup only. I can't get RH
linux to see the card at install using the NE2000 seting . The card
works good in win95. I setup,"in linux" the same I/O and IRQ as in
windows. Is there
My opinion is that you are screwed. However, someone out there with more
years under their belt might know of some super duper utility to fix this,
so wait for more responses before you start crying.
Dan
At 02:11 PM 6/29/98 -0400, you wrote:
I ran into trouble while trying to install Linux. I
Stating that NT has a great deal of downtime is a pretty broad statement.
I think it would be better to put that NT has a greater potential for
downtime but it can be just as stable as Unix. Linux/Unix do to its
maturaty has a greater potential for uptime but it can be unstable. I have
NT
If you deleted the partition for hda1 and that is where your win95 is . I think
There's nothing you can do but repartition
reformat and start over.
sorry
Dmc
Dan Cyr wrote:
My opinion is that you are screwed. However, someone out there with more
years under their belt might know of some
Ok, now after getting the lan working, the firewall working, getting MS
frontpage98 extentions working - I'm wantintg to get news working
Innd is loading at boot ok, I don't have an active list yet, and I'm not
sure how to get that down from the ISP.
I don't want to carry the entire feed,
Thanks in advance to whomever responds.
I tried posting about Netscape crashing -- no luck. So a different
question: can somebody point me to sources like redhat-list, but
aimed at Netscape problems?
bob jones ([EMAIL PROTECTED])
--
PLEASE read the Red Hat FAQ, Tips, Errata and the
I just installed Red Hat 5.1 and I am not sure which configuration file I
should edit to make the FvwmPager *not* sticky which appears to be the
default. The included documentation in /usr/doc/fvwm-2.0.46 refers the user
to .fvwm2rc. When I "find / -name .fvwm2rc* -print" the following directory
Get the rpm from www.redhat.com it'll fix it.
At 10:27 AM 6/24/98 -0700, you wrote:
Hello,
I have setup a NIS connection between 2 machines. I have everything setup
and when I type "ypcat passwd" on the slave server, I get the master's
passwd, which leads me to believe that NIS is working
On 29 Jun, bob jones shaped the somewhat mellow bitstream to say:
Thanks in advance to whomever responds.
I tried posting about Netscape crashing -- no luck. So a different
question: can somebody point me to sources like redhat-list, but
aimed at Netscape problems?
bob jones ([EMAIL
On 29 Jun, Mauricio Teixeira shaped the somewhat mellow bitstream to say:
Hi!
I've upgraded my RH4.2 kernel from 2.0.30 to 2.0.34 using the
.tar.gz file, compiled and it's going fine now...
But I'm still not sure about 2 things: Sistem.map and module-info
still point to
On Mon, 29 Jun 1998, Guin, Jay wrote:
I used fdisk to partition my only harddrive. Thereafter I proceeded to
I'm going to make some assumptions that are not made clear by your email.
1) You already had Windows 95 installed on your single hard drive
2) You installed Linux on your single hard
Greetings,
I was wondering if someone could help me here. My Linux server (runs ftp
and quake2) keeps dying with a the following error: "kernel panic
skput:over". Sometimes this message is followed by a bunch of numbers,
somethimes just the message. I've narrrowed it down these two cuases:
On Mon, 29 Jun 1998, Paul Fontenot wrote:
-(+)*** Nope. No /bash on my box. But if you're referring to the problem of
-(+)the script not working: Why should it work when invoked manually and not
-(+)when launched through cron?
-
-How are you invoking it? Are you doing this:
-
-'sh get_mail'
-
-
On Mon, Jun 29, 1998 at 09:00:00AM -0400, [EMAIL PROTECTED] wrote:
Hi everybody...
I'm new to the Linux world and I'm having trouble with RH 5.0 (2.0.31-7
kernel) and my Sony cdu33a CD ROM. For the initial installation I had to do
it from one of the DOS Partitions and everything
On 6/29/98, at 3:47 PM, [EMAIL PROTECTED] wrote:
Stating that NT has a great deal of downtime is a pretty broad
statement.
I think it would be better to put that NT has a greater potential for
downtime but it can be just as stable as Unix. Linux/Unix do to its
maturaty has a greater
You might want to try switching the cdrom master/slave switch. Also since
it looks to be that you have the cdrom as the second device on the first
ide controller you might want to try switching it to the first device on
the second ide controller if it is available. I have heard of some people
Serge Pluess [EMAIL PROTECTED] writes:
XEmacs is distributed with RHL. In 5.1 the file is:
emacs-X11-20.2-7.i386.rpm
in 5.0 it is:
emacs-X11-20.2-4.i386.rpm
and in 4.2 it is:
emacs-X11-19.34-4.i386.rpm
During installation you have the option of installing it.
Hello RH list members:
Is a person limited to Netscape
Communicator's illegible font selection or is it possible to affect their
appearance by manipulating fvwm in some manner?
R Arab
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
I am trying to print some files from my linux box to a Panasonic KX-P2123
color dot-matrix printer.
Does anyone know the right commands to put in the printcap file, or some
other method to print into this box. I do not care about this printing color
at all.
Also, if it is easier to print to my
dear redhat support,
thank you for your reply. unfortunately, i've switched back to
windows
95. i wasn't able to find useful applications that i could use with
linux. specifically, i needed a wordprocessor(similar to M$Word),
finance software(Quicken-like), games(Quake 2). I also
On 29 Jun, Cory T. Lamb shaped the somewhat mellow bitstream to say:
Hey,
Looking for a way to recieve mail right on my box which is on the internet
via my college and hostname provided by ml.org... I have everything
(apache, telnetd, ftpd, sendmail, etc) I just can't recieve mail. Is
"Jack Hatfield" [EMAIL PROTECTED] writes:
Xfree86-SVGA cannot be installed.
Looks like: /usr/X11r6/lib/X11/xkb/something conflicts with file from
metroess-3.1.5-1
I think I need something else. I am sorry for this, I am a newbie, thrown
into these waters after someone left me.
Now I
snipped a lot of close-minded whining about lack of apps, difficulties,
etc
my 2 cents,
laziest-opinionated-whining engineer
Couldn't have said it better myself!
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ
On Mon, 29 Jun 1998, Fred Smith wrote:
On Sun, Jun 28, 1998 at 02:23:49PM +0530, Salil Khamkar wrote:
Hi ,
I want to change my default console color from black and white to blue and
white . Can some one please tell me as to how this can be done . Also how
setterm -foreground white
"Jack Hatfield" [EMAIL PROTECTED] writes:
I am trying to print some files from my linux box to a Panasonic KX-P2123
color dot-matrix printer.
Does anyone know the right commands to put in the printcap file, or some
other method to print into this box. I do not care about this printing
Hi all;
I have just completed another install of RHL5.0 and for some reason that
could quite possibly be operator error, in.ftpd did not get built. So being
a bit of hack I copied one from another RHL5.0 install machine onto the
proper place on the machine without and gave inetd a HUP. So ftp
Hello:
I'm looking at purchasing a new server and was wondering if the Adaptec
AAA-131 RAID controller would have driver support for Linux. If not, what
about the AAA-133?
I did a search on Dejanews and things didn't look too promising, but I
thought I'd check with you fine folks here.
Title: Re: Adaptec AAA-131 RAID supported?
I have a server with the AAA-133 It works fine if you don't want RAID from it. If you are looking for a nice scsi card the look at it, however you can buy one for much less. If you want RAID don't go there!
The nice people at Adaptec won't release
Hello,
After having fried my HD (see "Problem with Rescue Disk" subject earlier
today), I decided to reinstall RHL 5.1.
Everything went fine, until I chose to create a boot disk. At this time, I
didn't hear any sound in the floppy drive. It stayed like that for 20 mins,
until I chose to kill the
This is a continuation of the jagged blue line thread.
Thank you for all the info, I am trying to put into order all of these
instructions, but I got one quick question.
How does the command startx differentiate metro-x and Xfree86 stuff. What
does it use, because when I go throught the metro-x
I have NEVER been able to get my RedHat (5.0) properly.
System:
AMD K6 200 MHz, 32MB RAM, 4.3 GIG drive, V.90 modem, Cannon BJC-610
printer, print to parallel port 1 (LPT1)(/dev/lp1)
Symptoms:
Any print job that requires a filter shows
=
Unrecoverable error: rangecheck in
On Mon 29 Jun at 18:33:07 -0400 [EMAIL PROTECTED] done said:
Hello RH list members:
Is a person limited to Netscape
Communicator's illegible font selection or is it possible to affect their
appearance by manipulating fvwm in some manner?
You know, I've been
I think I may have something to offer on this one! (yes, it scares me,
too :-)
HOWEVER, my solution is reliant on you having installed a certain
application before this problem... and I'll get to it soon.
I stuffed up in a way very similar to this. I think it was the primary
dos partition
I posted a question a few digests back about a problem I'm having with
netcfg... no-one has helped me yet... Please do so. I'll be ever-so
grateful. :-)
I need netcfg to expect something along the lines of: "Student HS# V34+
: ", where '#' is any number, and then send "ppp" in reply (that is
Hello!
There are several possible reasons why you're not receiving mail. First,
mailbox loopback error, because you didn't configure your sendmail properly (Cw
settings). Second, your system isn't up 24/7. For the second, you'd require
domain mail forwarding facilities, and then you could use
"Jack Hatfield" [EMAIL PROTECTED] writes:
This is a continuation of the jagged blue line thread.
Thank you for all the info, I am trying to put into order all of these
instructions, but I got one quick question.
If you want to use metro-x then don't follow any of the instructions
for
I've got a rhl 4.2 box i've set up on the net which has sendmail 8.8 running
on it.
What I 'm using it for is ONE mailing list, but I don't want spammers using my
machine as as a spam gateway.
Is there any way for me to _accept_ mail from anyone but to NEVER send mail
out from my system save
Leston Buell wrote:
I cannot seem to be able to grant write permission to non-root users for
a hard drive with a vfat file system. What do i need to do?
I have a linux RH5.0 system which I use as a single user workstation. To enable
me to write to a vfat partition,
I put the following in my
Update to a recent version of ghostscript, rh rpm versions are really
old from what I've seen..
I grabed a tarball of gs from sunsite and all is well with the 600
series...
Piet Barber wrote:
I have NEVER been able to get my RedHat (5.0) properly.
System:
AMD K6 200 MHz, 32MB RAM,
On Mon, 29 Jun 1998, Kevin A. Pieckiel wrote:
Hi!
When I use fetchmail, I inevitably get messages saying that the
message was not the expected length:
fetchmail: POP3 TOP 1 2147483647
fetchmail: POP3 +OK 4161 octets
fetchmail: reading message 1 of 1 (4161 bytes)
fetchmail: about to
James Michael Keller [EMAIL PROTECTED] writes:
Update to a recent version of ghostscript, rh rpm versions are really
old from what I've seen..
I grabed a tarball of gs from sunsite and all is well with the 600
series...
http://www.typhoon.dircon.co.uk for RPMS.
--
Eze Ogwuma
--
I pulled down the kernel 2.0.34 files from the redhat site and ran
through the instructions at
http://www.redhat.com/support/docs/rhl/intel/kernel-upgrade-intel.html
to get the kernel installed and running. So far so good.
Since I have SCSI and I needed to enable multicast routing in the
XEmacs is distributed as part of the powertools.
On 29 Jun 1998 20:38:12 +0100, [EMAIL PROTECTED] wrote:
Serge Pluess [EMAIL PROTECTED] writes:
XEmacs is distributed with RHL. In 5.1 the file is:
emacs-X11-20.2-7.i386.rpm
in 5.0 it is:
emacs-X11-20.2-4.i386.rpm
James Michael Keller wrote:
Update to a recent version of ghostscript, rh rpm versions are really
old from what I've seen..
You aren't kidding. The Redhat distribution has versino 3.31! Thanks for the
help!
James Michael Keller| [EMAIL PROTECTED] or [EMAIL PROTECTED]
On Mon, 29 Jun 1998 [EMAIL PROTECTED] wrote:
You know, I've been wondering why Red Hat's XConfigurator (or xf86config for
that matter) seem to overlook some font paths that MetroX recognise. SuSE
picks them up just fine, so I was lucky enough to find a fix. Here's what I
have in my
Anyone have any experience getting mrouted working with RedHat 5.0?
I managed to get a kernel built with multicast routing and ipip
tunnelling (kernel version 2.0.31 which came with the CD).
And I found a mrouted 3.9 beta. The problem appears to be that
Linux isn't forwarding the MCAST
Eze Ogwuma wrote:
James Michael Keller [EMAIL PROTECTED] writes:
Update to a recent version of ghostscript, rh rpm versions are really
old from what I've seen..
I grabed a tarball of gs from sunsite and all is well with the 600
series...
http://www.typhoon.dircon.co.uk for RPMS.
Copied my web page from my ISP to my local
network server ( RH 5.0 with
current errata updates ) the frame page loads
fine, however the interal
pages show up as raw text, and not as rendered
web pages. It works fine
if there is just a single frame.
The http header for each page should
(+)The backup commands work, anything works for that matter, but not the
(+)get_mail script to process mail. I'm sure the problem is so obvious it's
(+)pulling me by the nose and I still can't see it!
This is a question that probly should have been asked first, is the script
executable?
chmod
"Matthew G. Marsh" [EMAIL PROTECTED] wrote :
You have to install to IDE then go get the AIC7xxx driver 5.0.8
(current is 5.0.19) and patch the kernel with it. You can also get
the driver source and compile it as a module before install on a
friends machine and
then mount the kernel disk
Add this line into the .xinitrc file, which is located in your
user's directory
/usr/local/kde/bin/startkde
You may have to create this file. Then just type startx, and it
will start KDE instead of FVWM
Brandon P.
Thanks for your reply. When I deleted the hda1 partition through
Linux's fdisk, I did not create any new partition on those sectors.
My new partition table looks like the following:
Original partition (before using fdisk):
Dev. BootBegin Start End Blocks
On Mon, 29 Jun 1998, James Michael Keller wrote:
Innd is loading at boot ok, I don't have an active list yet, and I'm not
sure how to get that down from the ISP.
Ask them for it. :)
I don't want to carry the entire feed, ( ie 80% of the damn feeds are
the *.binary.* groups. ) Just a few
Hello
On 29-Jun-98 Iztok Polanic wrote:
Where can I find a searcher of this mailling list???
http://www.findmail.com/ may be a good start; contains a list of mailing lists,
and archives quite a number too!
- hoeteck
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
Hi,
how do I do this?,
sendmail seems to work really well for an ISP with individual user accounts
but how to I set it upfor a mail server to direct all mail addressed to
[EMAIL PROTECTED] to a single account, say tom (where xxx is
any name at all and tom is a user in my password file and
it is more powerful than the one used by M$ as a byte of
advice run to your store and get 'DNS and BIND' read it
and you won't be sorry:')
At 12:11 PM 6/28/98 +0700, Chaiya Intasoie wrote:
On Thu, 25 Jun 1998, Internet Microtec wrote:
Hi,
Is BIND the equivalent of Microsoft s windows NT
99 matches
Mail list logo
