I’m curious. Were the new repeaters the same model as the old? Were the new
repeaters set up as simulcast as well?
Jeff
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Andrew Seybold
Sent: Friday, August 27, 2010 6:16 PM
To:
Was the Repeater a republican, democrat, or independent???
Jeff
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of John
Sent: Sunday, June 27, 2010 11:09 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Harmful Taxing
The item is still available from pacparts.com. I would recommend checking
the price from an Icom dealer. Part # SC-1056
Jeff
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of x.tait.tech get real
Sent: Saturday, May 22, 2010 2:34 PM
To:
Is it a TK-860H or TK-860HG?
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of J C
Sent: Tuesday, April 13, 2010 11:01 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Kenwood TOS/COS question
I am
Have you tried here yet dheco.com
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025
Sent: Tuesday, March 30, 2010 9:55 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Doug Hall 4RV Voter
I use a bootable thumb drive with DOS 6.22 on a dual 1.8gHz laptop without
any problems. Version R03.01.02 Moslo not needed. Have also used the same
thumb drive on a Compaq P4 2gHz desktop without any problems. Might be just
lucky but.
Jeff
-Original Message-
From:
I had to clean up a site after someone used ¾ copper pipe for the halo.
Standard sweat solder connections. Shrapnel everywhere. So what is the
electrical properties of ¾ copper pipe after lightning has pierced through
it??? J
Jeff
From: Repeater-Builder@yahoogroups.com
ZHR-8
ZHR-3
ZHR-2
Connector terminals are SHZ-002T-P0.5
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of kc9ddi
Sent: Tuesday, February 02, 2010 10:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder]
Forgot to add the larger3 pin connector
PHR-3
Connector terminals are SZH-003T-P0.5
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Yahoo
Sent: Wednesday, February 03, 2010 7:22 PM
To: Repeater-Builder@yahoogroups.com
CNT-400-DB cable
RF Industries crimp connectors installed properly
Self vulcanizing seal + good vinyl tape
Cable strain relief
1.5db loss per 100' @ VHF
Tight bend radius
Jeff
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Vernon
Have used this set http://www.l-com.com/item.aspx?id=20878 for hundreds of
cables in varying sizes, mostly RF Industries connectors, crimped pin and
furel, swept with Anritsu. Use the right connector for the right job paying
attention to dissimilar metal properties, size etc. Take your time and
Perhaps a policy of turning off cell phones when
people enter the school would be more appropriate.
A learning environment is no place for a telephone.
-John
Stanley Stanukinos wrote:
As far as the ATT service goes you need to get to the Engineering
department so that your repeater
%2Eau%
2Fsearch%2Fsearch%2Easpx%3Fexec%3Dgo%26tp%3Dq%26gc%3D2%26tr%3D1%26lage%3D18%
26uage%3D55%26cl%3D14%26sl%3D0%26dist%3D50%26po%3D1%26do%3D2%26trackingid%3D
1046138%26r2s%3D1_t=773166090_r=Hotmail_Endtext_m=EXT
Yahoo! Groups Links
,
Len N2LEN
Yahoo! Groups Links
The service manual is in the Kenwood section of the sight.
Jeff
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Randy Brumback
Sent: Friday, April 10, 2009 4:06 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder]
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Yahoo
Sent: Wednesday, April 08, 2009 9:18 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] GE Monogram radios - follow-up
Maxon cables are serial and GE Monogram cables are parallel. Never had
(of this particular radio in front of me): 9250445 FCC ID #
F3JSP2850 DOC/MDC # 287 194 149P
That's all the markings that it had. Thanks again for your help in trying
to locate the software to program these!
Jim
Yahoo! Groups Links
The problem is reverse phasing 120 degrees (Motorola) vs. 180 degrees
(mostly everyone else).
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of NORM KNAPP
Sent: Wednesday, January 28, 2009 6:28 PM
To:
Yahoo! Groups Links
Take a look at the Antenex YDAF series. These antenna's are manufactured by
Bluewave for Antenex.
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Ron Wright
Sent: Thursday, May 01, 2008 4:43 PM
To: Repeater-Builder@yahoogroups.com
Press the LO key.
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of jcentv
Sent: Wednesday, April 30, 2008 6:14 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Field Programming of the TK-370/270
I have read a post
Yahoo! Groups Links
?
Ken
---
I am Shakespeare of Borg. Prepare to be or not to be
Yahoo! Groups Links
We would need more information for a proper response. Are you terminating
the unused ports in the LAB? If the amplifier is 22dBm then 24dBm would be
normal.
Jeff
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Kent Chong
Sent: Wednesday, January 09,
You can download it for free at www.connectsystems.com
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of ASK ME
Sent: Saturday, August 04, 2007 7:31 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] CSI TP-163
hello
Have you checked for proper primary power connections. Sounds like a voltage
drop problem. Poor power connections or shorted PA?
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Lyon
Sent: Sunday, March 18, 2007 12:15 AM
To:
Absolutely correct Eric. The TKR-750 comes factory tuned for wideband base
station operation. The TKR-750 does NOT like anything but a good 50ohm load.
The transmitter will go spurious. I have never had a problem with a version
1 or 2 with a properly matched transmit path. Maybe just luck. I have
Read and save each radio programming. Then swap the programming.
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Loren James
Sent: Saturday, March 10, 2007 11:12 AM
To: Repeater Builder
Subject: [Repeater-Builder] ic 221
greetings, I
for the off topic, but does anyone know how to get into the front
panel programming on this radio? I held in the monitor button but that does
not work. Thanks.
Mathew
Yahoo! Groups Links
There are a number of old post on this subject. Take a look at the 4 bay
dipole antennas from Antenex (made by Bluewave). VERY broadband. As for
whether or not they are expensive is a matter of personal opinion.
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
Yes, the TA remains hot but I need flat audio. I can call Kenwood tomorrow
but was hoping to finish this tonight. It could be a firmware problem. I
can't imagine why they would purposely mute the line when QT encode is
programmed.
Jeff
-Original Message-
From:
31 matches
Mail list logo