I am looking for someone that can help me with a Regency Repeater.
What I need is to know whatt to do to get the controller
disconnected so that I can use the reciever/transmitter from this
unit to connect to a Link Communication RC4L Contoller board.
Appreciate the help. Thanks.
Mathew
Is anyone here well versed with the Link Communincations Controller
RLC-4 that could answer some questions regarding the DVR? What I am
looking to find out is if there is a way to make the contoller send
a DVR message at any period of time without having to call it up.
Thanks for the help.
I have a motorola Motrac Radio, can anyone tell me if this unit can
be converted to use as a repeater, and what is needed for the
crystals. Any help on this would be appreciated. What could be
used for a simple controller with little to no hangtime? Thanks.
Mathew
Yahoo! Groups
Thanks for the tip. Well it was worth a try. I had it given to me
for use as a repeater. It's a new unit that never even got used, but
sad to say the ovens are gone. Suppose it's a good boat anchor.
Large paper weight.
Mathew
--- In Repeater-Builder@yahoogroups.com, Mike Morris [EMAIL
Hi Mike, basically what I wanted it to do is to announce messages at
periods during the day, such as club meeting, welcome messages, and
such. I guess it's back to the trigger thing, just will have to play
with it, or get another controller. Thanks
Mathew
--- In
Well I have been given a lot of good ideas here, and will give them a
shot this weekend when I begin to put it all together. I do
appreciate the help here very much.
Mathew
--- In Repeater-Builder@yahoogroups.com, Ken Arck [EMAIL PROTECTED] wrote:
At 08:15 PM 3/30/2004 -0500, you wrote:
Anyone around NW Indiana that would be interested in helping me get a
set of duplexers aligned as well as align my receiver and transmitter
as I don't have any equipment for doing this. It would be greatly
appreciated. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the
Does anyone have a copy of the manuals for either of these
antenna's? Would be happy to pay for cost of copies and shipping,
any idea where they can be downloaded from the net. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
I am looking for a PL Deck to use on my repeater. If you have one
lying around that you would be willing to sell at a fair price, drop
me a line. It needs to have a pl of 131.8. Would be nice to have
instructions with it as well. Thanks. Email me off thread if you
wish at [EMAIL
rf through it. I get zero power
out, and that is just using the exciter. Any help would be greatly
appreciated.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email
I have surplus to my needs an SCOM 5K controller. Was going to use
it on my repeater, but ended up with an RLC2 Controller. $135.00
shipped to lower 48. Has the latest revision 1.79. Would consider
a trade for quality vhf receiver that is tuned to 146.325 that has a
COR output on it.
Can anyone tell me if there is suppose to be any voltages present on
the RLC2 controller at the serial port connection. Here's what is
going on. System has been running fine, as I have been building the
repeater over the last few weeks. It has been powered up by my
Astron 70 amp power
I am looking to purchase a SINAD meter. Please email me with make
and model as well as price and condition and last calibration.
Thanks. email to: w9mwq at direcway.com
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder
I forgot, it needs to be a 5 watt drive amplifier. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is
I am looking for a continous duty amplifier for my 2 meter repeater,
transmits at 146.925. Must be for a 19 rack mount. Looking for
something in the $300.00 and below price range. Let me know what
you have, shape, cost, make and model, fans or no fans etc...
Thanks.
Mathew
w9mwq
,
T - Trunk mount
7 - 110W
3 - VHF Hi 132-174 MHz ***
RTN - Model Series
3 - PL Squelch
19 - 4 TX/RX Channels
0B - Misc version info
*** REPLY SEPARATOR ***
On 4/22/04 at 3:13 AM w9mwq wrote:
Does anyone know whic band this micor
I am in need of an operation's manual for the IFR-500 Service
monitor if anyone has an extra lying around or one they would be
willing to part with. I would even accept a photocopy. Happy to
pay for cost of copying. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the
I have a repeater with an antenna up about 60 feet in the air,
Frequency of 146.925/146.325 minus offset. Receiever sensitity
is .25 micorovolt at 12DB, seems to be purring along just fine. IFR
show the receive to be on frequency. Here's the problem, there is a
repeater about 50 air miles
Is there any methods of tuning a set of duplexer without having a
Spectrum analyzer. I am in the learning stages again. I have an
IFR-500a, so I can generate a signal into them. I know this would
work somewhat for the receive, but what does one do for the
transmit.
Mathew
Yahoo!
Would anyone be willing to look at this Spectrum Analyzer and give
me thier opinions on it. I realize it's not the IFR or Motorola
service monitor with analyzer, but for basic use and it's price,
what do you think. It's on ebay, and the transaction number is
3812108141. Any input would be
Wondering what type of radios are available for use as voters for a
repeater. I am told that it is best if all the receivers are the
same for the voters, my plans are to use all micors of the same
chassis. Is this true as well for the transmitters? What my plans
are is to use the Doug Hall
I have DB-304 antenna that at 156.100 gives a 1.2 VSWR at 50 ohms,
looks real good. I want to use this antenna at 146.925, shows a
VSWR at 1.5:1 at 74 ohms. What could be done to get this to a 50
ohm impedance? All help would be greatly appreciated.
Mathew
Yahoo! Groups Links
* To
Would anyone happen to have a spare power plug for the Maxar 80 VHF
mobile radio, also can you tell me if there is a jumper on the power
cord that connects the speaker audio through. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
Does anyone have a spare motorola micro/synto key lying around they
could spare. I have four of these radios and cannot open them as no
one sent me a key. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
Question is, I a am putting a remote base on my RLC2 controller with
the RBI-1 interface. All is working ok. What I need some ideas on
is how to keep the transmitter from killing the receiver of the
repeater? What can be done to isolate the two radios. The radio is
a Kenwood TM-731 and is
I have a crazy thought, but I want to get some opinions. Here is
what I am thinking, only becuase I can construct them very cheaply.
As opposed to using a verticle, what would I expect if I used 4 10
element verticle beams, one point to NWSE, coupled with a power
divider. My objective in
Can anyone recommend a god or decent ISO-Tee Coupler. Using it to
tune duplexers. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL
Several people responded to my need for an amp, and thought we had
one donated, however turns out it was no count, good intentions on
the gentleman's part. As funds are low for the reapeater project, I
would like to entertain a trade on a full duty cycle 2 meter
repeater amp, 5 watts or less
Just wanted to say thanks to all those that replied to my remote
base project. Some frequencies can be used, 52 simplex work out to
be the best of them all. So no no 2 meter remote base, 440 and 220
should work fine.
Mathew
Mike, thank you for the confirmation.
Neil
Mike
I have aquired an amp for the repeater. It is a Motorola Micor Amp,
TLD1693E Amp. Does any one know the power input requirement and
what the power output should be on this amp. Also the SWA goes to
ground to key the amp, how would I be able to find a circuit inside
the exciter that goes to
I am looking for someone that can help with the programming of a
Motorola Syntor 8 Channel Radio. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
I am looking for a Micor Amp TLD1692 rack mount amp. Email me off
list with cost shipped to 46366, condition of amp. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send
I have a Micor TLD1693 amp, designed for the 150 to 162 Mhz range,
and am told that the amp will not operate at the 146 Mhz range, told
that componets have to be changed. Here is what I don't understand
about it, maybe someone can help expain it. Into a Cushman serive
monitor, I'm getting
Wonder what type of setups operators are using to connect a weather
radio to thier repeaters. I am using an RLC2 controller. What is
the easiest way to connect it up. Ideas. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
Can anyone tell me for testing purposes if there is a way to set the
tones off on a weather radio. What is the sequence they use to make
them tone off?
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To
Anyone familiar with the GE Century II radios that can help with a
PL problem that I am having. I want to use this radio to replace
the sad Regency that is in use on the repeater now, and you all know
the troubles I have had with that one. Anyways, I got the receiver
tuned, sensitivity of
I need to talk with anyone that is well versed with the Cushman
Monitors, more like the 6030. I am used to working on an IFR, I got
the Cushman now, and I am not so sure I am reading the sensitivity
dial correctly. Having taken a receiver to get it checked on a
service monior, IFR1200S, now
I'd like to get some input on what is available for 2 Meter's for an
antenna. I've considered using 4 beam antenna's, and yes I have
seen this setup, don't know exactly how it is working, but there is
a setup in Valparaiso that has three 8 element beam antenna's side
mounted on the top of a
Anyone have a good source available for any of these transistors.
Need to replace a few in some amps. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
Need some input on this, what others think. I am trying to pull all
the Regency stuff from the repeater, only thing left is the
transmitter. I want to use a Yaesu FT-10R as an exciter for the amp
to the repeater. What are some thoughts on this. I only need a
half watt to drive the amp.
I just got a 4 channel micor radio, T73RTN3180B radio, actually two
radio's and one set on control heads. The radio comes on, has good
volume, and squelch works, but there is no receiver sensitivity, nor
power ouput. Both radios do the exact same thing. I'm thinking
control head, but
I know this is a bit off thread, but can anyone tell me what the
actual frequencies of these radios should be. I'm getting some
weird ones out of them, mid channels if you will. Like 467.761, but
freq chart says that should be 467.775. Is this true or is this
unit I have just off frequency?
I have been looking into setting up a GMRS repeater for community
access, and have been doing some reading on them. I am coming up
with conflicting stories and need to know. What can be used as far
as a repeater. I am told it has to be a certain type, then I read
where they are building
I need a little advise here. I want to test my repeater's
sensitivity through the duplexer's while the transmitter is keyed
up, into my Cushman Service Monitor. What is the best method of
doing this? Do I need an isolator of some sort, or will the service
monitor handle both the incoming
A little off thread, but maybe someone out there has them. I am in
need of two PL Tone boards for the Motorola Spirit SU21 Handi
Talkie's. If you have two working units, please email me off post
with your cost including shipping to Indiana. Thanks.
Mathew
Yahoo! Groups Links
* To
, will not repeat, and just keeps
triggering the relay on the controller. I have to do a complete
system reset in order for it to come out of it. Any ideas as to
what is happening? Thanks for the help.
Mathew
w9mwq
Yahoo! Groups Links
* To visit your group on the web, go to:
http
It is using a seperate power supply from the controller, a RS 1 Amp
walwart type supply. Does not appear to be abnormally warm.
Mathew
W9MWQ
Could be dirty power caused by excessive ripple on the supply, a
bad
connection, or some other type of noise riding in on the +12VDC.
Chuck
I am in need of about 20 hardline clamps to secure my 7/8 hardline
to my tower. Must be able to fit a 2 tube. Please email me off
post with what you have and cost. Thanks.
Mathew
w9mwq
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group
, so be easy on me. Needs to have COS and
receiver audio, and is being hooked to a RLC 2 controller board.
Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send
Before I ordered one, I thought I would take a stab at it. Would
anyone happen to have an extra receive xtal freg 146.325 for a GE
Mastr Progress Line receiver? Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group
--- In Repeater-Builder@yahoogroups.com, w9mwq [EMAIL PROTECTED] wrote:
Before I ordered one, I thought I would take a stab at it. Would
anyone happen to have an extra receive xtal freg 146.325 for a GE
Mastr Progress Line receiver 4ER41 Series. Forgot the model #.
Thanks.
Mathew
Can anyone tell me about this tone board and would it be a good
choice to use on an repeater, the receiver that it will be hooked to
is a GO Mastr ER41 and how hard would it be to hook up? Or would it
get hooked to the RLC2 controller on the cos line?
Mathew
w9mwq
Yahoo! Groups
I am working on a Mastr ER41 receiver which has low audio output.
WOndered if anyone has run accross this before and where to look. I
have not done any trouble shooting at this point, but thought by
chance if is was a common problem someone could point me in the
right direction. Thanks.
Is there anyone on the list that is familiar and versitle with the
Cushman CE-6030 series of service monitors that could help me. I
need some assistance on how to read the sensitivity dial better than
what I am. All help would be greatly appreciated.
Mathew
Yahoo! Groups Links
*
I know what this question can lead to, and I know dual band
antenna's are not recommended for use on repeaters, but this is a
short term use, (Winter), need. Is there anyone that is using a
dual band atenna on their repeater system with a duplexer to split
the two bands. What I am
Can anyone identify these Midland units and tell me anything about
them?
Midland VHF Receiver 71-3052A
Midland UHF Transmitter 71-5151A
What part of the spectrum are they in, will they work in the ham
bands. Any ideas. Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your
but that made no difference. Any ideas.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject
off list on that as well. Thanks for
the input. BTW, thanks to all whom has offered support this far, the
repeater is coming along just fine and workign quite well.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater
--- Yahoo! Groups Survey --~--
Please help us to improve Yahoo! Groups. Take the survey now!
http://v2.decipherinc.com/survey/yahoo/yah04021?list=2
~-
Wanted to find out if anyone has
Does anyone know of a site that has a good collection of repeater
related audio files. Preferebly courtesy tones and general
announcement. Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder
Can anyone tell me a good point inside of the Uniden IMU250K radio
where to obtain a good audio output for the controller other than
the speaker output? Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater
Is anyone able to assist me in finding a point for discrimated audio
inside of the Uniden IMU250K mobile radio. All help would be greatly
appreciated. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
*
Does anyone know if the TS-64 can be fully connected to the H4
connector inside of the controller. I just read this on their site,
but am unclear about if I just hook each wire as they say, but what
about the transmit part. Anyone familiar with this that can assist
me with it. Thanks.
, has a rca type connector on it. Or would it
make more sense to change the connector on the receiver to a type N
chassis mount. Just not real fond of the adapter I had to use to
convert it. Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
* To visit your group on the web, go to:
http
Is there a way to make the audio coming into the repeater a little
more basey, like would adding say a 47 Ohm resister do it. Seems
like certain users voices are very tinny sounding. Any thoughts.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
Keep the roar down, but am trying to figure what one would expect
the distance of a 440 repeater to be with 20 watts out, into a
Diamond Antenna up 50' fed by 7/8 hardline, 6 DBi of gain.
The user on the other end is using a base antenna, not sure of type,
but about 50' and cannot hear the
I know I've brought this subject up before, but have lost all the
emails about it. I need some help building an RF Coupler Iso-Tee to
begin learning to adjust duplexers. Someone gave me some
instructions on how to build one out of a pl259/so239 t adapter.
Anyone have this information, or
://www.anglelinear.com/repeaters/repeaters.html
73, Eric Lemmon WB6FLY
w9mwq wrote:
What type of preamps are available for VHF to enhance the receive
of a
repeater? I know, if you can get by without it, it's better off,
but
this is only a temporary attempt, to see if it makes an
improvement
Thanks! That is the one I found and downloaded a few days back. Was
the only one I found actually. Going to work on them this week and
see how they come out.
Mathew
Info on the bandpass cavities in question:
http://www.repeater-builder.com/db/db-band-pass-cavity-filter-
Where is a good outlet that sells some of this highly talked about
RG214/U Cable? Need about 30 feet of it. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an
Anyone have any idea how to identify a set of TX-RX duplexers for
the 450 band if there is no tags on it. The setting of the freq
that was written on them is 456.150. Any help would help.
Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
Can anyone tell me what frequencies can be used for links back to a
2 meter repeater? I've look at a band plan nothing even relates to
it. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To
Anyone know any good books that will teach me how to go about tuning
duplexers. I've downloaded several articles, but need something
that goes in depth. Or if anyone is willing to work with me, it
would be appreciated. I have a Cushman CE-6030 SM to work with
here. Thanks!
Mathew
As far as tuning, that I cannot be of any help with as I was not the
one that tuned mine. I'm not sure if he is on the net, but you might
contact W9LVY is the gentleman that tuned mine when it was done.
Mathew
I've seen them in 75W Micors here, mostly used by SBC. Under the
metal
cover
I am going to use two of the Decibel Products DB-4001-1 Filters on
the receive side of my repeater once I connect a preamp this week.
What I need to know is, is there a certain length the cable has to
be between the two cavities that connects them together as well as
between the preamp and
Just want to get some input on what users think. I have the option
to mount a DB224 on the top of a tower or side mounted at the top,
which would be best, in regards to noise verses stability, etc.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
Everyone remembers my problems I had with a neighbor about 26 miles
away getting into my repeater on the input with his 9Khz wide
transmitter, which the GE MASTR receiver took care of that, but I
just installed a ARR preamp, and he is back, and I think I tuned
them correctly, the DB-4001-2
Can anyone tell me about these radios, if they are xtal controlled
or programmable, or any other information about them. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this
I am in the market for an inexpensive GMRS repeater, prefer
something self contained with duplexer, and under the $500.00 price
range. Email me with what you have, including make, model, power
output, etcPictures if possible. Thanks.
Mathew
Yahoo! Groups Links
* To visit
I had something brought to my attention yesterday on my 2 meter
repeater. ABout 15 miles away, I'm being told that my repeater can
be heard on the output for about 20 to 25 Khz away. From what I am
told, it is not legitable, but it's there. The transmitter is a
Majorrie Hi-Pro running
I want to say thanks to all those that replied on this matter, I
believe I have it fixed. Found that the deviation had changed and
was running at about 6 Khz wide. Not sure why, unless a pot had a
dirty spot on it. Everything looked ok on the spectrum analyzer.
Someone asked why I was
Would anyone have a spare programming cable available for the
Standard GX1500U radios they are willing to part with? I have some
that I need to program. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
Anyone have the spacing information on the DB224 antenna with the
new phasing harness? I just got on in from Cook towers today,
elements are the right length, now just for the spacing information.
Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
Due to change in plans, I will not be needing these radios after I
got them. So they are up for sale or trade for something of need.
They indeed no not have the TXCO's in them.
Mathew
71-3052A is 136-156mhz Rx
77-5051A is 406-430mhz 5 watt exciter
Yahoo! Groups Links
* To
Last night my power supply took a dump! Good thing for backups.
Anyways, what I am wanting to do is put 3 marine batteries together
to run the power for the repeater with a charger to charge the
batteries. If I use a 12 Volt Car charger, do I risk the chance of
noise, or would the
Ok, I know this sounds silly, but my repeater is now hearing better
than it transmits. Here's the setup, the the issue. I have a
Maggorie (no comments) HiPro transmiitter running 2 watts into a
Vocom Amp running 160 Watts into the duplexer, 130 out to the
antenna, fed with 7/8 hardline
Just need a short memory replacement here please. I'm working on an
Astron 35 amp power supply, hope to get it going again. I'm
checking the transistors in the unit, and not sure if I remember
correctly. On my vom, in the diode checking position, I should have
a dead short from case to
Well I applied the new harness to the DB-224 today and it came out
just fine. Actually the element's did not end up into the mounting
section of the antenna like I had thought it would. As it turns
out, I had to move the bottom elemnet up an inch or so. It looks as
if the previous owner
I am curious to know what others have resulted from changing the
elements and harness to the ham band as far as SWR and impedance. I
want to see how close this one came out. I know what I would like
it to be, but what others has gotten is more important. Thanks.
Mathew
Yahoo!
WHat is the easiest way to obtain a COS circuit. Actually what I
need is on the remote receiever units, it will require a seperate
COS circuit. I could use tone boards, but thought there might be an
easier way to accomplish the task. Any ideas?
Mathew
Yahoo! Groups Links
* To
I'm getting ready to hook up and RVS-8 Voter system to the repeater,
and am having an issue with the main receiver. Here's what's going
to happen. THe main receiver is a Master II ER41. I am going to
use Kenwood TM-V7's for the remote receiver's, but I am unclear as
how to get the main
Well it seems that I am told I have to change frequencies, has it
that one of my users interferred with the same troublesome repeater
I've had all along, and now the coordinator says I have to move.
Not sure how well all the equipment will handle the change. Here is
what I have as equipment,
Due to the recoordination of my repeater, I'm looking for that Elmer
to help me along the way retuning this set of duplexer's. I have
the tuning instructions and have a Cushman CE-6030 service monitor
with an analyzer, but not sure just what to do. I have everything
it talks about in the
I am in the process of hooking up the RLS1000 to my Cat1000B
Controller, but I also have a WX-200 hooked up to the system. The
instruction tells me to wire control lines 5,6, and 7 to J1 on the
Cat1000, but that is where I have control lines for the WX-200.
There is connections already
I need someone whom has a set of the 28-37-02a that can help me with
the cable arrangment. I think there is a possibility that some of the
connecting cables may have been placed back on wrong. I can't say for
sure, but help would be appreciated.
Mathew
Yahoo! Groups Links
* To
after I had it explained why it was not working. In the
end, no decense on the receiver what so-ever, and all the power is not
transferred forward from the transmitter.
Just have to remember, the signal goes one way, and the notch goes the
other, and then it all comes together.
Mathew
W9MWQ
Can anyone tell me if the Vocom VCC200 amp is a narrow band amp?
Meaning if it is tuned for 146 Mhz, will it be wide enough to goto
145, below the middle of the band? Can they make them narrow ennough
to only go 1 meg? Also if anyone has any tune-up information on the
amp, that would be
What are the thoughts, I am using two of the DB4001 filters on the
receive side of my repeater before a preamp, and what I want to know
is should both of them be set to pass the receive frequency of
repeater, or should one be set to the transmit frequency? What is the
best method?
Mathew
me offlist at w9mwq at yahoo dot com.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http
Can anyone tell me, I am using a TS-64 tone board wired directly into
the cat1000B controller, and for some reason the output of the tone is
very weak, and that is with the pot turned all the way up. It is less
than .800 KC and used to be about 1.3 before I changed the frequency
of the
1 - 100 of 106 matches
Mail list logo
