Sorry, NO. A sender will not work as a sponder.
- Original Message -
From: Eric Lemmon
To: Repeater-Builder@yahoogroups.com
Sent: Monday, August 09, 2010 9:13 PM
Subject: RE: [Repeater-Builder] Can a KLN 6210A vibrasender be substituted
for a KLN 6209A vibrasponder?
something MHz given to me by the sheriff when they got new equipment. I
reworked all the tuning coils and moved it to 52.525 MHz and used it for
years. Those tubes looked nice at night with the lights off. Sid. WA4VBC
--- In Repeater-Builder@yahoogroups.com, Captainlance Captainlance
Wow.. memories... A Link 50UFS low band base station.. We have one here, too...
Still works.
Lance N2HBA
- Original Message -
From: La Rue Communications
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 27, 2010 4:20 PM
Subject: Re: [Repeater-Builder] showing our age
I've sent a few of these back to cresend, they tuned them for the ham band at
minimal cost, and they have worked for years.
lance n2HBA
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, July 22, 2010 8:21 PM
Subject: [Repeater-Builder]
From real lfe experience, Does it really make a difference what rules are
promulgated? GMRS in NY is nothing but a waste of spectrum. Foul mouthed,
profane, and down right illegal use is the norm now. Add to that, groups that
own their channel with the apparent blessing of the FCC who will not
Henry amps are simple to decode... C70D10 that you have: 70 watts out, 10 watts
in? see?
Lance N2HBA
- Original Message -
From: Ken Arck
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, June 20, 2010 8:33 PM
Subject: Re: [Repeater-Builder] Henry Amplifier
At 06:23
On the encoder board, directly under the reed socket is a molex-type pin.
grounding that kills the TX pl...( as with the factory paging option)
Lance N2HBA
- Original Message -
From: ve3hxp
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 04, 2010 9:02 AM
Subject:
I have Celwave units, brand new.. high quality, and cheap. $50.00 post paid.
We use one on our repeater, resultant sensitivity is .15uv.
Lance N2HBA
- Original Message -
From: surf_boy82
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, May 02, 2010 3:06 PM
Subject:
Moto. never made a low band version.
We were moto. dealers for many years, only VHF and UHF, DPL or PL...
- Original Message -
From: Bill Smith
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, April 21, 2010 6:00 PM
Subject: Re: [Repeater-Builder] Motorola R100 lowband on
How about the TXRX duplexers? UHF I assume..?
Lance N2HBA
- Original Message -
From: La Rue Communications
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 2:37 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
This is a photo of some of the
Hmm..But can it core an apple???
Happy April 1st..
Lance/N2HBA
- Original Message -
From: Kevin Custer
To: Repeater-Builder@yahoogroups.com ; repea...@yahoogroups.com ;
repeat...@yahoogroups.com
Sent: Thursday, April 01, 2010 6:48 AM
Subject: [Repeater-Builder] Nice article
UHF take 1.5 watts, VHF 450mw.
- Original Message -
From: gervais
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 24, 2010 9:59 PM
Subject: [Repeater-Builder] Micor Big PA,what drive?
hi all
i have some PA from old Micor i dismantled some years ago and
Chicago Lock Co, key # 2553
- Original Message -
From: Gary Schafer
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 23, 2010 10:54 PM
Subject: RE: [Repeater-Builder] Motorola cabinet key wanted
Hi Bill,
The key is like a 2135 and a 2135 will fit in
RN3 is the crystal type, all the 4 pin ovens are the same.
lance
- Original Message -
From: wa7spy
To: Repeater-Builder@yahoogroups.com
Sent: Monday, November 23, 2009 8:42 PM
Subject: [Repeater-Builder] WTB Motorola RN-3 crystal oven
Does anyone have any Motorola
11/23/2009, Captainlance wrote:
RN3 is the crystal type, all the 4 pin ovens are the same.
-Sounds like someone is resurrecting a Motrac?
--
President and CTO - Arcom Communications
Makers of repeater controllers
I'll take them.
lance/N2HBA
- Original Message -
From: sjotrollet
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, November 14, 2009 12:36 PM
Subject: [Repeater-Builder] FS: 1960's Vintage FM magazines
Following items from an estate. SK was deep into VHF/UHF and
on my hands, and a
local club needs a repeater so I'll git 'r' done and turn it over to them.
Thanks.
de Lee
K4LJP
73
On Fri, Sep 18, 2009 at 1:46 PM, Captainlance captainla...@optonline.net
wrote:
Check the back of each chassis, receiver and transmitter
Check the back of each chassis, receiver and transmitter for the applicable
model numbers, the radio you have is probably a CR1000, CR1010, or CR1100
made up of basically 2 mobile radios hung on pull out rails. The later ones
have the chassis in pull out boxes, sort of like small rack units.
I
The first Motorola series to use PL was the 10 inch G series, circa 1957
check T43G,(vhf) T41G(lb), etc.
- Original Message -
From: burkleoj
To: Repeater-Builder@yahoogroups.com
Sent: Friday, September 18, 2009 9:35 PM
Subject: [Repeater-Builder] Re: Anybody have some REALLY
no mods required, other than tuning. I have 2 on 441, both pout out rated
power. check the regulated 12 volts to the tripler, the molex plugs on the
interface board tend to be intermittent and /or resistive...
the exciter board should be making about 350mw to 500 mw..if working correctly.
lance
WE would be very interested in your supplying us with the list of the many
paper repeaters on 2m. in your area that you claim to be on 2 meters.
lance Alfieri
President, MetroCor, Inc.
- Original Message -
From: rahwayflynn
To: Repeater-Builder@yahoogroups.com
Sent: Sunday,
, Captainlance captainla...@...
wrote:
WE would be very interested in your supplying us with the list of the many
paper repeaters on 2m. in your area that you claim to be on 2 meters.
lance Alfieri
President, MetroCor, Inc
yes, no problems.Just keep the drive between 1.5 and 2 watts, with the power
set adjusted for 80 watts or less at the antenna port...
Lance N2HBA
- Original Message -
From: k0jxi
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, May 09, 2009 12:52 PM
Subject:
Motorola Spectra-Tac receiver. usually avail. on Ebay for about 75.00 to
100.00, they are exactly what you want. if you can't find one locally, I can
help you.
lance N2HBA
- Original Message -
From: John Transue
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, April 14,
Intermittent duty Micor base station power supply.. rather rare, most stations
used the HD one.
lance
- Original Message -
From: Merrill
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, March 26, 2009 6:05 PM
Subject: [Repeater-Builder] supply
can anyone identify this
BRAMCO reeds were made for a number of 2-way companies over the years, the
color of the reed in meaningless. Each manufacturer selected what they wanted,
light blue, dark blue, red, silver, bronze, etc. likewise, coil impedances
were variable as well, from 500 to 5K ohms. if you have the stock
NEAL;
Call me today if you can. Lance / 516 935 6249. I lost your phone #.
- Original Message -
From: neal Newman
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 01, 2009 1:24 PM
Subject: RE: [Repeater-Builder] 6 meter mastRII Base
to the Brain trust
I have a few, all 100% working, clean. uhf and vhf, 50.00 each, plus shipping.
(desk models)
Lance N2HBA
- Original Message -
From: Chris Curtis
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 24, 2009 2:32 PM
Subject: [Repeater-Builder] WANTED: exec II desktop
Where are they?,complete or parts?, cabinets? how many and how much?
Lance N2HBA
- Original Message -
From: Maire-Radios
To: Repeater-Builder@yahoogroups.com
Sent: Monday, February 16, 2009 6:10 PM
Subject: Re: [Repeater-Builder] Micor Repeater
FYI have a number UHF 460
I have one from a Spectrum repeater power supply..25.00, shipping included.
Lance N2HBA
- Original Message -
From: lou_c1357
To: Repeater-Builder@yahoogroups.com
Sent: Friday, February 06, 2009 1:35 PM
Subject: [Repeater-Builder] Power Supply Transformer Supplier
yes, the radio you saw was a Vocaline... about 5 watts input. Class B was short
lived to be sure, it never gained much use as there was almost no supply of
usable equipment.Class A was different, 50 watts, FM, using commercial
equipment, GE, Motorola, RCA, LINK, etc. many taxi companies took
That's perfectly normal.
lance N2HBA
- Original Message -
From: mike
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, December 18, 2008 9:19 PM
Subject: [Repeater-Builder] Micor UHF Receiver
I looked in the files section but didn't see anything about the
Hello,
I serviced many of these back in the day... the 1010 is a slightly later
version of the 1000, both are good units, and will retune into the ham band
with little or no modification needed. The crystals are very 'finicky', do not
try to replace them yourself, only International Crystal can
The PA is only factory rated at 78 watts...there is no 100 watt Micor amp. Some
however, will do 100...
Lance N2HBA
- Original Message -
From: georgiaskywarn
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, October 30, 2008 5:44 AM
Subject: [Repeater-Builder] Micor PA
statement
Gary
- Original Message -
From: Captainlance
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, October 30, 2008 10:11 AM
Subject: Re: [Repeater-Builder] Micor PA schematic / Power
Control Board
The PA is only factory rated
602 275 4505, ask for Sid
lance/N2HBA
- Original Message -
From: Glen
To: Repeater Builder
Sent: Monday, September 15, 2008 1:52 PM
Subject: [Repeater-Builder] air com
Does anyone have a phone number or web site address
for Air Com in Phoenix. The aircom.com does
Yes, I have used several of them, and have the factory tuning sheets for both
10 and 6 meters, i will dig them out and get back to you ASAP..
lance N2HBA
- Original Message -
From: Harry Miller
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 09, 2008 1:45 PM
Both elements are interchangeable, only the stability is different, 2.5 parts
vs. 5 PPM
- Original Message -
From: fxbuilder
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 12, 2008 11:46 PM
Subject: [Repeater-Builder] Re: kxn-1024 conversion
Perhaps someone
We have found that 12v. fans do cause interference with our link transmitters
for the NYC voting network. The solution we found is taking one of the 2 power
supply chokes from an old Micor mobile radio and using it in series with the
12v. lead to the fan, add a cap. 2000 mfd or larger from fan
Wanted to buy: Motorola TLN6824/KLN6210 encoders, 136.5 Hz.
TLN8381 DECODERS 136.5
Any quantity accepted.
Lance Alfieri N2HBA
[EMAIL PROTECTED]
Speaking of odd ball power problems,
I have a new in box Astron model 4812-20 converter. 32 to 56 volts input, 13.8
volts out @20 amps. Great for shipboard or railroad use... $40.00 shipped
anywhere in USA
lance N2HBA
- Original Message -
From: Dave VanHorn
To:
I am seeking a Maxtrac, Radius, GM300, type radio UHF, LOW power, (2
watts)mobile radio.
Originally sold for low power industrial channels.
Lance N2HBA
The main supply is only used for the PA, so a bit of AC there won't cause hum
in the audio. Check the regulated 9.6 and 12.v supplies on the PC board, these
tend to dry out the 100uf caps causing hum. A simple check with a scope will
tell all. Motorola's spec on AC is 60millivolts, max. on any
if you have rg142 available, it's functionally the same type of cable.
- Original Message -
From: vk4cya
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, January 10, 2008 4:21 AM
Subject: [Repeater-Builder] cavity duplexer
Hello to the group,
I have just joined the
HI Scott,
Yes, I've seen and dealt with them before.The isolation isn 't the greatest, we
had a few in public safety systems years ago, the only way to get good
duplexing was to add a pass cavity in the rx and TX.( We ran about 1mhz.
spacings) They are actually DB Products private labeled with
Yes,it's a tad expensive, but it is remote control...!
Lance
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 22, 2007 3:55 PM
Subject: Re: [Repeater-Builder] Wow!!! only $449
It doesn't even have the Extender
Check out COMTELCO antennas, they are on the web at www.comtelcoantennas.com I
have many of them in service with 100% results. They are equal in gain and
performance to other more expensive antennas. I recommend the ones with 1.5
inch tubes, not the smaller 1inch tube models.
Lance
-
You can use the caps you have, the reason for them is to lower the resonant
frequency of the coils, a small change in value will only move the location of
the core slightly. Not a problem.
- Original Message -
From: fxbuilder
To: Repeater-Builder@yahoogroups.com
Sent:
I use 2 of these, try adding an additional pass cavity on the RX side.it
improves the performance greatly. Also, check the duplexer with an return loss
bridge and a tracking generator. The slightest off-tune of the unit, especially
the rejects and you get noise.I assume that you are suing
it will cause no trouble. The main difference in the 2 reeds is the size.
- Original Message -
From: tony dinkel
To: repeater-builder@yahoogroups.com
Sent: Wednesday, November 07, 2007 12:57 AM
Subject: [Repeater-Builder] Micor spectratac tone board reed question
I have
Comtelco makes a REAL dual band antenna, rugged, and great quality. Costs about
300.00. For a diplexor that will handle the power and not kill off the weak
signals, the only choice is TXRX Systems, they make both tower mount and base
mount units,super quality, Wew have used several of them on
We have done numerous installation of small in-building repeaters in high rise
buildings in New York City. We drop cheap rg213 down the elevator shaft,
securing it of course, and about every 3 floors install a T connector with a
1/4 wave antenna made of solid wire soldered into a PL259. works
Check out Comtelco antennas, you will find them online. We use several of them,
very good quality, reasonable cost.
lance/N2HBA
- Original Message -
From: Jay Urish
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, September 20, 2007 10:32 PM
Subject: Re:
If the duplexer is correctly tuned, there will be NO measurable SWR into it. If
you have 25/60 watts, it is way off frequency.
- Original Message -
From: dallasreact112
To: Repeater-Builder@yahoogroups.com
Sent: Friday, August 24, 2007 7:16 PM
Subject: [Repeater-Builder]
Wow... that's old. The best is the T44ransmitter.. 450 mhz, 12 watts with a
pair of 2C39's. and a 41V receiver.with the 60KHZ if filter still in!
Lance N2HBA
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 31, 2007 6:11 PM
Subject:
Receiver reed is a TU333, transmitter reed is a TU217
- Original Message -
From: lenaw12
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, July 15, 2007 8:31 PM
Subject: [Repeater-Builder] Any Motorola banana reeds still around?
I could sure use a 100.0 cycle Vibrasponder
Yes, a U51GGT on 10 meters, and a U43GGT on 2 meters... also a GE Progress line
on 2M, ( MT36)... and a DuMont 5814, 2 meter, 6 volt in my 1950 DeSoto !
Lance N2HBA
- Original Message -
From: JOHN MACKEY
To: Repeater-Builder@yahoogroups.com
Sent: Monday, July 16, 2007 7:23 PM
It is the pass frequency.
- Original Message -
From: George Henry
To: repeater-builder@yahoogroups.com
Sent: Tuesday, July 10, 2007 8:56 AM
Subject: [Repeater-Builder] Notch duplexer dumb question
I have a Motorola TDN7407A notch duplexer (in reality, a Motorola-branded
Making the Micor repeater work with a RC210 controller is very easy, I have 6
of them in service now.
leave the station logic card in the rack, throw all the rest away.
make sure that jumpers 1,4,and 5 are on the back plane. cut any others.
jump pins 6 and 14 on the lower row of pins on the back
We have about 19 Spectra-Tac receivers online in our network, here are a few
normal problems that you should check.
1) The power supply eats the 100uf caps like crazy, especially after 25+ years
of use, we change them both as routine maintenance.
2) Likewise, on the audio board the same thing,
I have had the opportunity to check the db408 with an Anritsu, the antennas
seem to have very low VSWR at 442.4, 447.1, 453.4 and the best at 459.8...I
don't see why these wont work great throughout the band.
Lance N2HBA
- Original Message -
From: Paul Finch [EMAIL PROTECTED]
To:
I have several Vocom amps in service, Cresend backs them up 100%, their service
and response is nothing less than fantastic. never had an issue with them.
Lance N2HBA
- Original Message -
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, April 24, 2007 2:09
Hello All.
We obtained a new in box DB408D-B antenna, it is really a pair of DB404, 3.8 db
antennas on a common mast with 2 feeedlines, equal to a DB408 split in half. My
question is,m we want to use it as a single 408 antenna. how do we combine the
2 halves? I was told that they used to make a
One further thing: these are subject to intermittent pins connecting the back
plane to the exciter interconnect board.. I have fixed many of these with
excessive voltage drops on the exciter final 12 volt line pin, and the line
connecting the 12 volts to the tripler.. also check the small plug
The exciter board makes about 500 mw, the tripler makes anywhere from 1.4 to
2.2watts, frequency dependant.
- Original Message -
From: John Everson
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 08, 2007 10:42 PM
Subject: [Repeater-Builder] UHF Micor Exciter Output
I know it is off topic, but does anyone here have experience changing a GP350
UHF from 2 channel to 16? I have one that I want to do, and don't know where
else to ask.
Lance N2HBA
Hello All,
I am seeking to purchase a Motorola R1034A Control Line test Set. it is
basically an ac millivolt meter with a dbm scale for setting telco line levels.
Anybody have one gathering dust???
Lance N2HBA
Yikes!. You mean that spark gap is dead!
Lance N2HBA
- Original Message -
From: Jim B.
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, March 15, 2007 8:59 AM
Subject: Re: [Repeater-Builder] Amateur-Grade Radios (Was: Fixed Audio)
Eric Lemmon wrote:
Nate,
Anyone have any luck using a 450-470 Micor receiver below 440? I am considering
using them as link receivers. Or, anyone use a 403-420 model in 430-440 use?
Lance N2HBA
The radio you have is probably an FSTR250, not 520... the IF is 455 kHz, not
10.7 so the filter crystals made by Comm. Spec will not work. I assume that you
have the Sensicon A receiver, about 5 inches wide with a rather big IF
filter, about 4x4x2. If the last letter on the filter is an S it is
Hello Rod,
To set things straight, the radio is NOT an 13V series as others have
said, it is much newer. The radio you have is called a Research Line,
Sensicon Receiver type radio. The nominal output was 250 watts. The radio
is comprised of the following:
Receiver: is a PA8633, the number you
bandwidth typically 1 mhz, max,
- Original Message -
From: w4wsm
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, February 17, 2007 4:36 PM
Subject: [Repeater-Builder] station master bandwidth?
Hi,
Any idea what kind of bandwidth a full size station master would
Auto part stores carry Aluminum wheel cleaner, it is a strong chemical that
strips off oxidation and leaves a clean , raw, surface. The only problem is
that raw aluminum starts to oxidize immediately. You will need to covert the
antenna with a coating of clear urethane to stop this from
It's a common problem, Moto. fixed it by coming out with the unified chassis
which eliminated the ribbon cable. You might try making up jumper wires to
eliminate the ribbon, you can get edge connectors if you wish, or tear the
ribbon apart for the plugs and start over. It's a pain, but it
Hello,
I have several cans that were on 46.00 mhz, about 5 feet long, mostly DB
products and celwave. They have external notch lines as well. If interested, I
can photograph them for you.
lance N2HBA
- Original Message -
From: dave_g7uzn
To: Repeater-Builder@yahoogroups.com
I am seeking a manual, print, or actual unit.. a TS0089 Speaker and channel
switch assembly for a 800 series repeater/base station.
Help!
Lance, N2HBA
- Original Message -
From: vince
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, November 23, 2006 12:38 PM
Subject:
???if u
like any info on programming this let me know .
Captainlance [EMAIL PROTECTED] wrote:
I am seeking a manual, print, or actual unit.. a TS0089 Speaker and channel
switch assembly for a 800 series repeater/base station.
Help!
Lance, N2HBA
- Original Message
SEEKING ; MOTOROLA DPL CODE PLUGS, TRN6005 CODE 023 , NEED FOUR OF THEM.
MOTOROLA CODED SQUELCH PLUG IN CARDS FOR SPECTRA TAC, TRN6082, FOR DPL
LANCE ALFIERI N2HBA
[EMAIL PROTECTED]
THANKS!
Hello,
I have several of these Micor repeaters with the TPN1105/6 battery charger
supplies running and have the solution to your problem. First, the factory
set the charge voltage at 14.25 volts since as standard equipment they
supplied NICAD batteries for backup. Naturally, this is way to high
Yes, the battery charge units have a big cast aluminum heat sink on the
chassis.
- Original Message -
From: Lee Williams [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, April 18, 2006 5:05 PM
Subject: Re: [Repeater-Builder] back-up battery charging
I will have to
I am looking for information on the Micor station "
battery charger" power supply, TPN1106A. Thisunit has a large cast
aluminum heatsink on the rear side of it, and a TLN5298 stamped on the chassis
as well.This unit provides charging for stand by batteries as well as
powering the station.
Hi,
I have one of these meters too, Think I have a book as well. I'll look
tonight. Lance N2HBA
- Original Message -
From: Mike Perryman [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, March 16, 2006 12:04 PM
Subject: [Repeater-Builder] deviation meter info needed
The backplane needs jumpers 1,4,5 only.. remove all
others. I can email you the complete conversion process that I use, or fax it to
you. Here is a good start on things. I've done about 15 of them so
far with success.if you plan to use a controller, then the only card you will
need is the
The TLE1713 PA takes 1.4 watts input to make 92 watts output, before the
circulator, and about 75 watts after the circulator. The control wire takes
voltage, not a ground to make the amp work. Typically, about 6 volts for
full P.O.
lance N2HBA
- Original Message -
From: John Everson
I've done it, Lance N2HBA... contact me if you wish, I live on Long Island,
NY
516 935 6249 if you wish to call. [EMAIL PROTECTED] email
- Original Message -
From: Bill Wilson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, February 13, 2006 8:45 PM
Subject:
Hi, We have 3 of these online, each channel requires a COR input so that the
voter knows that the channel is active. lance N2HBA
- Original Message -
From: Erik Finskas [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, February 03, 2006 7:48 AM
Subject:
Anyone know what the interchange is for M9995 power
transistors used in Micor uhf PAs like the TLE1713?
Thanks...
lance N2HBA
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to:[EMAIL
I have several 110 watt VHF Mitrek mobiles, complete with accessories, in
exceptionally clean condition. $ 200.00 each, with PL. buy 2, price is
$350.00 lance N2HBA
- Original Message -
From: Alexander N Tubonjic [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday,
Wanted for a 10Meter project, Motorola Micor
exciter circuit board for base station Part # TLB8172 or TLB8272 range is
30-36 Mhz.
Lance, N2HBA
[EMAIL PROTECTED]
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this
HI Mark,
What type of reed do you need, either a # or description, or radio model
will help. I probably have them. Lance.N2HBA
- Original Message -
From: Mark Cobbeldick [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, December 28, 2005 8:41 AM
Subject:
I am looking for several Motorola TLN8381 PL reeds,
136.5 Hz. for a voter project... Please contact me if you have them to sell or
trade.
Lance N2HBA
[EMAIL PROTECTED]
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from
-
From: Neil McKie [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 06, 2005 10:11 PM
Subject: Re: [Repeater-Builder] shipping suggestion
I have the 41 cabinets and the doors ... how many of which do
you want?
Neil - WA6KLA
Captainlance wrote:
Hello.
I am
Hello.
I am looking for Motorola Micor base/repeater cabinet doors, both the 41 and
46 inch ones... anyone have some to sell?
Also looking for 40-50 Micor base power amp, TLB1414, UHF amps TLE1713
Thanks
lance N2HBA
- Original Message -
From: Tony Faiola [EMAIL PROTECTED]
To:
Motorola cabinet doors, 41 and 46 inch tall, fit
Micor era base/repeaters.
TLB1414 40-50 mhz. continuous duty PA for Micor
base
TLE1413 UHF PA's, 450-470 mjhz.
TLB 1412 30-36 mhz Continuous duty PA, Micor
base.
Will pay fair price and shipping.
Lance N2HBA
[EMAIL PROTECTED]
Long Island, New York.
- Original Message -
From: Maire-Radios [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 06, 2005 9:14 PM
Subject: Re: [Repeater-Builder] shipping suggestion
and where are you at?
- Original Message -
From: Captainlance
many of which do
you want?
Neil - WA6KLA
Captainlance wrote:
Hello.
I am looking for Motorola Micor base/repeater cabinet doors, both the 41
and
46 inch ones... anyone have some to sell?
Also looking for 40-50 Micor base power amp, TLB1414, UHF amps TLE1713
Thanks
lance N2HBA
I have the 540S filter, 5kc. the 540W is 15kc... lance N2HBA
- Original Message -
From: us_communications1 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, December 05, 2005 4:03 PM
Subject: [Repeater-Builder] MOTOROLA PARTS SUPPLY
I need a tu-540W for a mototola
yes, all the spectra tac is, is just a Micor receiver in a 19 rack mount
case with audio processing cards. lance N2HBA
- Original Message -
From: Don [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, August 26, 2005 2:56 AM
Subject: [Repeater-Builder] Channel Element
I have a TPL 100 W. UHF repeater amp, exc. condition for trade if you are
interested.it's the type with the large heatsink attached, about 6or so
inches high, .. lance, N2HBA ( NY)
- Original Message -
From: Jeff DePolo WN3A [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent:
I need a manual for a S1338 series Motorola Station
Monitor.. Micor era unit. it's a monitor receiver with a modulation scope, etc.
Used mainly for public safety systems in the 70's and 80's. Any help
out there? original part # was 68-81069A29
Thanks,
Lance N2HBA
1 - 100 of 119 matches
Mail list logo