Ah ha! Now I have it...your job title explains the comment about Part 90.
de WD7F
John in Tucson
- Original Message -
From: Kris Kirby k...@catonic.us
To: terry dalpoas km...@yahoo.com
Cc: Repeater-Builder@yahoogroups.com
Sent: Sunday, May 30, 2010 12:57 PM
Subject: Re: [Repeater
I was able to use my full name in a search and it came up, however, I had a
ship's radar endorsement that's not shown. What good is the GROL anyway?
Does anyone honor it?
de WD7F
John in Tucson
- Original Message -
From: Don Davison
To: Repeater-Builder@yahoogroups.com
Sent
just about bullet proof. One at least two occasions the RC-210 controller
keyed it all night. No problem.
You can read all about it on K7IOU Dave's page
http://home.comcast.net/~micorrepeater/
de WD7F
John in Tucson
- Original Message -
From: Kevin Custer kug...@kuggie.com
Go buy yourself a Kill-A-Watt...less than $30. Has several modes, e.g.,
voltage, frequency, average power, peak power,etc. and works great for the
price.
de WD7F
John in Tucson
- Original Message -
From: Thomas Oliver tsoli...@tir.com
To: Repeater-Builder@yahoogroups.com
Sent: Monday
Why not try to follow the instructions at the bottom of the page?
- Original Message -
From: b
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, August 11, 2009 3:00 PM
Subject: [Repeater-Builder] unsubscribe
- Original Message -
From: Jeff DePolo j...@broadsci.com
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, June 24, 2009 12:20 PM
Subject: RE: [Repeater-Builder] Dual Receive Antennas
You can't get there from here.
Trying to add the yagi to the omni using power division topside
Thanks Skipp...I was thinking there was more info on changing the base
station to a repeater and as Oliver said Sir, I want more !.
de WD7F
John in Tucson
- Original Message -
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, May 21, 2009 11:16 AM
haven't heard of anyone having similar on 2 meters.
Just curious.
de WD7F
John in Tucson
- Original Message -
From: Joe k1ike_m...@snet.net
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, January 28, 2009 7:45 AM
Subject: Re: [Repeater-Builder] 2 meter noise help!
Have you taken
another gin tonic ! What's another few
brain cells anyway ?
de WD7F
John in Tucson
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 16, 2008 9:59 PM
Subject: RE: [Repeater-Builder] Volt-Amp (Re: APC UPS Charging Power
If you want to see how many hoops we jumped through to convert a high-band VHF
Micor to 220 go here: There's a PA link near the top.
http://home.comcast.net/~micorrepeater/
de WD7F
John in Tucson
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED] ; Repeater
bullet proof
in that respect.
de WD7F
John in Tucson
- Original Message -
From: WD7F - John in Tucson
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 03, 2008 8:46 AM
Subject: Re: [building-repeaters] Re: [Repeater-Builder] Re: Micor to 222 MHz
PA Conversion
If you
A-10s and EC-130s here and many other agencies that probably are
using this stuff in the 430 - 450 MHz range.
I get the feeling that I've opened a can of worms.
de WD7F
John in Tucson
it's 24/7 and getting stronger.
And, I miss-spoke, it's 420 - 450 as you said.
At least you give me a little hope with your comments and if I can find that
friendly someone and buy him (her) a beer, I might do some good.
de WD7F
John in Tucson
- Original Message -
From: skipp025 [EMAIL
FYIwaste Waist is what I no longer have ! I'm just round !
- Original Message -
From: Ron Wright [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, June 19, 2008 9:10 AM
Subject: Re: Re: [Repeater-Builder] Re: software repeater controller
This was what I was
Here's my design for a power amp used on a Micor high band VHF converstion.
Not for the faint of heart.
http://home.comcast.net/~micorrepeater/ Check out the PA link at the top.
de WD7F
John in Tucson
- Original Message -
From: Robin Midgett [EMAIL PROTECTED]
To: Repeater-Builder
Yeah, I misread the post and my brain looked at 110 and recorded 210. The
110 is an old controller. So, it was
Duh!, I'm an idiot! It has something to do with being 67, I'm sure.
de WD7F
John in Tucson
- Original Message -
From: MCH [EMAIL PROTECTED]
To: Repeater-Builder
Ken Arck - AH6LE
de WD7F
John in Tucson
- Original Message -
From: Jim Brown
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 25, 2008 8:36 AM
Subject: Re: [Repeater-Builder] RC110 Group
I tried to join several times a couple of years ago, and was refused by the
moderator
been dead for sometime. Anyway I cancelled the
request.
On 1/25/08, WD7F - John in Tucson [EMAIL PROTECTED] wrote:
Ken Arck - AH6LE
de WD7F
John in Tucson
- Original Message -
From: Jim Brown
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 25, 2008 8:36 AM
Duh !
- Original Message -
From: MCH [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 25, 2008 3:13 PM
Subject: Re: [Repeater-Builder] RC110 Group
The 210 group is different than the 110 group.
Joe M.
WD7F - John in Tucson wrote:
Really? I get mail
a wonder I
ain't dead from that.), evaporates much more slowly. Just wear some
painters gloves when you use it.
One a side note, Oops is a pretty good product for removing stains. Have
you tried that?
de WD7F
John in Tucson
- Original Message -
From: Bob M. [EMAIL PROTECTED]
To: Repeater
1.2 divided by 0.8 = 1.5
Well, I'll be darned !!!
de WD7F
John in Tucson
- Original Message -
From: Gary Schafer
To: Repeater-Builder@yahoogroups.com ; [EMAIL PROTECTED]
Sent: Sunday, November 04, 2007 8:52 PM
Subject: RE: [Repeater-Builder] VSWR Chart for Bird
1 + square
One more commentlet's see if I can make it without getting egg on my
face...
The older receivers such as my Collins 74A4 called for a 100uv (that's
microvolts) input to get S9 and my Kenwood 820 said 50uv for the same...so
that should give you an idea how important it is to give a 59
the alignment
of the exciter/deviation as per the manual on the 2000 so that you have the
proper compression of the audio and the deviation limited to ~5K, etc.? If
you don't have a manual that is a problem.
de WD7F
John in Tucson
- Original Message -
From: atms169 [EMAIL PROTECTED
I had a hairline crack where the R1 card plugs into the motherboard that
caused the exact problem with my MSR2000. Get a magnifying glass and a good
set of eyes and take a look around those pins on the backside of the MB.
de WD7F
John in Tucson
- Original Message -
From: [EMAIL
! And I got some ocean front property here in
western Arizona
de WD7F
John in Tucson
So my take is that there are critical cable lengths involved for adding a pure
pass cavity to a BP BR duplexer, but I would be interested to hear from anyone
aboard who has the necessary hardware kicking
purchased. So, we went with them anyway.
Almost two years later... go figure.
de WD7F
John in Tucson
- Original Message -
From: Nate Duehr [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 14, 2007 6:41 PM
Subject: Re: [Repeater-Builder] Re: 224 MHz PA fun and war
it on K7IOU's micor conversion page at
http://home.comcast.net/~micorrepeater/220mhzpa.htm
de WD7F
John in Tucson
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* Your email settings:
Individual Email | Traditional
* To change
It's a pilot's term, I think. Missed the target, no target found, missed the
interception point, etc.
de WD7F
John in Tucson
- Original Message -
From: George Henry
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, July 08, 2007 8:10 PM
Subject: Re: [Repeater-Builder] Re: Acronyms
did you go about simultaneous PL/DPL?
de WD7F
John in Tucson
- Original Message -
From: mch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, July 02, 2007 9:17 AM
Subject: Re: [Repeater-Builder] ctcss and dcs at same time?
I've done it successfully.
Joe M
- Original Message -
From: kk2ed [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 22, 2007 8:53 PM
Subject: [Repeater-Builder] Re: Need VHF MSR2000 Repeater help
I have a bunch of MSR2000s here. I know the Canadian version was
offered as a 132-150 version,
Yes...
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 28, 2007 8:37 PM
Subject: [Repeater-Builder] Multiple Emails
Anyone else getting multiple copies of the same email on any or all of
their subscribed Yahoo Groups?
I'm seeing
were then able to get it on frequency with the external adjustment. I might
have been a tuning slug...I've slept too many times since then so I don't
remember. However, I do remember opening the element and tweaking it.
de WD7F
John in Tucson
- Original Message -
From: Robin Midgett
-
1K PL deviation and left it there, setting the maximum deviation via the
controller. I considered figuring a way to modify the PL card or the
exciter so that the level could be adjusted independently of IDC. That
puppy was a real learning experience for us novices.
de WD7F
John in Tucson
Why yes, John, I believe there is.
- Original Message -
From: WD7F - John in Tucson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, March 15, 2007 7:08 AM
Subject: Re: [Repeater-Builder] ICM Crystals Off Frequency?
Doesn't the MSR-2000 use the crystal element
it on the mountain soon.
de WD7F
John in Tucson
- Original Message -
From: WD7F - John in Tucson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, March 06, 2007 6:04 PM
Subject: [Repeater-Builder] Another TKR-820 Question
The line-out de-emphasized audio on pin 10 of the accessory
!
Sorry - I just couldn't resist. sheepish grin
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of WD7F - John in Tucson
snip
If it's good to go by the critics, we'll put it on the mountain soon.
de WD7F
John in Tucson
Yahoo! Groups Links
Panel could via Q6 and
R45, but it doesn't appear to be the case in real life.
Anybody know. I'd be happy to take it off line or call you on the phone (my
nickel).
de WD7F
John in Tucson
Where? The link in the first message of the thread takes you to an FTP player
site. Is there a link on that page that I don't see?
de WD7F
John in Tucson
- Original Message -
From: Mike Perryman
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 01, 2007 3:01 PM
Thanks.
de WD7F
- Original Message -
From: Christopher Zeman
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 01, 2007 3:18 PM
Subject: Re: [Repeater-Builder] FCC Test/Tower fall
http://www.youtube.com/watch?v=QSseoyHouOM
I think he WAS going to climb back
- Original Message -
From: Mike Perryman K5JMP
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 01, 2007 4:31 PM
Subject: RE: [Repeater-Builder] FCC Test/Tower fall
Sorry, was headed out the office door... just arrived home and see the link
has already been
DuhI'll never know why I hit the send button after I read this
messagesorry.
de WD7F
- Original Message -
From: Mike Perryman K5JMP
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 01, 2007 4:31 PM
Subject: RE: [Repeater-Builder] FCC Test/Tower fall
Don,
I have pdfs I made from the very small schematic of the 13-509 and one of
the Comspec ME-3 encoder/decoder that shows where to connect audio
in/out/etc. if you're interested. Reply direct.
de WD7F
John in Tucson
- Original Message -
From: Don [EMAIL PROTECTED]
To: Repeater
Hook that signal to the base of the transistor through a 10K or so resistor.
That should provide enough isolation to prevent loading of the signal. I
hope it's going positive when the squelch is open so your COS will be low
when active.
de WD7F
John in Tucson
- Original Message -
From
I used one of those one time to get enought audio drive to modulate an old
Molorola repeater via the line transformer. I used it for a while on IRLP,
had some hum but it wasn't too bad. I've heard worse. :-)
de WD7F
John in Tucson
- Original Message -
From: DCFluX [EMAIL PROTECTED
Curious as to what is different in the crystal when it is cut for low side
vs high side.
de WD7F
John in Tucson
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Cc: [EMAIL PROTECTED]
Sent: Monday, January 01, 2007 10:55 AM
Subject: [Repeater
frequency.
Chuck
WB2EDV
- Original Message -
From: WD7F - John in Tucson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, January 01, 2007 1:12 PM
Subject: Re: [Repeater-Builder] RE: Bomar Crystals Ordered, all the RX not
working for GE EXEC II mobiles
Curious
Can anyone tell me a source for parts for the TKR-720/820 repeater. Is
Kenwood the only source? I have a Signaling Unit that crapped out.
Somebody on the board is dragging down the 5V regulated and it's not easy
for this old guy to see that tiny stuff, let alone solder it.
de WD7F
John
electronics fun?
Anyway, I STILL wonder if it's possible to find circuit boards for the
TKR720/820.
de WD7F
John in Tucson
- Original Message -
From: WD7F - John in Tucson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 26, 2006 12:46 PM
Subject: [Repeater-Builder
Thank you..$178.14 or $188.27 for the signaling unit. Better than
buying another repeater. I have the URLs bookmarked.
de WD7F
John in Tucson
- Original Message -
From: Jeff Hunt / ICS Radio [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 26, 2006 4
I have the manual...it says KPT-2R Instruction Manual...not easy to
understand.
- Original Message -
From: kb8sxk [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, November 16, 2006 8:38 AM
Subject: [Repeater-Builder] Re: Kenwood KPT-20 ROM Unit
I have the manual
cut, it has some typographical errors.
On 11/15/06, WD7F - John in Tucson [EMAIL PROTECTED] wrote:
Does anyone here have a good understanding of this unit and possibly help
step me through a signal change on the 9346 EPROM?
I'd be happy to phone or e-mail direct.
de WD7F
John in Tucson
help would be appreciated.
de WD7F
John in Tucson
- Original Message -
From: N9WYS [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, October 25, 2006 5:32 PM
Subject: RE: [Repeater-Builder] TKR-820 PL Control
John,
Do you have the manual for this repeater
either CDCSS with the 134
Hz turnoff tone or CTCSS with reverse burst capability.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of WD7F - John in Tucson
Sent: Saturday, October 28, 2006 7:25 AM
To: Repeater-Builder
experiement is not so succssful.
Thanks.
WD7F
John in Tucson
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* Your email settings:
Individual Email | Traditional
* To change settings online go to:
http
Thanks Juan. If I understand you correctly, it should work as I speculate.
John in Tucson
- Original Message -
From: Juan Tellez [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, October 25, 2006 1:43 PM
Subject: RE: [Repeater-Builder] Re: TKR-820 PL Control
The
Yes, I have the PDF manual. Thanks anyway.
de WD7F
John in Tucson
- Original Message -
From: N9WYS [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, October 25, 2006 5:32 PM
Subject: RE: [Repeater-Builder] TKR-820 PL Control
John,
Do you have the manual
Yeah...I may use a relay. The TX PL EN wasn't the thing I needed. However,
the green wire was it. (Thanks Juan) I figure it's not a big deal to
short it out because it's the wiper of a 47K pot, not the direct output of
an amp. I tried it this evening and it works. The signal level was about
Anyone know offhand if it's possible to control the PL during non-COS
transmissions with the TX PLL EN on the TX PLL Unit of the Kenwood TKR-820?
Or, does anyone know a tried true method to perform this task?
Thanks,
John in Tucson
Yahoo! Groups Links
* To visit your group
ust wanted to see if 12 volts or 5 volts was there or was the
signal zero, etc. I'll bet I can tell if your car battery is dead or if
it'scharging. And it's good for continuity and gets you in the
ballpark for resistance. What do you expect for $2.99?
de WD7F
John in Tucson
- Origin
baud audio
out and the 9600 baud audio out?
de WD7F
John in Tucson
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 17, 2005 9:57 AM
Subject: Re: [Repeater-Builder] Re: DR-235 for repeater
I also had the same concerns.
However, I
Thanks...good info.
John
- Original Message -
From: Ken Arck [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 17, 2005 10:26 AM
Subject: Re: [Repeater-Builder] Re: DR-235 for repeater
At 10:21 AM 12/17/2005 -0700, you wrote:
Which output are you talking
I can see how it might be constured as heatshrink. That's like the guy in
the TV commercial and French benefits...You mean we don't get French
benefits? ;-)
- Original Message -
From: Jim B. [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 13, 2005 9:30
that
a few miles. However, isn't the PA keyed and unkeyed?
de WD7F
John in Tucson
- Original Message -
From: n9lv [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, August 19, 2005 8:52 AM
Subject: [Repeater-Builder] TLD5322 Exciter is on all the time, is there
another way
Thanks Mark, we have received the schematic from Larry, WA4FOB. Note, I did
say that we WERE looking for the schematic. Guess I should have been
clearer.
de WD7F
John in Tucson
- Original Message -
From: N9WYS [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June
that clarifies what we were looking for and why.
de WD7F
John in Tucson
- Original Message -
From: Jim B. [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June 20, 2005 9:20 AM
Subject: Re: [Repeater-Builder] Micor mobile manual/schematic sought
Budd Turner wrote:
From
Power gain = 10log P-Out/P-In
- Original Message -
From: Ken Arck [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June 06, 2005 9:42 AM
Subject: Re: [Repeater-Builder] formula for DB -Power
At 11:22 AM 6/6/2005 -0500, you wrote:
well for some reason i just can not
You guys are all purists. Hook it up and see
if it works.
de WD7F
John in Tucson
- Original Message -
From:
Chuck Kelsey
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, December 12, 2004 4:47
PM
Subject: Re: [Repeater-Builder] 600 - 10k
ohm Interface
voltage
divider increasing it's resistance and causing the voltage to drop to about
8V max. Good luck. I've got one that took a power surge last spring during
a lightning storm and I haven't found the problem yet. I just bought
another one.
de WD7F
John in Tucson
- Original Message -
From
all
six.
de WD7F
John in Tucson
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, August 17, 2004 6:08 PM
Subject: Re: [Repeater-Builder] Patch lead lengh between cavities ?
Dave,
There is no pat answer to your question, because
, John. Then it found it. Interesting that when is
searched by call I found a WD7FM, a radio control club in Riverside, CA.
Neat.
de WD7F
John in Tucson
- Original Message -
From:
Paul Finch
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, August 11, 2004 7:19
: [Repeater-Builder] Question
for the group
John,
Saw your pic and the article on you in Sept's
QST. Congrats OM! ;)
Kevin
K2KMB in Sparta NJ
(I've talked to you on Echolink on my machine, and on
Earl's once or twice.) ;)
From: WD7F - John in Tucson
[mailto
Do you suppose it's the same board as in the TRN1192A? Probably not. The
TRN5120A has a pulse tone output when the power supply is on backup power.
Anyway, if it is a 5120 or equivalent, I can e-mail you the schematic.
de WD7F
John in Tucson
- Original Message -
From: Kevin Berlen
r should I throw away the VA3TO
interface? Skipp, I have read your alignment procedure a hundred times,
and it makes sense on paper, but I'm not confident that I'm doing it
right.
I would think that the deviation limiting would not
have an effect on the linearity, but it seems that it does.
de
was instrumental in getting the Channel 11 engineer to tweak his
transmiter and it is all better now.
Thanks for the response.
de WD7F
John in Tucson
- Original Message -
From: skipp025 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 27, 2004 10:35 AM
Subject: [Repeater
74 matches
Mail list logo
