: RE: [Repeater-Builder] Scotchkoat
On Mon, 7 Jan 2008, Paul Finch wrote:
Unless it has something like lacquer thinner in it there is not a
chance of it working. On upholstery I don’t know. It depends on what
it is, if it’s plastic based I would be very careful. If it’s a cloth
material I
brown spider webs.
Paul
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Daron J. Wilson
Sent: Monday, January 07, 2008 9:40 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Scotchkoat
Any one know of any solvents that can
)
Paul
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf
Of Kris Kirby
Sent: Tuesday, January 08, 2008 1:13 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Scotchkoat
On Mon, 7 Jan 2008, Paul Finch wrote:
Unless
-Builder@yahoogroups.com
Sent: Tuesday, January 08, 2008 7:58 AM
Subject: RE: [Repeater-Builder] Scotchkoat
It's probably a lot harder to get M-E-K now than it
was when we all grew up. Also, in that era before
everything was found to cause cancer only in
California, who cared about putting
[mailto:[EMAIL PROTECTED] On Behalf Of Jim Brown
Sent: Tuesday, January 08, 2008 11:40 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Scotchkoat
Take it seriously when they say something has been
proved to cause cancer. I have a buddy who lost his
leg to cancer and they traced
-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf
Of Kris Kirby
Sent: Tuesday, January 08, 2008 1:13 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Scotchkoat
On Mon, 7 Jan 2008, Paul Finch wrote:
Unless it has something like lacquer thinner
@yahoogroups.com
Subject: RE: [Repeater-Builder] Scotchkoat
Take it seriously when they say something has been
proved to cause cancer. I have a buddy who lost his
leg to cancer and they traced it back to a solvent he
used as a jet engine mechanic in the Air Force. He
managed to live through it, but minus
Paul Finch wrote:
Jim,
One thing, same thing about Radon gas. What happened to that, it was
supposed to kill thousands. Someone made a killing off the test kits.
Again duped by the news media.
Not really -- much of the old construction housing built before anyone
tested for radon
Use Scotchkoat from 3M to seal the antennas but don’t get it on you, it sticks
to you as well as it does the antennas.
Any one know of any solvents that can be used to remove it?? I have some on
some tools and a spot on my car upholstery (I know, I know)
Scott
Scott Zimmerman
Seems like I remember acetone works. Try it on something unimportant first.
Chuck
WB2EDV
--- Original Message ---
From: Scott Zimmerman[mailto:[EMAIL PROTECTED]
Sent: 1/7/2008 12:05:05 PM
To : Repeater-Builder@yahoogroups.com
Cc :
Subject : RE: Re: [Repeater-Builder
Try some citrus based solvent.
Scott Zimmerman [EMAIL PROTECTED] wrote:
Use Scotchkoat from 3M to seal the antennas but dont get it on you, it
sticks to you as well as it does the antennas.
Any one know of any solvents that can be used to remove it?? I
Hello Scott:
I have used Scotchkoat a few weeks ago on my 10 meter yagi. To get the
stuff offanything else, I use Goof Off, the ultimate remover! I think it
was purchased at home depot or Lowe's. It may take the skin off your hands!
Tony, K3WX
Scott Zimmerman wrote:
Use Scotchkoat from 3M
Actually, Goof Off is rather safe on hands, probably
more so than acetone. It's like high-strength lighter
fluid. Between that, alcohol, and acetone, something
will make a dent in Scotchkoat.
Yes, Home Depot sells it in various sizes, and it
looks just like an old lighter fluid can. It also does
I just pulled the MSDS for ScotchKote (note the
official 3M spelling of the product).
It contains acetone, toluene, and M-E-K, among other
nasty chemicals. So at least some of those should help
soften it and remove it from unwanted surfaces.
Goof Off contains primarily xylene.
Bob M.
==
---
Any of the usual shop thinner will remove it from metal tools , as for the car
I suggest a spot test first or you might do some real damage.. next time drop
sheet :)
To: Repeater-Builder@yahoogroups.com
From: [EMAIL PROTECTED]
Date: Mon, 7 Jan 2008 12:05:05 -0500
Subject: Re: [Repeater
: RE: Re: [Repeater-Builder] Scotchkoat
Use Scotchkoat from 3M to seal the antennas but don’t get it on you, it
sticks to you as well as
it does the antennas.
Any one know of any solvents that can be used to remove it?? I have some on
some tools and a spot
on my car upholstery (I know, I
. Needless to
say, try it on a hidden piece if upholstery first.
Paul
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Guello
Sent: Monday, January 07, 2008 1:22 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Scotchkoat
Try
Any one know of any solvents that can be used to remove it?? I have some on
some tools and a spot on my car upholstery (I know, I know)
I have little spots of that wonderful product on many things, the tops of my
tower boots, a few tools, etc. One Klein canvas tower bag had bottle of it
On Mon, 7 Jan 2008, Paul Finch wrote:
Unless it has something like lacquer thinner in it there is not a
chance of it working. On upholstery I don?t know. It depends on what
it is, if it?s plastic based I would be very careful. If it?s a cloth
material I would try the lacquer thinner then
19 matches
Mail list logo