I had the same sorta set un till I got a harris Radio Phone 60 watts cont.
duty right out of the box and thay tune to the ham bang nicely
When I ran the Micros I had both worked for RX and TX so if my RX died I
could flip the radios and be back on the air
thats an idea if it was set up that way
Question for the group
The repeater is on the out side of town .. coverage in town is ok but could
be a lot better TX is GREAT
Idea .. can I put a RX (vhf ) site in town and piggy back that to a UHF
radio and then feed that into a RLC controller to be linked to the main
repeater port
or will
Question for the group
The repeater is on the out side of town .. coverage in town is ok but could
be a lot better TX is GREAT
Idea .. can I put a RX (vhf ) site in town and piggy back that to a UHF
radio and then feed that into a RLC controller to be linked to the main
repeater port
or will
then to get into situations like this!
Mike
WM4B
From: Repeater-Builder@yahoogroups.comRepeater-Builder%40yahoogroups.com
[mailto:Repeater-Builder@yahoogroups.comRepeater-Builder%40yahoogroups.com]
On Behalf Of Rick Szajkowski
Sent: Saturday, February 21, 2009 2:24 PM
To: Repeater-Builder
its not a voted system ..
the repeater is a Harris Radio Phone repeater
and I was looking at a Ge Phoenix VHF to UHF to the repeater site UHF
phoenix to the controller
again just to help cover the HT's in town .. ( small town )
Was thinking just a simple J pole for the VHF side does not need a
Should you be local or close to me I also have 3 6' GE cabinets that I
would
like to have go bye bye from my storage unit!
.
would love ge cabinets but alass to far away
if any one has any in and around the toronto area :)
its about time the new 'ham' radios support encode and decode CTCSS (pl)
I hate to have to buy and extra board to support encode
I would like to run our repeater in PL mode but a lot of our users have
older radios with out encode
the fun debate about CTCSS and CDCSS
Thanks to the group for a
Thanks Skipp needed a chuckle !
On Sat, Mar 7, 2009 at 11:39 AM, skipp025 skipp...@yahoo.com wrote:
Re: Today's funny two-way radio story (March 09).
The Siren - PA Speaker War
Today's very funny story was told to me by a friend after my
seeing the evidence in a shop.
A service call to
RIP and our thought and prayers go out to the family
On Mon, Mar 9, 2009 at 6:42 PM, Don ka9...@wowway.com wrote:
FYI
One of the original Voices of WWV Passed away
Our Thoughts and prayers go out to the Family
73 De Don KA9QJG
The recorded voice of Time and Frequency Station WWV has
I also have a TE amp . and very happy with it
On Fri, Mar 13, 2009 at 1:11 PM, James Delancy ctra...@gmail.com wrote:
TE Systems in California is where I got my 220 amp.
James WJ1D
Michael Ryan wrote:
Does anyone have some advice about what to use for a power amp in a 220
Hello to the group ... I need to run some new 7/8 hard line and some 1/2
inch
Question is there any info on installing the ends on both I did a google
search and not luck
any help would be great and also any special tools ?
Thanks in advance ..
Rick
be all set when you get them. No special tools required.
Chuck
WB2EDV
- Original Message -
*From:* Rick Szajkowski va3r...@gmail.com
*To:* Repeater-Builder@yahoogroups.com
*Sent:* Monday, March 16, 2009 3:11 PM
*Subject:* [Repeater-Builder] Andrews hard line help
Hello to the group
16, 2009 at 3:14 PM, Chuck Kelsey wb2...@roadrunner.com
wrote:
There is an instruction sheet that comes with the new connectors, so you
should be all set when you get them. No special tools required.
Chuck
WB2EDV
- Original Message -
*From:* Rick Szajkowski va3r
one of the connectors is a Andrews L45W thats a N Mail connector .. for the
7/8 Andrews hard line .. ( I cant get to the roll of 7/8 right now)
I hope to get to the other connectors tomarrow as I need a female for the
sinclare 4 bay ..
Thanks to all for the help .. Getting ready to do Tower
from memory
1 good boat fiber glass cleaner ( where gloves !! the glass splinters HURT
!)
2 a good gel coat ( type of paint sotra again boat supply store)
Make sure there is no metal in the paint ( or Gel Coat )
3 after the gel coat a good sealer to the gel coat I dont think I would say
1
cant answer to the info on your duplexer, you have not given any info on the
make model
you need to tune your duplexer to the pair you are useing ..
2 you should have a 1.1 match from the duplxer and the radio ( if the
duplexer is tuned right)
and a 1.1 match from the duplexer to the ant if
what I would do ...
unplug the RIC .. and turn 1 radio off .. and power up .. if all is good
turn the system off and turn the other radio on and power up .. if still
good then power down plug the RIC in then power up the system up again ..
This will tell you A if there is a Problem with the RIC
I dont know about this duplexer but I would look to see if it does a 600kc
split ..
if its set up for a 2meg split at 86 dB .. then I would think you would get
a lot less
even if you could get it down that low ..
On Wed, Apr 8, 2009 at 6:13 PM, Joe k1ike_m...@snet.net wrote:
I just
how many do you need ?
On Fri, Apr 10, 2009 at 2:52 AM, jgielis jgie...@westnet.com.au wrote:
Hi Guys,
I've been reading up on
How to Modify a Sinclair Q2220E 132-174 MHz Duplexer to 220 MHz
as Dave C has done.
Where/who supplies these connectors..
73 John
VK4JKL IRLP 6163
All the computer I used I do a dual boot .. Dos Windows and Linux it is
really simple to do ..
Rick
On Fri, Apr 10, 2009 at 7:48 PM, Henry Wingate k4...@charter.net wrote:
I was making a similar flash drive based DOS to be able to use the DOS
CT logging program on Field Day using modern
So thats what I am doing wrong .. LOL ...
On Sun, Apr 12, 2009 at 12:55 PM, Bob Underwood b...@rahul.net wrote:
I waited to post this until the auction had ended, but now decided to
send it so we can all learn:
I would think so as here in Canada we have the some thing in my area its
162.2
Rick
On Thu, Apr 16, 2009 at 3:38 PM, Geert Jan de Groot pe1...@xs4all.nlwrote:
In the UK, Belgium and the Netherlands, CTCSS tones are assigned per
geographical area. For example, in the South of the
Hello to the group ..
Has any one used a Max Trac for link radios
It only has the 8 pin ( I believe ) connector 1 row of pins
I see some one on the Raduis has brought COS out to the front mic Jack but
there is no docs on what was there
I just need to do a temp link from 1 repeater system to
Szajkowski va3r...@gmail.com* wrote:
From: Rick Szajkowski va3r...@gmail.com
Subject: [Repeater-Builder] Moto Max Trac 300
To: Repeater-Builder@yahoogroups.com
Date: Monday, April 20, 2009, 1:10 PM
Hello to the group ..
Has any one used a Max Trac for link radios
It only has the 8 pin ( I
I use a RLC 2a , RLC 3 and a RC 210 all good controllers and all will do
what you want ..
if its just for the repeater and a IRLP/Echo link node all you need is a 3
port controller and I would say go with the Arcom RC210
Rick
On Wed, Apr 22, 2009 at 5:42 AM, w4sjv st...@w4sjv.com wrote:
I
can you read google this morning ?
Nice to see a 'ham' feel to it :)
Rick
Canada wakes up ??
Thanks to Funny
The Guys At Sinclair are GREAT
Also Try Bob Morton
http://mapleleafcom.com/
*Telephone: (705) 435-2819
Fax: (705) 435-2996
E-mail: **i...@mapleleafcom.com* i...@mapleleafcom.com* *
Let him know Rick - VA3RZS sent you
Rick
He is an X sinclare guy and
I dont know the repeater
But cant you just use a controller for this ??
a 2 port controller will do what you want and will allow you to disconect A
repeater from B Repeater is A or B has a problem
Rick
va3rzs
On Fri, Jun 12, 2009 at 9:07 AM, Gareth Bennett (Ihug) gare...@es.co.nzwrote:
I tried your link but could not get the web site got an error 404
I was looknig to do the same thing
Rick
va3rzs
On Wed, Jun 17, 2009 at 9:14 AM, ldgelectronics ldgya...@ldgelectronics.com
wrote:
Laryn,
Here is what we use in our area. It works very well.
This is the error I get form the Big E and fire fox
The website declined to show this webpage
HTTP 403
Most likely causes:
This website requires you to log in.
can you give me some info on the device I ould love to get the digi
up at the repeater site ( sinclair 210 c4)
and the best
A Pa or a better ant. at the remote station ...
On Wed, Jun 24, 2009 at 3:42 PM, Chuck Kelseywb2...@roadrunner.com wrote:
The cheapest, most effective way is to add a PA to the single user having
trouble.
Chuck
- Original Message -
From: Scott na...@yahoo.com
To:
same here .. I guess he's not in a rush to sell
On Thu, Jul 9, 2009 at 1:08 PM, Corey Dean N3FEn...@myqrz.com wrote:
I tried sending him a direct reply and haven't got an answer for days...
Corey N3FE
On Wed, 8 Jul 2009, Fred Esteves wrote:
Do you have prices
--- On Tue, 7/7/09,
if you go with 2 ant you will have a lot of coax to lug around !!
if you could go to UHF the duplexer are smaller even 220 mhz !
unless you have a non Ham freq than you could run a mobile duplexer on
VHF and have 2 of them and swap jumper cables in the box
Good luck !
Rick
On Tue, Aug 4,
Google Bob Morton .. he is an x Sinclair man .. he knows his stuff ..
he might have the info on paper ,,. if not it might still be in his
head .. as a lot of duplexers where his designs
Rick
On Mon, Aug 10, 2009 at 5:46 PM, cruizzer77atlant...@gmx.ch wrote:
That's what I did first but they
hi Gervais I have such a item .. its an alinco controller it was
ment to have 2 HTs on it .. or even one and then act as a 'parrot'
repeater
if you would like more info email me off list
On Wed, Aug 19, 2009 at 5:19 PM, gervaisve2...@hotmail.com wrote:
Hi all
i am looking a COR board that
I like the RLC 's
if you want to support a ham .. and a DARN good controller . Arcom
210 I have very good luck with my 210 and Ken is a verry stand up
kind of guy !
there is a Arcom 210 Yahoo User group !
Rick
On Mon, Aug 24, 2009 at 10:27 PM, va3eamva3...@sympatico.ca wrote:
Our club
he is out of town right now .. if you go to the rc210 yahoo group
maybe some one there could help you out
Rick
On Tue, Sep 8, 2009 at 10:27 AM, wb7btswb7...@yahoo.com wrote:
Anybody heard from Ken AH6LE? I've sent him 2 e-mails in the last 2 weeks
(ar...@arcomcontrollers.com and
dont kow why you say that I have had great service from Ken .. sent my
controller back to him .. he checked it out updated all firmware and
sent it back .. it seems it was a cable I made that went bad .. he
made a cable and it works 100% for me now .
I would buy another with out thinking about it
I run a RLC2a ( older unit) RLC3 Arcom 210 I custom DOS based repeater and I
have an Scom here some where also
I like the RLC2a and my 2nd choice would be the 210 ..
On Wed, Sep 16, 2009 at 8:22 PM, n...@no6b.com wrote:
At 9/16/2009 06:12, you wrote:
ve6sar wrote:
I'm working on a
Good luck with the sale .. I have passed to some friends ..
Will you ship to Canada ?
Thanks
On Fri, Sep 18, 2009 at 8:58 AM, Chris Curtis demo...@rollanet.org wrote:
Pardon my OT intrusion once again.
I'm letting go my IFR-1200s with factory manuals
Ebay auction #
180409235224
RLC3 FS
comes with
5 radio cards (302.50 X 5 = 1512.50)
1 I/O
1 phone patch (165)
asking price $1300 USD + shipping
Project fell through so we are sticking with what we have now
so you are getting the whole controller for less then the radio cards and
phone patch
Thanks for looking
Rick VA3
Would Wayne WA5LUY please send me a note .. the Email address you have
given me keeps bouncing back
Thank you
On Fri, Oct 23, 2009 at 9:28 AM, Rick Szajkowski va3r...@gmail.com wrote:
RLC3 FS
comes with
5 radio cards (302.50 X 5 = 1512.50)
1 I/O
1 phone patch (165)
asking price $1300
dipexer
just like if you had 2 radios in you car
dual band radios have then built in
On Tue, Nov 3, 2009 at 9:11 AM, asterios sv2...@yahoo.com wrote:
it is possible and if it is how can i use one dual band antenna vhf/uhf
with two aprs digipeaters at the same time??? first aprs digipeater
I ran fido and others
google u.s.s alliance bs brampton
1st started on the old apple ][ + then ibm then telent
umm good ol days
On Thu, Nov 12, 2009 at 5:04 PM, Chris Curtis demo...@rollanet.org wrote:
TriBBS was my choice for my BBS.
The Inner Sanctum
I even left it up via telnet for
I run a Harris Radio Phone ( converted to repeater) and it runs 60w all day
and all nite long
Join the Harris yahoo ground and send a note to Roger he does them um in
UHF and VHF when you order from him the radio is on you freq. and all tuned
up ready to go ... and every thing you need is
Of *Rick Szajkowski
*Sent:* Tuesday, November 17, 2009 7:10 AM
*To:* Repeater-Builder@yahoogroups.com
*Subject:* Re: [Repeater-Builder] 50 Watt Repeater
I run a Harris Radio Phone ( converted to repeater) and it runs 60w all day
and all nite long
Join the Harris yahoo ground and send a note
hay skipp you have helped me so much .. :)
email me the model and I will fire you off some code
rick
On Tue, Dec 15, 2009 at 6:21 PM, skipp025 skipp...@yahoo.com wrote:
re: Older RLC Controller Programming Question.
A local ham club has a 2 meter repeater on port
1 and a uhf link radio
Of Rick Szajkowski
Sent: Tuesday, December 15, 2009 4:08 PM
To: Repeater-Builder@yahoogroups.comRepeater-Builder%40yahoogroups.com
Subject: Re: [Repeater-Builder] Older RLC Controller Programming
Question.
hay skipp you have helped me so much .. :)
email me the model and I
--
*From:* Repeater-Builder@yahoogroups.com [mailto:
repeater-buil...@yahoogroups.com] *On Behalf Of *Rick Szajkowski
*Sent:* Wednesday, December 16, 2009 1:07 PM
*To:* Repeater-Builder@yahoogroups.com
*Subject:* Re: [Repeater-Builder] Re: Older RLC Controller Programming
Question.
I
Talk to your phone Co .. let them know what you need it for .. for 911 if
you use the repeater for ARES .. let them know ..
I have heard of the phone co doing a DEEP discount on the service or a
freebe ( as it looks good on there books)
cant hurt to try ... you will have to talk to the VP of
IRLP.net
Talk to Dave C.
Dave has some systems like you are thinking of doing . its a private IRLP
system
what I hear it works very well
Rick
On Mon, Jan 4, 2010 at 4:15 PM, Chris Robinson kf6...@gmail.com wrote:
check out the IP-223. it may fit your needs.
Quick Question
Does any one have some spares that will do 147.300
I have number of PMR 2000 I would trade for some voice pagers that we could
use
even some UHF pagers that can be programmed (put) into the ham band
Thanks !
( I would like to give to our fellow hams
( 2 right now in the house
more info on the repeater and how much .. need to replace current repeater
Thanks
va3zj
On Fri, Jan 15, 2010 at 9:34 PM, jerry ve3...@primus.ca wrote:
Now surplus, a working Ham repeater, extra p.a.'s, documentation, will
sell boards individually., if no interest in the repeater as one
I did have good luck with the amps .. I have 4 running at one time .. but
have moved on to another project and thay are stitting there in a rack .. (
the rack thay where ment to sit in)
Skip has had some luck with them also
On Wed, Mar 3, 2010 at 2:34 AM, KD8BIW sdenn...@yahoo.com wrote:
It's because terrorists are Canadian.
--
Kris Kirby, KE4AHR
Disinformation Analyst
Now thats just not funny
__,_._,__
I would think it would cost more to ship then its worth for me :( I am in
Canada .. and looking
On Mon, Jun 28, 2010 at 4:39 PM, ac6vj ac...@cds1.net wrote:
The cabinets come with the card cages, but alas, no cards.
I wish they did come complete so I would have one to play with myself.
I have RLC's and RC-210's both are very good controllers .. the Arcom RC-210
is very will supported and if you want a good controller I would go that
route .. not to say the RLC's are not good I went back to my 2A and love it
.. the RLC does the 220 repeater
Rick
On Fri, Jul 16, 2010 at 1:25 PM,
://www.arcomcontrollers.com/
Doug
On 16/07/2010 5:30 PM, Rick Szajkowski wrote:
I have RLC's and RC-210's both are very good controllers .. the Arcom
RC-210 is very will supported and if you want a good controller I would go
that route .. not to say the RLC's are not good I went back to my 2A
if you can find the info I would be more then happy to host it
Rick
On Sun, Aug 22, 2010 at 10:16 PM, w5jr.mike w5jr.li...@att.net wrote:
Is there a refreshed URL for the site regarding Maxtrac conversions to 222
MHz? I thought I surfed to the site a few weeks ago but didn't bookmark it.
Thanks Scott thats info we can NOT lose ...
Rick va3rzs
On Tue, Aug 24, 2010 at 1:29 PM, Scott Zimmerman n3...@repeater-builder.com
wrote:
I found a phone number for Glenn. I called and left a message offering
web space on the RB site for his 222 maxtrac conversion article.
Hopefully
I like my GE phoenix solid radio .. it has been running APRS in my van and
at the repeater for years with no problems ..
SOLID radio ...
Rick
On Sat, Aug 28, 2010 at 10:18 AM, mwbese...@cox.net wrote:
A Maxtrac would probalby do the job. It takes some work to get it down
below 146 MHz
if you keep your eyes open you can find 220 duplexers at a good price ..
Email Bob Morton and I am sure he can find you one at a good price .. I had
2 from him and love his work
and the shipping cost of a 220 duplexer is not that bad either
On Mon, Aug 30, 2010 at 8:44 PM, cmcclel...@aol.com
My 2 duplexers are in a space with no heat and no air .. and no problems
Keep them off a COLD floor and you should be fine as they can move with the
temp in the room they are in
On Tue, Aug 31, 2010 at 1:42 PM, ka9qjg ka9...@wowway.com wrote:
Wow this must of Really been a Dumb question ,
Thats the same duplexer I had .. built my Bob Mortorn when he was at
sinclair .. never had that problem here though
Rick va3rzs
On Tue, Aug 31, 2010 at 2:17 PM, Roger Stacey va...@telus.net wrote:
On Vancouver Island B.C we do have humidity. The site is at 4400 ft.
Roger
VA7RS
-
whats bs ?
if they want to use IRLP on there Allstar node then build the software to
allow it to run with IRLP
Just like the Echolink-IRLP guys did ..
you cant run both at the same time but saves having more then 1 pc at the
repeater site
On Thu, Sep 9, 2010 at 12:22 AM, Kris Kirby
I have been an IRLP owner for I would say 10 years now .. when the node #'s
were 3 numbers not 4 .. its a great service just like Echo-Link and now
D-Star and others .. now to get D-Star and IRLP to play :) that would be
fun !
On Thu, Sep 9, 2010 at 10:04 AM, Skip freebsd...@hotmail.com wrote:
66 matches
Mail list logo