Re: [Rosegarden-user] midi commands from Rosegarden
That's an honest answer. Thanks I completely understand the challenge and will continue with three separate commands. On 2020-08-05 15:49, D. Michael McIntyre wrote: On 8/5/20 3:04 AM, Alexandre DENIS wrote: My understanding is that the OP wants it to be written as a single event with all 3 values at once, and then rosegarden sends the 3 low-level events by itself. AFAIK it is not supported. I intended to add support for that many years ago, but Rosegarden's foundation architecture was designed in a way that made the problem very difficult to solve, and I never did. I'm afraid I've lost the details to time. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
That is exactly correct. You summarized the problem perfectly. I would expect that Rosegarden would handle standard midi constructs like 128x128 byte arrays as is common with midi as a single command as it is a fixed midi construct and wont change except for array size. The MSB/LSB/value is nothing else than a 128x128 array with values in the array. Therefore it was logical for me to expect Rosegarden to have single commands for known stable midi constructs that wont go away and is basically permanent. Therefopre I expected in this day and age to see something like Event: controller LSB MSB Value is the standar as a single event edit and executed serially. It makes management of patch changes so much easier rfather than to enter a trinity of serial events. . I strongly suggest that this and other fixed constructs be made available as single events edits to be programmed. It makes it cumbersome to require the user to enter separate events to build a construct such as my example shows. So, now that I know Rosegarden does events without constructs (examples didnt seem to be like that and which confused me) I know where I made the wrong assumption. It will be way more tedious and difficult ro manage, but I will enter the patch changes as serial commands. Thanks. On 2020-08-05 03:04, Alexandre DENIS wrote: On Tue, 04 Aug 2020 17:18:31 -1000 "David W. Jones" wrote: My interpretation of Alexandre's post below is you create separate events for each value to send - two CC events to set the MSB and LSB values, then a Program Change. That would send three succesive MIDI values, yes? Yes, it's doable with separate events. It is a single logical event (programm change with bank), that is sent as 3 MIDI events. My understanding is that the OP wants it to be written as a single event with all 3 values at once, and then rosegarden sends the 3 low-level events by itself. AFAIK it is not supported. It it the same with RPNs/NRPNs which have to be sent as a list of MIDI CCs and are not directly supported in rosegarden. -a. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
On 8/5/20 3:04 AM, Alexandre DENIS wrote: My understanding is that the OP wants it to be written as a single event with all 3 values at once, and then rosegarden sends the 3 low-level events by itself. AFAIK it is not supported. I intended to add support for that many years ago, but Rosegarden's foundation architecture was designed in a way that made the problem very difficult to solve, and I never did. I'm afraid I've lost the details to time. -- D. Michael McIntyre ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
On Tue, 04 Aug 2020 17:18:31 -1000 "David W. Jones" wrote: > My interpretation of Alexandre's post below is you create separate > events for each value to send - two CC events to set the MSB and LSB > values, then a Program Change. > > That would send three succesive MIDI values, yes? Yes, it's doable with separate events. It is a single logical event (programm change with bank), that is sent as 3 MIDI events. My understanding is that the OP wants it to be written as a single event with all 3 values at once, and then rosegarden sends the 3 low-level events by itself. AFAIK it is not supported. It it the same with RPNs/NRPNs which have to be sent as a list of MIDI CCs and are not directly supported in rosegarden. -a. pgpKZCqHMXoAt.pgp Description: OpenPGP digital signature ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
My interpretation of Alexandre's post below is you create separate events for each value to send - two CC events to set the MSB and LSB values, then a Program Change. That would send three succesive MIDI values, yes? Knowing nothing about this level of MIDI, I'm just trying to make sense of things and hope it helps. On August 4, 2020 4:04:47 PM HST, liebre...@grossmann-venter.com wrote: >I will make it easier to understand >I want to send data as follows see the image below. >What is in red I want to have sent. >There is no way to configure an event to do this, although the 3 word >instruction is standard for synths, but Rosegarden has all 3 the fields > >but there is no way in the editor I can enter all three values. >The event editor only allows me to enter the first two values. > >That is the problem. >How do I get around this ? > >"https://i.imgur.com/uDXF9Py.png"; > > >On 2020-08-04 05:24, Alexandre DENIS wrote: >> On Tue, 04 Aug 2020 04:35:10 -0400 >> liebre...@grossmann-venter.com wrote: >> >>> I reversed engineered all the patch select midi and I can change to >>> any patch I want through Midi Ox. So, I know the exact midi >commands. >>> Dont worry about the values I have them all covere. >>> >>> My problem is to enter an event at the start of the track so it >plays >>> that patch rfor the entire patch >>> >>> Unfortunately there is no way in the event editor to enter all three >>> values for the controller function. Only two is seemingly allowed. >>> >>> The third is labeled but never used. the advanced configuration also >>> dont allow the third value. >>> >>> It doesnt seem Rosegarden can do it, ubless someone can show me how >>> to edit an even to include all three the fields as show in the event >>> editor namely >>> >>> Type(Data1) Type(Data1) Value(Data2) >>> >>> "https://i.imgur.com/5im3AQH.png"; >>> >>> Or ANY way to send three successive midi values >>> >> >> Hello, >> >> You have to send 3 separate MIDI messages, each with one data: >> -- MIDI CC #0 for bank MSB >> -- MIDI CC #32 for bank LSB >> -- Program Change for Number. >> >> -a. --- David W. Jones gn...@hawaii.rr.com authenticity, honesty, community http://dancingtreefrog.com Sent from my Android device with F/LOSS K-9 Mail. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
I will make it easier to understand I want to send data as follows see the image below. What is in red I want to have sent. There is no way to configure an event to do this, although the 3 word instruction is standard for synths, but Rosegarden has all 3 the fields but there is no way in the editor I can enter all three values. The event editor only allows me to enter the first two values. That is the problem. How do I get around this ? "https://i.imgur.com/uDXF9Py.png"; On 2020-08-04 05:24, Alexandre DENIS wrote: On Tue, 04 Aug 2020 04:35:10 -0400 liebre...@grossmann-venter.com wrote: I reversed engineered all the patch select midi and I can change to any patch I want through Midi Ox. So, I know the exact midi commands. Dont worry about the values I have them all covere. My problem is to enter an event at the start of the track so it plays that patch rfor the entire patch Unfortunately there is no way in the event editor to enter all three values for the controller function. Only two is seemingly allowed. The third is labeled but never used. the advanced configuration also dont allow the third value. It doesnt seem Rosegarden can do it, ubless someone can show me how to edit an even to include all three the fields as show in the event editor namely Type(Data1) Type(Data1) Value(Data2) "https://i.imgur.com/5im3AQH.png"; Or ANY way to send three successive midi values Hello, You have to send 3 separate MIDI messages, each with one data: -- MIDI CC #0 for bank MSB -- MIDI CC #32 for bank LSB -- Program Change for Number. -a. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
Thank you very much for the response. I need to send always MSB 36 LSB 0 Value 0-127 This is correct and I change patches every day using that on Midiox under wine. I dont know where you get the other MSB,LSB numbers from. My problem is NOT the number values. My problem is how to create an event in Rosegarden. It is completely nonintuitive and I have no clue how to send MSB then LSB then Value in succession as the Event Editor does not allow three numbers to be sent in an event. Only two. Can the event editor be configured to execute a bash script or an executable as an event ? that way i can get rid of the Rosegarden event editor that is too restrictive and I can trigger any midi comaand set I please. Again, my issue is how to make the event editor set up to send 3 values in succession per event and NOT the values itself. The values I know what works. I need to create an arbitrary event that A) Sends three values in succession B) Persists for entire tracki. thats all. Again my problem is with the editor not the values themselves. thanks On 2020-08-04 05:24, Alexandre DENIS wrote: On Tue, 04 Aug 2020 04:35:10 -0400 liebre...@grossmann-venter.com wrote: I reversed engineered all the patch select midi and I can change to any patch I want through Midi Ox. So, I know the exact midi commands. Dont worry about the values I have them all covere. My problem is to enter an event at the start of the track so it plays that patch rfor the entire patch Unfortunately there is no way in the event editor to enter all three values for the controller function. Only two is seemingly allowed. The third is labeled but never used. the advanced configuration also dont allow the third value. It doesnt seem Rosegarden can do it, ubless someone can show me how to edit an even to include all three the fields as show in the event editor namely Type(Data1) Type(Data1) Value(Data2) "https://i.imgur.com/5im3AQH.png"; Or ANY way to send three successive midi values Hello, You have to send 3 separate MIDI messages, each with one data: -- MIDI CC #0 for bank MSB -- MIDI CC #32 for bank LSB -- Program Change for Number. -a. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
On Tue, 04 Aug 2020 04:35:10 -0400 liebre...@grossmann-venter.com wrote: > I reversed engineered all the patch select midi and I can change to > any patch I want through Midi Ox. So, I know the exact midi commands. > Dont worry about the values I have them all covere. > > My problem is to enter an event at the start of the track so it plays > that patch rfor the entire patch > > Unfortunately there is no way in the event editor to enter all three > values for the controller function. Only two is seemingly allowed. > > The third is labeled but never used. the advanced configuration also > dont allow the third value. > > It doesnt seem Rosegarden can do it, ubless someone can show me how > to edit an even to include all three the fields as show in the event > editor namely > > Type(Data1) Type(Data1) Value(Data2) > > "https://i.imgur.com/5im3AQH.png"; > > Or ANY way to send three successive midi values > > Hello, You have to send 3 separate MIDI messages, each with one data: -- MIDI CC #0 for bank MSB -- MIDI CC #32 for bank LSB -- Program Change for Number. -a. pgpfoyoMhI4zE.pgp Description: OpenPGP digital signature ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
I reversed engineered all the patch select midi and I can change to any patch I want through Midi Ox. So, I know the exact midi commands. Dont worry about the values I have them all covere. My problem is to enter an event at the start of the track so it plays that patch rfor the entire patch Unfortunately there is no way in the event editor to enter all three values for the controller function. Only two is seemingly allowed. The third is labeled but never used. the advanced configuration also dont allow the third value. It doesnt seem Rosegarden can do it, ubless someone can show me how to edit an even to include all three the fields as show in the event editor namely Type(Data1) Type(Data1) Value(Data2) "https://i.imgur.com/5im3AQH.png"; Or ANY way to send three successive midi values On 2020-08-04 03:49, Hugo van Galen wrote: e.g. in my cae it would be controller 63 1 1 which would set the first patch. Does this look right ?? That message looks good to me. BUT -- I am not familiar with the Motif unit, but I quickly downloaded the manual. In the MIDI section I do not see controller 63 documented, but on page 44 does reveal it supports the Bank Select MSB/LSB which affects how the Program Change messages get interpreted. I wonder if you should be sending that instead? If my understanding is correct, if you would want the first instrument of the "Normal Voice Preset" you would send a Bank Select MSB of value "63", a Bank Select LSB of value "0" and then a Program Change with value "0". ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
> > > e.g. in my cae it would be > controller 63 1 1 > which would set the first patch. > > Does this look right ?? > That message looks good to me. BUT -- I am not familiar with the Motif unit, but I quickly downloaded the manual. In the MIDI section I do not see controller 63 documented, but on page 44 does reveal it supports the Bank Select MSB/LSB which affects how the Program Change messages get interpreted. I wonder if you should be sending that instead? If my understanding is correct, if you would want the first instrument of the "Normal Voice Preset" you would send a Bank Select MSB of value "63", a Bank Select LSB of value "0" and then a Program Change with value "0". ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
Just want to add to my last response this: In the event editor, it seems I need to add a Controller event Controller Type(data1) Type(data2) Type(Value) as is used in some of the commands here. "https://i.imgur.com/5im3AQH.png"; e.g. in my cae it would be controller 63 1 1 which would set the first patch. Does this look right ?? --Previous message Ok I know exactly what to send to the motif and can send either hex commands or decimal (MSB,LSB,Number) What I just cannot figure out is how to enter (MSB,LSB,Number) at the start of a track so that it is sent. I t can send these commands on waht rosegarden on the same midi connection. There is no need to use the other midi connections. So if someone can point me to how to enter this on a track in Rosegarden, i should be done. I just cannot find the midi track functionality by right clicking on the track you are all describing. On 2020-08-03 15:52, Will Godfrey wrote: In Rosegarden you can embed any MIDI controller into any segment of any track. The most precise way to do this is using the Event editor, where you can set the controller number, it's value and its time within the segment (doesn't have to be at the start). Whenever such a segment is seen by the playing cursor, it's commands will be actioned. Bear in mind the majority of Controllers are channel specific, so if you have several tracks that are active all pointing to the same channel, then all controls will be sent in order if the timeline reaches them. If you start playing part way through, then the embedded controllers *before* that point won't be seen. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
Ok I know exactly what to send to the motif and can send either hex commands or decimal (MSB,LSB,Number) What I just cannot figure out is how to enter (MSB,LSB,Number) at the start of a track so that it is sent. I t can send these commands on waht rosegarden on the same midi connection. There is no need to use the other midi connections. So if someone can point me to how to enter this on a track in Rosegarden, i should be done. I just cannot find the midi track functionality by right clicking on the track you are all describing. On 2020-08-03 15:52, Will Godfrey wrote: In Rosegarden you can embed any MIDI controller into any segment of any track. The most precise way to do this is using the Event editor, where you can set the controller number, it's value and its time within the segment (doesn't have to be at the start). Whenever such a segment is seen by the playing cursor, it's commands will be actioned. Bear in mind the majority of Controllers are channel specific, so if you have several tracks that are active all pointing to the same channel, then all controls will be sent in order if the timeline reaches them. If you start playing part way through, then the embedded controllers *before* that point won't be seen. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
I will try to get this programmed. If it works it will be absolutely great. In patchage, rosegarden shows external controller routable midi. I guess that is what I need to use to send commands to the Motif Synth which is available below it in 4 channels. See "https://i.imgur.com/yszHYQh.png"; I will have to read up the manual to try and configure the correct midi commands in the event list On 2020-08-03 15:52, Will Godfrey wrote: In Rosegarden you can embed any MIDI controller into any segment of any track. The most precise way to do this is using the Event editor, where you can set the controller number, it's value and its time within the segment (doesn't have to be at the start). Whenever such a segment is seen by the playing cursor, it's commands will be actioned. Bear in mind the majority of Controllers are channel specific, so if you have several tracks that are active all pointing to the same channel, then all controls will be sent in order if the timeline reaches them. If you start playing part way through, then the embedded controllers *before* that point won't be seen. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
In Rosegarden you can embed any MIDI controller into any segment of any track. The most precise way to do this is using the Event editor, where you can set the controller number, it's value and its time within the segment (doesn't have to be at the start). Whenever such a segment is seen by the playing cursor, it's commands will be actioned. Bear in mind the majority of Controllers are channel specific, so if you have several tracks that are active all pointing to the same channel, then all controls will be sent in order if the timeline reaches them. If you start playing part way through, then the embedded controllers *before* that point won't be seen. -- Will J Godfrey http://www.musically.me.uk Say you have a poem and I have a tune. Exchange them and we can both have a poem, a tune, and a song. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
So what you say is if I have say five tracks and each has midi commands configured like youi describe, then if I played one track and then switch to another, it is not going to send the midi commands pre-configured for the new track when I play the new one. ? If I understand you correctly that is the case. Then I dont even know why these right click midi commands are there as it is useless as it only executes at program start not when you play a track. Do I understand you right? I need the midi commands sent for a specific track when I play the track. On 2020-08-03 07:25, Hugo van Galen wrote: If you right click on a track you can choose the "Event List Editor". There you can insert the Program Change or Controller messages that are specific to your synth to select the correct patch. You obviously insert these before all the other events. However, Rosegarden will only send them at the start of the song though (or rather, at the timestamp configured) -- not when you select the track. Perhaps that is what you are looking for, though? It is even possible to change the patch halfway through the song to select a different instrument. Hope this helps. Regards, Hugo ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
If you right click on a track you can choose the "Event List Editor". There you can insert the Program Change or Controller messages that are specific to your synth to select the correct patch. You obviously insert these before all the other events. However, Rosegarden will only send them at the start of the song though (or rather, at the timestamp configured) -- not when you select the track. Perhaps that is what you are looking for, though? It is even possible to change the patch halfway through the song to select a different instrument. Hope this helps. Regards, Hugo On Sat, 1 Aug 2020 at 10:50, wrote: > It would be nice to read it, sounds like what I need, but the link does > not work > Thanks > > > > On 2020-08-01 03:37, dgenon--- via Rosegarden-user wrote: > > On 31/07/20 03:46, liebrecht@... wrote: > >>> it possible to send cujstom midi commands to a specific controller > >>> from Rosegarden once a track is selected.. > > > > I was able to add undefined control codes in Rosegarden to drive > > the portamento of ZynAddSubFx. If this is the operation you want to > > do, I wrote an article in this French "LinuxMao" site, here: > > http://linuxmao.org/Zynaddsubfx+-+%C3%A9changes+MIDI+avec+Rosegarden. > > voir le paragraphe : > > > > -Entrer de nouveaux codes contrôles dans RoseGarden- > > -Enter new control codes in RoseGarden.- > > > > I hope you will find a clue there. > > ___ > > Rosegarden-user mailing list > > Rosegarden-user@lists.sourceforge.net - use the link below to > > unsubscribe > > https://lists.sourceforge.net/lists/listinfo/rosegarden-user > > > ___ > Rosegarden-user mailing list > Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe > https://lists.sourceforge.net/lists/listinfo/rosegarden-user > ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
It would be nice to read it, sounds like what I need, but the link does not work Thanks On 2020-08-01 03:37, dgenon--- via Rosegarden-user wrote: On 31/07/20 03:46, liebrecht@... wrote: it possible to send cujstom midi commands to a specific controller from Rosegarden once a track is selected.. I was able to add undefined control codes in Rosegarden to drive the portamento of ZynAddSubFx. If this is the operation you want to do, I wrote an article in this French "LinuxMao" site, here: http://linuxmao.org/Zynaddsubfx+-+%C3%A9changes+MIDI+avec+Rosegarden. voir le paragraphe : -Entrer de nouveaux codes contrôles dans RoseGarden- -Enter new control codes in RoseGarden.- I hope you will find a clue there. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
On 31/07/20 03:46, liebrecht@... wrote: >> it possible to send cujstom midi commands to a specific controller >> from Rosegarden once a track is selected.. I was able to add undefined control codes in Rosegarden to drive the portamento of ZynAddSubFx. If this is the operation you want to do, I wrote an article in this French "LinuxMao" site, here: http://linuxmao.org/Zynaddsubfx+-+%C3%A9changes+MIDI+avec+Rosegarden.";>http://linuxmao.org/Zynaddsubfx+-+%C3%A9changes+MIDI+avec+Rosegarden. voir le paragraphe : -Entrer de nouveaux codes contrôles dans RoseGarden- -Enter new control codes in RoseGarden.- I hope you will find a clue there. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
I will make it simple. 1) I have a Motif XS8 synth or any other synt e.g 2) I have a midi lookup table by which I can send midi commands I have to the synth to change the patches on the synth. (e.g from piano to flute or whatever). 3) I have Rosegarden tracks each that has recorded synth midi in them. 4) Each track however requires a different patch on the synth for playback What I require is 1) When I solo one of the midi tracks in Rosegarden, then Rosegarden should sen my supplied midi commands to the synth so that the track is played back on the synth with the correct patch change on the synth. More simple I cannot describe it. Can Rosegarden be configured to send such track dependent predefined midi commands unique for each track to the synth? Obviously this must be done on a separate midi connection from the standard Rosegarden midi which plays back midi tracks flawlessly on my synth. At the moment I have to go select the correct patch on the synth if I want to play back a track .. cumbersome. On 2020-07-31 02:56, Lorenzo Sutton wrote: On 31/07/20 03:46, liebre...@grossmann-venter.com wrote: Is it possible to send cujstom midi commands to a specific controller from Rosegarden once a track is selected? It would be great if I select a track in Rosegarden and it can then send the midi data to my Motif XS8 to select the required patch. All I want to know if custom Midi commands to a specified midi controller can be sent from Rosegarden. I will program the rest to get it to work on Motif. What exactly do you mean by MIDI 'commands'? Are these MIDI controllers? SysEx? Rosegarden can definitely send controllers. Lorenzo. Thanks. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
On Fri, 31 Jul 2020 08:56:29 +0200 Lorenzo Sutton wrote: >On 31/07/20 03:46, liebre...@grossmann-venter.com wrote: >> Is it possible to send cujstom midi commands to a specific controller >> from Rosegarden once a track is selected? >> >> It would be great if I select a track in Rosegarden and it can then send >> the midi data to my Motif XS8 to select the required patch. >> >> All I want to know if custom Midi commands to a specified midi >> controller can be sent from Rosegarden. I will program the rest to get >> it to work on Motif. > >What exactly do you mean by MIDI 'commands'? Are these MIDI controllers? >SysEx? > >Rosegarden can definitely send controllers. > >Lorenzo. ... and it lets you build up NRPNs as discrete CCs -- Will J Godfrey http://www.musically.me.uk Say you have a poem and I have a tune. Exchange them and we can both have a poem, a tune, and a song. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
Re: [Rosegarden-user] midi commands from Rosegarden
On 31/07/20 03:46, liebre...@grossmann-venter.com wrote: Is it possible to send cujstom midi commands to a specific controller from Rosegarden once a track is selected? It would be great if I select a track in Rosegarden and it can then send the midi data to my Motif XS8 to select the required patch. All I want to know if custom Midi commands to a specified midi controller can be sent from Rosegarden. I will program the rest to get it to work on Motif. What exactly do you mean by MIDI 'commands'? Are these MIDI controllers? SysEx? Rosegarden can definitely send controllers. Lorenzo. Thanks. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
[Rosegarden-user] midi commands from Rosegarden
Is it possible to send cujstom midi commands to a specific controller from Rosegarden once a track is selected? It would be great if I select a track in Rosegarden and it can then send the midi data to my Motif XS8 to select the required patch. All I want to know if custom Midi commands to a specified midi controller can be sent from Rosegarden. I will program the rest to get it to work on Motif. Thanks. ___ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user