Hello Renee,
100 pounds of sodium chlorite will keep you going for quite awhile. However,
there are thousands of uses for it, so it may not last as long as you think.
A comment on safety... A 28% concentration sodium chlorite solution is
dangerous to handle, and also has mailing
Hello Dick,
It seems that this is an area that has been looked at before and there are
some theories on the quality of EIS produced at high voltages.
Unfortunately, extensive testing is cost prohibitive, so you will just have
to go with the theory.
Low voltage, slow production, seems to be well
Hello Ode,
Just when I think I am beginning to understand EIS, you throw out another
curve ball. At least hydrogen and oxygen are somewhat stable and uniform in
distilled water.
My experience so far is that I am able to get consistent conductivity from
batch to batch. My electrodes are
Hello Renee,
Feel free to use anything I post.
Yogurt manufacturers took a look at using acidified sodium chlorite to control
mold growth in their packages. The quickly abandoned the idea when they found
that it was destroying their yogurt by killing all of the bacteria. I
generally view
Hello Marshall,
I only did the reduction to 60 uS once just to see what happened. While the
solution was basically clear, you didn't need a laser to observe the Tyndall
effect. A pen light worked fine. As I recall, I had a few larger sparkle
particles in the solution.
I didn't keep it very
Hello Marshall,
Is is possible to weigh the anode before and after and get an idea of how
much is in the solution?
Once again we are looking at very small measurements, but if you did several
batches between weighing, you may get an agerage.
The may be opptimistic, but could give a ballpark
Hello Tony,
My first priority is to brew batches with consistent conductivity. Once I
get that down reasonably well, I will move on to explore the relationship
between conductivity and PPM.
Ode warns that my first goal may be futile, but I may be able to get it down
to a range. Marshall has
Hello Renee,
In order to activate sodium chlorite, the PH has to be lowered. Ascorbic acid
has a low PH and is capable of activating sodium chlorite. The trade off is
that ascorbic acid is also an antioxidant, so some of the chlorine dioxide is
used up in the process. You end up with a
Hello Renee,
That is a very good question, and I don't know the answer.
However, I have always found it odd that a person will choke their head off
while smoking their first cigarette, then end up smoking a pack, or several
packs, a day without hardly choking at all. It could be something
Hello Renee,
While I have no experience with liposomal vitamin C, the answer is very simple.
If the PH of the solution ends up acidic, it will activate sodium chlorite.
Now, what happens afterward may need to be explored. Remember the basics. To
activate sodium chlorite you have to reduce
Hello Renee,
I finally got around to picking up some MSM and running some tests.
It looks like MSM neutralizes about 92 - 100% of the free chlorine dioxide in
the MMS-Lite mixture when you add chlorine dioxide to the solution. It also
seems to inhibit the release of chlorine dioxide when you
Hello Renee,
I would love to join up and chat with the people on the other list. How do I
find it?
Birds pick the galvanizing off of the wire in their cages and poison
themselves. Adding some sodium chlorite to their drinking water chelates the
metals out of their system and they no longer
Hello Renee,
Since MSM has a sulphur component and chlorine dioxide scrubs sulphur from the
air and in solutions, I would guess that the MSM us being oxidized by the
chlorine dioxide. Unfortunately, I am not set up to test for residual MSM, so
I can't fully answer the question.
Roy's success
Hello Lisa,
Not a gell but...
I fortified some Dr Bonners soap. Does that count?
I concentrated some EIS from about 10 uS to about 30 uS then added that to the
soap. I would think you could do something similar for the gell. I
concentrated the solution by heating it and evaporating some of
Hello Ode,
Just trying to understand this a little bit more and thinking out loud...
I have a SG6 generator that uses flat strips of silver. If I bent the flat
strips (just a little) so the edges were slightly further away from each
other would that help to minimize the edge effects?
Also,
Hello Gary,
Until someone comes up with the relationship between conductivity and PPM of
silver, it is all a ballpark best guess.
However, the meter has a lot of other uses beside trying to guess at the
concentration of EIS.
If you purchase distilled water, how do you know it is of high
I am on a crusade when it comes to vitamin D.
I am asking everyone to check and know what their blood levels of vitamin D
are. Once you know where you stand, then you can visit
www.vitamindcouncil.org and figure out where you should be.
To check the blood levels of vitamin D, you need to have
Hello Steve,
It may also be important to figure out what oxidizes silver to form these
oxides.
Tom
- Original Message -
From: Norton, Steve stephen.nor...@ngc.com
To: silver-list@eskimo.com
Sent: Wednesday, March 10, 2010 8:27 AM
Subject: CSSilver Oxide Formation
Several studies I
Hello Rainie,
I would consider a multiple approach, especially if the MRSA is evident on the
surface of the skin.
Home brewed EIS is generally in the 10 PPM range, or a little higher. You can
use this, but it may also be worth it to purchase some Mesosilver or Utopia CS
to add some
Hello Ode,
If I am understanding you correctly, that would indicate that all of the
silver partials in EIS are oxidized...
I was really looking forward to putting the EIS into the force field
generator and letting the dialithium crystals take a shot at oxidizing them.
Oh well, it's best to keep
Hello Marshall,
When I add ascorbic acid to distilled water my PWT meter goes off of the
charts.
Does the ascorbic acid add ions to the water, or what am I measuring?
Tom
- Original Message -
From: Marshall Dudley mdud...@king-cart.com
To: silver-list@eskimo.com
Sent: Thursday, March
Hello Pat,
I just completed a round to raise my D levels, and had the test done
yesterday. I will find out tonight how well I am doing.
I started at 17, after a month on 2000 IU a day the level rose to 25. At
this point my doctor put me on a prescription of 5 IU for 12 weeks while
I
Hello Pat,
I believe there are kits available and the test runs about $75. You draw your
own blood and send it in.
Tom
- Original Message -
From: Pat Lawrie
To: silver-list@eskimo.com
Sent: Friday, March 12, 2010 6:33 AM
Subject: Re: CSVitamin D
What is the cost of the
8:14 AM
Subject: Re: CSVitamin D
Why a prescription? To be able to put it on insurance? We have bottles
of 5,000 IE at the drug and grocery store pretty cheaply.
Marshall
poast wrote:
Hello Pat,
I just completed a round to raise my D levels, and had the test done
yesterday. I
From: poast po...@prodigy.net
To: silver-list@eskimo.com
Sent: Fri, March 12, 2010 10:33:57 AM
Subject: Re: CSVitamin D
Hello Pat,
I just completed a round to raise my D levels, and had the test done
yesterday. I will find out tonight how well I am doing.
I started at 17
Hello Marshall,
3 days ago I put a pinch of ascorbic acid in some EIS and have stored this
solution in a white 250 ml HDPE bottle. I took the lid off this morning and
noticed that some of the silver had precipitated out. I shook the bottle
and it went back into solution.
There wasn't a large
the solution acid enough to make the colloid
unstable. I need to test and see if I neutralize the free acid if the
same thing happens.
Marshall
poast wrote:
Hello Marshall,
3 days ago I put a pinch of ascorbic acid in some EIS and have stored
this
solution in a white 250 ml HDPE bottle. I
: Re: CSMaking 100% colloidal EIS
poast wrote:
Hello Marshall,
Some additional information...
My EIS ends up with a PH of 6.5. The solution that I added the ascorbic
acid to ended up with a PH of 3.5.
I know that some reactions are sensitive to PH, so an idea would be to
pick
Hello Steve,
Original color was clear, upon adding the ascorbic acid the solution turned
cloudy but the color was still clear, after a few days most of the
cloudiness cleared up and it is still clear in color. The tyndall effect is
much stronger after adding the ascorbic acid.
Tom
-
To: silver-list@eskimo.com
Sent: Wednesday, March 17, 2010 12:58 PM
Subject: Re: CSMaking 100% colloidal EIS
poast wrote:
Hello Marshall,
Another interesting observation...
The oxidation reduction potential of my EIS is around 0.550 mV. The
solution that I added the ascorbic acid to comes
reduced (now silver
metal). Unless I am misinterpreting, that is what I would expect.
However if all the silver was reduced though, the question for me is,
what is still there that is oxidizing, that is why is the ORP not 0?
Marshall
poast wrote:
Hello Marshall,
Oxygen reduction
relationship to PH. While 20 is not quite 0, it is
pretty close, and I am still a little acidic with the solution.
The amount of silver on the bottom of the bottle looks to be about the same
as was observed in the other bottle.
Tom
- Original Message -
From: poast po...@prodigy.net
Hello Tina,
I have heard that bitters are an excellent way to rebuild the gallbladder. You
have to remember to drink a lot of water, but that seems to be easy to do.
Take a half a dropper of bitters 15 - 30 minutes before meals.
Tom
- Original Message -
From: Christina Mattson
- Original Message -
From: poast
To: silver-list@eskimo.com
Sent: Monday, March 22, 2010 8:56 PM
Subject: Re: drinking quart of water, and argryia cure, was Re: CSkidney
stones Herbal Tea Cure
Hello Tina,
I have heard that bitters are an excellent way to rebuild
Hello Carol,
Straight and placed right on the tongue.
Tom
- Original Message -
From: carolG
To: silver-list@eskimo.com
Sent: Monday, March 22, 2010 6:59 PM
Subject: Re: drinking quart of water, and argryia cure, was Re: CSkidney
stones Herbal Tea Cure
Tom, bitters in water or
Hello Ode,
I wonder if the results would have been different if he used a solution with
more ionic silver in it.
Tom
- Original Message -
From: Ode Coyote odecoy...@windstream.net
To: silver-list@eskimo.com
Sent: Tuesday, March 23, 2010 2:41 AM
Subject: Re: CSKid does an experiment
Hello Ode,
You may find this interesting to read...
http://www.wipo.int/pctdb/en/wo.jsp?wo=2006088790IA=US2006005024DISPLAY=DESC
Using a 5% sodium chlorite solution and 6% HCl as the activator you can mix
up this solution by placing 5 ml (1 teaspoon) of 5% sodium chlorite in a
glass and add 5
Hello Steve,
I get my NaClO2 powder from GFS chemicals. It comes in 2.5 kg bottles, and
I go through about 5 kg a year unless I have some special projects going on.
I believe the price was around $200 for 5 kg with shipping adding another
$30 for the total 5 kg package.
Hello Marshall,
Your method will be ineffective because it is not strong enough.
I believe I followed your instructions properly, but please double check my
efforts.
I mixed 1.75 teaspoons of sodium chlorite powder in 8 ounces of water. I
then mixed 2.5 teaspoons of citric acid powder in 8
I have noticed that near the end of brewing a batch there are some deposites
that form on the electrodes. Some say that indicates that the batch is done
and you should stop brewing. Others say that you can stop the process,
clean off the electrodes, and then continue on until the machine shuts
I am using an SG6 to make my EIS. I have the dial turned almost all the way
to maximum, but just under full stop.
When I am fininshed with a batch, I let it sit for a day, then measure the
conductivity of the solution. It is comming in at about 14 uS. I use white
HDPE bottles for storage and
Hello Marshall,
They are actual measurements.
Here is a link to a label for a sodium chlorite/chlorine dioxide product.
You should begin to get a feel for the difference between available and free
chlorine dioxide in solutions.
http://www.sanivex.com/pdf/EPA_Label.pdf
There are a lot of
Hello Neville,
Thanks.
Do you target a specific uS reading while brewing, or simply note what you end
up with?
I seem to get repeatable uS readings right after the batch is finished, but
there seems to be some variation in how the batch settles out. The one
variable I haven't tracked is
Hello Marshall,
The theory is that the chlorous acid is formed during the activation
process. Depending on the PH, some free chlorine dioxide is released into
the solution. There is a rough stability at this point, but as the free
chlorine dioxide is used up the chlorous acid breaks down
Hello Kathy,
Chlorine dioxide is a respiratory irritant. People who are exposed to it
developed asthma like symptoms. I am not sure if it behaves the same from the
inside out, but I would advise extreme caution should you actually decide to
take this route.
Tom
- Original Message
One of my favorite soaps is Dr. Bonners Pure Castile Soap.
Now while it is very good, there is always room for improvement... :)
Here is my version of an anti bacterial version of this soap.
Place 8 ml of 5% sodium chlorite in a glass and add 25 ml of roughly 10 PPM
EIS. Swirl to mix and add
I happen to have two waxed milk cartons that we used up the milk in. We
usually rinse the carton out to avoid the odor that comes from milk aging.
This time, instead of rinsing I simply put a splash of EIS into each carton.
The cartons were left on the counter and they did recieve afternoon sun,
-list@eskimo.com
Sent: Wednesday, April 07, 2010 6:48 AM
Subject: Re: CSFun with improved soap
How long will this keep?
Dan
On Tue, Apr 6, 2010 at 11:19 PM, poast po...@prodigy.net wrote:
One of my favorite soaps is Dr. Bonners Pure Castile Soap.
Now while it is very good, there is always room
Hello Renee,
This product is highly recommend and works very well.
http://www.biocidesystems.com/room-shocker-30-day-time-release--medi30.html
You can mix your own, but when you mix the two chemicals together, the reaction
kicks in and it ends up being a little stronger than you planned. The
Oops...
I forgot to mention that this solution has a PH of around 3. If you add
about 1/2 teaspoon of baking soda to it, the PH is raised to about 6.5.
Tom
- Original Message -
From: poast po...@prodigy.net
To: silver-list@eskimo.com
Sent: Wednesday, March 24, 2010 12:06 PM
Subject
Hello Kathryn,
That is exactly why chlorine dioxide is so superior to chlorine. While they
are in the same family, their mode of action is very different.
Chlorine acts by coming into contact with the mold. While in contact, it
oxidizes it, and at the same time chlorinates it leaving a
Hello Kathy,
I was just wondering...
Have you been able to identify the bacteria, fungus, or virus that causes
asthma?
Chlorine dioxide is used to kill off bacteria, fungi and viruses. If you can
identify the one that you are dealing with, you can get an idea of what it
takes to kill if
could have a
fungus, always given anti-botics (Maybe several doses0 and prednisone. Any
help would be appreciated, Thanks, Kathy
- Original Message -
From: poast
To: silver-list@eskimo.com
Sent: Sunday, April 11, 2010 10:34 PM
Subject: Re: CSSolid sodium chlorite
?
Any ideas?
Tom
- Original Message -
From: poast po...@prodigy.net
To: silver-list@eskimo.com
Sent: Wednesday, March 17, 2010 11:45 AM
Subject: Re: CSMaking 100% colloidal EIS
Hello Steve,
Original color was clear, upon adding the ascorbic acid the solution
turned
cloudy
I have been exercising some EIS over the past few days.
I started out with a solution that had a conductivity of about 15 uS.
I added a very small amount of ascorbic acid. The solution turned amber brown,
then went to grey. However, when I held it up to sunlight, it was more amber,
but under
Hello Malcolm,
OK, so I am seeing a build up on ascorbic acid ions.
Do you think this solution is good for anything?
Would you drink it?
Does a reaction something like this go on inside the body?
Tom
- Original Message -
From: Malcolm s...@asis.com
To: silver-list@eskimo.com
Sent:
Hello Dee,
I would like to know what I ended up with too.
The problem is that I only seem to be able to make clear EIS. Clear can be
boring at times, so I thought I would spice things up a little... :)
Actually I was just interested to see if the process was reversible. That
part of the test
Hello Dee,
I would recommend using distilled water. That way you know what you have.
Sometimes tap water can contain things that can reduce the strength of your
solution. Distilled water is usually free from impurities.
Tom
- Original Message -
From: Dorothy Fitzpatrick
Hello Leslie,
My son complains of the drinking water in his city. We took the PWT meter
and checked our water, which is absolutely great, and then added sea salt to
distilled water to get the same conductivity reading. We came up with
adding 0.6 grams of the sea salt to 1 gallon of distilled
-
From: poast po...@prodigy.net
To: silver-list@eskimo.com
Sent: Sunday, April 18, 2010 12:32 AM
Subject: Re: CSH202 - again
Hello Leslie,
My son complains of the drinking water in his city. We took the PWT
meter
and checked our water, which is absolutely great, and then added sea
- Original Message -
From: Leslie leslie1...@windstream.net
To: silver-list@eskimo.com
Sent: Saturday, April 17, 2010 8:53 PM
Subject: Re: CSH202 - again
Did you use that Himalaya salt or plain sea salt from the health food
store?
I use that anyway.
- Original Message -
From: poast
OK,
tony
On 16 Apr 2010 at 21:09, poast wrote about :
Subject : CSYO YO EIS
I have been exercising some EIS over the past few days.
I started out with a solution that had a conductivity of about 15 uS.
I added a very small amount of ascorbic acid. The solution turned amber
brown
Hello Ode,
Correction... Distilled water is like rain water before it falls through
all the dust and other crap in the air.
Tom
- Original Message -
From: Ode Coyote odecoy...@windstream.net
To: silver-list@eskimo.com
Sent: Saturday, April 17, 2010 11:36 PM
Subject: Re: CSH202 -
Hello Ode,
Mentos and soda pop...? Is there a story that goes with that?
Tom
- Original Message -
From: Ode Coyote odecoy...@windstream.net
To: silver-list@eskimo.com
Sent: Sunday, April 18, 2010 12:02 AM
Subject: Re: CSH202 - again
Your mouth dried out because you slept with it
,
Malcolm
On Sat, 2010-04-17 at 21:21 -0800, poast wrote:
Hello Malcolm,
OK, so I am seeing a build up on ascorbic acid ions.
Do you think this solution is good for anything?
Would you drink it?
Does a reaction something like this go on inside the body?
Tom
- Original
Hello Lisa,
I would suggest mixing up a chlorous acid solution and fogging it in.
If you don't have a fogger, a garden sprayer will work.
Chlorous acid is made by adding citric acid to sodium chlorite.
Do you have access to these chemicals or know anything about them?
When you apply this
Hello Leslie,
MMS is a particular concentration of sodium chlorite and a protocol for
ingesting it. There are many different concentrations of sodium chlorite that
are used in industry. One industrial use involves keeping mold and mildew from
forming in areas like walk in coolers. MMS is
for a pH meter?
Cheers, Roger B
NZ
On 19/04/2010, at 2:24 PM, poast wrote:
Hello Malcolm,
While I totally agree with you, it is just too much fun to simply
stop.
This batch will be played with to death and never consumed.
The saga continues.
I decided to add some baking soda
have to do another set on each
AddAdd, of what happens with time. That's what we are looking for yes?
Have fun,
Tony
On 18 Apr 2010 at 17:24, poast wrote about :
Subject : Re: CSYO YO EIS
Hello Tony,
My distilled water starts at 0.3 uS.
Add ascorbic acid and it jumps up to 80 uS
Hello Ode,
Oh my, where have I been... I totally missed out on that. Raised 3 boys
and never once had them bring this up.
Wow. I am going to have to try it out.
Tom
- Original Message -
From: Ode Coyote odecoy...@windstream.net
To: silver-list@eskimo.com
Sent: Monday, April 19,
is that it disrupts digestion of cooked foods. Might
be better on a raw diet or juice fast or a mix of the two.
Thanx
G
__
__
On Sun, Apr 18, 2010 at 10:30 PM, poast po...@prodigy.net wrote:
Hello Lisa,
I would suggest mixing up
Hello Bodhisattva,
Yes, D3 is used to kill rodents...
However, did you happen to notice the amounts needed?
I believe the LD50 for rats is around 43 mg/kg of weight.
The standard dose of D3 recommended for people is 5000 IU.
D3 resin has 2800 IU per gram, or 28000 IU per milligram.
If a
Hello Tina,
No. It is difficult to get enough light from LED's to do much good, unless you
get a whole pannel of them.
Stick with the D3 suppliments.
Tom
- Original Message -
From: Christina Mattson
To: silver-list@eskimo.com
Sent: Wednesday, April 21, 2010 2:24 PM
Subject: Re:
Hello Bodhisattva,
Do you happen to know what your blood levels of vitamin D are?
You may be in an area that has the proper sun and may spend enough time outside
to get all the D you need. If that is the case, you don't need to worry about
D.
On the other hand, if your vitamin D levels are
Hello PT,
Mix up a glass of chlorine dioxide and dunk the shower head into it and hold it
for 30 seconds. No more bugs.
Tom
- Original Message -
From: needling around
To: silver-list@eskimo.com
Sent: Thursday, April 22, 2010 12:30 PM
Subject: Re: CSNasal spray
Hello Beth,
I am under the impression that HDPE and PET plastic is stable for use with
ionic silver concentrations of 20 PPM or lower.
Tom
- Original Message -
From: Bethany Methven
To: silver-list@eskimo.com
Sent: Thursday, May 06, 2010 8:09 AM
Subject: CSIonic silver in
I have a small abrasion on my forearm. I decided to dip a cotton ball in
some of my EIS concentrate and tape it to my arm for a couple of hours. I
was out in the sun for part of that time. When I came back in, I noticed
that the cotton ball had turned brown.
I then took a fresh cotton ball,
Hello Marshall,
So how did I get hydrogen sulfide, sulfuric acid, or other sulfur compounds
into my EIS while I was making it?
By the way, I had a sample of Silver Biotics EIS do the same thing.
Am I correct in concluding that EIS is photo sensitive?
Tom
- Original Message -
From:
Hello Ode,
OK, that makes sense.
Thanks.
Tom
- Original Message -
From: Ode Coyote odecoy...@windstream.net
To: silver-list@eskimo.com
Sent: Thursday, May 13, 2010 1:28 AM
Subject: Re: CSBrown EIS concentrate - What is happening?
As ionic silver evaporates, the ions oxidize into
- What is happening? Photographic
memory?
If I recall, you were applying it to your skin. If so then it could be
from the oils on your skin or sweat on your skin. In you case I believe
it was from oils on your skin.
Marshall
poast wrote:
Hello Marshall,
So how did I get hydrogen
Hello Garrick,
If that doesn't work, simply add a strong solution of chlorine dioxide to the
water in the jar and let it sit overnight.
Tom
- Original Message -
From: Garrick
To: silver-list@eskimo.com
Sent: Wednesday, May 19, 2010 7:03 AM
Subject: CSDecontaminating
Hello Ruth,
You can used either activated or unactivated sodium chlorite for oral
hygiene.
If your mouth is in bad shape, start off with a rinse using activated,
then follow it with a swish of unactivated.
Take a 500 ml container and fill it with water. Add to that 3.7 ml of
22.4% sodium
Hello Dan,
While I don't know the exact ratio of the various electrolytes to use, I
would suggest using a conductivity meter to adjust amounts. Pick up some
mineral water and measure its conductivity. Then add your electrolytes
and try to come close to matching the conductivity of the mineral
!! And thank one of our members for a
protocol that really worked for me thank you Poast it does work !!! that is
for foot fungus on feet and under nails Sodium Chlorite and hcl you have to
break down the mixtures to be able to soak your feet for one hour a day for
five days straight it was the only
Hello Pat,
If you are able to get the proper sodium chlorite solution mixed up, it is
very effective against mold and mildew. It is actually used commercially
and privately for this purpose. Unfortunately there are few instructions
available on how to do this.
I am new to silver, but I hope
Hello Mike,
If you search on the company Odor Science you should find some packets that
are good for a 30 day time release of ClO2. They are activated by humidity
in the room. I believe it takes about 40% to get them working, but I am not
sure what the exact number is.
A creative use involves
Hello Mike,
In your eagerness to play, keep in mind that chlorine dioxide is a
respiratory irritant at very low concentrations. The general rule is that
if you can detect the odor you are at, or above, the 8 hour workplace limit.
If you happen to get too much into a room, just open it up and let
Hello Sharlene,
Care has to be taken in sizing the packet to be used. However, in general when
the shower is running the fan is on and no odor is detectable. I suppose it is
possible to linger in the bathroom for an extended period of time after a
shower and after the fan has shut off and
Hello Mike,
Interesting...
I prefer HDPE to PETE, but I am usually using stronger chemicals.
Also, I have noticed that the distilled water with higher purity in my area
comes in HDPE containers. I haven't noticed any fouling of the water... but
I haven't really paid much attention to it
Archives
Anyone who makes their own MMS can easily make those as well by mixing
the sodium chlorite and citric acid powders and placing them into a
permeable bag.
Marshall
poast wrote:
Hello Mike,
If you search on the company Odor Science you should find some packets
that
are good
Hello Dick,
I don't know if you have access to sodium chlorite, but on the off chance that
you do here is a way to concentrate its effectiveness in the lower GI tract.
First you also need to pick up some bitters.
The procedure goes like this.
Take a small amount of bitters and hold on the
Hello Dick,
Please understand that this is still in the experimental stage... but
I have had pretty good success in making normal EIS, then using heat to
concentrate it. It takes a little time and effort to do, but it seems to
work very well. I don't know how pure it is, but if I start with a
Hello Dick,
uS is micro siemens, and is a measure of the conductivity of water. Since
the electrodes are spaced 1 cm apart the results come out in uS/cm.
Some instruments are set up to display PPM. They do this by measuring the
conductivity of a salt solution, then multiplying it by a factor
Hello Renee,
I work around these chemicals in industry. This gives me specific training in
handling and working around them, and gives me access to industrial hygienists
for specific questions about exposure.
I have also been involved in some product testing which brought me into contact
don't know
how valid it is, but worth looking into for non toxic means of mold control:
http://www.mightymicrobes.com/effective-microorganisms.html
Sharlene
On Wed, Feb 3, 2010 at 7:29 AM, poast po...@prodigy.net wrote:
Hello Sharlene,
Care has to be taken in sizing
Hello Leslie,
MMS is a high concentration sodium chlorite solution. It has a PH of around
12. When you add an acid to lower its PH, it forms a chlorous acid
solution. Sodium chlorite is also known as stabilized chlorine dioxide.
When the PH is lowered and the chlorous acid is formed, some of
the
cancer
cells? I have been looking for something that will do this. Seems lots of
things you could try but geez would like to know first if possible. I
realize that if it was proven there would be a flood of people using it.
Leslie
- Original Message -
From: poast po...@prodigy.net
Hello Steve,
I am totally new to EIS, so please be gentle with me...
Your opinion seems to be that the best use EIS is to maintain a level in the
body through daily use. You also indicate that you don't think that a large
dose of EIS is effective.
As I ponder this I find myself finding it
through the mucosal tissues without
swallowing. The other is contained in the note regarding the use of Gatortade.
I hope this helps.
- Steve
- Original Message -
From: poast po...@prodigy.net
To: silver-list@eskimo.com silver-list@eskimo.com
Sent: Fri Feb 05 11:03:13 2010
--
From: poast po...@prodigy.net
To: silver-list@eskimo.com silver-list@eskimo.com
Sent: Fri Feb 05 16:03:24 2010
Subject: Re: CS
Hello Steve,
OK, I am beginning to understand.
I have looked at the Altman paper, but have not studied it. I will take
1 - 100 of 154 matches
Mail list logo