[RCSE] Stylus Programming Help

Hi Guys, I have a friend who is not on RCSE that is having trouble programming his Stylus to work with an Electron II F5J plane. Since I am a JR user I am of no help to him so knowing there are a lot of guys out here with programming saavy I thought I would seek help here for him. Okay, the

[RCSE] Stylus for sale... Its beat up...

OK I got this tranny brand new from Tim Renaud...lots of years ago. Slope trash...not ever once stored in a cute box. Its been to lots of far away places. Gordy used it once at tick point. WCx4 stole it once for a week...fair and square. Joe touched it. Larry dropped it. (he won't remember) Abused

Re: [RCSE] Stylus ?

In a message dated 6/14/2008 3:12:52 P.M. Mountain Daylight Time, [EMAIL PROTECTED] writes: If there still are any Stylus owners out there - Having trouble getting aileron differential in landing mode, differential adjustment works fine in normal, launch and reflex modes but not in lan

[RCSE] Stylus ?

If there still are any Stylus owners out there - Having trouble getting aileron differential in landing mode, differential adjustment works fine in normal, launch and reflex modes but not in landing mode. Any suggestions ? TIA Ron Mong

[RCSE] Stylus 4 Sale

Brand new in box Stylus with glider card. Used less than 1 hour. $300 plus $10.00 shipping CONUS Jim McCarthy

Re: [RCSE] Stylus V-tail setup?

Ahh I found it on the JR. The words actually match the function. :-) Thanks buddy, I'll call you if I get stuck. Z [EMAIL PROTECTED] wrote: Dave, It is real tough you go in to the first Menu look up Vtail and activate it. If you need help give me a call. Larry I figured the setup

Re: [RCSE] Stylus Sold

Umm, well, ah, if you want to give me a Stylus. I'll be glad to ease your burden. hehe Bob - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] Cc: Soaring@airage.com Sent: Tuesday, April 29, 2008 5:03 PM Subject: Re: [RCSE] Stylus Sold

Re: [RCSE] Stylus V-tail setup?

Dave, It is real tough you go in to the first Menu look up Vtail and activate it. If you need help give me a call. Larry I figured the setup out I was confusing my Stylus(simple) with my JR 9303(wtf) programming. ;-) If anyone would like you could fill me in on the 9303 v-tail programmin

Re: [RCSE] Stylus Sold

tting ready to test fly it in a start of the art, carboned up ESPADA RL...I'll keep you posted Skip - Original Message - From: "Paul Naton" <[EMAIL PROTECTED]> To: Sent: Tuesday, April 29, 2008 3:11 PM Subject: [RCSE] Stylus Sold > > That went quick...

Re: [RCSE] Stylus V-tail setup?

I figured the setup out I was confusing my Stylus(simple) with my JR 9303(wtf) programming. ;-) If anyone would like you could fill me in on the 9303 v-tail programming, so if I ever come up to speed, I'll know how it's done. Thanks, David No flames please, I'm just having fun David Zucker wro

Re: [RCSE] Stylus Sold

tting ready to test fly it in a start of the art, carboned up ESPADA RL...I'll keep you posted Skip - Original Message - From: "Paul Naton" <[EMAIL PROTECTED]> To: Sent: Tuesday, April 29, 2008 3:11 PM Subject: [RCSE] Stylus Sold That went quick Paul Naton

[RCSE] Stylus V-tail setup?

Sorry if this is a double post but my message doesn't seem to be going out. Hi All, Just trying to setup my F3B Ceres on my Stylus. I was able to get Mike Smiths setup.Everything is moving the proper direction but it has 100% aileron to rudder mix. I haven't done a V-tail on my Stylus in year

[RCSE] Stylus Sold

That went quick Paul Naton president-Radio Carbon Art Producers of High Quality Silent Flight DVDs http://www.radiocarbonart.com Tel: 888-834-2261 Visa/Mastercard Accepted RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTEC

[RCSE] RE: RCSE Stylus 50 mhz module any freq

I had two, but they sold fast. I still have a Futaba (9Z) Tx module on ch3 for $40 Ben Clerx ** Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop000301)

[RCSE] Stylus for Sale

Guys I have a Stylus Tx with Glider Card for $300.00. Multiple Blue Cubes $45.00 each. Please contact me off line Larry Jolly **Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop000301)

Re: [RCSE] Stylus

http://cgi.ebay.com/AIR-TRONICS-TRANSMITTER-STYLUS-GREAT-CONDITION_W0QQitemZ250041842091QQihZ015QQcategoryZ34056QQrdZ1QQcmdZViewItem - Original Message - From: Michael Morjoseph To: soaring@airage.com Sent: Saturday, October 28, 2006 4:01 PM Subject: [RCSE] WTB.Sty

[RCSE] Stylus TX Sold

The Stylus TX has been sold. Thanks Ken. Regards, Dave Corven. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Ema

[RCSE] STYLUS TX FOR SALE.

STILL AVAILABLE !!! STYLUS TX and accessories. Pristene condition with glider and memory cards, one module on Ch 28 and charger and at no extra charge, a George Steiner synthesized tx module. All manuals and all original cartons are are included. $ 450.00, shipping conus included. RCSE-L

[RCSE] Stylus TX FOR SALE

STLUS TX and accessories. Pristene condition with glider and memory cards, one module on Ch 28 and charger and a Geo Steiner synthesized tx module. All manuals and all original cartons are are included. > > $ 475.00 plus shipping. > > Please contact by e-mail or call at 248-515-2153. > > Re

[RCSE] Stylus Sale+

Airtronics Stylus TX for sale.  Includes CH 36 Module and Glider Card.  Factory maintained in good condition with a 1650 MiNh pack and Airtronics charger.  An Airtronics switch harness and Stylus Manuals are included.  All will be shipped in the original factory box.   Price:  $275.00   For

[RCSE] Stylus Sale

 Airtronics Stylus TX for sale.  Includes CH 36 Module and Glider Card.  Factory maintained in good condition with a 1650 MiNh pack and Airtronics charger.  Airtronics Stylus Manuals included.  Will be shipped in its original factory box.   Price:  $275.00   Dale Nutter [EMAIL PROTECTED]

[RCSE] Stylus package sold!

You waited too long. :-(Gordy

[RCSE] Stylus question

Dave, If don't get you problem solved by one of our honorable listees, check out Yahoo groups . I have had several scenarios and problems solved by that list. There is a Airtronics Tech monitoring the list and usually gets back to you on the sam

Re: [RCSE] Stylus question

Mike Smith wrote: Yeah, so Landing Mode has its own set up, so you should be able to get to 100% pos or even neg diff in landing mode, separately from the other modes. Not with the throttle stick at the bottom. If I try to change the point the landing mode engages the throttle backs off. I

Re:[RCSE] Stylus question

Mike Smith wrote: Dave, can't you just set up the Diff the way you want in the landing mode? Diff is the only thing you are setting up right? Mike At 10:25 AM 5/22/2006, you wrote: I'm setting up a D99 pylon racer and using an electron 6 receiver wing type same as our open gliders. Everyt

[RCSE] Stylus question

I'm setting up a D99 pylon racer and using an electron 6 receiver wing type same as our open gliders. Everythings working properly but when I go to set up diff for different modes the landing mode is always on with the throttle stick in the down position. I went into land menu and dialed it ba

[RCSE] Stylus reduced

Stylus reduced: Radio only $299 (with choice of 16, 27 or 44 (new) module and brand new just received today battery) GC $85  MC $65 + shipping  (will only sell separately if package doesn't sell).  Radio is 3 years old.   all for $425 + $10 shipping   Tom T&G32 Mount View DrAfton, VA  2292

Re: [RCSE] Stylus programming help needed

1. The 2A2FER wing type should be used. The other wing types are much more difficult to set up. 2. I've put the motor on the Gear channel (channel 8). 3. I made the launch switch the "arming switch" for the motor. Once it's armed, the right slider is my throttle. Several people suggested that

Re: [RCSE] Stylus programming help needed

1. The 2A2FER wing type should be used. The other wing types are much more difficult to set up. 2. I've put the motor on the Gear channel (channel 8). 3. I made the launch switch the "arming switch" for the motor. Once it's armed, the right slider is my throttle. Several people suggested th

[RCSE] Stylus programming help needed

Title: Stylus programming help needed I have a customer that needs help programming an electric sailplane.  The email I have for Tom Hoopes bounces and Gordy wasn’t sure how to do it and I have no idea.  What he needs is to be able to put the motor on one of the sliders.  He has an older spee

[RCSE] Stylus FS

Have a spare Stylus with Glider Card and Memory Card (can clear out setups or leave on)   Radio only $325 (with choice of 16, 27 or 44 (new) module and brand new just received today battery) GC $95  MC $75  + shipping   all for $450 OBO delivered CONUS   Tom   32 Mount View DrAfton, VA  2292

[RCSE] Stylus Modules for sale

Title: JR Modules Correction!  These are Stylus modules, not JR   From: George Voss [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 01, 2006 3:22 PM To: RCSE Subject: [RCSE] JR Modules   I have a channel 43 and 44 Airtronics Stylus transmitter modules for sale.  $30 each s

[RCSE] Stylus Glider Card

How has the best price on a Stylus Glider Card???LeeCox-Nevada, U.S.A. [EMAIL PROTECTED] Yahoo! Mail Use Photomail to share photos without annoying attachments.

[RCSE] Stylus on E-Bay

FYI Only a few hours left to bid on a new Airtronics Stylus complete aircraft Radio System for sale on E-Bay at:-- http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=6029497434&ssPageName=ADME:L:DS:US:8 The reserve is $420.00. The auction will end at 6:29 PST on Friday Jan 20th Regards Tony Col

[RCSE] Stylus AERO card??

Anyone have a Stylus AERO Card they want to sell  LeeCox-Nevada, U.S.A. [EMAIL PROTECTED] Yahoo! Photos Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.

Re: [RCSE] Stylus For Sale $250 shipped!

Sold! Thank you RCSE! On Nov 1, 2005, at 8:09 PM, Michael Conte wrote: Stylus with: Glider Card 50 Model Memory Card 1650mAh battery pack Ch 39 Module Ch 35 Module 92185 PCM Rx (Ch 39) Neck Strap DSC Cord All Manuals I bought this transmitter new in 2001 and have kept it in a case when I'm

[RCSE] Stylus For Sale $250 shipped!

Stylus with: Glider Card 50 Model Memory Card 1650mAh battery pack Ch 39 Module Ch 35 Module 92185 PCM Rx (Ch 39) Neck Strap DSC Cord All Manuals I bought this transmitter new in 2001 and have kept it in a case when I'm not using it to fly. It's in excellent condition with two exceptions. Th

[RCSE] Stylus For Sale

Stylus with: Glider Card 50 Model Memory Card 1650mAh battery pack Ch 39 Module Ch 35 Module 92185 PCM Rx (Ch 39) Neck Strap DSC Cord All Manuals The Tx is in excellent condition with two exceptions. The antenna has a small kink toward the base but still extends and retracts fully. The lever

[RCSE] Stylus for sale

I just spotted a stylus for sale on RC groups -   http://www.rcgroups.com/forums/showthread.php?t=431200

Re: [RCSE] Stylus ? (found solution)

-- From: "D Hauch" To: Sent: Tuesday, October 04, 2005 3:40 PM Subject: [RCSE] Stylus ? > hi, > how do you get the (elevator trim tab) to work while in Reflex ? > > i'm not looking for a elevatot pre-set while in Reflex, but want the > elevator trim tab to be active while

[RCSE] Stylus ?

hi, how do you get the (elevator trim tab) to work while in Reflex ? i'm not looking for a elevatot pre-set while in Reflex, but want the elevator trim tab to be active while in Reflex. Dave Hauch www.git-r-built.com RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "u

Re: [RCSE] Stylus full house electric setup

In a message dated 9/20/05 9:05:00 A.M. Mountain Daylight Time, [EMAIL PROTECTED] writes: Hello to all,I'm setting up my first electric full house sailplane (Muller Escape) and would like to know what other Stylus users have for their basic setup.  So far, I'm using the F5B setup desc

[RCSE] Stylus full house electric setup

Hello to all, I'm setting up my first electric full house sailplane (Muller Escape) and would like to know what other Stylus users have for their basic setup. So far, I'm using the F5B setup described ever so briefly in the glider card manual. I'd like the flaps to remain on the "throttle s

Re: [RCSE] Stylus programming--Flying Wing

At 02:45 PM 6/11/2005, you wrote: Sounds like having the outer control surfaces be aileron-only, and the inner surfaces being elevator only (or maybe aileron and elevator) might just be perfect. I wouldn't worry much about having the outer surfaces doing elevator functions too. | I have my flap

Re: [RCSE] Stylus programming--Flying Wing

On Sat, Jun 11, 2005 at 04:46:55PM -0400, Tom Broeski wrote: | You don't need much pitch on the Queen (I have 3" control surfaces and | would recommend 2" instead) You really don't need much elevator on any of the flying wings. On the smaller wings where you only have two servos, usually people

Re: [RCSE] Stylus programming--Flying Wing

winds and is comfortable in 15 to 20. Tom - Original Message - From: "Joe Parsons" <[EMAIL PROTECTED]> To: "RCSE" Sent: Saturday, June 11, 2005 3:46 PM Subject: [RCSE] Stylus programming--Flying Wing I'm just finishing a Queen Bee (it's sort of like a Zagi w

Re: [RCSE] Stylus programming--Flying Wing

riginal Message - From: "Joe Parsons" <[EMAIL PROTECTED]> To: "RCSE" Sent: Saturday, June 11, 2005 3:46 PM Subject: [RCSE] Stylus programming--Flying Wing I'm just finishing a Queen Bee (it's sort of like a Zagi with a pituitary problem-span is 100"). It'

[RCSE] Stylus programming--Flying Wing

I'm just finishing a Queen Bee (it's sort of like a Zagi with a pituitary problem-span is 100"). It's a three piece wing, with two servos in the center section and one in each of the two detachable tips. The plans call for connecting the outer elevons servos with a "Y" cable, but I thought it w

[RCSE] Stylus/JR 770 RX help (thank you!)

For everyone who responded to my dilemma, thank you! Also, thank you for not making me feel like a bonehead. I've been into RC for 20 years and had no idea that you couldn't intermingle brands of PCM equipment. It's amazing what can slip through the cracks. Anyway, I'll be getting some 700'

Re: [RCSE] Stylus/JR 770 RX No Workie

and Airtronics are interchangeable on FM but not PCM..Brian > - Original Message - > From: "Michael Conte" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, May 02, 2005 4:53 AM > Subject: [RCSE] Stylus/JR 770 RX No Workie > > > > All, > &

Re: [RCSE] Stylus/JR 770 RX No Workie

Michael Conte <[EMAIL PROTECTED]> wrote: >All, > >I just bought two JR 770 PCM rxs and I can't get them to work with my >Stylus. I know the crystals, battery, and servos are all good. I've >tried the different modulations on the Stylus with no luck (PCM, PPM, >PPM-INV). I've tried both rxs

Re: [RCSE] Stylus/JR 770 RX No Workie

Jr and Airtronics are interchangeable on FM but not PCM..Brian - Original Message - From: "Michael Conte" <[EMAIL PROTECTED]> To: Sent: Monday, May 02, 2005 4:53 AM Subject: [RCSE] Stylus/JR 770 RX No Workie > All, > > I just bought two JR 770 PCM rxs and I ca

[RCSE] Stylus/JR 770 RX No Workie

All, I just bought two JR 770 PCM rxs and I can't get them to work with my Stylus. I know the crystals, battery, and servos are all good. I've tried the different modulations on the Stylus with no luck (PCM, PPM, PPM-INV). I've tried both rxs with no luck. So now I have 2 rxs that I can't g

[RCSE] Stylus with Spoilers and Flaps

How is this handled on a Stylus for scale ships?   Cal PosthumaLSF VVPersonal Web Pagehttp://www.altelco.net/~calplsf/index.htmlHome of Solenoid LED's    

[RCSE] Stylus TX RF Module

I am looking for a Stylus TX RF Module on channel 38 ??  New or ?? and crystal for Rec.   LeeLeeCox-Nevada, U.S.A. [EMAIL PROTECTED] Do you Yahoo!? Better first dates. More second dates. Yahoo! Personals

Re: [RCSE] Stylus- Pike Flap to Elevator Mix Quandry

Not possible. The horn is long for a reason...the stab sit a ways up on the fin. Tom How about drilling another hole in the elevator horn, closer to the pivot point? That would address all of the issues you discussed (force on servo, enough throw, etc). I realize this may not be easy, RCSE

Re: [RCSE] Stylus- Pike Flap to Elevator Mix Quandry

Jon Stone wrote: David, The spoiler suggestion is one good solution I have used before. Seems sometimes the radio just does not give you all the available throw. The caveat of this approach is to make sure there is some down elevator throw left over, so you are able to dork the plane in, if ne

Re: [RCSE] Stylus- Pike Flap to Elevator Mix Quandry

nt - Rocky Mountain Soaring Association Denver, CO http://www.rmsadenver.com -Original Message- From: David Zucker [mailto:[EMAIL PROTECTED] Sent: Friday, March 25, 2005 12:11 PM To: soaring@airage.com Subject: [RCSE] Stylus- Pike Flap to Elevator Mix Quandry Ok, This is the problem. As Gor

[RCSE] Stylus- Pike Flap to Elevator Mix Quandry

Ok, This is the problem. As Gordy earlier stated the Pike has a bellcrank with an unusually long arm at the pushrod side compared to the pivot side. The problem this has created, as well as putting more load on my 368 servo, is it doesn't allow for enough down mix to be generated at the end of

[RCSE] Stylus TX - price lowered

Price has lowered for Stylus TX radio,ch 59, with original box and manuals. Radio also includes the wall wart charger. $ 280 + 10 shipping. Sailplane program card #96803 $ 90 + 3.00 shipping/insurance Best Regards, Barry Kennedy Kennedy Composites www.kennedycomposites.com 1935 Highvalley

[RCSE] Stylus Picolario Question

Hi All Al Can I put the Picolario on channel 7 of an 8 channel receiver and mix it with the three way switch #8 #9 #10 Any help would be a life saver. Cheers Al     Albert E. Wedworth ( AL ) ERA  Capshaw  RealestateREALTOR- ASSOCIATECell  530-228-9445Fax 530-343-1715 BEGIN:VCARD VERSION:2.1

[RCSE] Stylus Trainer System unveiled

Easier than I thought. Nothing but the battery required for the trainer radio. No RF needed. I just loaded both radios with the same glide card and memory card setup. In the menu under trainer you set master on your radio, slave on the trainer radio. Also set the Spoiler-Stk setting to master, o

[RCSE] Stylus Trainer Mode

Does anyone have the documentation for the Stylus trainer mode? My 7 year old son is getting involved in flying. He flew my Pike Sup. pretty well last weekend and would would be nice to setup my back up to avoid the hand off or should I say overtaking of my transmitter. I already have the cable

[RCSE] Stylus Memory Card

Any recommendations on a good place to pick up a Stylus Memory Card at a reasonable price? Wes Gibson AMA 607029 LSF 7533 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 1/12/2005 RCSE-List facilities provided by M

[RCSE] Stylus help needed

Here's my problem, I'm setting up an Electric Me163 and want to use the rudder. I have been able to make the rudder servo work in it's proper place, the throttle I have working properly. It's the elevons I'm having fits with... can't make them work. I have the one servo connected as the RE and

RE: [RCSE] Stylus Help Needed

assign a value. Jon > -Original Message- > From: David Schat [mailto:[EMAIL PROTECTED] > Sent: Saturday, November 27, 2004 11:28 AM > To: [EMAIL PROTECTED] > Subject: [RCSE] Stylus Help Needed > > > For some reason I cannot change the exponential for my > r

RE: [RCSE] Stylus Help Needed

David Schat [mailto:[EMAIL PROTECTED] Sent: Saturday, November 27, 2004 12:28 PM To: [EMAIL PROTECTED] Subject: [RCSE] Stylus Help Needed For some reason I cannot change the exponential for my rudder. It is set at zero and won't budge. I want to add exponential for one of my E3D models fo

[RCSE] Stylus Help Needed

For some reason I cannot change the exponential for my rudder. It is set at zero and won't budge. I want to add exponential for one of my E3D models for hovering practice. TIA RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTE

[RCSE] Stylus for sale

Stylus TX, just back from Airtronics Service, near perfect condition.   Four rf modules, channels 12, 22, 28 & 37.   Original 700 mah battery, optional 1100 mah & dry cell carrier with Sanyo 700 mah, all nicads.   Glider card, Memory Card, Extra antenna Dsc cable, and standard charger.   All for

[RCSE] STYLUS Transmitter For Sale

Up for sale is my Stylus transmitter. I bought it from a fellow on RCU in January, 2001. Other than the usual scuffs on its bottom the radio is in excellent shape. I've upgraded the TX pack to 1650 mAh. The Stylus is a bit of a battery hog, and the stock 700 mAh pack would die after a couple hours

[RCSE] Stylus glider card

Does anyone out there have a working Stylus extended features glider card they would sell? How much? Buzz Averill RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sen

[RCSE] Stylus Question

When I fly my normal frequency, 50 Mhz - channel 09, I don't get any aileron-rudder coupling in reflex mode. If I change the frequency module to 72 Mhz - channel 40 and use a different RX I get aileron-rudder coupling in reflex mode. I'm using Airtronics RX and Futaba RX in 50 Mhz and Futaba RX i

[RCSE] Stylus for sale

I've got a stylus with glider card and 50 model memory card, on channel 35, - $300 Also, a Multiplex Alpha club, 100", 4 micro's in the wing, 2 standard in the fuse - immaculate, used perhaps 10 flights, also $300. Matt RCSE-List facilities provided by Model Airplane News. Send "subscribe" and

[RCSE] Stylus and Alpha Club for sale

I've got a stylus with glider card and 50 model memory card, on channel 35, - $300 Also, a Multiplex Alpha club, 100", 4 micro's in the wing, 2 standard in the fuse - immaculate, used perhaps 10 flights, also $300. Matt RCSE-List facilities provided by Model Airplane News. Send "subscribe" and

[RCSE] Stylus stuff

Flyingdogtwo, your email bounces. Call me at 405 692-1122 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

[RCSE] Stylus stuff

Paging George Voss -- flyingdogtwo flyingdogtwo's Profile: http://www.rcgroups.com/forums/member.php?action=getinfo&userid=15691 View this thread: http://www.rcgroups.com/forums/showthread.php?threadid=257791 RCSE-List f

Re: [RCSE] Stylus/Ham freqs

riginal Message - From: Doug McLaren To: Bill Malvey Cc: [EMAIL PROTECTED] Sent: 6/11/2004 8:54:37 AM Subject: Re: [RCSE] Stylus/Ham freqs On Fri, Jun 11, 2004 at 08:29:56AM -0700, Bill Malvey wrote: | On 6/11/04 8:26, "Brian Smith" <[EMAIL PROTECTED]> wrote:   | > I kno

Re: [RCSE] Stylus/Ham freqs

Yes, I realize you "can" scan all the frequencies, But was told at most contest sites where "they" scan the frequencies, they very seldom, if ever, scan the ham bands...Just what I was told..I have no first hand knowledge or experience along this line..This fact or fiction does not bother me...Bria

Re: [RCSE] Stylus/Ham freqs

On 6/11/04 8:54, "Doug McLaren" <[EMAIL PROTECTED]> wrote: > On Fri, Jun 11, 2004 at 08:29:56AM -0700, Bill Malvey wrote: > | On 6/11/04 8:26, "Brian Smith" <[EMAIL PROTECTED]> wrote: > > | > I know I have been advised against this, "but" I still want to try the 50 > | > mhz portion of the ham b

Re: [RCSE] Stylus/Ham freqs

On 6/11/04 8:46, "Brian Smith" <[EMAIL PROTECTED]> wrote: > Hi Bill... > I was told by several dealers that Airtronics was going out of the Ham > business, parts and service before long would be none existent, That I cannot comment on. May be true, may not be true. Only Airtronics knows. >and

Re: [RCSE] Stylus/Ham freqs

On Fri, Jun 11, 2004 at 08:29:56AM -0700, Bill Malvey wrote: | On 6/11/04 8:26, "Brian Smith" <[EMAIL PROTECTED]> wrote: | > I know I have been advised against this, "but" I still want to try the 50 | > mhz portion of the ham band for RC... | | Can't help you with the Stylus stuff, but I am curi

Re: [RCSE] Stylus/Ham freqs

Hi Bill... I was told by several dealers that Airtronics was going out of the Ham business, parts and service before long would be none existent, and at big events they scan the 72 mhz freqs for problems, but not the ham bands.. I was actually told by one dealer it was a waste of money...Brian Sm

Re: [RCSE] Stylus/Ham freqs

On 6/11/04 8:26, "Brian Smith" <[EMAIL PROTECTED]> wrote: > I know I have been advised against this, "but" I still want to try the 50 > mhz portion of the ham band for RC... Can't help you with the Stylus stuff, but I am curious about who and why you were advised against using 50 megs?

[RCSE] Stylus/Ham freqs

I know I have been advised against this, "but" I still want to try the 50 mhz portion of the ham band for RC... SO.. I'm looking for a 50 mhz module for a Stylus and a couple matching receivers...If you have anything along that line to sell, please contact me off the list..Thanks..Brian P. Smith A

Re: [RCSE] stylus help-stylus boy help!

CTED]>,RCSE <[EMAIL PROTECTED]> Subject: Re: [RCSE] stylus help-stylus boy help! Message-ID: <[EMAIL PROTECTED]> Barry, Dump the piccolario. You do not need it... 8-) At 09:54 PM 4/12/2004 -0400, Barry Andersen wrote: Second try-- let me try to simplify. I'm trying to use ch7 on a s

[RCSE] Stylus and ch 7 for tow release

I am trying to set up a scale Ka-8 with a Stylus radio and 8ch airtronics 92778 receiver. I am using ch8 for one of those dreaded Piccolarios, so have ch7 free for the tow release. Problem is that I can't figure out how to get ch7 operational. It is listed as being for spoilers. I'm puttin

Re: [RCSE] Stylus ground Range Check...answer :-)

Thanks for the quick response about Stylus ground range. It is for the new Sylus my son Chris is going to drive a new AVA in Phoenix with.   Thanks again everyone, Dave Corven. 

[RCSE] Stylus Wiring

While out flying last week I started experiencing radio problems. Wiht my two channel hand launch while flying smoothly, it would suddenly yaw to the right. I could correct it by adding some left stick. After three or four of these mild glitches I came home and narrowed it down to the transm

[RCSE] Stylus for sale

For sale: Stlyus FM PPM TX CH 30, 1 1/2 years old. New 1650 NiMH TX batteries. Glider card. Kavan power stick antenna and stock antenna. Standard Airtronics wall wart charger (note that it WILL NOT KEEP THE LARGER TX BATTERY CHARGED. YOU WILL NEED T

[RCSE] Stylus sold..To Gordon Jennings

On Friday, July 18, 2003, at 08:21 AM, Gordon Jennings wrote: At 07:24 AM 7/18/2003 -0600, you wrote: This is the last day for bidding...The high bid is 250... Going, going...gone to Gordon Jennings.. Thank you Gordon Phil/ Bozo 505 350 1304 $250! Gordon RCSE-List facilities provided by Model

[RCSE] Stylus Tx NiCD pack followup.

Well, I plugged my NiCD pack to my Schulze charger and wont discharge. Charging was okay. When I checked the voltage by putting the pack in my Stylus, it registered as 10.1 V, ie. fully charged. When plugged to my voltmeter, it read 0.8 V. So, guess I will have to jump the diode and void my mfg w

[RCSE] Stylus Tx NiCD pack mods

I use (AirT factory built) 1100 mah NiCads in my Stylus and have had no problems with the Sirius tester or charger. I get about 2 1/2 hours with the 1100s I don't use the Sirius tester very often (lazy) but the charger is a permanent fixture in the back end of my Blazer. I can get slightly mo

Re: [RCSE] Stylus Tx NiCD pack mods

- From: "Tom Broeski" <[EMAIL PROTECTED]> To: "D Hauch/ D Unruh" <[EMAIL PROTECTED]> Cc: "soaring" <[EMAIL PROTECTED]> Sent: Sunday, June 08, 2003 6:48 PM Subject: Re: [RCSE] Stylus Tx NiCD pack mods > > I have a Sirius tester and it won

Re: [RCSE] Stylus Tx NiCD pack mods

Hey Tom, > I have a Sirius tester and it won't work with my 1100mah > nicad TX packs, but it will do the 700's, what's up with that? > It will do my 1500mak RX packs though. > Thanks, > Dave > Dave, I have no idea. Even though I have used a lot of different chargers (and sell quite a few), I hav

Re: [RCSE] Stylus Question

At 05:28 PM 3/17/03 -0800, Albert Wedworth wrote: Hi Folks I got a question for ya all... On a Stylus Radio When I mix the Rudder with the switch # 1,2,3 And I'm in the mix menu When I give an amount in the 1st & 2nd switch position no amount in the center position. For some reason the mix

Re: [RCSE] Stylus question

Actually the thing with a Stylus that would catch everybody's attention is the loud beeping. If you don't move a stick for an extended period of time, the Stylus starts beeping loudly. I wish all transmitters would do this. Randy Bullard > If you turn in your Tx at a contest and left it on. That

[RCSE] Stylus FS on ebay

only 2 hours left   http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=34056&item=1923363591&rd=1  

[RCSE] Stylus TX only

Okay here's the breakdown   http://www.airtronics.net/2002_Page01.htm   Stylus radio: (629.95)    $350  Glider card: (199.95)    $75 Memory card: ($149)    $50 Rubberduck: ($25)  Free Shipping/ins: $9.65   This is a very nice radio!   Tom  

Re: [RCSE] stylus issue...

At 1:37 PM -0700 10/24/02, Paul Helmbold wrote: Hi all Anybody have any idea why my Stylus' elevator trim is controlling aileron trim (yes!) as well? Stylus boy, are you out there :o) Thanks in advance Paul Are you sure you don't have the Ailvation mix turned on? Or Taileron? Brian, who can

Re: [RCSE] Stylus problem part 2

: Sunday, September 29, 2002 6:29 PM Subject: [RCSE] Stylus problem part 2 A while back I posted about my Stylus having problems centering. Well, I talked to Airtronics and they knew about the problem. It seems when the lithium battery in the transmitter starts to go bad the lack

  1   2   >