Re: Cannot install freenet
Thank you, sorry for the misunderstanding. -Original Message- From: Dr. Arne Babenhauserheide Sent: Wednesday, October 28, 2020 3:10 PM To: Support Subject: Re: Cannot install freenet
[freenet-support] high pInstantReject and SUB_MAX_PING_TIME
Hi ! Is it a problem when pInstantReject is at 9,6% and the Rejection Reasons look like these: Preemptive Rejection Reasons 1960 >SUB_MAX_PING_TIME 417>MAX_PING_TIME 370Output bandwidth liability: fairness between peers 8 >MAX_PEER_QUEUE_TIME Local Preemptive Rejection Reasons 291>SUB_MAX_PING_TIME 130Output bandwidth liability: fairness between peers 55 >MAX_PING_TIME Im not sure, but the pInstantReject value is probably far too high (9,6%) and the first Reject Reason (SUB_MAX_PING_TIME) is also not typical. My Bandwidth is set to: Input = 800 KiB/s Output= 80.0 KiB/s Freenet 0.7.5 Build #1356 build01356 Freenet-ext Build #26 r23771 any ideas? thank you -Mike ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] Store Type: RAM or salt-hash ?
>> Somehow Robert got his client cache disabled. Please could some people check that their client cache is set to salted-hash (not ram), and is of a reasonable size? You need to check the core settings page in advanced mode. The wizard is supposed to set this up but it is possible there is a bug. > hi, my Client Cashe was also set to RAM / 10MiB, I changed it to Salt-hash. But I accidentally found Store Type section in the Core Settings Page and it says: "Datastore type. Currently this can be salt-hash (this is the default, stores data on disk with a lossy hashtable and a Bloom filter), bdb-index (old store format, not recommended), or ram (FOR TESTING ONLY, keep the index and the data in memory, not on disk). Only use ram if you know what you are doing and have enough RAM to store all your data (and note it will not be saved on shutdown)! ..." my Store Type was set to RAM, I never played with this setting, it was set default to RAM. Should I change it to salt-hash ? thanks - mike ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] login to freenet
Hi I recently discovered freenet, downloaded it and browsed. I closed my firefox browser which I have dedicated to freenet as instructed but when I open my browser it seems i have to go through the whole download performance all over again. Can you tell me how i can simply load freenet just like any other webpage, I have signed up and i do have a login id etc. your help is appreciated. Michael Sanders ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] install/uninstall problems
Hi there, I installed your programme which seemed all right but it is inaccessible - not on the desk top, not through Windows Start button and not through Start/run. When I try to uninstall it does not appear in the uninstall list and there seems to be no uninstall programme in programmes/freenet How do I get rid of it so that I can get it back with the icons? Yours Mike___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Piracy will not be tolerated
Sorry, I was just trying to point out that some consider any mention of sharing copyrighted material, however fleeting, as proof positive that the whole purpose of the development of a technology is to "steal" their "intellectual property" . Personally I think the whole notion of copyright has gotten a little out of hand recently. I just was suggesting people should try to edit themselves on a public email list and try to avoid possible legal issues. Maybe a total ban was a bit extreme, perhaps a warning would have sufficed, but I'm not really familiar with all of the legal implications. Have a good day urza9...@gmail.com wrote: > Hah, I don't really need a welcome, I've been here my whole life :) > > And he wasn't using the email list to discuss illegal activities, he > was using the email list to get support for Freenet - exactly what it > is here for. > > On Sat, Nov 7, 2009 at 6:12 PM, Mike Cook wrote: > >> Welcome to the USA. You need to be very careful these days in regard to >> any discussion of file sharing. There are many legal pitfalls and many >> with deep pockets just looking for an opportunity to sue. Like it or not >> email lists are not a place to discuss illegal activities whether you >> agree with the law or not. >> >> urza9...@gmail.com wrote: >> >>> Wow, that's a bit...extreme. I mean there's a _huge_ difference >>> between refusing to give someone support, which may or may not be >>> legal, and completely banning them. I mean just because _you_ can't >>> help him doesn't mean nobody else on this list can. Way to alienate a >>> rather significant percentage of the user base. >>> >>> ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Piracy will not be tolerated
Welcome to the USA. You need to be very careful these days in regard to any discussion of file sharing. There are many legal pitfalls and many with deep pockets just looking for an opportunity to sue. Like it or not email lists are not a place to discuss illegal activities whether you agree with the law or not. urza9...@gmail.com wrote: > Wow, that's a bit...extreme. I mean there's a _huge_ difference > between refusing to give someone support, which may or may not be > legal, and completely banning them. I mean just because _you_ can't > help him doesn't mean nobody else on this list can. Way to alienate a > rather significant percentage of the user base. > > > On Sat, Nov 7, 2009 at 6:56 AM, Matthew Toseland > wrote: > >> On Sunday 18 October 2009 11:24:08 Toni Bergman wrote: >> ... >> >>> I present you with my graph. I'm downloading music from freenet. >>> >> Thanks for your detailed bug report. However, based on your graph, which >> contains clear evidence of copyright infringement (there *is* legal music on >> Freenet, but the Thaw instance shown includes stuff that is almost certainly >> not legal), you have just earned a permanent ban from the support list. >> Because of this I will not be able to act on any of the issues you >> mentioned, as this would be equivalent to providing tech support to known >> pirates. Please go away and don't come back. >> >> Sorry folks, but PIRACY WILL NOT BE TOLERATED. >> >> This policy is the result of MGM vs Grokster, where the Supreme Court of the >> United States of America found the defendant guilty because amongst other >> reasons, it provided technical support to people it knew to be engaged in >> copyright infringement. The EFF's peer to peer advice is not to provide tech >> support at all, but IMHO this is more or less impossible for an open source >> project. See here: >> http://www.eff.org/wp/iaal-what-peer-peer-developers-need-know-about-copyright-law >> >> Freenet Project Inc is incorporated in the USA under Californian law. I have >> a responsibility not to get them into legal trouble, although I am based in >> England. >> >> ___ >> Support mailing list >> Support@freenetproject.org >> http://news.gmane.org/gmane.network.freenet.support >> Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support >> Or mailto:support-requ...@freenetproject.org?subject=unsubscribe >> >> > > > > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] uninstall comment page error - suggestions
Here are my suggestions - not sure if they went through: Have some easy way to pull over BitTorrent content (for example, after downloading something with a BitTorrent client, use Freenet to open that file/dir using an Import option, which would start the Freenet client uploading it. If this is made easy and obvious, people could easily start moving content over, and there would be more stuff on Freenet. ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] uninstall comment page error - suggestions
Here are my suggestions - not sure if they went through: Have some easy way to pull over BitTorrent content (for example, after downloading something with a BitTorrent client, use Freenet to open that file/dir using an Import option, which would start the Freenet client uploading it. If this is made easy and obvious, people could easily start moving content over, and there would be more stuff on Freenet.
[freenet-support] (no subject)
2 of your peers are having severe problems (not acknowledging packets even after 10 minutes). This is probably due to a bug in the code. Please report it to us at the bug tracker at https://bugs.freenetproject.org/ or at support at freenetproject.org. Please include this message and what version of the node you are running. The affected peers (you may not want to include this in your bug report if they are darknet peers) are: My Node * Freenet 0.7 Build #1178 r23592M * Freenet-ext Build #24 r23199
[freenet-support] (no subject)
2 of your peers are having severe problems (not acknowledging packets even after 10 minutes). This is probably due to a bug in the code. Please report it to us at the bug tracker at https://bugs.freenetproject.org/ or at [EMAIL PROTECTED] Please include this message and what version of the node you are running. The affected peers (you may not want to include this in your bug report if they are darknet peers) are: My Node * Freenet 0.7 Build #1178 r23592M * Freenet-ext Build #24 r23199 ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
Re: [freenet-support] OutOfMemoryError
Hrm. To answer myself, I changed the value in FLaunch.ini for JavaMem from default to 192M. This program is currently using up 160MB of RAM...is that normal? Mike Z wrote: I'm trying to run my 5088 node, and keep getting this on startup (it never gets past starting...) I'm running XP. Any help? Thanks. Aug 4, 2004 12:26:00 AM (freenet.node.Main, main, NORMAL): Loaded bucket factory Caught java.lang.OutOfMemoryError running or seeding node java.lang.OutOfMemoryError Aug 4, 2004 12:26:13 AM (freenet.node.Main, main, ERROR): Caught java.lang.OutOfMemoryError running or seeding node java.lang.OutOfMemoryError Caught, in Main: java.lang.OutOfMemoryError java.lang.OutOfMemoryError ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED] ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
[freenet-support] OutOfMemoryError
I'm trying to run my 5088 node, and keep getting this on startup (it never gets past starting...) I'm running XP. Any help? Thanks. Aug 4, 2004 12:26:00 AM (freenet.node.Main, main, NORMAL): Loaded bucket factory Caught java.lang.OutOfMemoryError running or seeding node java.lang.OutOfMemoryError Aug 4, 2004 12:26:13 AM (freenet.node.Main, main, ERROR): Caught java.lang.OutOfMemoryError running or seeding node java.lang.OutOfMemoryError Caught, in Main: java.lang.OutOfMemoryError java.lang.OutOfMemoryError ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
[freenet-support] CPU pegging at 100% since 5085
Since upgrading to 5085 (and 5086), Freenet is using up a huge amount of processor time, to the point where the web interface no longer even responds. This doesn't happen every start, but once it occurs, freenet has to be killed and restarted. It sometimes happens when first started, sometimes after running for a while. The machine is running Win XP, with a 3.2Ghz P4 with HT, and 1GB of RAM. Both processor threads are pegged at full utilization, and freenet is holding steady at about 150MB of RAM used. Any help would be appreciated. Uptime: 0 days, 1 hour, 51 minutes Current routingTime: 0ms. Pooled threads running jobs: 272 (54.4%) [Rejecting incoming connections and requests!] Pooled threads which are idle: 10 It's normal for the node to sometimes reject connections or requests for a limited period. If you're seeing rejections continuously the node is overloaded or something is wrong (i.e. a bug). Current estimated load for rate limiting: 452.2%. Load due to thread limit = 54.4% Load due to routingTime = 10% = 100ms / 1000ms <= overloadLow (80%) Load due to messageSendTimeRequest = 452.2% = 4522ms / 1000ms > overloadLow (80%) Load due to output bandwidth limiting = 14.6% because outputBytes(215153) <= limit (1474560 ) = outLimitCutoff (2) * outputBandwidthLimit (12288) * 60 Load due to expected inbound transfers: 2.4% because: 404.76961565213924 req/hr * 0.030716723549488085 (pTransfer) * 377327.0 bytes = 4691380 bytes/hr expected from current requests, but maxInputBytes/minute = 2949120 (output limit assumed smaller than input capacity) * 60 * 1.1 = 194641920 bytes/hr target Current estimated load for QueryRejecting: 55.4%. ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
Re: [freenet-support] Freenet 0.5.0.4
frost, and freenews those 2 addons. kill my win2k. not sure why, but i can not use them now. - Original Message - From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, November 02, 2002 11:12 AM Subject: Re: [freenet-support] Freenet 0.5.0.4 ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] i need help with freeweb
is there anyone here who currently uses the freeweb plugin? I need help with it. I can upload the HTML files, but the pictures are not uploading :( not sure why, the links and pics are in the same dir, and im not sure what im doing wrong. any ideas is helpful.:() ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] Freenet 0.5.0.4
GAPING PLUGIN LEAK!1 like omg!!! since build 527, i can not use the plugins.. they drain my resources to fast it kills my win2k. i have a gig of Ram on this thing. but it drains so fast. it does not give me a chance to opt out. i went back to build 525 and this leak is not there. can this be fixed? - Original Message - From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, October 31, 2002 5:52 PM Subject: [freenet-support] Freenet 0.5.0.4 ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] .5.0.3?? why is is still build 527?
this makes no sense. ?? or did i install the latest release? ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] It's installed...now what?
thats funny??? I came here thinking it was like a internet within the internet??? i never assumed that it was a P2P app??? where do people get this stuff from? I love Frost :P but still to use frost to locate files is also inaccurate, you can request them, and others will post them, but to say this is a P2P app, is insaine. and limiting freenet :P to tell you the truth. i have no idea what this realm is... but it is WAY COOL - Original Message - From: "Greg Wooledge" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 30, 2002 4:26 PM Subject: Re: [freenet-support] It's installed...now what? ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] DNF's and system time? Or is 5.0.3. just a winner?
Can we add to the bookmarks? on the main page? I would not mind having that.:P ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] Freenet 0.5.0.3
can we use the same web installer? or do ne need to always download the newer one? - Original Message - From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, October 30, 2002 1:34 PM Subject: [freenet-support] Freenet 0.5.0.3 ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] build 525 kicks ass
525 was pretty good, but 527 is actually better. I see that now, and it has seemed to lighten my load. yester day i was running at 100% till about 2 am thismorning. when i noticed thing smoothing out. now things are improving. nothing has crashed. so im happy. and things continue to improve... :) soon things will be fast... Provided freenet does not get /.'ed again.. lol - Original Message - From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 30, 2002 10:27 AM Subject: Re: [freenet-support] build 525 kicks ass ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] errr.. i mean Build 527 broke my Frost.
on the 525 build port on fproxy was not getting me anywhere. I changed the port to 8081 and things worked. I updated to freenet build 527 and suddenly my other plugins quit working. my frost, my news groups for freenet, and a few other items i had. just a note, i rebooted. Disabled a buncha win2k services, and restarted freenet, and found that this has solved the problem. :P im working, and things are actually running faster now .. lol so, i dont think freenet was the actual problem. BTW!!! im now ADDICTED TO FREENET!!! YOU BASTARDS!!! LOOK WHAT YOU DID TO ME!!! i will never go back to the OTHER internet again... except /. :P - Original Message - From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 30, 2002 6:53 AM Subject: Re: [freenet-support] errr.. i mean Build 527 broke my Frost. ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Is it me, or is there relief in freenet?
today i logged back in, and apparantly freenet is starting to run smoother today. pretty cool. as messages are going through, and im able to get around a bit better... still really slow, but it is getting better... :) ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] errr.. i mean Build 527 broke my Frost.
after updating the freenet and changing my port back to I get the following error in frost.: java.net.connectexception:connection refused connect AAHHH!!! now, how can i fix this? do i need to totally reinstall .5 ? - Original Message - From: "Mike" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 29, 2002 7:44 PM Subject: Re: [freenet-support] timeouts from LAN > build 527 broke my frosty... AAHH!!! > > > > > ___ > support mailing list > [EMAIL PROTECTED] > http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] timeouts from LAN
build 527 broke my frosty... AAHH!!! ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] results w/527
i just updated to 527, and now im at 89-133% this time , it is dragging my system to a crawl :P bleh... the fun starts. - Original Message - From: "Doug Bostrom" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 29, 2002 5:19 PM Subject: [freenet-support] results w/527 > Pipe still saturates. I cut maxthreads to 40, then 20. Connections stayed at 45, pooled jobs at 98, java > processes somewhere over 100. Load at 90+. > > Bandwidth adjustments via freenet.conf have zero effect. > > OTH, I don't see in the support thread that others are having the same issue with saturation of the actual net > connection that I am. Is it possible I'm being messed w/ by my provider, Earthlink? They have essentially no > stated limits on what I'm allowed to do with this connection as long as it's not openly illegal. > > Any advice would be much appreciated. At this point I cannot run a node and maintain a connection to the net for > any other purpose, and I sort of suspect the node is not working worth a s**t this way either. > > -- > "Democracies die behind closed doors." > - Judge Damon Keith > > > > ___ > support mailing list > [EMAIL PROTECTED] > http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] KLEZ Virus Spam Worm
I ran a scan on my PC with 4 different scanners., i checked my out box, for unusual e-mail attachments. and im clean. if this be the case, how did this happen??? good ol kletz was i forged? or did i get the bug? i may neverknow. - Original Message - From: "root" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 10:55 PM Subject: [freenet-support] KLEZ Virus Spam Worm > Your computer is infected with the KLEZ worm. Please see > http://securityresponse.symantec.com/avcenter/venc/data/w32.klez.e@;mm.html for more information. echo This is an automatically generated message. > > ___ > support mailing list > [EMAIL PROTECTED] > http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] man, traffic picked up tonight.
yeah, i have tond of space and bandwidth to play with :P i was just amazed at who and how many peeps are hitting me. :P - Original Message - From: "William_dw -- Sqlcoders" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 9:18 PM Subject: RE: [freenet-support] man, traffic picked up tonight. > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:support-admin@;freenetproject.org]On Behalf Of Mike > > Sent: 28 October 2002 21:56 > > To: [EMAIL PROTECTED] > > Subject: [freenet-support] man, traffic picked up tonight. > > > > > > I was running from 1% usage and 35% > > > > now, for the last hour i have 100% > > > > here are my stats thus far. > > > > a.. Current routingTime: 4772ms. > > > > b.. Active pooled jobs: 22264 (188.57143%) [Rejecting incoming > > connections and requests!] > > > > c.. Available threads: 289It's normal for the node to sometimes reject > > connections or requestsfor a limited period. If you're seeing rejections > > continuously the node is overloaded or something is wrong (i.e. a bug). > > d.. Current estimated load: 100.0%. > > > > and at this point im very active on my node. :P > > > > guess thats what i get for sharing so much resources.. lol > > LOL, you can still get statistics? > > =>C:\DOCUME~1\WILLIA~1>telnet localhost > =>Connecting To localhost...Could not open connection to the host, on port > . > =>No connection could be made because the target machine actively refused > it. > > Bah humbug. > > > ___ > support mailing list > [EMAIL PROTECTED] > http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] OMG!!!
tonight i switched from IE to mozilla, and immedeatly my usage went from 100 to 50% still high.. but IE ?? sucking up bandwidth? how lame.. :P ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] RE: can't get out
when i get that, i change the 15 to 50 or 100 and i usually get through :) - Original Message - From: Scott Bonds To: [EMAIL PROTECTED] Sent: Monday, October 28, 2002 8:56 PM Subject: [freenet-support] RE: can't get out After many, many retries, I can now get out. later, Scott Bonds [EMAIL PROTECTED] -Original Message-From: Scott Bonds Sent: Monday, October 28, 2002 11:37 AMTo: '[EMAIL PROTECTED]'Subject: can't get out I just get these kind of error messages. Ive tried reseeding with the default nodes, the nodes off the Freenet website, etc. No dice. Network Error Couldn't retrieve key: Hops To Live: 15Error: Route not Found Attempts were made to contact 4 nodes. · 2 were totally unreachable. · 0 restarted. · 2 cleanly rejected. Route Not Found messages mean that your node, or the rest of the network, didn't find the data or enough nodes to send the request to. You should retry, with the same Hops-To-Live; if it persists, there may be a problem (check that your internet connection is working). Try reseeding your node, and if that doesn't work, contact [EMAIL PROTECTED] Change Hops To Live later, Scott Bonds [EMAIL PROTECTED]
[freenet-support] man, traffic picked up tonight.
I was running from 1% usage and 35% now, for the last hour i have 100% here are my stats thus far. a.. Current routingTime: 4772ms. b.. Active pooled jobs: 22264 (188.57143%) [Rejecting incoming connections and requests!] c.. Available threads: 289It's normal for the node to sometimes reject connections or requestsfor a limited period. If you're seeing rejections continuously the node is overloaded or something is wrong (i.e. a bug). d.. Current estimated load: 100.0%. and at this point im very active on my node. :P guess thats what i get for sharing so much resources.. lol i might increase the bandwith later to allow even more traffic on my node. :P BTW, earlier today i was on a site that listed freenet sites. what was that url again ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] Problems with freenet
yeah... castrated.. lol - Original Message - From: "Greg Wooledge" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 4:34 PM Subject: Re: [freenet-support] Problems with freenet ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] Load
mine has been up to 89% at times. i think this is due to the /. effect at slashdot.org once all the influx of new users .. uuhh.. like me.. it should go back down. if the 100 % stays too long, just restart the freenet :P - Original Message - From: "Doug Bostrom" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 3:38 PM Subject: [freenet-support] Load > Persistent node (525) here showing 100% load (106% and change right now) most of the time. Is this something to > worry about? And if it is, is there any information you'd like to see? > > -- > "Democracies die behind closed doors." > - Judge Damon Keith > > > > ___ > support mailing list > [EMAIL PROTECTED] > http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] Problems with freenet
actually, it comes to me as attachments. anf the attachments are 1 txt and 1 DAT most likely because of your signed e-mails :P this one came normal. :P - Original Message - From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 12:54 PM Subject: Re: [freenet-support] Problems with freenet On Mon, Oct 28, 2002 at 12:45:42PM -0800, Mike wrote: > sorry, matthew, but your replies come to me as garbeled attachments. my > server stips attachments, as a virus security precaution. can you re reply > to this thread. thanks. Your server is fscked. My client does not send HTML attachments, it uses the standard for sending signed mail. -- Matthew Toseland [EMAIL PROTECTED] [EMAIL PROTECTED] Freenet/Coldstore open source hacker. Employed full time by Freenet Project Inc. from 11/9/02 to 11/11/02. http://freenetproject.org/ ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] How to get PHP to work with Fproxy?
so php scripting will not work for me then ?? WWHAHAHHH :P guess that means i am gonna have to just make static pages here... lol - Original Message - From: "Josh Steiner" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 12:46 PM Subject: Re: [freenet-support] How to get PHP to work with Fproxy? > to rephrase... in freenet there is *no* server... php/jsp/et all are all > *server side* scripts :) > > Matthew Toseland wrote: > > >On Mon, Oct 28, 2002 at 12:25:45PM -0800, Mike wrote: > > > > > >>i installed freeweb, ran the site update, and it want finr, then i went to view my site, and it gave a file list of all my php files, i clicked on my default index.php file, and it tried to download the file. > >> > >> > >Um, freenet does not and never has supported PHP, ASP, javascript or any > >other "dynamic content". > > > > > >>I want it to View not download. what can i do t oget php enabled on the freenet proxy ? > >> > >> > > > > > > > > > -- > ___ > Josh .. Yoshi .. Joschi .. http://mp3.com/vitriolix > > > > ___ > support mailing list > [EMAIL PROTECTED] > http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] Problems with freenet
sorry, matthew, but your replies come to me as garbeled attachments. my server stips attachments, as a virus security precaution. can you re reply to this thread. thanks. - Original Message - From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 12:37 PM Subject: Re: [freenet-support] Problems with freenet ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] Problems with freenet
boom, try this... right click on the rabbit, and select configure and select the Fproxy, for giggles. set the port to 8081 to test the connectivity. I was using the default port and i had the same issue. changed it to 8081 (it is the default for the 0.4 release) and now i get many sites. :P laters. - Original Message - From: "Boom" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 12:33 PM Subject: [freenet-support] Problems with freenet -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi there :) Nice software.. I totally think this is an excellent idea for protecting peoples freedom of speech and expression, if too radical for many people from the US to deal with ;) At any rate, I am running as a 24/7 node with port 2 as my fproxy port. I can't connect to *any* sites other than the main portal linked to on the front page. Even when setting the hops as high as 50 or so, i get absolutely no response from any sites! I definitely have no local network issues, no blocked ports or conflicting apps... Grrr.. Any ideas? Maybe it's because I'm in the UK? There can't be too many nodes locally yet.. Thanks in advance David -BEGIN PGP SIGNATURE- Version: PGP 8.0 (Build 294) Beta iQA/AwUBPb2fKyOn+ry/opL7EQJY+ACfUsyjqaLPG8r/tMR0BXpwMnihiikAnjDk kwGDmecbqrL+75RPaJn6sMKp =AqM7 -END PGP SIGNATURE- ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] How to get PHP to work with Fproxy?
i installed freeweb, ran the site update, and it want finr, then i went to view my site, and it gave a file list of all my php files, i clicked on my default index.php file, and it tried to download the file. I want it to View not download. what can i do t oget php enabled on the freenet proxy ?
[freenet-support] My apologies for the repeats.
All I can say about hotmail is you get what you pay for... _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Chat with friends online, try MSN Messenger: http://messenger.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Chat with friends online, try MSN Messenger: http://messenger.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Chat with friends online, try MSN Messenger: http://messenger.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Chat with friends online, try MSN Messenger: http://messenger.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] Report on pre1_0.4
It appears to install fine. Running freenet still doesn't work, the chord.wav no longer happens at start. No log file is created, no signs of a datastore or any ports being opened to listen from. I also noticed that config option in the systray doesn't work. "Unable to launch configurator for freenet" _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] NodeConfig, missing .dll error
>Could everyone test the two current installers available right now: >http://hawk.freenetproject.org/~oierw/freenet-0.5_pre1_0.3.exe >http://hawk.freenetproject.org/~oierw/freenet-0.5_pre1_0.2.exe 0.3 required the dll to run nodeconfig 0.2 installs fine but freenet doesn't appear to work, I get a chord.wav on start and it doesn't open ports for listening. There is also no log file for errors as well. _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] NodeConfig, missing .dll error
The most recent(and perhaps the one before that) freenet-webintall.exe comes with a nodeconfig that requires MFC70.DLL which I don't have. I'm running win98/IE5.5sp2(not default browser though). I was going to just download the dll but I found that two sites that had it also had differant file sizes so I didn't trust either of them. I also only have one line in my freenet.ini "storeCacheSize=0" so I didn't want to run my node. If this is going to be required, it maybe a good idea to have a link where to get this dll from a safe site. _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ___ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support
[freenet-support] two questions
what soes PANIC! just recreated heisenbug! mean and usally i have to uninstall freenet to update my snapshot so how do i keep my node the same if i have to uninstall it for each new build?
[freenet-support] inbound connections
I run windows xp and build468, I have norton internet security and black ice defender. I have been running a node off and on for about 8 months and my node no matter what i do my node has never allowed incomming requests. Ihave tried to configure the firewalls but it doesnt help. I have even tried running my node without the firewalls or the firewalls disabled (that includes the firewall that comes with xp) and i have the freenet folder set to share but still no luck. People have told me before that I have to export the ports that freenet uses to the firewall, but i have no idea how to do that and and as far as I can tell everything is set up properly. My node doesnt seem to have a problem contacting others, it just wont allow incomming. I also have nodeinfo and nodestatus enabled. any help would be greatly appreciated!
[freenet-support] You received an e-card from Mike.
Hi there, There's an e-card waiting for you.Just click the link below to pick up your personal message: View Card This e-card will never expire. If you are unable to see the greeting you received by clicking on the View Card link, copy and paste the full URL below into your browser:http://www.kangaroocards.net/engine/cardviewer.asp?s=1&c=258&re=sbmqiAofuqspgju%2Fom&r=Ef%21wfsmjf%7Bfs%22&we=157&me=Ipj%2D%21ipf%21jt%21ifu%21fs%21nff%40%21%7CCfo%21kjk%21eju%21tpnt%2D%21ib%2D%21%7Cib%2D%21ib%2F%2F%2F%21%7C%7CUpu%21ejotebh%2D%21ebo%21nbbl%21%7Cjl%21kf%21xffs%21jo%22%21%7CNjlf%21%7C%7C&v=Njlf%21&ve=njlf%60i%6023456Aipunbjm%2Fdpn&vc=&cr=2
[freenet-support] help
i tried to update snapshot today and after i did freenet wouldnt work at all, so i reinstalled a fresh copy and now all i can get is the gateway page, it says it cant make it off my node, so what do i do and how do i get more seednode refs, the download refs on the config window doesnt seem to work. THANK YOU!
[freenet-support] (no subject)
find something that works then advertise stupid!!!
[freenet-support] (no subject)
I downloaded the windows version of freenet, installed it, doubleclicked on the freenet icon it said error contact you guys. any suggestions on how to get this up and running?
