Tried out route planner for bikes and saw in my region that the planner
takes the wrong side of the road.
https://graphhopper.com/maps/?point=50.788276%2C3.133957point=Kortrijkstraat%2C%208930%2C%20Menin%2C%20Belgiumvehicle=bikeelevation=truelayer=Lyrk
The roundabout I will correct it to
This roundabout was already in the sytem with all the details separated
footway, cycle way, highway.
hope better link. (How taken a link of josm screen ? permalink?)
https://graphhopper.com/maps/?point=50.788276%2C3.133957point=50.794787%2C3.137348vehicle=bikeelevation=truelayer=Lyrk
Marc
I think the correct key is :
http://wiki.openstreetmap.org/wiki/Key:oneway:bicycle
Since it is standard to allow bicycles to use both direction, also in a
one-way street it's allowed unless specifically restricted.
Glenn
On 11-11-14 11:41, Jakka wrote:
Tried out route planner for bikes
Sorry but oneway=yes just means you can only drive in the direction of
the way. It has nothing to do with going opposite.
I quote: The oneway tag is used to indicate the access restriction on
highways and other linear features as appropriate. So it's an access
restriction.
On highway=cycleway
Gilbert,
Dit is geen discussie over de wegcode maar over de betekenis van tags en
het resultaat ervan. Het intereseert me zelfs niet wat de wegcode
ervan vindt in het kader van deze materie.
Ik heb het dus niet over de wegcode maar over de betekenis van de keys.
Laat dit duidelijk zijn dat
This is actually quite interesting road to dive in deeper. I notice a
few problems with this roundabout.
https://www.openstreetmap.org/changeset/26707718#map=19/50.78871/3.13953
There is no connection between Moeskroenstraat en the cycleway. This
would pop up when Validating changes before
Glenn,
ik zie nergens een cycleway op http://osm.org/go/0EgP1kjK2?m=way=109638123
? (ook n iet in JOSM)
2014-11-11 14:52 GMT+01:00 Glenn Plas gl...@byte-consult.be:
Gilbert,
Dit is geen discussie over de wegcode maar over de betekenis van tags en
het resultaat ervan. Het intereseert me
On 2014-11-11 16:49, Gilbert Hersschens wrote :
@André: pls read again (you provided the link yourself): Some tags
(such as junction
http://wiki.openstreetmap.org/wiki/Key:junction=roundabout
http://wiki.openstreetmap.org/wiki/Tag:junction%3Droundabout, highway
I noticed my misinterpretation myself indeed - after the facts.
My bad. I wasn't claiming that oneway=yes doesn't apply to cyclists, I
was saying that the 'wegcode' actually allows bicycles to use the
cycleway in the opposite direction. - and that was totally wrong after
deeper researching.
So
2 problems:
You're not checking the roundabout I think we were talking about.
https://www.openstreetmap.org/#map=17/50.78823/3.14081
Check in JOSM for the latest data. The tiles do not get regenerated at
the changeset rate. It will take some time to proliferate.
That's exactly why we talking
Hi,
highway=cycleway is distinct from another highway=* and uses its own
distinct oneway=*
oneway bicycle exceptions in the same highway are described here
http://wiki.openstreetmap.org/wiki/Oneway#Sub_keys_.2F_exceptions.
The mapping of cycleway=* alongside a oneway highway=* is described here
On 2014-11-11 17:57, Glenn Plas wrote :
...
That's exactly why we talking next to eachother. Jakka worked on it, I
did a few fixes + validation. Then I fixed my own mistakes in fixing
Yes, that reminds me
- look at that mistake
- I don't see any
- that's because I corrected it
Yes,
Jakka,
please do not use ways to represent lanes. The Moeskroenstraat coming from
the east (before the roundabout) should not be split until you see the
white divider at the last moment. Before that it should be tagged as
lanes=2, turn:lanes=none|slight_right or through|slight_right
I have been
On Tue, Nov 11, 2014 at 2:40 PM, André Pirard a.pirard.pa...@gmail.com
wrote:
Wonderful router you're showing. Does it use often updated data?
I thought the routing data was updated daily, the map is updated more
frequent. Remember that this router does not honor turn restrictions at
this
Andre,
In case you look for more routers, try this one. It's very fast, I
consider it a light weight one.
There still work to be done on it, not perfect but worth diving into it.
http://www.routino.org
Glenn
On 11-11-14 19:16, Marc Gemis wrote:
On Tue, Nov 11, 2014 at 2:40 PM, André
OSMGeoWeek is building steam. Join us. 14 events and counting (
http://osmgeoweek.org/events/) planned during the week November 15-22,
celebrating geography, education, and OpenStreetMap. We'll be launching
TeachOSM.
The amazing cartographers at National Geographic have invited the free and
open
On Tue, Nov 11, 2014 at 11:04 AM, Michael Kugelmann michaelk_...@gmx.de
wrote:
On 11.11.2014 00:16, Eugene Alvin Villar wrote:
But I would rather see New York as the SotM 2015 and Venice as the SotM
EU 2015. So I think that the OSMF should cooperate with OSM US and declare
the winning New
Here's one more for you:
Learning QGIS and OpenStreetMap - Three short talks and plenty of QA
Wednesday, 19 November 2014 from 7:00 PM to 9:00 PM (EST)
Learning Labs
481 Queen St W
Classroom B
Toronto, ON M5V 2A9
Canada
___
talk mailing list
Hi,
On 11/10/2014 08:04 PM, Michael Kugelmann wrote:
as I didn't read anything about it: was there an announcement about the
location for the 2015 SOTM at the 2014 SOTM Buenos Aires?
IIRC there was a statement about the intention to announce the 2015
locataion there...
The only things
I think the Sotm latinoamérica 2016 will be in Bolivia, not Ecuador.
El 11/11/2014 16:51, Frederik Ramm frede...@remote.org escribió:
Hi,
On 11/10/2014 08:04 PM, Michael Kugelmann wrote:
as I didn't read anything about it: was there an announcement about the
location for the 2015 SOTM at
Hi,
On 11/11/2014 08:59 PM, Rafael Avila Coya wrote:
I think the Sotm latinoamérica 2016 will be in Bolivia, not Ecuador.
Of course! My bad, sorry. Still a bit lagged from the 13 hour flight home ;)
Bye
Frederik
--
Frederik Ramm ## eMail frede...@remote.org ## N49°00'09 E008°23'33
On Tue, Nov 11, 2014 at 10:29 AM, Richard Fairhurst rich...@systemed.net
wrote:
Hope these are helpful, and let me know of any further suggestions.
Richard,
Thanks for doing this. The selection of color and lines make for quick
addition.
Suggestion - set the tile background to transparent so
On 11/11/2014 10:29 AM, Richard Fairhurst wrote:
I've created a set of tiles from US Forest Service road data for the
155 US National Forests.
It's worth noting that a green area denotes a US National Forest, which
does not imply it's got trees, which is necessary for an OSM forest.
Thanks
On 11/11/2014 20:57, Clifford Snow wrote:
Suggestion - set the tile background to transparent so we can see
underlying image in JOSM.
I can certainly have a look at doing that. Do you/anyone know whether
transparent tiles would still be usable in iD?
cheers
Richard
Andy Mabbett a...@pigsonthewing.org.uk wrote:
On 27 August 2014 17:47, Edward Betts edw...@4angle.com wrote:
I'd like to annotate these 70k objects in OSM with a Wikidata tag
automatically.
Can we now move forward with this?
I'll generate a fresh list of Wikidata items.
--
Edward.
Hi,
on talk-latm is a discussion ongoing to have a SotM-LA in 2015 as well. ;-)
--
## Manfred Reiter - mobile - please excuse typos and brevity
Am 11.11.2014 15:02 schrieb Frederik Ramm frede...@remote.org:
Hi,
On 11/11/2014 08:59 PM, Rafael Avila Coya wrote:
I think the Sotm
Although it is situated in New York City, the//land occupied by the
United Nations Headquarters and the spaces of buildings that it rents
are under the sole administration of the United Nations. They are
technically extraterritorial through a treaty agreement with the U.S.
government (1).
Am 9. November 2014 11:14 schrieb Manuel Reimer manuel.s...@nurfuerspam.de
:
Ich hätte mir sehr gewünscht, dass die Kollegen früher mit der Kommunity
gesprochen hätten.
Ja, das wäre besser gewesen.
+1
Aber auch jetzt kann man sich durchaus noch mit dem zu Grunde liegenden
Problem
Hallo.
Am 10.11.2014 um 22:27 schrieb Andreas Schmidt:
Als ich Uploaden wollte, fiel mir auf, dass ich gar keine Ortsangabe weiß.
Also habe ich im JOSM nach dem nächsten Ort geschaut, dessen Daten in
JOSM heruntergeladen und den Ortsnamen herauskopiert.
Hast du dabei vielleicht eine neue
Manfred A. Reiter wrote on 10.11.2014 01:32:
Am 8. November 2014 16:46 schrieb Andreas Neumann andr-neum...@gmx.net:
Zitat:
Das Ganze ist schwer zu verstehen, das weiß ich. Lass also die Einträge
bitte beide bestehen, es ist wirklich das Beste in diesem Fall eine
Adresse / Einrichtung eben
Hallo Holger,
Am 11. November 2014 15:32 schrieb Holger Jeromin mailgm...@katur.de:
Manfred A. Reiter wrote on 10.11.2014 01:32:
Am 8. November 2014 16:46 schrieb Andreas Neumann andr-neum...@gmx.net
:
Zitat:
Das Ganze ist schwer zu verstehen, das weiß ich. Lass also die Einträge
Nutzer DD1GJ http://www.openstreetmap.org/user/DD1GJ hat soeben den
von mir gelöschten Node in abgewandelter Form wieder hergestellt
http://www.openstreetmap.org/changeset/26704923
Nun ist ebusiness als Wert beim Office-Tag eingefügt worden. Da es in
der Wiki nicht definiert ist, werde ich dem
Manfred A. Reiter wrote on 11.11.2014 15:57:
Am 11. November 2014 15:32 schrieb Holger Jeromin mailgm...@katur.de:
Manfred A. Reiter wrote on 10.11.2014 01:32:
Am 8. November 2014 16:46 schrieb Andreas Neumann andr-neum...@gmx.net
Zitat:
Das Ganze ist schwer zu verstehen, das weiß ich. Lass
Ich wuerde gerne in diesem Kontext auf ein generelles Problem verweisen,
fuer das, sowei ich weiss OSM (noch) keine einfache Antwort hat:
meshing of databases.
Dieses Beispiel ist eines von vielen. Uach ich habe einige solche Sachen in
petto, wo ich noch nicht weiss, wie ich es machen soll. Sind
Am 11. November 2014 16:35 schrieb Holger Jeromin mailgm...@katur.de:
Manfred A. Reiter wrote on 11.11.2014 15:57:
[...]
Natürlich wäre es möglich oder sogar sinnvoll gewesen.
Ich wollte nur sagen, dass die emotionale Ebene bei reinen Textmails zu
einer unbekannten Person nur über mehr
Hi,
Frederik Ramm schrieb:
Bislang musste man solche Diskussionen immer in einem anderen Medium
führen und zum jeweiligen Changeset linken; nun kann die Diskussion
direkt beim Changeset erscheinen.
Das ist sicherlich noch nicht perfekt und wird mit der Zeit noch
reifen, aber ich finde es
Am 11.11.2014 um 16:06 schrieb Andreas Neumann:
Nutzer DD1GJ http://www.openstreetmap.org/user/DD1GJ hat soeben den
von mir gelöschten Node in abgewandelter Form wieder hergestellt
http://www.openstreetmap.org/changeset/26704923
Nun ist ebusiness als Wert beim Office-Tag eingefügt worden. Da
Hallo Joachim,
On 12.11.2014 06:40, Joachim Kast wrote:
Da ich die Angelegenheit ruhig, sachlich und nachhaltig regeln möchte,
lasse ich mir natürlich von keiner Seite eine Frist setzen.
ich habe dich ja nun auch schon persönlich getroffen und als ruhigen und
sachlichen Menschen erlebt. Ich
Hallo,
Ich habe mit den Kollege -wie berichtet- ebenfalls schon Kontakt und habe
bereits am 26.10 einen Ansatz in Richtung meshing of databases vorgeschlagen.
Ich stelle Joachim den Mailwechsel zur Verfügung, denn von dem
Network-Vorschlag halte ich persönlich für nicht optimal (Änderung
Hallo FOSSGIS-Aktive, OSM-Mitstreiter und alle Open Source GIS und Data
Aktive,
wir verlängern den Call for Papers für die #FOSSGIS2015 bis zum
29.11.2014. [http://www.fossgis.de/konferenz/2015/callforpapers/].
Direkt zur Abstrakteinreichung geht es hier:
Sent: Tuesday, November 11, 2014 at 8:58 AM
From: Volker Schmidt vosc...@gmail.com
To: openstreetmap list - italiano talk-it@openstreetmap.org
Subject: Re: [Talk-it] correzzione tunnel sotto i ponti
Avevo detto che ci sono tanti casi di dubbio. Il problema reale è che
pochissimi mappers
OK grazie ci metto sia man made, produce che shop
Messaggio originale
Da: cascaf...@gmail.com
Data: 10/11/2014 22.03
A: openstreetmap list - italianotalk-it@openstreetmap.org
Ogg: Re: [Talk-it] mappare un frantoio
Il giorno 10 novembre 2014 16:22, Martin Koppenhoefer
2014-11-10 17:50 GMT+01:00 Volker Schmidt vosc...@gmail.com:
Devo segnalare che c'è un possibile conflitto. Se una man_made=watermill
produce olio di oliva, come lo tagghiamo?
L'approccio corretto sarebbe di partire da man_made=mill con subtags
produce
mill_type
ecc.
Ma man_made=mill è
2014-11-10 16:02 GMT+01:00 Matteo Quatrida matteo.quatr...@linuxmail.org:
PS. Per favore, mandate mail in testo e non in HTML. Anche da Gmail è
possibile ed è semplice da fare,
pensavo di farlo, ti riferisci ad Aury? Io vedo nel mio header:
From: Martin Koppenhoefer dieterdre...@gmail.com
2014-11-10 22:15 GMT+01:00 Matteo Quatrida matteo.quatr...@linuxmail.org:
personalmente penso che tunnel debba essere usato solamente quando la
«tecnica realizzativa» è uno scavo attraverso un paesaggio naturale intatto.
ci sono definizioni diverse, la definizione che citi tu è sicuramente
2014-11-11 8:16 GMT+01:00 demon.box e.rossin...@alice.it:
Lo posso anche mettere sullo stesso nodo della cima (natural=peak) se nella
realtà è così? Oppure è sempre meglio distinguerlo?
se coincidono tutti gli attributi lo puoi fare (esempio nome, altezza,
ecc,) ma normalmente sarebbe più
Sent: Tuesday, November 11, 2014 at 9:58 AM
From: Martin Koppenhoefer dieterdre...@gmail.com
Altre definizioni parlano della relazione delle dimensioni: più lungo che
largo. (Non è male, è semplice da vedere / rilevare, e non chiede conoscenze
particolari sulle normative di costruzione).
2014-11-09 10:15 GMT+01:00 Maurizio Napolitano napoo...@gmail.com:
Basta che chi sta dando a google metta tutto in OpenData
Cmq su travic ci sono i dati del trentino, Piemonte e Roma
si, Roma c'è ed è quasi più bella della verità ;-)
Sono dati teorici, vero? Non tiene conto degli autobus
Ciao,
recentemente ho conosciuto i ragazzi di WAMI, una startup italiana che
sta iniziando a lavorare con dati OSM.
sono usciti con due prodotti:
il primo è una API, molto simile ad overpass-api che permette di
ottenere informazioni su POI prossimi ad una determinata coordinata
2014-11-08 19:32 GMT+01:00 yahoo-pier_andreit pier_andr...@yahoo.it:
come si mette una ZTL??
e una zona pedonale dove pero' ci possono andare pulman taxi residenti e
commercianti e altre varie categorie poco chiare???
c'è questa proposta, usata finora 3 volte ;-)
2014-11-09 19:46 GMT+01:00 Davide Mangraviti davide...@inwind.it:
Il tag corretto da aggiungere alla parte tombata secondo me dovrebbe
essere:
tunnel = culvert
Altre indicazioni?
c'é anche culvert=yes come alternativa:
http://taginfo.openstreetmap.org/keys/culvert
Per il momento perde
Da evitare kiosk, il wikiesempio è sui fiori, ma facilmente
estendibile ad altri prodotti: «Do not tag kiosks such as flower
kiosks that do not sell the typical kiosk goods as shop=kiosk. Tag
these with the type of goods they sell, such as shop=florist.»
Un edificio (anche se è piccolo, anche se è
2014-11-11 11:09 GMT+01:00 Simone Cortesi sim...@cortesi.com:
mi hanno chiesto un feedback sui loro prodotti, li trovate anche su
twitter: https://twitter.com/wamiguides
gli avevo scritto all'inizio di Luglio e c'era uno scambio di qualche mail,
perché c'era un problema di attribuzione,
2014-11-11 12:01 GMT+01:00 Martin Koppenhoefer dieterdre...@gmail.com:
2014-11-11 11:09 GMT+01:00 Simone Cortesi sim...@cortesi.com:
mi hanno chiesto un feedback sui loro prodotti, li trovate anche su
twitter: https://twitter.com/wamiguides
gli avevo scritto all'inizio di Luglio e c'era uno
2014-11-11 11:47 GMT+01:00 Mauro Costantini maurocostantini1...@gmail.com:
Un edificio (anche se è piccolo, anche se è di legno
«building:material=wood», anche se sarà smontato tra poco) resta
sempre un edificio con destinazione d'uso ben precisa, quindi senza
dubbio building=retail.
un
Si, sono visualizzazioni basate sugli orari teorici. è stato chiesto di
inserire i dati in tempo reale su travic ma dicono che sono in un
formato non supportato.
The real time data API is not GTFS-RT so it can not be included
https://twitter.com/Janetovan/status/512980131200389120
Il
Ciao a tutti,
seguendo le import guidelines, con questa mail inizio il processo di
discussione sull'importazione dei numeri civici di Biella messi a
disposizione dal Comune.
Il piano di dettaglio - che è oggetto di discussione - è descritto su
questa pagina wiki:
giusto per chiudere con l'argomento, ho fatto un mini tutorial per chi
volesse replicarlo:
http://www.piersoft.it/?p=297
Il giorno 10 novembre 2014 02:12, Germano Massullo
germano.massu...@gmail.com ha scritto:
I miei più grandi complimenti per la vostra nobile iniziativa.
Per caso siete in
Sent: Tuesday, November 11, 2014 at 10:51 AM
From: Martin Koppenhoefer dieterdre...@gmail.com
si, Roma c'è ed è quasi più bella della verità ;-)
Sono dati teorici, vero? Non tiene conto degli autobus partiti in ritardo,
rimasti fermi per guasto, ecc.? Ho questa impressione, perché gli
Eccellente inizio. Sono curioso per lo script python, magari potremmo
usarlo per sistemare i nomi dei civici toscani e sardi.
Il 11/nov/2014 12:29 Andrea Musuruane musur...@gmail.com ha scritto:
Ciao a tutti,
seguendo le import guidelines, con questa mail inizio il processo di
discussione
Tralasciando il building=collapsed (che come già scritto non descrive
una tipologia di edificio ma è stato introdotto solo nell'ambito delle
crisi), questo mi pare uno dei rari casi in cui taginfo può aiutarci
a capire come si comportano gli altri mappers nel resto del mondo. In
ordine sono:
il
Ottima wiki, asciutta ed ordinata. Segnalo in talk-it-fvg che abbiamo
l'import regionale in corso.
Il giorno 11 novembre 2014 12:28, Andrea Musuruane musur...@gmail.com ha
scritto:
Ciao a tutti,
seguendo le import guidelines, con questa mail inizio il processo di
discussione
2014-11-11 13:25 GMT+01:00 Mauro Costantini maurocostantini1...@gmail.com:
La mia scelta personale privilegia l'uso dei namespaces.
+1
è la soluzione più matura che riesce al meglio di evitare interpretazioni
sbagliati e che si integra migliormente nel resto del sistema.
ciao,
Martin
2014-11-11 12:28 GMT+01:00 Andrea Musuruane musur...@gmail.com:
Ciao a tutti,
seguendo le import guidelines, con questa mail inizio il processo di
discussione sull'importazione dei numeri civici di Biella messi a
disposizione dal Comune.
Il piano di dettaglio - che è oggetto di
2014-11-11 12:28 GMT+01:00 Andrea Musuruane musur...@gmail.com:
Per poter procedere alle successive fasi, che precedono l'import, bisogna
che le comunità (quella Piemontese e quella Italiana) acconsentano a tale
import.
Dovresti anche scrivere alla lista imports, se non l'hai già fatto.
2014-11-11 14:49 GMT+01:00 Martin Koppenhoefer dieterdre...@gmail.com:
2014-11-11 12:28 GMT+01:00 Andrea Musuruane musur...@gmail.com:
Per poter procedere alle successive fasi, che precedono l'import, bisogna
che le comunità (quella Piemontese e quella Italiana) acconsentano a tale
import.
Ciao.
Ho letto la pagina [1], ed ho visto che alla fine i tag sarebbero:
addr:housenumber
addr:street
addr:postcode
addr:city
addr:country
Sarebbe però più pulito avere solo addr:housenumber, ed usare la relazione
associatedStreet per collegare il nodo alla sua strada.
Gli altri tag
Sui nodi come parti di una relazione street ne era parlato in qs giorni. Se
non sbaglio si preferisce il metodo triviale, anche se ridondante per non
confondere gli utenti neofiti che volessero editare.
--
cascafico.altervista.org
twitter.com/cascafico
Syncthing Node ID
Ciao Alberto,
2014-11-11 15:47 GMT+0100 Alberto albertoferra...@fastwebnet.it:
Ciao.
Ho letto la pagina [1], ed ho visto che alla fine i tag sarebbero:
addr:housenumber
addr:street
addr:postcode
addr:city
addr:country
Sarebbe però più pulito avere solo addr:housenumber, ed usare la
Andrea Musuruane wrote
Per poter procedere alle successive fasi, che precedono l'import, bisogna
che le comunità (quella Piemontese e quella Italiana) acconsentano a tale
import.
Mi fa molto piacere questa iniziativa, inoltre il wiki per l'import e' fatto
molto bene.
Solo 2 puntualizzazioni:
-
ciao,
Volevo dirti che la wiki è ottima e molto ben fatta. Complimenti!
segnalo solamente che in OSM attribution si linka un Contributors#Biella
che non esiste...consiglio di mettere la voce relativa a Biella sotto
Contributors#Italy come già fatto per la città di Torino, Palermo e Venezia
2014-11-11 19:04 GMT+01:00 Marco_T toto...@libero.it:
Andrea Musuruane wrote
Per poter procedere alle successive fasi, che precedono l'import, bisogna
che le comunità (quella Piemontese e quella Italiana) acconsentano a tale
import.
Mi fa molto piacere questa iniziativa, inoltre il wiki
2014-11-11 19:23 GMT+01:00 Aury88 spacedrive...@gmail.com:
ciao,
Volevo dirti che la wiki è ottima e molto ben fatta. Complimenti!
segnalo solamente che in OSM attribution si linka un Contributors#Biella
che non esiste...consiglio di mettere la voce relativa a Biella sotto
Contributors#Italy
Ero rimasto a questo schema [1], che dice Instead of using the addr:street
tag, it's also possible to use relations to provide a connection between
housenumber and street. Those are more easy and less error-prone to evaluate
in software..
Io le relazioni le trovo più comode da aggiornare, ad es.
En god nyhed: Den nyeste version af OsmAnd+ (1.9.2g) kan vise cykel- og
vandreruter på downloadede kort.
Sæt hak ud for Kort / Menu / Konfigurer kort / Vis cykelruter
hhv. Kort / Menu / Konfigurer kort / Vandresymbol overlejring (sic!)
Under de første afprøvninger syntes jeg, at der
Det ser helt godt ud.
Prøv også at lege med Kort / Menu Konfigurer kort / Optegningsmåde /
Bil|Cykel|Fodgænger.
Vælger man Cykel, markeres veje med cykelstier med en blå stiplet linje.
Dette kan ligeledes forbedres (f.eks. giver cykelvisning af
oneway=yes;cycleway=opposite en ensrettet cykelsti i
Buenas,
Ya que estamos comentando el tema, indicaros que en el feed RSS en
español sigue diciendo
«Disculpa, pero esta entrada está disponible sólo en Deutsch y English.»
Pero si entras en la web si que sale en español.
Un saludo
Atentamente,
Suárez
2014-11-10 18:58 GMT+01:00 Johnattan Rupire
On Mon, Nov 10, 2014 at 10:34:39PM +0100, Friedrich Volkmann wrote:
On 10.11.2014 19:13, Stephan Bösch-Plepelits wrote:
Nun, ich stimme zu, dass es trivial ist. Das heisst aber noch nicht, dass
es auch getan wird. Nur als Beispiel, openstreetmap-carto, der Standardstil
der OpenStreetMap,
On 10.11.14 19:13, Stephan Bösch-Plepelits wrote:
Nun, man könnte analog etwas wie bei Straßen machen. Dort ist ja während der
Bauzeit highway=construction, construction=primary eingetragen. Nach Eröffnung
wird das dann umgetaggt. Also vielleicht boundary=construction,
Hi!
Nichtsdestotrotz stehen jetzt gerade eben die tags start_date= und
end_date= im admin_level=8 der Daten in Österreich.
Prinzipiell find ich die Idee ja gut .. aber ich wäre ohne Stephan
nicht auf die Idee gekommen und hab mich immer gefragt wieso da grad
alles (also einiges) doppelt
On 11.11.14 13:34, Werner Macho wrote:
Nichtsdestotrotz stehen jetzt gerade eben die tags start_date= und
end_date= im admin_level=8 der Daten in Österreich.
Man hätte die zukünftigen mit future:boundary taggen können, vor allem sollte
man aber zu Sylvester jene
On Mon Nov 10 2014 at 16:45:17 Stefan Tiran stefan.ti...@student.tugraz.at
wrote:
[1] I assume, it is mostly people who see the world only through the
front shield of their car.
I think this argument goes both ways, it all comes down to the level of
abstraction you are going to apply. We
On 11.11.2014 13:13, Andreas Labres wrote:
Ich hatte das schon mal bei anderer Gelegenheit geschrieben: Es ist
grundsätzlich NICHT sinnvoll, dass ein zweiter Tag die Beutung des
ursprünglichen Tags umdreht, verändert, einschränkt, etc. Das war auf bei
highway=primary, construction=yes das
On 11/11/2014 02:40 PM, Friedrich Volkmann wrote:
On 11.11.2014 13:13, Andreas Labres wrote:
Ich hatte das schon mal bei anderer Gelegenheit geschrieben: Es ist
grundsätzlich NICHT sinnvoll, dass ein zweiter Tag die Beutung des
ursprünglichen Tags umdreht, verändert, einschränkt, etc. Das war
mh.
also ich habe das bis jetzt so verstanden:
start_date ist das baujahr,
das zB auf brücken, häusern, marterln usw ja öfter anschrieben ist.
liegt üblicherweise in der vergangenheit und ist eine info, die nur
ausgewertet werden wird, wenn es jemand drauf anlegt. besonders dadurch
Hallo,
Am letzten Grazer Stammtisch haben einige Leute Interesse an einem
JOSM-Workshop gezeigt.
Ich würde mich gerne bereiterklären einen zu halten, wenn sich
mindestens 3 Leute finden.
Als Ort würde ich das Spektral¹ in Graz vorschlagen (sofern zu dem
Termin frei), es ist gemütlich und es gibt
Ao não virar à direita no local indicado pela aplicação OsmAnd+ verifiquei
que me mandou virar depois à esquerda quando o caminho correcto mais curto
seria ir em frente 100 metros em linha recta depois virar à direita
em linha recta .. ao fim de 200 metros estou no destino.
Conclusão
Bonjour
J'ai une proposition d'amélioration d'osmose. Je crois que c'est pas le
bon endroit, mais j'ai pas réussi à trouver le centre d'erreur d'osmose :
L'étiquette qui développe l'erreur lorsque la souris passe au dessus
d'un marqueur est toujours au dessus de ce dernier. Or, lorsque le
Le 11 nov. 2014 à 10:44, David Crochet david.croc...@free.fr a écrit :
Bonjour
J'ai une proposition d'amélioration d'osmose. Je crois que c'est pas le bon
endroit, mais j'ai pas réussi à trouver le centre d'erreur d'osmose » :
C’est ici pour déposer un ticket :
Bonjour,
Est-ce que les dates sont également fixées ? Ça peut paraitre lointain,
mais certains agendas se remplissent plus vite que d'autres, y compris 6
mois à l'avance !
JB.
Le 18/10/2014 13:23, Louis-Julien de la Bouëre a écrit :
Bonjour à toutes et tous,
Je suis heureux de vous annoncer
Bonjour,
Astellia, un des leader sur les solutions de monitoring de réseaux de
téléphonie mobile et IP viens de tweeter quelque chose d'intéressant.
https://twitter.com/Astellia_news/status/532150841000869888
Un de leur soft et pas des moindres, Nova, utiliserait OSM pour afficher la
position
Louis-Julien de la Bouëre-2 wrote
Je suis heureux de vous annoncer que le CA d'OSM-fr a décider d'organiser
le prochain SOTM France en Bretagne !
Incidemment, pourquoi le site officiel est-il nativement en espagnol plutôt
qu'en anglais?
http://www.stateofthemap.org/
--
View this message in
Bonjour,
Le 11/11/2014 14:22, Shohreh a écrit :
Louis-Julien de la Bouëre-2 wrote
Je suis heureux de vous annoncer que le CA d'OSM-fr a décider d'organiser
le prochain SOTM France en Bretagne !
Incidemment, pourquoi le site officiel est-il nativement en espagnol plutôt
qu'en anglais?
Le 11 nov. 2014 à 14:22, Shohreh codecompl...@free.fr a écrit :
Louis-Julien de la Bouëre-2 wrote
Je suis heureux de vous annoncer que le CA d'OSM-fr a décider d'organiser
le prochain SOTM France en Bretagne !
Incidemment, pourquoi le site officiel est-il nativement en espagnol plutôt
Bonjour,
Est-ce qu'il y a eu un souci avec les scripts BANO cette nuit ?
Le 44 vient de perdre environ 200 voies rapprochées, et à priori ce
n'est pas le seul département dans cette situation, le rapprochement
étant passé de 11.15 à 11.14 millions d'adresses.
Si ce n'est pas un problème de
J'ai regardé layers.openstreetmap.fr au cas ou des frontières seraient
cassées, mais ça ne semble pas être le cas.
Je ne sais pas si c’est normal, mais au niveau :
pays (admin2), il y a des « rectangles » bizarres en Pologne.
admin3, beaucoup de pays ne sont pas coloriés
Ensuite il y a des
Coucou !
Je tombe sur un cas un peu bizarre :
Ce n'est pas rare que la couche BANO affiche une rue non rapprochée,
sans code Fantoir, mais qu'on le retrouve en passant par
cadastre.openstreetmap.fr/fantoir.
Sur Crossac (44), je vois une rue nommée Route de PontChâteauplanche
mar
南会津の大内宿でOSMマッピング&散策会を11月8日(土)開催しました。参加された皆様お疲れ様でした。
ひんやりとした秋晴れのもと、午後1時集合マッピング&散策1時間(そんなに広くないので)、お蕎麦屋さんで食事、コーヒーしながら、マッピング反省会、OSM雑談を1時間半して4時ごろ解散しました。
(日没までマッピングする居残り班もいましたが。。)やはり秋の紅葉シーズン、大内宿駐車場は混雑、入庫の列ができていました。
Wikiにまとめました。
https://wiki.openstreetmap.org/wiki/JA:Ouchi-juku_Mapping_Party_20141108
Hi Dennis,
When do think you'll release distance matrix working with distance and time?
Thanks.
On Wed, Oct 22, 2014, 22:45 Helder Alves helderalve...@gmail.com wrote:
Hi All,
Where is that PR? I can't find it...
Thanks.
--
Helder Alves
On Oct 22, 2014 2:33 PM, Dennis Luxen
On 2014-11-10 21:51, James Mast wrote:
I'm just curious, but can anybody verify the speed limits that user
msheerin17 [1] has been randomly adding across the US? He seems to fond
of adding a lot of 'maxspeed=55 mph' tags to ways in completely
different areas (he does add other speed limits, but
1 - 100 of 109 matches
Mail list logo