Re: [Telrad] UE upgrade failure rate

upgrade. The 8000s, however, seem to be another story. I am > >> so scared to touch the ones we have in the field anymore. We have had > >> a couple that seem to get their configs corrupted after a firmware > >> change, and get into very funky states. > >> > >>

Re: [Telrad] BreezeWAY EPC spontaneous reboots?

enough with the > procedure that I can do it myself. > > > > To me, it sounds like confd is bombing out, and other processes (mme, > pgwc) are trying to talk to it, unsuccessfully (since it isn't running). A > few minutes later, I presume the 'forker' process sees the problem and >

Re: [Telrad] More CPE8K woes

> jhaus...@gmail.com > > > > Heritage NetWorks > > Whitestone Power & Communications > > Vertical Broadband, LLC > > > > Schedule a meeting: http://doodle.com/jermudgeon > > > > > ___ > > Telrad mailing list > > Telrad@wispa.org > > http://lists.wispa.org/mailman/listinfo/telrad > > > > > ___ > Telrad mailing > listTelrad@wispa.orghttp://lists.wispa.org/mailman/listinfo/telrad > > > > ___ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > > -- *Matthew Carpenter* *806-316-5071 office* *806-236-9558 cell* ___ Telrad mailing list Telrad@wispa.org http://lists.wispa.org/mailman/listinfo/telrad

Re: [Telrad] CPE 8000 boot time

No that is way too slow. Normally once you can PING the radio the GUI (from the LAN port) will be ready. Then it will say connecting, and this takes just 15-20 seconds longer. Matt Carpenter Amarillo Wireless > On Dec 27, 2016, at 11:09 AM, Adam Moffett wrote: > >

Re: [Telrad] ENB CINR stats?

gt; jhaus...@gmail.com > > Heritage NetWorks > Whitestone Power & Communications > Vertical Broadband, LLC > > Schedule a meeting: http://doodle.com/jermudgeon > > > > > ___ > Telrad mailing > listTelrad@wispa.orghttp://lists.wispa.org/mailman/listinfo/telrad >

Re: [Telrad] ENB CINR stats?

articular UE from the ENB's side. > > > > Thoughts? > > > > -- > > Jeremy Austin > > > > (907) 895-2311 > > (907) 803-5422 > > jhaus...@gmail.com > > > > Heritage NetWorks > > Whitestone Power & Communications

Re: [Telrad] CPE8000 reset/QAM64

Gotcha, did not know that had changed. We pre-setup UE's before they go out the door, and the new firmware has it turned off. Matt Carpenter On Tue, Dec 6, 2016 at 1:45 PM, Jeremy Austin <jhaus...@gmail.com> wrote: > > On Tue, Dec 6, 2016 at 10:43 AM, Matthew Carpenter

Re: [Telrad] Issues

|Toll Free > +1.866.727.4138 > > > > *From:* telrad-boun...@wispa.org [mailto:telrad-boun...@wispa.org] *On > Behalf Of *J Portman > *Sent:* Thursday, November 17, 2016 11:22 AM > *To:* telrad@wispa.org > *Subject:* Re: [Telrad] Issues > > > > We use 2/2 subframe

Re: [Telrad] Issues

? > > -- > Justin Davis > COO > SkyWerx Industries, LLC > > On Nov 16, 2016, at 7:28 PM, Matthew Carpenter > <mcarpen...@amarillowireless.net <mailto:mcarpen...@amarillowireless.net>> > wrote: > >> Two Centralized EPCs. >> >> Righ

Re: [Telrad] Issues

EPC? > > Thanks > > -- > Justin Davis > COO > SkyWerx Industries, LLC > > On Nov 16, 2016, at 4:43 PM, Matthew Carpenter < > mcarpen...@amarillowireless.net> wrote: > > From what I have seen running 4573: > > 1. 4x4TM4 is working good. I have 2 eNB’s using it

Re: [Telrad] Issues

From what I have seen running 4573: 1. 4x4TM4 is working good. I have 2 eNB’s using it with good speeds through trees. In one location I saw 63Mbit x 7.3Mbit and a CINR of 27. UBNT 5ghz at this same location was around 79db and we would not install. 2. Better performance. Jury is still out

Re: [Telrad] CPE8000 impressions?

oes > seem to be notably improved. Unfortuantely, we don't get CINR (though both > should be pretty close to each other), and we only see the 2 chains SINRs > combined into one value, which isn't optimal. > > > > -- Nathan > > > > *From:* telrad-boun...@wispa.org [mailto:te

Re: [Telrad] CPE8000 impressions?

___ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > -- *Matthew Carpenter* *806-316-5071 office* *806-236-9558 cell* ___ Telrad mailing list Telrad@wispa.org http://lists.wispa.org/mailman/listinfo/telrad

Re: [Telrad] L3 MTU settings

nkey around with things unessisarily. > > > > > > > > Cheers, > > __ > > Andreas Wiatowski | CEO > > Silo Wireless Inc. > > Email andr...@silowireless.com > > 19 Sage Court > > Brantford, Ontario N3R 7T4 (CANAD

Re: [Telrad] AMBR

___ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > > > ___ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/li

Re: [Telrad] CPE reconnect

If the UE tries to connect to the eNB and is unable to AUTH the SIM card then it will blacklist after 3 or 4 attempts. At that point the UE must be rebooted to connect. I have seen this happen many times back last January. No way around it, its a LTE thing.. On the UE’s dropping from 50-60Mbit

Re: [Telrad] CPE8000

That is all on 2x4 mode at this time. Much of our system is Clean LOS, so enabling 4x4 actually decreases performance some. Matt Carpenter On Tue, Oct 4, 2016 at 11:35 AM, Jeremy Austin <jhaus...@gmail.com> wrote: > > On Tue, Oct 4, 2016 at 8:28 AM, Matthew Carpenter

Re: [Telrad] Telrad Digest, Vol 22, Issue 23

> Whitestone Power & Communications > Vertical Broadband, LLC > > Schedule a meeting: http://doodle.com/jermudgeon > > _______ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > >

Re: [Telrad] CPE8000

> > > > Thanks > > > > Adam > > > > > > > > > > ___ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > > -- *Matthew Carpenter* *806-316-5071 office* *806-236-9558

Re: [Telrad] Down tilt - UE drops

We have 4 eNB’s deployed, 106 UE’s and its working good. I had a UE that needed a reboot this morning (7000 on Beta firmware), but other then that our service calls for LTE service issues are far and few between. The Telrad LTE product has had a few bumps in the road, but all have been taken

Re: [Telrad] UE roaming on 6.6?

ting: http://doodle.com/jermudgeon > > _______ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > > -- *Matthew Carpenter* *806-316-5071 office* *806-236-9558 cell* ___ Telrad mailing list Telrad@wispa.org http://lists.wispa.org/mailman/listinfo/telrad

Re: [Telrad] Wimax to LTE

First thing I see is that your CINR 0 and 1 are more then 2 db apart.  This seems to cause issues.So much so that I have a graph that's shows me any UE with 2 or more db difference in CINR.  Matthew Carpenter Amarillo Wireless 806-316-5071 On Thu, Aug 4, 2016 at 10:22 AM -0500, "Ian F

Re: [Telrad] 4x4 config?

; Communications > Vertical Broadband, LLC > > Schedule a meeting: http://doodle.com/jermudgeon > > _______ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > > -- *Matthew Carpenter* *806-316-5071 office* *8

Re: [Telrad] 4x4 config?

in the last week and it works everytime.  Matthew Carpenter Amarillo Wireless 806-316-5071 On Fri, Jul 15, 2016 at 8:16 PM -0500, "G. Nicholas" <gnicho...@nwnc.net> wrote: Matt, Nick posted updated v6.6 manuals for the EPC and Compact on the Zendesk support site t

Re: [Telrad] advice on diagnosing speed issues

ng traffic of > 8 dbm, but poor link tests, especially in the upload. > > > > Where do you go from there? > > ___ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad > > -- *Ma