of texpower 0.08f which
now checks for amsmath 2.x. This is also updated
in the development version of texpower 0.0.9b at
http://lrb.cs.uni-dortmund.de/~lehmke/TeXPower/preview/texpower.sty
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS
this kind of problem.
Alas, sometimes only trial-and-error helps. As I have a lot
of experience with this kind of thing by now, the list is
indeed the right place to ask. And I promise to try answering
more promptly in the next time :-)
regards
Stephan
--
Stephan Lehmke [E
standard setup,
but you can easily make them yourself by prepending "e" to a
color name.
\replacecolor{etextcolor}{blue}
in the preamble will give a much more `enhanced' effect for the
text color.
> Is there a way to let the
> steps be shown in the default color?
That's e
rything outside slide environments is
ignored.
Try moving the \pagestyle command before \begin{document}.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
for \pageDuration will also
work.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
ersion of powersem
to use seminar's raggedright mechanism (controlled by
\raggedslides) instead of \raggedright, which not only
is more canonical, but also avoids this error message.
Please try again with
http://lrb.cs.uni-dortmund.de/~lehmke/texpower/preview/powersem.cls
if you like.
regards
Ross Moore already answered to this. As I pointed out, a lot
of these warnings will vanish with the current development
version of texpower, and even more with a new pdftex version.
Until then, the warnings can safely be ignored.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
ting
the problem.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
gobackbutton, \nextstepbutton,
\nextpagebutton, \nextfullpagebutton, \fullscreenbutton.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
f TeXPower,
to be found at
http://lrb.cs.uni-dortmund.de/~lehmke/texpower/preview/texpower.sty
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
in the dialogue is effectively ignored.
Unfortunately, 9 Minutes 6 Seconds is all the time you'll
get for one slide; for a setting of 547 and above (arbitrary,
isn't it?), at least here there seems to be some kind of overflow
and acrobat 5 goes into `fast forward' mode :-(
reg
LaTeX ;-)
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
_after_ these,
at best it should be the very last package loaded.
Also, hyperref should be the last-but-one.
> \usepackage{seminar}
I'm flabbergasted that this works at all. What
is it supposed to do?
seminar.sty is a leftover from LaTeX2.09 days, superseded
by seminar.cls, which is already lo
oread 5.0,
but I'd be interested in any feedback.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
Quick advice: Install new versions of all
relevant files (pdftex, hyperref, pdftex.def)
and try again. If the problem persists, send
me the log and pdf files produced.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
feel free to ask here
(quoting the problematic code, please).
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
n't
consider all side effects...
Alan showed how to circumvent the myslide problem, for
the other one I'm at a loss also.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
gt; something like:
>
> [I havent got time to check this now Im afraid, but..]
>
>
> Is this possibly a seminar problem rather than a texpower problem?
A powersem `problem' really, which will activate seminar's
slidesonly option if the display option is given.
regards
nism for steps gets confused.
Changing the second \bstep to \rebstep and the first
\step to \restep seems to remedy this.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
-column-tabular leads to a nearly(!) perfect result.
> But after the first entry the tabular steps one millimetre or so upwards.
Using \parstepwise should cure this.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
Put % on every line ending.
If the problem persists, provide a minimal example demonstrating
the problem.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
LaTeX
If one of these is older on your system, please update
and see whether the problem goes away.
If your hyperref is newer than mine, I'll have to update
and test again ;-)
If the problem stays after updating, please send a log
file so I can try to find what's different.
regards
St
nor pdf) or xdvi, but then again it's hard to verify such
things with a viewer clearing the screen between frames...
Anyone care to make screenshots and calculate the `true'
difference with an image manipulation tool?
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
sem}
> \display
I'm not sure this is a good idea. At least, it's not
trivial. A lot of code is defined differently at loading
of powersem and texpower, depending on whether or not
the display option is given.
Putting this into a command may break things big time.
> I want to wr
I'm not sure I understand what you mean.
Could you post an example of what a document you desire would
look like and why the same isn't possible at the moment?
It shouldn't be too inconvenient to write
\documentclass{powersem}\centerslidesfalse
instead of
\documentclass[center
option isn't given.
Could you post a minimal, but complete test example which
exhibits the effect?
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
or some
anti-aliasing effect? Did you look with maximal
magnification?
If yes, please post a complete (minimal) test example.
> I got this with or without the option lightbackground, fixcolorstack
These shouldn't have any influence here, unless
you're using dvips.
regards
Stephan
--
n use \includegraphics without the figure
environment.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
tepwise*
{%
\begin{enumerate}
\mystep{\item This is item 1.}
\mystep{\item This is item 2.}
\mystep{\item This is item 3.}
\end{enumerate}}
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
obust way of
doing the same for eqnarray, so I'd like to look
into this a little deeper before breaking
anything...
For aligned equations, I advise to use align and
friends from amsmath, which are handeled
differently.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
ackage, which in
turn is loaded by hyperref.
Try installing a new version of hyperref and look whether
the error goes away.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
nd whether
acroread and pdftex support it. Maybe you'll get a competent
answer from the pdftex list or the newsgroup comp.text.pdf.
The adobe website also has a forum, but the one time I looked
into it, it seemed to have a very low level and not to be read
by developers.
regards
Stephan
-
under
ftp://ftp.fi.muni.cz/pub/tex/local/cstug/thanh/pdftex/snapshots/2912/
which was just announced to remedy this problem
(I'm not planning to install it just for testing
this out, so I'll be happy to hear from anyone
who does).
regards
Stephan
--
Stephan Lehmke
ation...
> What am I doing wrong?
Maybe you could post the log entries showing the version numbers
and dates of hyperref, powersem, ifmslide (and the one showing the
driver used by hyperref)...
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS
anish, but appear visible in color pagecolor
in front of anything which is of a different color.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
n}.
If you want different defined colors to go
to different shades of green, redefine the
dimmed variants (dtextcolor, dmathcolor, ...)
accordingly (using \definecolor or \replacecolor).
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
t mechanism
for switching between portrait and landscape.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
into the first step,
like this:
\stepwise{%
\step{%
\begin{enumerate}
\color{colori}\item Einleitung
\step{\color{colorii}\item Antennen und Wellenausbreitung}
[...]
\step{\color{colorxi}\item Anwendungen}
\end{enumerate}
}%
} % <- Zeile 44
regards
Stephan
--
dstep\item we ``discover'' the structure of the document (DTD)
\dstep\item SGML tools (nsgmls, yasp) help us to correct the source
\dstep\item we can produce the ``printing'' markup again
\dstep\item we can use SGML format for other applications
\end{itemize}
}
regards
Stephan
\value{tocdepth}
As a typical presentation won't contain more than a couple
dozen builds, this should be feasible (especially as bookmarks
are organised in `folder fashion').
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Te
h chemical
purity}
works.
The documentation of the soul package has more info on this
kind of problem.
Maybe I should extend the section in the FAQ on this
matter.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
ch demand for this (at least making a
target like beginningof.page.n which works like
page.n but points to the first page of the sequence
is easy), this'll have to wait until the first beta
release of TeXPower.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fa
n
out of intention.
If you want several \step's to appear simultaneously in
arbitrary order, just write \step[\value{step}=i]{} several
times.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmu
\\{\addButton {\buttonwidth }{\@Panelhomepagename }}\\ \pfill \Acrobatmenu
\ETC
> .
> ! Paragraph ended before \href@split was complete.
>
>\par
> l.33 \tableofcontents
Never seen this here. Is this supposed to happen with the
source you have attached?
regards
e/tex-archive/macros/latex/contrib/supported/koma-script
or any other CTAN mirror, it will unpack scrartcl.cls among others.
Soul is also on CTAN under e.g.
ftp://ftp.dante.de/tex-archive/macros/latex/contrib/supported/soul
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECT
<[EMAIL PROTECTED]> wrote on Thu, 6 Jul 2000 15:14:31 +0200 (METDST):
>
> >>>>> "Stephan" == Stephan Lehmke <[EMAIL PROTECTED]> writes:
>
> Stephan> I'm just wondering about one
> Stephan> thing: You're overlaying al
tput from xfig and the tpmultiinc
> macro in the latex source I avoided [order problems]. Besides I don't
> have to edit the source every time I change the figure in xfig.
Sounds great. If you're indeed using this technique for
your talk, may I ask for permission to include the
present
On Mon, 3 Jul 2000 12:47:03 +0200 (MET DST), Stephan Lehmke wrote:
> You can get the seminar default back by adding
> \centerslidestrue to the preamble of your document.
Oops, this was true until powersem version 0.4, when I
tried to make incremental footnotes look nicer ;-)
With the c
r document.
If you want only non-incremental slides to be centered,
you can set \centerslidestrue for specific slides only.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
m gnuplot to PSTricks and add \steps and any
decoration directly into the PSTricks code (xfig not
used here).
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231 755 6434
Universitaet Dortmund FAX 6555
D-44221 Dortmund, Germany
e back-end driver pdftex ;-)
> Using hyperref package without specifiing the back-end driver I get very
> strange paper dimensions.
a) Make sure you're loading fixseminar _after_ hyperref.
b) Look into the FAQ, item 4.4.
regards
Stephan
--
Stephan Lehmke [EMA
dftex.def from
http://www.tug.org/applications/pdftex/pdftex.def
and try again.
> P.S.: How can I make the foils start immediately in full screen mode?
You need the hyperref package to do that.
Try
\usepackage[pdfpagemode=FullScreen]{hyperref}
regards
Stephan
--
Stephan Lehmke
I've added that now and am building a micro-update right
now (ETA 10:00h).
It seems to work with the small example derived from your
\documentclass setting.
Please try it out on your document. If it still doesn't
work, please provide a minimal example.
regards
Stephan
--
now set both page and text color.
-
You can download everything from the website
http://lrb.cs.uni-dortmund.de/~lehmke/texpower
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel. +49 231
work well
with pdflatex as well as LaTeX+dvips. Let's see
whether it causes any problems.
Until then, just put
\pagecolor{pagecolor}%
\color{textcolor}%
behind darkbackground.
regards
Stephan
--
Stephan Lehmke [EMAIL PROTECTED]
Fachbereich Informatik, LS I Tel.
v0.0.8a):
Fixed a bug in the code which disables \pageDuration if the
pdfpageduration key doesn't exist.
-
You can download everything from the website
http://lrb.cs.uni-dortmund.de/~lehmke/texpower
regards
Stephan
--
Stephan
56 matches
Mail list logo