ule!
> ___
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
--
Best Regards,
to GMT at the end of the BST offset?
Thanks!
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time
08/02/2018 07:31
Does a frequency counter connected to a permanently running (Trimble
Thunderbolt) GPS
disciplined frequency standard need to warm up after switch on before readings
settle?
Just curious, thanks.
--
Best Regards,
Chris Wilson.
mailto: ch
/2101849
on 08/01/2018 13:11 you wrote:
> Divide the 10MHz by 2 and use a filter to extract the fifth
> harmonic from the 5MHz square wave output.
> Amplify the 25MHz output from the filter if required...
> Bruce
> On 09 January 2018 at 00:31 Chris Wilson <ch...@chriswilson.t
as it
divides only. Thanks, please keep replies to the level an idiot might
comprehend :)
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
--
Best Regards,
Chris Wilson.
___
German Federal institute of Physics and Technology)
> service to check the PC's time:
> <https://uhr.ptb.de/>
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to ht
just now,
it's at http://www.gatesgarth.com/time.jpg
I use NTP for low signal WSPR transmissions and a second out isn't the
end of the world, if indeed something IS out. More academic than
problematic, thanks
--
Best Regards,
Chris Wilson.
mailto: ch
einberg or NTP (which is what I am
currently using and seems to work just fine)?
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
the date glitch affect this? Lady Heather communicates with the GPS
via a true serial port. Thanks!
--
Best Regards,
Chris Wilson. 2E0ILY
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe
?
Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
, but that's not an issue as
I rarely use them. Thanks for the info.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nut
the Trimble itself?
Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
://www.vk3hz.net/XRef/XRef_Home.html#XRef-Vx
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
That answers my question perfectly Charles, many thanks for the
detailed reply, much appreciated.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi
them out, I will use one for splitting the feed!
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
=esrc=ssource=webcd=4ved=0CDMQFjADurl=http%3A%2F%2Fwww.perdrix.co.uk%2FFrequencyDivider%2FFrequency%2520Divider%25202.1.pdfei=g5AVVbDXGcSy7QbLioCAAQusg=AFQjCNHiXeXt-NZksvMBKYHfkJPf5mn_Fwsig2=kXB0iLgZhoDuB8shplLFqAbvm=bv.89381419,d.ZGU?
--
Best Regards,
Chris Wilson.
mailto
sound. What the devil is it?
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
to
use Lady Heather to interface with a PC for setting the time, is that
true? Thanks. My main desire for accuracy is amateur radio digital
modes.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts
? thanks
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
it means? thanks
03/08/2014 18:37
Typo, that should of course have been :
http://www.gatesgarth.com/heather_error.jpg apologies.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts
Heather works fine, but just
thought I'd try this Trimble app. Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi
.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
05/01/2014 10:57
I see occasional references to Trimble Studio here. What is it
please? An alternative to Lady Heather for Thunderbolts, or have I
missed the plot entirely? Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
with it later, much appreciated.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
snap one up?
http://www.ebay.co.uk/itm/Extron-ADA-6-300MX-HV-HDTV-RGBHV-1-x-6-Analog-Video-Distribution-Amplifier-DA-/200906840539?pt=UK_Sound_Vision_Otherhash=item2ec6fb19db
Thanks Dave and Charles for the replies!
--
Best Regards,
Chris Wilson
plenty, but I was also notified he'd sold
something like 15 in the last 24 hours, by an automated Ebay pop up?
Just bought one myself!
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
on getting a high frequency into the
thing? Hope this may help someone, the switching arrangement is a bit
odd at Q12, I think I know why, but won't cloud the water with
misinformation. Thanks everyone, have a good Christmas and a happy New
Year.
--
Best Regards,
Chris
11/12/2012 13:53
Is there a version of Lady Heather for Linux, or any equivalent
application please? Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
, to this thread for closing to posterity searchers.
(And me.)
And, in the mean time, good luck, bon debugging.
-Rex
10/12/2012 13:40
Will do Rex, but I was worried this thread may not have been strictly on
topic for this reflector. Comments?
--
Best Regards,
Chris
/TP4-...put-signal.jpg
I would need explicit instruction to poke about using the SA. It's an
HP 8568B. Thanks again Paul :)
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
measurement.
It has saved my bacon many times.
It also protects the input connector from excessive wear.
Didier KO4BB
Sent from my Droid Razr 4G LTE wireless tracker.
-Original Message-
From: Chris Wilson ch...@chriswilson.tv
To: Chris Wilson ch...@chriswilson.tv, Discussion
from a
Thunderbolt. Plenty
of signal, and the fat (well shielded) cables let me listen to WWV.
08/12/2012 11:30
Thanks for that Chuck, appreciated.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time
with regard to file names, scope patterns
are at http://www.gatesgarth.com/scope/scope.zip
Pretty stuck as to where to go next now.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
and the schematics. Thanks.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
reference used.
So Band 2 appears to have a further issue. Will refer to the manual
and see if I can fathom it out. Any ideas as to why Band 2 will only
read from 185 MHz upwards please? Thanks.
--
Best Regards,
Chris Wilson
standard, at the same time?
Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
It sounds like a SW limit, not hardware.
Silly question: Have you read the manual?
-John
29/11/2012 15:31
Hi John, will re read the section on limits, but please see my reply
to Chuck I just posted. Cheers.
--
Best Regards,
Chris Wilson
:) Thanks for that.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
?
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
for your input Charles.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
is at:
http://www.gatesgarth.com/phaselocklooptext1.jpg
and at
http://www.gatesgarth.com/phaselocklooptext2.jpg
Thanks for looking!
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time
, memory and display tests pass AOK.
If I get it running further I may try and boorow a friends microwave
sig gen, rather than try getting clever and break it agin with too
high an input signal. Thanks very much for the tips Ed, much
appreciated.
--
Best Regards,
Chris
have
mine alongside a skylight (Velux window) so I just reached through to
install it.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman
as daft as me to buy something totally unsuitable. I want to run David
Partridge's divider board and have enough 10MHz signalleft to run other
stuff as well, David recommended I run the amp between the TB and his
divider. Cheers.
--
Best Regards,
Chris Wilson.
mailto: ch
sine wave from the TB, or will the signal from the divider do
the same job, as well, for almost all purposes? Thanks.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https
.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
the
Thunderbolt for this timer / counter please, yet retaining 10 Mhz for
my other devices that want a 10MHz reference signal? Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time
Will be needing some sort of line distribution amplifier soon, been
buying test gear! I believe some people have had good results with TV
aerial distribution amps?
Thanks.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list
the answer for low $$'s :)
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
on 24 hours a day, seven days a
week?
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
the output of a GPS disciplined 10MHz standard be altered
in frequency for this purpose? Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
You could use a frequency synth with an external 10 MHz reference
to generate the required 15.6 MHz signal.
On 06/29/2012 02:54 AM, Chris Wilson wrote:
29/06/2012 10:49
Titter if you must, but if you don't ask, you don't learn. My newly
acquired Kenwood TS-590 transceiver has
,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
of
the monitor as I found it this morning at:
http://www.chriswilson.tv/trimble.png
It has also always shown a Leap Second Pending minor alarm, but I
believe this is quite usual?
Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
a
correction via Dimension 4 immediately before checking the difference.
Why is that please? Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
Dimension 4 immediately before checking the difference.
Why is that please? Thanks.
--
Best Regards,
Chris Wilson.
Chris, you do know that GPS time and UTC are offset because of accumulated
leap seconds?
http
? I am not sure how
many satellites it needs to see to work properly. A mount about 3 feet
above the gutter line would be neat and trivial. Thanks again.
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts
current do they draw off the mains, it's not going to cost a bomb
leaving it on 24 hours a day, is it? Thanks.
--
Best Regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
they appear to be oozing from the
woodwork, over here in the UK they are harder to find in demonstrably
working order for a decent price. My top budget is £950. I can collect
and I can make snappy decisions. Thanks.
--
Best Regards,
Chris Wilson
,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
of money ;)
Thanks!
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
apparently are,
but it's good to know that such a friendly and sharing group of
experts exists in one locale!
03/06/2012 22:50
--
Best Regards,
Chris Wilson.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe
in the UK.
--
Best regards,
Chris Wilson mailto:ch...@chriswilson.tv
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
70 matches
Mail list logo
