Public bug reported:
Because of bug #2033652 I was trying to report a gdb crash from
/var/crash. It spent a long time uploading data, then and then popped up
an error dialog:
Network problem
Cannot connect to crash database, please check your internet connection.
HTTP Error ???: Bad gateway
(I
Public bug reported:
I was debugging gimp when gdb to debug bug #2031907 when gdb crashed on
me and reported a useless backtrace followed by this:
---
A fatal error internal to GDB has been detected, further
debugging is not possible. GDB will now terminate.
This is a bug, please report it.
I do not see this issue often enough to be able to reproduce it for
troubleshooting purposes. Can't remember the last time I saw it.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
I mean, the bug is three years old and presumably by now the vast
majority of web sites have renewed their certificates and the new ones
are compatible with SECLEVEL=2 since all of the signing authorities
stopped issuing incompatible ones years ago, so it's kind of moot at
this point.
--
You
Public bug reported:
If you suspend from GNOME, wake your machine back up, and then once it's
totally back up, run `shutdown --show` as root, it says "syspend is
scheduled for (null)". It shouldn't say (null) there, which I suppose is
a different bug, but the bug I'm concerned about is that the
** Attachment added: "printers.conf"
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/2007413/+attachment/5647479/+files/printers.conf
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
Public bug reported:
When printing to the printer "m479" shown in the attached config files,
specifying the number of copies to print doesn't work, i.e., I always
get one copy. This is true both from GUI print dialogs and from lp on
the command line.
ProblemType: Bug
DistroRelease: Ubuntu 23.04
Interestingly, the wifi icon is currently flapping back and forth
between the question mark and the fully connected symbol every few
seconds. If I run nmcli networking connection check in a loop it
switches to "full" when the fully connected symbol is showing and
"portal" when the question mark is
jik@framework1l:~$ nmcli networking connectivity check
portal
jik@framework1l:~$
I'm not using a VPN.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1844897
Given your description, I don't think the upgrade left resolvconf
installed. I think I can my ansible playbook after running the upgrade
and it reinstalled resolvconf which had been uninstalled by the upgrade.
I guess if resolvconf can't be removed yet because of the reverse-
dependencies, then
Public bug reported:
If I create a 5-second video of my desktop with the "Take a Screenshot"
tool (as an aside, is that tool built into gnome-shell now or something?
I couldn't figure out what executable the app icon corresponds to, i.e.,
I couldn't find the desktop file for it :shrug:) and then
See: https://github.com/jikamens/remember-the-yubikey
The relevant part here is that the unit file just starts up a shell
script that checks if my YubiKey is plugged in, and if it isn't it
exits.
I don't keep my YubiKey plugged in when the laptop is closed and idle —
and it certainly wasn't
Two ideas, one of which I've already mentioned above:
1) You could migrate the address and port settings from sshd_config to
listen.conf _before_ installing the new sshd_config, so that they will
be preserved even if the config gets replaced with the vendor version
because of a merge conflict
1) Nobody reads the release notes.
2) I am not "overwriting configuration files with 'known good' ones," I
am making specific changes to the config files with ansible plays.
Specifically, before fixing my playbook for Kinetic, it looked like
this:
- name: enable root ssh public key
Hello,
I am unclear about why you are asking for the contents of my sshd_config
file, given that the problem I described here isn't the merge conflict,
but rather what happens in terms of the migration from ssh service to
socket when the user opts to install the vendor version of sshd_config
as a
It looks like in today's Kinetic update iwd was removed, perhaps because
of this bug?
If so then the removal caused another problem:
/etc/NetworkManager/conf.d/iwd.conf still existed after the iwd package
was removed (I don't understand why, honestly), so even after I unmasked
and re-enabled
Public bug reported:
Setting up network-manager-config-connectivity-ubuntu (1.40.0-1ubuntu2) ...
Failed to restart network-manager.service: Unit network-manager.service not
found.
invoke-rc.d: initscript network-manager, action "force-reload" failed.
ProblemType: Bug
DistroRelease: Ubuntu 22.10
systemctl disable wpa_supplicant wasn't good enough. I had to mask it.
Before I masked it, something started it on reboot even when it was
disabled (I don't know what was starting it).
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
Public bug reported:
ThinkPad X1 Carbon 6th Gen
WiFi was working fine.
Installed today's batch of Kinetic updates.
Laptop can no longer see any WiFi networks (had to dig out my old ThinkPad USB
dongle and plug into my router to be able to submit this bug report).
ProblemType: Bug
DistroRelease:
Public bug reported:
During upgrade from Jammy to Kinetic, I get asked what to do because my
sshd_config has been modified. I say to do a 3-way merge. It says 3-way
merge fails. I shrug, figure I'll just restore my customizations with
Ansible after the upgrade like I always do, and tell it to use
*shrug* I've had this computer since 2016 and when I first set it up I
used resolvconf to configure it and have continued to do that.
It's no skin off my nose—if it's deprecated I'll find something else to
use—but it seems to me that if you're going to keep the package in the
repository you
Public bug reported:
Setting up resolvconf (1.91ubuntu1) ...
cp: not writing through dangling symlink
'/etc/resolvconf/resolv.conf.d/original'
dpkg: error processing package resolvconf (--configure):
installed resolvconf package post-installation script subprocess returned
error exit status 1
Public bug reported:
Shortly after upgrading from Jammy to Kinetic my laptop went to sleep
after I was idle for 20 minutes, as it is configured to do. The lid was
closed when the laptop went to sleep. I was unable to wake up the
laptop. Opening the lid back up should have caused it to wake up but
Yes, the print job in question works when I print it to the driverless printer.
I would not say that it is therefore reasonable to declare that this issue is
resolved, but *shrug* whatever.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
>Do you have cups-filter 1.28.15 installed
Yes, and I rebooted after installing it just to make sure. Problem
persists.
>Or did you try the option "pdftops-renderer=gs" as described there and
which you confirmed as fixing that bug?
I _also_ have this setting in my printers.conf. So clearly this
Here's my printers.conf, since it doesn't look like ubuntu-bug attached
it, and there's no sensitive information in it.
** Attachment added: "printers.conf"
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1968722/+attachment/5579950/+files/printers.conf
--
You received this bug
Public bug reported:
I have a printer named "duplex" configured to print through CUPS
PostScript rendering ("MakeModel HP LaserJet 500 color M551 Postscript
(recommended)", "DeviceURI socket://m551dn.kamens.brookline.ma.us:9100"
in printers.conf) and the same physical printer configured
The file prints with pdftops-renderer=gs.
I can fix this for me personally, but is there any way to adjust the
default CUPS configuration for the type of printer that I have to make
this setting the default for others with the same printer, so they don't
also run into this issue?
** Changed in:
Public bug reported:
I have an HP LaserJet M551dn printer which usually works just fine with
CUPS. Tonight, however, I discovered that I was completely unable to
print one particular PDF file (unfortunately I can't provide you with
the file because it's a scan of a tax form with PII on it). CUPS
This is still a problem but I'm not convinced it's enough of a problem
to warrant reopening the ticket.
I run into this because my `systemd --user` process persists between
logins because I have persistent service units running under it. For
most people `systemd --user` will exit when they log
This appears to no longer be an issue with the current versions of
systemd and udev in 21.04.
** Changed in: systemd (Ubuntu)
Status: Incomplete => Fix Released
** Changed in: systemd (Ubuntu Groovy)
Status: Incomplete => Fix Released
--
You received this bug notification
Please tell me specifically how to enable debug and afterward capture
the logs that you want to see.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1916418
Title:
Custom
For those of you who landed here looking for how to use DisplayLink in
Hirsute, I wrote up a workaround here: https://blog.kamens.us/2021/03/19
/update-on-using-displaylink-with-ubuntu-21-04-hirsute-hippo/
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
I performed the splash -> nosplash test described above; it made no
difference.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mesa in Ubuntu.
https://bugs.launchpad.net/bugs/1920067
Title:
Xorg with EVDI can't start with
** Also affects: mesa (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mesa in Ubuntu.
https://bugs.launchpad.net/bugs/1920067
Title:
Somehow today's Hirsute updates have
Public bug reported:
As I indicated in a bug report I filed earlier today,
https://bugs.launchpad.net/ubuntu/+source/evdi/+bug/1920059, evdi-dkms
can no longer compile the evdi kernel module with the 5.11 kernel. So,
to work around this, I need to keep using the 5.10 kernel instead.
But I can't,
** Attachment added: "list of packages upgraded today from dpkg.log"
https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/1917515/+attachment/5471986/+files/upgraded.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lvm2
Public bug reported:
Note: I'm guessing that lvm2 is the most likely culprit for this issue,
but I don't know for certain.
After today's Hirsute upgrades, my system won't boot. The boot gets to
the point where it asks me for the passphrase for my encrypted root
disk, and I enter it, and then it
Public bug reported:
DisplayLink uses these udev rules to start the displaylink service when
a displaylink device is plugged in:
ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ATTR{idVendor}=="17e9",
IMPORT{builtin}="usb_id", ENV{DISPLAYLINK_DEVNAME}="$env{DEVNAME}",
There is still something wrong here.
The site in question has fixed the issue in response to my query, and
SSL Labs now gives it an A grade:
https://www.ssllabs.com/ssltest/analyze.html?d=www.toodledo.com
According to SSL Labs, it supports these two ciphers for TLS 1.2:
Fair enough, I will contact the web site maintainer. However, regarding
this:
>You can override this via command-line, a system config file, or a local
>config file + environment variable pointing to it.
>
>On Ubuntu 20.04 LTS:
>
>man SSL_CTX_get_security_level.3ssl
1) I searched high, low, and
Aha! `curl -v --ciphers 'DEFAULT:@SECLEVEL=1' https://www.toodledo.com/`
works but `curl -v --ciphers 'DEFAULT:@SECLEVEL=2'
https://www.toodledo.com/` fails.
According to
https://www.openssl.org/docs/man1.1.0/man3/SSL_CTX_get_security_level.html,
the default security level for the library is 1 if
I may be misunderstanding something, but as far as I can tell this is
not a cipher mismatch problem.
According to
https://www.ssllabs.com/ssltest/analyze.html?d=www.toodledo.com, the
site supports TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256. According to
"openssl ciphers", openssl supports
Example output:
jik@jik-x1:~$ curl -v https://www.toodledo.com/
* Trying 146.20.52.175:443...
* TCP_NODELAY set
* Connected to www.toodledo.com (146.20.52.175) port 443 (#0)
* ALPN, offering h2
* ALPN, offering http/1.1
* successfully set certificate verify locations:
* CAfile:
Public bug reported:
openssl in Ubuntu 20.04 (focal) refuses to connect to a web site that
openssl in Ubuntu 19.10 (eoan), Chrome, and Firefox are all happy to
connect to.
Reproduce with: `curl -v https://www.toodledo.com/'
or: `openssl s_client -connect www.toodledo.com:443`
or: `python3 -c
So, um, this has been broken since Bionic and still not fixed, despite
the fact that ubuntu-bug is the only supported way for reporting bugs?
This seems highly sub-optimal.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
I can no longer reproduce it either. *shrug*
P.S. Hi Ted long time no see.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to e2fsprogs in Ubuntu.
https://bugs.launchpad.net/bugs/1860676
Title:
apt-get dist-upgrade -y hangs
Public bug reported:
My recent apt-get dist-upgrade -y hung here:
...
update-initramfs: deferring update (trigger activated)
e2scrub_all.service is a disabled or a static unit not running, not starting it.
I did a pstree on the apt-get process and saw this:
e2scrub_all.timer restarts just fine; it's the e2scrub_reap.service
restart that's hanging.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to e2fsprogs in Ubuntu.
https://bugs.launchpad.net/bugs/1860676
Title:
apt-get
Public bug reported:
I imported an openvpn configuration with `nmcli c import type openvpn file
config.ovpn`.
After doing that, I edited the IPv4 and IPv6 settings for the VPN to turn off
automatic DNS servers and specify an IPv4 DNS server IP address explicitly.
I have
jik@jik5:~$ sudo systemctl is-enabled whoopsie
disabled
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1843630
Title:
ubuntu-bug not opening anything in the browser
** Attachment added: "crashdb.conf"
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1843630/+attachment/5290988/+files/crashdb.conf
** Changed in: apport (Ubuntu)
Status: Incomplete => New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
Public bug reported:
After experiencing some "turbulence" in my wifi (I rebooted my primary
wifi router, which caused my laptop to fallback onto a secondary access
point which didn't have full connectivity until the primary router
finished rebooting, then I rebooted the primary router a second
Public bug reported:
Ubuntu 19.04, "ubuntu-bug apport" pops up the "Send problem report to
the developers?" with the "Don't send" and "Send" buttons, but when I
click on "Send" nothing happens.
I have the "problem_types" line commented out in
/etc/apport/crashdb.conf, though I don't know if
I called Lenovo and asked and the support rep I spoke with said that the
X1 Carbon's fingerprint reader isn't supported in Linux yet.
I don't know whether to trust that information as accurate, but that's
what he said.
I don't know whether that's worthy of a separate bug report or not. I
mean,
As far as I can tell, the BIOS is able to see the fingerprint reader --
I just booted into the BIOS and told it to reset the fingerprint data,
and it said that it had done so successfully -- so this appears to be a
Linux-specific issue.
--
You received this bug notification because you are a
I have a new Thinkpad X1 Carbon 6th generation. I can see the
fingerprint reader right next to the trackpad, and the specs say that it
has one, but I don't see it showing up in the output of lspci or lsusb.
Maybe I'm missing it? Maybe it's not supported? Or maybe there's a
hardware issue? I'm not
So, whether or not I needed to run pam-auth-update, doing so and
enabling fingerprint authentication there should not cause GDM to break,
nor should the other weird behavior I described above be happening.
Having said that, yes, I was trying to enable login with fingerprint. I
googled how to do
Actually, it's even weirder than that.
I went through all this several times while trying to narrow down the
repro steps, and it's all very bizarre. Somehow I managed to get gdm
working again, and then in a logged in gdm session, I enabled
fingerprint, and exited from pam-auth-update, then ran
Public bug reported:
I ran sudo pam-auth-update, enabled "Fingerprint authentication",
selected "OK", and then rebooted.
GDM wouldn't start after the reboot:
Feb 27 06:29:41 jik-x1 /usr/lib/gdm3/gdm-wayland-session[1551]:
dbus-daemon[1553]: [session uid=121 pid=1553] Activating service
>In comment #13 you told that it prints with Ghostscript via
>
>lp -d duplex -o fit-to-page -o pdftops-renderer=gs
>
>Did it again send the job with a weird paper size? Or did the job come out
>straight away?
Came out straight-away. But this is not actually the behavior that I
want, because
I tried `lp -d duplex -o fit-to-page -o pdftops-renderer=XXX` with
hybrid, gs, pdftops, pdftocairo, and mupdf as the renderers (for the
last I had to install both mupdf and mupdf-tools).
The only one that made it through to the printer was gs.
All claimed to print, but gs was the only one that
It doesn't print with lpr. It doesn't print with lp -d. It doesn't print
from evince. It doesn't print from the chrome PDF viewer.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
>How do I undo what I just did, i.e., how do I undo the option setting
you just had me add to perform this test?
nvm this question I figured it out.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
So, if I use pdftops-renderer=pdftops or pdftops-renderer=pdftocairo
nothing happens on the printer at all. If I use pdftops-renderer=gs the
printer prints the job with a non-standard paper size. If I use pdftops-
renderer=mupdf it fails, even if I have mupdf or mupdf-tools installed,
because
I take it back, there _is_ a difference.
When I use `lp -d duplex -o pdftops-renderer=gs` to print the file, it
does in fact print. I didn't initially notice because the printer was
telling me to insert a weird paper size and I had to override it and
tell it to use the default paper even though
What is the default pdftops-renderer for CUPS in Ubuntu? I can't find it
documented anywhere and I can't figure out how to query CUPS to ask what
it is.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
No change.
How do I undo what I just did, i.e., how do I undo the option setting
you just had me add to perform this test?
** Changed in: cups (Ubuntu)
Status: Incomplete => New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
Public bug reported:
One particular PDF file is failing to print. I have no idea why. When I
say failing to print I mean that my computer thinks the file printed but
the printer shows no sign of ever having received it. The display of the
printer never changes to show that it is receiving or
Public bug reported:
ERROR: hook /usr/share/apport/package-hooks/source_nautilus.py crashed:
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/apport/report.py", line 205, in _run_hook
symb['add_info'](report, ui)
TypeError: add_info() takes 1 positional argument but 2
Public bug reported:
I would expect "journalctl -n1000 -r" to display the most recent 1000
log entries in reverse order.
Instead, what it appears to do is skip over the 1000 most recent log
entries and display the 1001st - 2000th log entries in reverse order.
ProblemType: Bug
DistroRelease:
Added hplip to the affects list for this bug because hpijs-ppds appears
to only be installing a few fax PPDs, not the full array of available
HPLIP PPDs.
** Tags added: cosmic
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
I was having this problem on Ubuntu 18.10 (WOW, THIS PROBLEM HAS BEEN
AROUND FOR A VERY LONG TIME) with my HP LaserJet 500 color M551 printer.
When I tried to install it, the driver that kept getting selected was
"HP LaserJet 500 color M551, driverless, cups-filters 1.21.3". This,
despite the fact
Public bug reported:
I ran `ubuntu-bug gnome-terminal`, but then realized a second or so
later that's not what I had intended to do. I therefore clicked the
Cancel button on the "Collecting problem information / Information is
being collected that may help the developers fix the problem you
Sorry, I misspoke above. I'm on 18.04, not 18.10. I've updated the
comment above to indicate this.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1799279
Title:
kernel update
Note that I got out of this by killing the update-secureboot-policy and
whiptail processes, and I did not get an error message from dpkg or dkms
after doing that, so the fact that the update-secureboot-policy and
whiptail commands exited with non-zero statuses was not detected.
Note also that I
Public bug reported:
I just ran `apt-get --auto-remove dist-upgrade` on 18.04.
It is hung on update-secureboot-policy waiting for confirmation from
whiptail.
apt-get --auto-remove dist-upgrade
|
-/usr/bin/dpkg --status-fd 80 --configure --pending
|
-/bin/sh
Public bug reported:
Since the beginning of time, the way to apply changes to one's group
memberships in UNIX has been to log out and log back in again.
In current Ubuntu, that doesn't work. When you add yourself to a group,
close all of your windows, log out, log back in again, and open a new
Thanks for your suggestions.
>The list of files you have tried didn't include
>$HOME/.config/gtkrc-2.0
>My own experimentation shows settings in this file take precedence over
>$HOME/.gtkrc-2.0
1) Just tried it, doesn't make any difference.
2) I actually tried running GnuCash under a debugger,
Note: GnuCash 3.0, when built from source, does not display the toolbar
correctly either.
When I run GtkInspector on GnuCash 3.0 (can't do it on Gnucash 2.7.19
because it's only available in gtk3) and examine the GtkSettings object,
it says that gtk-toolbar-style is set to both, as expected.
More info... I've confirmed that on 17.10, the toolbar style is
controlled by /org/gnome/desktop/interface/toolbar-style. When I edit
that setting in dconf-editor in 17.10, the change is reflected in the
open GnuCash window, but when I edit that exact same setting in dconf-
editor in 18.04, it has
Two additional notes:
1) This is not GnuCash-specific. You can see the same behavior in the
gtk-demo app included in gtk2.0-examples.
2) If I SSH into my Bionic box from a computer that's still on 17.10 and
run GnuCash on my 17.10 display over the X connection forwarded by SSH,
the toolbar are
Also tried putting `gtk-toolbar-style = GTK_TOOLBAR_BOTH` in
~/.gtkrc-2.0 and `[Settings]\ngtk-toolbar-style = GTK_TOOLBAR_BOTH` in
~/.config/gtk-3.0/settings.ini. The latter causes the output of gtk-
query-settings to change, but neither of these settings causes GnuCash
to behave differently.
Public bug reported:
I like big buttons with text labels below them in GnuCash toolbars.
Fortunately, that's exactly what I had in Ubuntu 17.10.
However, having upgraded to 18.04 this morning, suddenly the GnuCash
toolbars are back to being small buttons with no text labels.
There are SO MANY
Note: the problem is now even worse than what I reported above. If I put
"search kamens.us" in /etc/resolv.conf and then try to resolve "jik5",
"jik5.kamens.us", or "jik5.kamens.us.", all of which should resolve
successfully, they all fail with SERVFAIL.
--
You received this bug notification
I haven't changed /etc/systemd/resolved.conf.
Here's systemd-resolve --status
Global
DNS Domain: cnn.com
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
I uninstalled libnss-resolve and the problem persists:
$ sudo apt-get remove libnss-resolve
...
$ sudo systemd-resolve --flush-caches
$ host jik5
Host jik5.quantopian.com not found: 2(SERVFAIL)
$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#
In the absence of an explanation for why this bug should be closed when
it is in fact still a bug in 17.10, I'm once again reopening it.
Incidentally, even if it WERE correct to close the bug because it was
fixed, the correct status to use would be "Fix Committed" or "Fix
Released", not
I'm sorry, but I still don't understand what you're saying or what
you're doing.
It's reported fixed in earlier releases OF LVM2, not of Ubuntu. It has
not been fixed in Ubuntu, because Ubuntu hasn't upgraded the LVM2 it
ships to the newer release.
Furthermore, the project you keep marking
Upgrading lvm2 in Ubuntu to the current upstream release will address
this issue, according to a comment on the upstream bug I reported (link
above).
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lvm2 in Ubuntu.
Bug still exists in 17.10, not clear to me why you marked it invalid.
** Changed in: lvm2 (Ubuntu)
Status: Invalid => New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lvm2 in Ubuntu.
I mean, did you even check if the bug still existed in 17.10 before
marking it invalid?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lvm2 in Ubuntu.
https://bugs.launchpad.net/bugs/1705534
Title:
"lvs" exits with status
Public bug reported:
"gio open mailto:user@host; results in gio executing "thunderbird
mailto:///user@host;, which is wrong and causes the address that shows
up in the thunderbird composition window to start with three slashes
when it shouldn't.
Proof, from "strace gio open mailto:user@host;
** Attachment added: "strace when command fails"
https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1729012/+attachment/5001231/+files/failure.out
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to glib2.0 in Ubuntu.
Public bug reported:
I run "gio open /tmp/whatever.mp3". It silently does nothing, i.e., the
mp3 does not play, and yet exits with status 0. I run exactly the same
command again. It opens totem to play the mp3. This seems to be
repeatable: when I run the command repeatedly, it alternatives
I'm not sure, but this may qualify as `regression-release`, because I
actually use xdg-open to open mp3 files, which worked reliably in 17.04
but is failing in 17.10 because of this `gio open` problem.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
Public bug reported:
$ ubuntu-bug gnome-shell
This tool has been deprecated, use 'gio open' instead.
See 'gio help open' for more info.
Presumably it's using xdg-open and needs to stop doing that.
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: apport 2.20.7-0ubuntu3
ProcVersionSignature:
** Package changed: glibc (Ubuntu) => systemd (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1717015
Title:
libc resolver stops searching domain search list
Reported upstream as https://bugzilla.redhat.com/show_bug.cgi?id=1473392
.
** Bug watch added: Red Hat Bugzilla #1473392
https://bugzilla.redhat.com/show_bug.cgi?id=1473392
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
Public bug reported:
$ sudo lvs --noheadings -o vg_name /tmp
[sudo] password for jik:
"/tmp": Invalid path for Logical Volume.
$ echo $?
0
$
The exit status there after I've provided an invalid logical volume path
and the program has printed an error message clearly should not be 0.
1 - 100 of 140 matches
Mail list logo
