6.13 is out, too:
https://github.com/dave-theunsub/clamtk/releases/tag/v6.13
respectfully,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1939676
Title:
Scanning with clamtk does not work
Hi @John100,
Please try 6.13 from https://gitlab.com/dave_m/clamtk/-/wikis/Home .
I'm sorry, I don't control the Debian or Ubuntu repos.
Just download the latest deb, double-click to install.
respectfully,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs
Hi,
This was fixed several versions ago.
https://gitlab.com/dave_m/clamtk/-/wikis/Home
Follow the Downloads links, download the latest .deb, double-click to
install.
respectfully,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Hi,
Apparently this should be reassigned to the maintainer of this package.
See
https://bugs.launchpad.net/ubuntu/+source/clamtk/+bug/1895802/comments/1
.
Also, the 5.xx series is very old and should not be used.
Let me know if there are further questions.
respectfully,
Dave M
--
You
hedule a scan and signature update. If
any errors show up in the terminal window, please post them here.
This is actually the second report of the scheduler not working in
Ubuntu recently, so maybe we can figure this out.
respectfully,
Dave M
--
You received this bug notification because you
uotes). Then, go
to the Scheduler and try to schedule a scan and signature update. If
any errors show up in the terminal window, please post them here.
respectfully,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.
All,
This should be fixed in 6.06. If so, please close this report.
Thanks!
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1876497
Title:
clamtk scan checks ' Show Hidden Files ' checkbox
that and add clamtk 6.06 and clamtk-
gnome 0.05 from the Downloads page above, and use those.
Let me know if you have further questions.
respectfully,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1895802
@ipv,
Thank you for the feedback. I'm hoping to push 6.06 very soon.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1876497
Title:
clamtk scan checks ' Show Hidden Files ' checkbox automatically
6.05 history view
** Attachment added: "2020-08-17_04-55.png"
https://bugs.launchpad.net/clamtk/+bug/1876497/+attachment/5402113/+files/2020-08-17_04-55.png
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
@ipv (ipv),
I'm not sure why that's showing up like that. I'm attaching a screenshot of
6.05 where it shows a regular button, so hopefully when/if you upgrade it'll be
different.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
@Stephen Allen (stephen-d-allen),
Are you using snaps or debs? I'm wondering if the snap structure is
different and would account for you not having it in that location.
Can you try something like:
sudo dpkg -L clamtk
Thanks,
Dave M
--
You received this bug notification because you
Ok, on Ubuntu 18.04 it's this:
/usr/share/perl5/ClamTk/
I don't have 20.04 installed yet.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1876497
Title:
clamtk scan checks ' Show Hidden Files '
ld be line 610).
First, comment out lines 621, 622, and 623. Just put a "#" in front of
each line.
Then, insert a line at 620 like this:
$dialog->set_show_hidden( FALSE );
Save, and run.
If it works, I can push out 6.06 this week.
Thanks,
Dave M
--
You received this bug n
@Stephen Allen (stephen-d-allen),
clamtk-gnome version 0.05 has been released. Does that help?
https://gitlab.com/dave_m/clamtk/-/wikis/Downloads
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
@ipv (ipv),
I'm aware of the problem, but am unsure as to what causes it.
Still researching.
Thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1876497
Title:
clamtk scan checks ' Show Hidden
@wowo,
Just to clarify though - clamtk-gnome is version 0.05.
Also, clamtk 6.05 was released recently as well.
Please let me know if there are any further questions.
Thanks,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu
Hi,
The clamtk and clamtk-gnome packages are different. clamtk (6.03) is the
scanner gui, while the clamtk-gnome (0.05) adds the context menu/right
click functionality. It could be that 6.02 is the latest in the
repository, so it doesn't recognize 6.03. I think the better way to go
is to have
Hi,
This should be fixed in 6.03 and clamtk-gnome 0.05.
https://gitlab.com/dave_m/clamtk/-/wikis/Downloads
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1880770
Title:
GNOME (Nautilus)
Hi
I just realized why I never changed it to Application - because the
context menu won't show up. This would defeat its purpose of scanning
files/directories on right-click.
Does anyone know of a way to make this happen if changed to Application?
Thanks,
Dave M
--
You received this bug
ot;
Right? Also, this issue is actually with clamtk-kde, according to your
screenshot.
That's an easy fix, if I understand correctly. I'll get a new version
out (hopefully) this week.
Thanks,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hi,
Can you give some more information on this? Maybe this is my lack of
experience with Ubuntu, but I don't understand what the error is or how
it comes about. Does clamtk run?
Thanks,
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
This may have been fixed in version 0.05.
https://gitlab.com/dave_m/clamtk/-/wikis/Downloads
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1884822
Title:
nautilus search bar generates high cpu
Hi,
Has this ever happened before? Was anything else running at the time?
Also, can you do the following:
1. open a terminal window
2. type "clamtk" (no quotes)
3. run the same scan as earlier
4. if any messages appear in the terminal window, please post them back here
respectful
Hi,
Please remove/uninstall clamtk-nautilus and install clamtk-gnome if you
want that functionality:
https://github.com/dave-theunsub/clamtk-gnome
https://dave-theunsub.github.io/clamtk/
Those are instruction and download links.
respectfully
Dave M
--
You received this bug notification
Hi Hector,
Currently you can either:
1. Use a different theme
or
2. sudo apt-get install gnome-icon-theme-full
respectfully
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1548453
Title
Hi,
Let's try to troubleshoot then. Open a terminal window and type
clamtk without the quotes. Then try to update it like you normally
would. Please post back any messages that appear in the terminal
window.
Also, I may have missed it, but what version of ClamTk are you running?
Thanks,
Dave
Two more questions: *how* are you updating? Do you let freshclam do
its thing, or do you update from within the program?
Also, please paste the output of cat ~/.clamtk/prefs here.
Thanks,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
it - if not,
maybe someone else will and will coordinate with the upstream
maintainer.
Thanks,
Dave M
On Fri, Aug 1, 2014 at 5:10 AM, Silviu C. 1351...@bugs.launchpad.net wrote:
Public bug reported:
Please use the updated version. You're packaging 4.45 even for Utopic.
At this time, the current version
Problem still present in Ubuntu 14.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/995872
Title:
Can't set wacom tablet (pad) buttons with the GUI
To manage notifications about this bug go to:
Hi,
You can download the latest ClamTk here:
http://code.google.com/p/clamtk/
See if that helps.
Thanks,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/630565
Title:
Can not install
This says fix released, but I am still having no success getting audio
to work with my Bluetooth headset. When can I expect to actually be able
to use my headset? It's been about a year now for me that my Bluetooth
device suddenly stopped working because of this bug.
--
You received this bug
.
Thanks,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1050803
Title:
no antivirus search results such as ClamTK
To manage notifications about this bug go to:
https://bugs.launchpad.net
You're right again. The fix worked - see attached. I'll have the fix
in 4.43.
Thanks,
Dave M
** Attachment added: search for antivirus in Dash
https://bugs.launchpad.net/ubuntu/+source/clamtk/+bug/1050803/+attachment/3449873/+files/dash-search.png
--
You received this bug notification
Hi,
Where is the keyword used (as in, what file)? Would the control file
(under Description:) fix this? I would just as soon not change the
Comment line in the desktop as that is used for something else already.
Thanks,
Dave M
--
You received this bug notification because you are a member
Thanks Jeremy. I was completely unaware of the _Keywords directive.
I'm a little confused about the translations portion, as I've been
manually adding in translations for GenericName and Comment.
Anyway, I'll do some testing and see what happens.
Thanks again,
Dave M
--
You received this bug
be possible to update the GUI from a button.
The engine itself must be updated from Ubuntu.
Thanks,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/630565
Title:
Can not install updates
To manage
I also experience this problem, and I'm the author of the question
linked to on askUbuntu.com.
I have provided a great deal of information on the askUbuntu site, but
if there's anything particular that can help to resolve this bug here,
please let me know and I will provide it.
--
You received
Nobuto,
Please test this version:
http://clamtk.sf.net/test/clamtk-4.38.tar.gz
From a terminal window, type:
tar xf clamtk-4.38.tar.gz
cd clamtk-4.38
perl clamtk
It's set to run from the current directory - won't install anything.
Thanks,
Dave M
--
You received this bug notification because
Nobuto,
Thank you for reporting this. I'll test the quotes method in a variety
of locales to ensure there are no issues. Assuming all goes well, we'll
include this in version 4.38 and have it out shortly.
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs
I confirm that it does not work in Oneiric (11.10), the latest release.
I was not able to use gnome-alsamixer either. It installs but does not
do anything when I click the icon. No errors and no alsa mixer window...
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I did get alsamixer to work from the command line. Open the terminal and
type alsamixer at the prompt.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/483812
Title:
Pulseaudio will not route
Public bug reported:
sudo apt-get install skype
Click skype icon
Click call contact on skype test call contact
Call dialog box pops up with message problem with audio playback
No skype application shows up in pulse audio volume control dialog box.
** Affects: skype (Ubuntu)
Importance:
Confirming this bug on Audacious 2.4.4, Unity, 11.10 amd64 version.
Fresh install.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771360
Title:
Impossible to change playlist window size for
** Description changed:
Ubuntu Version 11.10, AMD64, all of the options in paprefs (except add
virtual output device for simultaneous output) are grey and can not be
selected. This was working on 9.04 and 10.04 (the only other versions I
have tested).
+
+ Also, the installer (apt-get
After I rebooted, the icon showed up in the menu. Not sure if that is a
bug or a feature. Seems like it should be there after the install is
complete. But I still can not select any of the options to share my
sound card.
--
You received this bug notification because you are a member of Ubuntu
Looks like a typo somewhere...
Workaround:
sudo ln -s /usr/lib/pulse-1.0 /usr/lib/pulse-1.0.0
Fixed it for me
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/885019
Title:
oneiric paprefs will
So I decided to see if this problem was related to the fact that I am
trying to load to a RAID array or maybe it is a problem with the new 3TB
drive that I am using. So I tried to do an install to a single drive
(/dev/sda). Once again it installs OK (no errors reported) but will not
boot from
** Description changed:
Installing to two new 3TB drives (/dev/sda and /dev/sdb). sda1 sdb1
- are 1Mb and flagged as boot, sda2 and sdb2 are 2992GB, flagged as RAID
- and assembled as RAID-1 array MD0. sda3 and sdb3 are 8GB swap.
+ are 1Mb and flagged as bios_grub, sda2 and sdb2 are 2992GB,
When I booted from the alt CD and selected boot from first hard disk I
ended up at the grub rescue prompt. So I rebooted again from the alt
CD and selected rescue a broken system. Ran grub-install and rebooted.
Still will not boot from /dev/sda. But now it will boot /dev/sda if I
first boot from
Public bug reported:
Ubuntu Version 11.10, AMD64, all of the options in paprefs (except add
virtual output device for simultaneous output) are grey and can not be
selected. This was working on 9.04 and 10.04 (the only other versions I
have tested).
** Affects: paprefs (Ubuntu)
Importance:
After I re-installed with UEFI enabled I could still not boot. But I
found that I could boot using the alternate CD's boot from first hard
disk option. So it looks like maybe the install process did not write
the boot tracks to either of my drives. I tried using grub-install from
the command
i think I am using GPT. Not sure about BIOS or EFI. How can I tell?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/883720
Title:
oneiric fresh install to raid1 from alt amd64 CD - grub-install
My motherboard is an Intel DG33FB. My BIOS version is
DPP3510.86A.0484.2008.0805.2031.
UEFI boot was disabled in the BIOS settings so I enabled it. I no longer
get the failure when GRUB installs. But the system still will not boot
after the installation is complete. No error messages, just the
Public bug reported:
Installing to two new 3TB drives (/dev/sda and /dev/sdb). installer
works OK up to the point where it installs the GRUB boot loader to
/dev/sda. Then it fails with the message grub-install /dev/sda failed.
Retry fails again. Continue without boot loader shows no more errors
** Description changed:
- Installing to two new 3TB drives (/dev/sda and /dev/sdb). installer
- works OK up to the point where it installs the GRUB boot loader to
- /dev/sda. Then it fails with the message grub-install /dev/sda failed.
- Retry fails again. Continue without boot loader shows no
@dino99, are you still having trouble with this?
Thanks,
Dave M
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/366572
Title:
Clam TK can't find virus definitions
To manage notifications about
I've solved this problem for me.
Following information here:
http://ubuntuforums.org/showthread.php?t=1487447
Basically I removed all Japanese fonts listed as installed in Synaptic, and
then installed only these:
ttf-kochi-mincho-naga10
ttf-kochi-gothic-naga10
ttf-sazanami-gothic
Closing this bug. No one seemed to have the same problem, and I replaced
the scanner, so I can't contribute anything.
It was very likely the scanner failed coincidentally at the same time as
the upgrade.
** Changed in: xsane (Ubuntu)
Status: New = Invalid
--
You received this bug
This problem has been resolved for me. I can't say which upgrade solved
it, but since reporting it and updating my system many times, the issue
no longer happens.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Era,
Thank you for responding. however, how do I determine which font is
broken?
For example, in Firefox, I have my default font set to Meiryo UI,
which is a Microsoft font I know works. However, web pages set their own
fonts, and so sometimes when it uses my default things display
correctly,
Hi Michael,
I don't think this is a ClamTk bug. It looks like ClamAV did not fully
install or get properly configured.
I recommend either re-assigning this to ClamAV or (probably simpler) try
to reinstall ClamAV. You may have to remove ClamAV and then re-install
it.
Thanks,
Dave M
--
You
** Changed in: clamtk (Ubuntu)
Status: New = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/798235
Title:
package clamav-base 0.97 dfsg-2ubuntu1 failed to install/upgrade:
I would like to reopen this bug. I am not sure about the process for
doing so, so forgive me if I'm not doing this right.
I am using Ubuntu 11.04, ibus/anthy. However, I also experienced this
problem in Ubuntu 10.04, Ubuntu 10.10, and also in UIM/Anthy.
It has come and gone, sometimes by
Public bug reported:
Binary package hint: nautilus
I have some external drives that are mounted by NFS over a LAN.
If I view the drive/folder in Nautilus, and select any number of files
(1 or more), and then delete that file by any method (press delete key,
use a drop down menu, right click and
I followed the instructions for strace, and was able to reproduce the
problem while strace was running.
The log file it created, though was 31.2 MB in size, though. While it
was running, it was streaming output at the command line at an
incredibly fast rate.
In any case, while strace was
This has not affected me since 10.10. I believe that I also manually re-
installed Plymouth in order to get proper functionality in 10.04.
Sorry for not reporting earlier.
Thank you for your time and help.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
The GUI version is up-to-date, but ClamAV released a new version of the
scanner. Ubuntu will release it when they can or when available - it
will be available through normal update channels.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Hello. I started a thread some time ago on the Ubuntu forums about this issue:
http://ubuntuforums.org/showthread.php?t=1596603page=2
Through responses on that thread, I eventually came here.
I have two computers, and on one this bug seems to no longer be an
issue. However, on my other computer,
** Changed in: clamtk (Ubuntu)
Status: New = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/695138
Title:
Ubuntu 10.10 screensaver does not work when ClamTK is installed.
--
ClamTk should have no impact on the screensaver and I am unable to
duplicate this problem. I have both Ubuntu 10.04 and 10.10 in virtual
machines, and the screensaver works fine with ClamTk installed.
I'm happy to help, but I'm not an Ubuntu expert - so if anyone out there
wants to help
Right! Instead, is there anything beneath ~/.clamtk/viruses?
$ ls ~/.clamtk/viruses/
Thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/693930
Title:
clamtk fails to start: Reading from
Hi,
Thanks for responding. I have been trying to duplicate the crash, but
without luck. I'm unsure as to why there are directories there (as
ClamTk should only look at regular files), but it would explain why
there is a problem.
I will add another check in that process to ensure the area(s)
Hi James,
Glad to hear the problem is gone. But after looking at the output you
posted, are those really directories? Maybe they are, but you're
getting permissions errors there, which is weird. Did you run ClamTk as
root (or sudo, whatever)? Just wondering.
Thanks
--
You received this bug
Hi,
Check under Quarantine, then Maintenance. Also, can you post or
email me the contents of the file ~/.clamtk/restore ?
$ cat ~/.clamtk/restore
Thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi,
The first thing that sticks out is that there is no s.pm file in
ClamTk. Was that copied and pasted right? I'm guessing that it is
supposed to be Prefs.pm. Have you quarantined any files?
Also, can you try upgrading to 4.30 to see if the problem still exists?
Thanks,
--
You received
Public bug reported:
Binary package hint: empathy
Initiating any Video Call or Voice call to a Yahoo contact results in
being disconnected from Yahoo.
That status says, No Reason for the disconnect.
I am using Microsoft LifeCam webcam. Ubuntu 10.10
ProblemType: Bug
DistroRelease: Ubuntu 10.10
--
Yahoo disconnects when requesting Video Call
https://bugs.launchpad.net/bugs/669995
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Thanks for the quick response.
Is there any webcam support in Empathy -- for Yahoo or other IM
protocols (gtalk, msn?)
Regards,
Dave
On 11/02/2010 09:22 AM, Omer Akram wrote:
thats because yahoo a/v calling is not supported in empathy and the fact
that empathy is showing calling
All mime-type associations have been removed as of 4.29, so the problem
should no longer occur.
--
Thunderbird starts virusscan instead of the right application when opening
attachments
https://bugs.launchpad.net/bugs/487057
You received this bug notification because you are a member of Ubuntu
Are you saying you uninstalled clamtk and there's still a right-click
action trying to send the pdf to clamtk?
Can you run sudo update-desktop-database from a terminal window, or at
least log out and log back in and see if the problem still persists?
It's possible that the uninstall process isn't
Public bug reported:
Binary package hint: thunderbird
Since yesterday, 17 Aug, ALL incoming emails are sent to the junk folder.
This includes messages sent to individual folders by rules.
Ubuntu 9.10
ProblemType: Bug
Architecture: i386
CheckboxSubmission: cc72ddced24fe5b52115c4207128edcb
** Attachment added: XsessionErrors.txt
https://bugs.launchpad.net/bugs/619815/+attachment/1497754/+files/XsessionErrors.txt
--
all messages sent to junk, even if rules send them to individual folders
https://bugs.launchpad.net/bugs/619815
You received this bug notification because you are
Dave M wrote:
Public bug reported:
Binary package hint: thunderbird
Since yesterday, 17 Aug, ALL incoming emails are sent to the junk folder.
This includes messages sent to individual folders by rules.
Ubuntu 9.10
ProblemType: Bug
Architecture: i386
CheckboxSubmission
Confirmed the problem on another system with Ubuntu V9.04
--
Targus model PAUM30U USB wireless presentation mouse will not work
https://bugs.launchpad.net/bugs/612068
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
Binary package hint: xorg
This may or may not be a problem with XORG. Looking at some of the past
USB mouse bugs, some of the were fixed in the kernel. But I do not know
how to figure out exactly where the problem is.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package:
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/52784436/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/52784437/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/52784438/Dependencies.txt
**
Just a note that the Targus mouse is the Agiler usb device:
Bus 003 Device 003: ID 05b8:3100 Agiler, Inc.
--
Targus model PAUM30U USB wireless presentation mouse will not work
https://bugs.launchpad.net/bugs/612068
You received this bug notification because you are a member of Ubuntu
Bugs,
I've never used cryptkeeper, to be honest. But I'm assuming based on
its name that it encrypts certain directories. Can you try whitelisting
the directories that are encrypted, and re-run the scan? Go under
Advanced, Preferences, and select the Whitelist tab.
Thanks,
dave
--
clamtk assert
Yes, it turns out Inkscape was incompatible with clipboard manager that
I was running.
Unfortunately, I've lost the name of the particular clipboard app I was
running. However, since uninstalling it, Inkscape has resumed normal
copy/paste action.
Thank you for your time and help.
--
Paste does
I have had this problem since I started using SAMBA in v6.06, I am now
using v10.04 and configuring SAMBA is still a problem. Getting the
computers to discover each other, so they are listed in Places-Network
is a pain. Sometimes it works. Sometimes it works after a long delay and
sometimes they
I have had this problem since I started using SAMBA in v6.06, I am now
using v10.04 and configuring SAMBA is still a problem. Getting the
computers to discover each other, so they are listed in Places-Network
is a pain. Sometimes it works. Sometimes it works after a long delay and
sometimes they
As of June 22, I am experiencing a bug that seems to essentially be the
same as this.
My applet icons in the top right of my Gnome panel are offered in a new
random order with each boot. There are sometimes gaps, sometimes
overlaps, and sometimes certain applet icons don't appear at all.
Most
Public bug reported:
Ubuntu 10.04
Kernel Linux 2.6.32-23-generic
Gnome 2.30.0
Memory 3.4 GB
Intel Core 2 Quad CPU 2.66Ghz
When I boot Ubuntu, I get ugly text and no splash screen. The same is
true when shutting down. Further, about 50% of the time when shutting
down, the the computer will not
** Attachment added: Screenshot of where the shut down process stops
http://launchpadlibrarian.net/50577416/2010-06-18%2023.06.28.jpg
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/50577064/Dependencies.txt
--
Ugly Text Screens while booting, sometimes does not shut
Jeremy,
Thank you for your assistance and explanations.
Since reporting this bug, I have upgraded to the 2.6.32-23 kernel, and
the Glasen Intel video drivers have also been updated.
Since this upgrades, the system has become more stable. Unfortunately, I
can not be sure exactly what was the
Jeremy,
Thank you for responding.
I just want to be absolutely sure I go about this carefully, as it seems
to me changing kernels is dangerous, especially considering I am an end
user with a limited understanding of the issues.
The link you pointed to only makes reference to Mainline kernels,
Public bug reported:
First, I am not sure if Gnome is really the problem. However, because Ubuntu's
byzantine bug reporting system does not give one the option of reporting a bug
without first declaring which package is at fault, I had to pick at something.
I chose Gnome because it was the
I am a fairly technically oriented user and still can not figure out how
to get this to work. Something so obviously useful should not be
obfuscated deep in the user interface. Recording from the master output
should be readily visible to even a casual user.
--
Cannot record from master output
Hello,
Sorry, my system became so unstable that I reformatted and regressed
back to Ubuntu 9.10.
I will upgrade to 10.4 when it moves out of beta. If I have any more
kernel issues then, I will report them here.
Thank you for your time and effort in developing Ubuntu.
--
Crash with broken
1 - 100 of 221 matches
Mail list logo
