Paul Webster wrote:
> Do you have number keys on your remote?
> If yes ... try "1" for the first favourite ... "2" for the second.
> I might have misremembered ... and they might be the "presets" but you
> can check by setting presets as well
At the moment the remote I'm using don't have any
Do you have number keys on your remote?
If yes ... try "1" for the first favourite ... "2" for the second.
I might have misremembered ... and they might be the "presets" but you
can check by setting presets as well
Paul Webster
author of \"now playing\" plugins covering radio france (fip
Paul Webster wrote:
> Interactively, it is very easy ... but then you can see what it is
> doing.
>
> However, there are CLI commands to tell LMS to play a favourite.
>
> from the docs
> >
Code:
> >
> Request: "6e:ef:54:e9:02:b0 favorites playlist play
PaulH wrote:
>
> Is there no possibility to change the radio station by remote ?
Interactively, it is very easy ... but then you can see what it is
doing.
However, there are CLI commands to tell LMS to play a favourite.
from the docs
Code:
Request:
wondroushippo wrote:
> It seems like based on my searching that nobody has tried it, but figure
> I'd ask here: has anyone configured the Argon One IR remote in the Argon
> One case to work with pCP? I've found instructions on how to install the
> scripts (can't link due to being a newbie), and
It seems like based on my searching that nobody has tried it, but figure
I'd ask here: has anyone configured the Argon One IR remote in the Argon
One case to work with pCP? I've found instructions on how to install the
scripts (can't link due to being a newbie), and link to the info for the
IR
Jeff07971 wrote:
> All Jivelite commands are here
>
> https://github.com/ralph-irving/tcz-lirc/blob/master/jivekeys.csv
>
>
> Jeff
Found only next track but it's not working on favorites
PaulH's Profile:
All Jivelite commands are here
https://github.com/ralph-irving/tcz-lirc/blob/master/jivekeys.csv
Jeff
*Want a webapp ?* Get SqueezeLite-X !
https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X=903953=1#post903953
Is there any command to do:
NEXT FAVORITE and PREV FAVORITE ?
Thanks
PaulH's Profile: http://forums.slimdevices.com/member.php?userid=72449
View this thread: http://forums.slimdevices.com/showthread.php?t=108410
themetman wrote:
> OK, I do not have the screen, but the remote should work.
>
> I thank you for trying so much on my behalf. I am using the HiFiBerry
> Amp, I have checked the pinouts, no conflict.
>
> I will just have to do without for now.
>
> Regards to all who helped.
Are you using a
OK, I do not have the screen, but the remote should work.
I thank you for trying so much on my behalf. I am using the HiFiBerry
Amp, I have checked the pinouts, no conflict.
I will just have to do without for now.
Regards to all who helped.
Perfect in every way, Modest and Misunderstood!
themetman wrote:
> I have moved it to GPIO24 (Pin 18) still no good.
Worked first time here !
32191
Jeff
+---+
|Filename: 20-11-15 15-05-50 2255.jpg |
|Download:
I have moved it to GPIO24 (Pin 18) still no good.
Perfect in every way, Modest and Misunderstood!
themetman's Profile: http://forums.slimdevices.com/member.php?userid=70203
View this thread:
themetman wrote:
> @Jeff07971 OK, fresh install of 6.1.0 upgraded everything installed the
> Jivelite and IR Keytables, I have a green tick for the IR Keytables, but
> still no response to the remote.
Well I never had any problems with pCP 6.1.0 / Jivelite it has always
been plug and play with
Jeff07971 wrote:
> IR-Keytables is for Jivelite
>
> LIRC is for Squeezelite
>
> Install clean and config Jivelite and IR-Keytables
>
> This will prove everything except software if it works
>
> Jeff
@Jeff07971 OK, fresh install of 6.1.0 upgraded everything installed the
Jivelite and IR
themetman wrote:
> I have removed the LIRC installed Jivelite, but still nothing. I have
> checked the Hardware again, I have continuity from the bottom of the
> GPIO Pins on the Pi Board to the pins on the IR Sensor. I have tried
> three different sensors, still no good.
IR-Keytables is for
Jeff07971 wrote:
> Have you tried setting up jivelite ?
>
> If it works with Jivelite (IR-Keytables) then you know the receiver and
> GPIO are all working and its a software/config problem
>
> Jeff
I have removed the LIRC installed Jivelite, but still nothing. I have
checked the Hardware
themetman wrote:
> OK, well that is reassuring.
> Here is a link to the 'datasheet'
> (https://docs.rs-online.com/4686/0900766b813e47e8.pdf) of the IR
> receiver. Do I have the correct device?
Have you tried setting up jivelite ?
If it works with Jivelite (IR-Keytables) then you know the
themetman wrote:
> OK, well that is reassuring.
> Here is a link to the 'datasheet'
> (https://docs.rs-online.com/4686/0900766b813e47e8.pdf) of the IR
> receiver. Do I have the correct device?
Yes thats the one I always use TSOP38438
Jeff
*Want a webapp ?* Get SqueezeLite-X !
OK, well that is reassuring.
Here is a link to the 'datasheet'
(https://docs.rs-online.com/4686/0900766b813e47e8.pdf) of the IR
receiver. Do I have the correct device?
Perfect in every way, Modest and Misunderstood!
themetman wrote:
> @Jeff07971 and @ralphy Should there be a kernel module loaded? here is
> the output of lsmon
> >
Code:
> > Module Size Used by
> evdev 24576 0
> snd_soc_pcm512x_i2c16384 1
> snd_soc_pcm512x32768
@Jeff07971 and @ralphy Should there be a kernel module loaded? here is
the output of lsmon
Code:
Module Size Used by
evdev 24576 0
snd_soc_pcm512x_i2c16384 1
snd_soc_pcm512x32768 1 snd_soc_pcm512x_i2c
spidev
themetman wrote:
> Yes pin 22 GPIO25 with Grnd next to it on Pin 20 and 3.3v on pin 17
Yes they are the pins I use most of the time but I use Jivelite with
IR-Keytables
I used to use lirc with Jivelite before it was "officially" in pCP and
never had any problems.
Not sure what to suggest I'm
Jeff07971 wrote:
> fyi
>
> 32125
Yes pin 22 GPIO25 with Grnd next to it on Pin 20 and 3.3v on pin 17
Perfect in every way, Modest and Misunderstood!
themetman's Profile:
ralphy wrote:
> what pin do you have the ir connected? Gpio 25 is 'pin 22'
> (https://github.com/ralph-irving/tcz-lirc/blob/master/raspberry-pi-gpio-layout-revision-2.png).
fyi
32125
+---+
|Filename: 2020-11-11
themetman wrote:
> OK, @ralphy still no good, so did fresh install of version 6.1.0,
> configured the IR as default:
>
> I have not updated the system yet.
>
> I am using the Basic Player, not the server or Beta and I do not have
> LMS active on this player.
>
> Then ssh into the system
>
>
ralphy wrote:
> You need to Install LIRC for squeezelite if you want the remote to
> control squeezelite headless ie. not running jivelite.
>
> You are using the configuration file for lircd not the client. It
> should be /home/tc/.lircrc which is installed as part of the LIRC setup.
Now it
OK, @ralphy still no good, so did fresh install of version 6.1.0,
configured the IR as default:
I have not updated the system yet.
I am using the Basic Player, not the server or Beta and I do not have
LMS active on this player.
Then ssh into the system
Code:
grep ir
themetman wrote:
> OK, I do have an oscilloscope, so will get it out in the next day or
> so.
> Thanks for the ideas.
Before you dig it out, confirm that config.txt has the correct pin for
your setup.
Code:
tc@rpi3p:~$ *m1*
tc@rpi3p:~$ *c1*
OK, I do have an oscilloscope, so will get it out in the next day or
so.
Thanks for the ideas.
Perfect in every way, Modest and Misunderstood!
themetman's Profile: http://forums.slimdevices.com/member.php?userid=70203
themetman wrote:
> Woops! My error, I definitely have Pin3 on 3.3v adn Pin 1 Out to GPIO17
> Sorry
Do you have an oscilloscope to check the signal ? If not you can usually
see a change with a DVM. The modulation is slight but detectable.
The TSOP38348 is open collector output so should sit at
Jeff07971 wrote:
> Pin 1 on the TSOP38438 is signal out and should not go to +3v3
>
> 32101
>
> Jeff
Woops! My error, I definitely have Pin3 on 3.3v adn Pin 1 Out to GPIO17
Sorry
Perfect in every way, Modest and Misunderstood!
themetman wrote:
> I cannot get mine to work on a Pi4
> I am using the JustBoom IR Remote with a TSOP38438, 38kHz IR Receiver
> Pin1 to +3.3v, Pin2 to Gnd and Pin 3 to GPIO17. I am not using Juvelite,
> just a headless Pi with HiFiBerry Amp. I have installed the lirc0 from
> the IR Page and
I cannot get mine to work on a Pi4
I am using the JustBoom IR Remote with a TSOP38438, 38kHz IR Receiver
Pin1 to +3.3v, Pin2 to Gnd and Pin 3 to GPIO17. I am not using Juvelite,
just a headless Pi with HiFiBerry Amp. I have installed the lirc0 from
the IR Page and have a green tick.
>From 'here'
seekasoul wrote:
> Sure, this is what I have in the Tweaks:
> Running:
>
> */usr/local/bin/squeezelite -n piCorePlayer -o
> hw:CARD=sndrpihifiberry,DEV=0 -a 80 4 1 -c
> pcm,flac,mp3,aac,ogg,dsd,wma,alac -p 45 -m dc a6 32 00 5f 86 -s
> 192.168.22.100 -v -W -V Master -D -i
Paul Webster wrote:
> Have you enabled IR in the pCP Tweaks page and the IR page.
Sure, this is what I have in the Tweaks:
32081
32082
+---+
|Filename: lirc1.JPG|
|Download:
seekasoul wrote:
>
> What I am missing?
>
Have you enabled IR in the pCP Tweaks page and the IR page.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc australia, cbc/radio-canada and rte ireland
I cannot use this remote with LMS 8.0.0 on pCP .
irw gives me correct ouput messages but LMS does not seem to receive IR
keys at all...
32080
What I am missing?
Running on:
RPi4 with IS2 hat DAC OSA Electronics DACBerry ONE+
piCorePlayer v6.1.0 | linux 4.19.122-rt52-pcpAudioCore_v8
strebor56 wrote:
> I just put together a pCP instance for use on the new patio utilizing a
> Justboom amp with their provided IR
> receiver chip and remote.
> The only markings on the chip is '56' now I presume that's a 56kHz
> carrier not the usual 38.
> Q. Is the carrier frequency reflected
i use a couple of Justboom's with IR. On mine, there is no special
setup, that's why I use them.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread:
I just put together a pCP instance for use on the new patio utilizing a
Justboom amp with their provided IR
receiver chip and remote.
The only markings on the chip is '56' now I presume that's a 56kHz
carrier not the usual 38.
Q. Is the carrier frequency reflected in the config file?
Regards
Now it works!
THANKS! :)
imi11's Profile: http://forums.slimdevices.com/member.php?userid=70855
View this thread: http://forums.slimdevices.com/showthread.php?t=108410
___
unix
Jeff07971 wrote:
> Use a 38Khz type IR Receiver, Examples being TSOP38238 and TSOP38438
> (There are other types that work fine) I personally use the TSOP38438
>
> https://www.vishay.com/search?searchChoice=part=tsop38438
>
> Wire this to 0V (Pin 20), +3v3 (Pin17) and GPIO25 (Pin 22) and then
imi11 wrote:
> Which receiver should I use?
Use a 38Khz type IR Receiver, Examples being TSOP38238 and TSOP38438
(There are other types that work fine) I personally use the TSOP38438
https://www.vishay.com/search?searchChoice=part=tsop38438
Wire this to 0V (Pin 20), +3v3 (Pin17) and GPIO25
paul- wrote:
> The Squeezebox remote should have worked without modifications.
Which receiver should I use?
imi11's Profile: http://forums.slimdevices.com/member.php?userid=70855
View this thread:
The Squeezebox remote should have worked without modifications.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I have this kind of pc remote:
https://www.aliexpress.com/item/32768227947.html
imi11's Profile: http://forums.slimdevices.com/member.php?userid=70855
View this thread:
Hello,
I use picoreplayer with jivelite. I use universal pc remote.
The player works with this remote with jivelite and with lirc ir setup
either.
BUT I would like to use my original squeezebox touch remote and I'm not
able to set it up.
1. Is the linked remote's usb receiver good to receive
paul- wrote:
> Not a previously known issue, but it is now.
>
> You will need to ssh in, and edit the file
>
> /usr/local/etc/pcp/pcp.cfg
>
> Set these two variables to no.
>
> IR_LIRC="no"
> IR_KEYTABLES="no"Thank you! I had one of these Sunfounder IR receiver modules
> left over,
which
Not a previously known issue, but it is now.
You will need to ssh in, and edit the file
/usr/local/etc/pcp/pcp.cfg
Set these two variables to no.
IR_LIRC="no"
IR_KEYTABLES="no"
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please
Hello,
after un-installing the lirc and keytables support, my pcp still only
offers the uninstall buttons and I cannot install the keytables support,
again.
Is this a known problem? Can I fix this somehow, e.g. by manually
installing stuff?
Any help would be great!
Frank
Thanks Paul... makes sense. :D
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=108410
Its that lirc and jivelite uses different config files than lirc and
squeezelite .so when we install LIRC, we need to know if Jivelite is
there or not.
Perhaps we need to add a toggle in the LIRC configuration.
hi Zounder1,
Thanks for reporting your findings.
Something to consider, piCorePlayer is memory based so, each time you
reboot everything gets freshly reinstalled. The order things get
reloaded, while not random, is unlikely to be the same as the initial
install.
My guess is we have forgotten
I just want to circle back on this. I finally had a chance to work on
getting IR remote working with my picoreplayer install.
THE FOLLOWING INSTALL ORDER WORKED PERFECTLY:
Fresh install.
Install and configure jivelite
Install lirc
Set lirc to use lirc1 (my old usb IR receiver uses lirc1)
ralphy wrote:
> When using a slimdevices remote, squeezelite only needs an empty lirc.
>
> For pcp 3.2x, If you've enabled lirc from the tweaks tab without
> jivelite installed you should already have a zero byte .lircrc file in
> tc's home directory.
>
> tc@rpi2:~$ ls -l /home/tc/.lircrc
>
When using a slimdevices remote, squeezelite only needs an empty lirc.
For pcp 3.2x, If you've enabled lirc from the tweaks tab without
jivelite installed you should already have a zero byte .lircrc file in
tc's home directory.
tc@rpi2:~$ ls -l /home/tc/.lircrc
-rw-r--r--1 tc staff
Zounder1 wrote:
> Hi,
> I'm troubleshooting getting IR working in PiCorePlayer. (It was working
> but I just did an upgrade to the newest PiCorePlayer version out.
>
> I installed LIRC using the web interface. I manually set it to use
> LIRC1. Reboot.
>
> When I go to command line and run
58 matches
Mail list logo