I install picoreplayer 6.00 in PI4 (4g ram)
I want to Max the output volume in USB port to my USB DAC
I can success to change the volume but cannot save on my sccard. ( once
I turn off the power in my Pi.4 , setting will lose I need to redo
again ) but as before I can save it on
billmr wrote:
> I upgraded a pi3b and I cannot get usb dac to work, I have tried 2
> different dac and it recognizes both of them (fiio and hifime)
>
> but there is no sound output through either one.
>
> this may be separate issue, the Built-in Audio works, but if I disable
> it the
is the OLED I2C or SPI
check the appropriate interfaces are enabled in config.txt
Code:
$ m1
$ c1
$ vicfg
look for the line starting
DTPARAM=I2C_ARM=ON,SPI=ON,I2S=ON
and ensure switches are all on
$ pcp bu
$ pcp rb
I need to go
I upgraded a pi3b and I cannot get usb dac to work, I have tried 2
different dac and it recognizes both of them (fiio and hifime)
but there is no sound output through either one.
this may be separate issue, the Built-in Audio works, but if I disable
it the picoreplayer will not start
I've set both switches. Still the same. See attachments...
+---+
|Filename: Various.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29826|
Quite a lot of your concerns shouldn't actually be a problem.
Regarding network, you just expose the appropriate ports from the
container to the 'host'. Then all devices would use the 'host' IP
address to communicate with the server. Not sure if that would prevent
auto discovery from working,
I am a getting this now:
tc@pCP:~$ cd /mnt/mmcblk0p2/tce
tc@pCP:/mnt/mmcblk0p2/tce$ ./gomonitor sa
killall: lmsmonitor: no process killed
kill: sending signal to 9759 failed: No such process
Start LMSMonitor. Player: pCP
sudo cp /mnt/mmcblk0p2/tce/libArduiPi_OLED.so.1 /lib/
sudo
htctyo wrote:
>
>
>
> Putty I type , in Picoreplayer 5.0 is workable. But in Picoreplayer 6
> doesn't save.
> ***@piCorePlayer:~$ sudo alsactl store
> ***@piCorePlayer:~$ sudo filetool.sh -b
After making the alsamixer setting return to the pCP web gui and
Under
> Audio output device
the visualizer uses shared memory
you need to set a couple of switches via the squeezelite setting web
form
specifics are outlined in the repo readme
Code:
PREREQUISITES
If you are intending to consume visualization data you need to configure
squeezelite to expose
In Beta mode on Main page near the bottom.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105
View this thread:
My setup is all x86, and I have no real experience of what would need to
be 'build' for Arm. Would need a bit of assistance with that if it ever
got that far.
If an image should do it for all, then it'll become difficult. We do
provide binaries for some platforms. But you'd have to pick a
Okay - probably me being even denser than usual ...
Is there a setting to fix an ip address?
LMS server: O2 Joggler with Jivelite
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Wigster wrote:
> Hi,
>
> Coming back to my post #77. I've been talking to bpa on his iPlayer
> forum 'here'
> (https://forums.slimdevices.com/showthread.php?109826-BBCiPlayer-V1-6-(and-higher)-amp-BBCiPlayerExtra-2-0-(and-higher)-Support=968987=1#post968987)
>
> and we have isolated the issue
Wigster wrote:
> I have switched my router's WiFi from channel 11 to channel 10 and the
> problems have gone away. I don't recall switching the channels in the
> last couple of weeks, so somehow this is still possibly related to the
> PCP 5>6 upgrade, but maybe it;s just a HiFiBerry problem!
Can you point me to 'definitive' install instructions @mherger ?
Also in a list of paths that should possibly be exported from the
container.
Andy
adhawkins's Profile: http://forums.slimdevices.com/member.php?userid=650
Can you point me to 'definitive' install instructions @mherger ?
No, because they don't exist. What would you want to know specifically?
I mean, you could stick with some Debian based base system. But that you
don't want because of its size. And with Alpine you're on your own.
Also in a
Paul Webster wrote:
> In Beta mode on Main page near the bottom.
Found it - but there's no way to specify an actual address - just 2
buttons ?
LMS server: O2 Joggler with Jivelite
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM
paul- wrote:
> That worked, unfortunately it's all normal. Need to see what things
> look like after a crash. My guess is that the BBC player is somehow
> hanging blocking the network. You might post something over in the
> plugin thread, as bpa might offer some better way to troubleshoot.
Hi all
First thank you for piCorePlayer !!
I updated today pCP to version 6.0 and I am experiencing an issue.
I can not access to the picoreplayer tab :lms.cgi, it's like charging
but not responding (I tried on several browser and reboot twice LMS)
I can access to LMS (7.9.2) via the ip address
No idea, but there is a log
29832
but I think this is only after the update
It is possible to do a new update over the one you have just done (i
have just done that myself, to look for logs)
Otherwise wait until someone who knows what they are doing comes along
:)
you can check the boot log
Pretty much, how to get from a git checkout to a running system.
Appreciate you can't provide specific instructions for Alpine, but
something along the lines of 'check out this directory, make sure perl
and these modules are installed, run the service' etc.
As you say, I guess I could just go
after a bit of digging it looks like the bcm2835 driver code needs to be
updated
really not sure why it didn't complain on my builds???
I'll post back when a new build is submitted to the repo
As of 03/23/2020
*Total Tracks: 144,246
Total Albums: 13,157
Total Artists: 17,787
Total Genres:
Man in a van wrote:
> With a dac plugged into the pi, reboot
>
>
>
>
> On the Squeezelite tab (in beta mode)
>
> go to
>
>
>
> Reboot
>
> return to the Squeezelite page
>
> Go to
>
>
>
> click on
>
>
>
> select an output from the list
>
> 29831
>
> click on
>
>
>
>
slimhase wrote:
> I am getting there...
> I used the alpha04_USB image and added the phone-fix: in
> /etc/modprobe.d: File of1-stac9202.conf - add
> Code:
> options snd-hda-intel position_fix=1 bdl_pos_adj=64
> patch=of1-stac9202.patch
>
> Next: Expand drive and install LMS.
>
> Great work
Here is a blog post about hifiberry interfering with Wifi signal
https://www.tablix.org/~avian/blog/archives/2016/12/hifiberry_and_wi_fi_interference/
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
I cannot follow what you are asking, is your plan to start from complete
scratch If you don't want to use any pre-compiled binaries, then
you need to look at a different repo too.
This is the main server: https://github.com/Logitech/slimserver
Everything under /Bin and /CPAN/arch, are
Hi Man in a Van,
thanks for your reply.
How do you access to the log?
I have these tabs when I access to the picore player ip address
29833
I will try a new clean install later today, just to check
Cheers
+---+
|Filename:
If you have network shares setup, this sometimes will cause delays if
the network server is not responding.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
It's not a dropdown. Expand themore> tag.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
billmr wrote:
> thanks, however it will not let me change the output setting and there
> is no dropdown list
Got it, somehow the EQ was on, I turned it off I got the dropdown and
and was able to select the hw fio dac
THANKS
Pretty much, how to get from a git checkout to a running system.
Ok, then your best bet would probably be getting Perl 5.28 on that
system. Because we have binaries for it on x86_64, armhf, and aarch64.
The Debian build file lists the following dependencies:
libc6, libgcc1, libstdc++6,
Thanks shunte88 !!! I'll keep on waiting for the new build... thanks in
advance...!
shunte88 wrote:
> after a bit of digging it looks like the bcm2835 driver code needs to be
> updated
> really not sure why it didn't complain on my builds???
> I'll post back when a new build is submitted to
Last week I had a play with this (using a 16gb usb stick)
https://www.jogglerwiki.com/forum/viewtopic.php?f=2=5038
I gave up, as it was not simple enough for this bear of little brain.:(
I returned to
https://www.jogglerwiki.com/forum/viewtopic.php?f=2=4519
The Kernel 3.16 version did not
Themightybob wrote:
> Hi Man in a Van,
>
> thanks for your reply.
>
> How do you access to the log?
>
>
> I will try a new clean install later today, just to check
>
> Cheers
Main page > scroll down to Diagnostics
ronnie
Please note: In Squeezelite settings I am using the Output as:
*hw:CARD=sndrpihifiberry*
The DAC is connected via Coaxial (digital) cable to my Amplifier.
tc@pCP:~$ aplay -l
List of PLAYBACK Hardware Devices
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Had a clean upgrade on the pi connected to my USB DAC, but I can't get
bluetooth working on my piZero
Tried an upgrade and I've now switched to a clean install
Installed the Bluetooth support and rebooted - then enabled bluetooth
and paired with the speaker without issues.
Under the "Audio
Can't see the BTSpeaker device I used to see under version 5.0
tc@piCorePlayer:~$ /usr/local/bin/squeezelite -l
Output devices:
null - Discard all samples (playback) or
generate zero samples (capture)
default
plugequal
equal
fabwins wrote:
>
> 1. The display should show the jivelite add-on. For the moment there is
> only the boot screen. If I connect a HDMI Display it will show the
> jivelite output.
>
nice setup. i cant help sorry with #1
on my setup the hdmi will show the pi boot and then stops at a login
38 matches
Mail list logo
