Re: IP address to use for consoleproxy.url.domain

address the domain should point to. > > > > For what it's worth, I'm currently working on a private cloud setup for > > testing before I change to public setup later > > > > Thanks in advance. > > -- Stephan Seitz Planufer 92a, 10967 Berlin, Germany Mobile: +49 (0) 151 458 414 45

Re: Multiple RADOS monitor IPs to add RBD Primary Storage

The last time i've looked up this issue, it was proposed to use DNS round-robin, aka add every monitor-IP as A-Record to your monitor- alias and refer to it by name. Not, that I like that solution, since it adds up another dependency to DNS, but that's how we run it since a few years ;) And no,

AW: Very slow SSL-enabled console proxy

console proxy > Fariborz Navidan hat am 10. September 2018 um 08:44 > geschrieben: > > > Please provide me commands to run on CPVM to check this. > > Thanks > > On Mon, Sep 10, 2018 at 11:00 AM Stephan Seitz wrote: > > > > > I'ld check the ava

AW: Very slow SSL-enabled console proxy

I'ld check the available entropy inside the console proxy vm. If the entropy pool is running low, you could install haveged as a gathering daemon. � Originalnachricht � Von: Fariborz Navidan Gesendet: Montag, 10. September 2018 08:14 An: users@cloudstack.apache.org Antwort an:

Re: _configDao.isPremium() please help where this information comes from.

rty file of > cloudstack-plugin-hypervisor-vmware. > Most likely you are using a system build with noredist. > In that case you also need a systemvm build that way. > > Kind Regards, > Frank > > On Tue, Jul 10, 2018 at 12:16 PM Stephan Seitz > wrote: > > >

_configDao.isPremium() please help where this information comes from.

eal source of  com.cloud.configuration.dao.ConfigurationDao#isPremium() and how to set this to false. If anyone could shed some light? Thank You! Mit freundlichen Grüßen, Stephan Seitz -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin https://www.heinlein-support.de Tel: 030 / 405051-44 Fax: 030 /

Re: Unable to get a storage network ip addess

not found: com.cloud.storage.resource.PremiumSecondaryStorageResource due to: java.lang.ClassNotFoundException: com.cloud.storage.resource.PremiumSecondaryStorageResource Looks like that class is only referenced around VMware (which we don't use). If anyone has a quick solution, that'ld be great. Am Montag, den 09.07.2018, 10:05 +0200 schrieb Ste

Unable to get a storage network ip addess

I can clean that up. Thanks in advance! Mit freundlichen Grüßen, Stephan Seitz -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin https://www.heinlein-support.de Tel: 030 / 405051-44 Fax: 030 / 405051-19 Amtsgericht Berlin-Charlottenburg - HRB 93818 B Geschäftsführer: Peer Hei

Re: Current cloudstack prebuilt images wrong VR address

tion from correct VR endpoint. > > I suppose there is the error in the current CentOS template. Maybe, someone > who has built them assumes that default GW is always VR which it may be > true sometimes (advanced zones, I suppose), but not in general (I use Basic > Zone). > >

Interesting behaviour with OS Type CentOS / RAM over commitment / dynamic scalability

We double checked that issue on two diferent clusters with the very same result, but didn't dug too deep into kernelspace to find a reason. By now, we're happy to solve that by just changing the OS Type. Mit freundlichen Grüßen, Stephan Seitz -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119

Re: DB Communication Link Failure

ontains 548 entries, should be > 542. > error: Corrupt > > Now, i supposed i have to delete the entries > > Nicolas Bouige > DIMSI > cloud.dimsi.fr<http://www.cloud.dimsi.fr> > 4, avenue Laurent Cely > Tour d’Asnière – 92600 Asnière sur Seine > T/ +33 (0

Re: DB Communication Link Failure

Here log from mysqld.log : > > > > > > > > he manual page at http://dev.mysql.com/doc/mysql/en/crashing.html > > > > contains information that should help you find out what is causing > > the > > > crash. > > > > 180613

Ceph Meetup Berlin - Topic High Available (active/active) NFS and CIFS Exports upon CephFS

Hi! If you happen to be in Berlin at May 28th., you might want to take a look at this meetup: https://www.meetup.com/de-DE/Ceph-Berlin/events/qbpxrhyxhblc/ Maybe a redundant, ceph-backed NFS could be useful not only for 2nd. storage :) - Stephan signature.asc Description: This is a

Session Timeout 4.11 / jetty

Hi! Finally, I was able to modify the session timeout of gui users since the default of 30 minutes was unconvenient. I did two changes (currently not knowing which one takes effect :) ) a) /etc/cloudstack/management/server.properties server.session.timeout=3600 #session.timeout=3600 # this

AW: Moving VR to another pool

Hi sven, As far.as i can remember from our workflow a few month ago,‎ we've added a matching Storage tag to the systemtemplate offering and subsequently simply destroyed the running VR waiting for them to spawn on the new cluster. If you're running systemvms on local Storage i assume

AW: Community opinion regarding Apache events banner in CloudStack's website

I"ld second Dag and Swen. So +1 for the third option Gesendet von meinem BlackBerry 10-Smartphone.   Originalnachricht   Von: Swen - swen.io Gesendet: Dienstag, 17. April 2018 20:44 An: users@cloudstack.apache.org Antwort an: users@cloudstack.apache.org Betreff: AW: Community opinion regarding

Re: Egress rules not applied in 4.11.0

d :) ) run in HVM. - Stephan Am Mittwoch, den 11.04.2018, 09:09 -0300 schrieb Rafael Weingärtner: > That is interesting. The VM is indeed in HVM mode. > > On Wed, Apr 11, 2018 at 9:04 AM, Stephan Seitz <s.se...@heinlein-support.de> > wrote: > > > > > # xe

Re: Egress rules not applied in 4.11.0

content of these parameters? > >    - PV-legacy-args >    - PV-bootloader >    - PV-bootloader-args >    - HVM-boot-policy >    - HVM-boot-params >    - HVM-shadow-multiplier > > > It is just to make sure that the VM was indeed created using HVM mode. > > O

Re: Egress rules not applied in 4.11.0

Just tried a Debian 9 running on XenServer 6.5 SP1 with model "Other 2.6x Linux (64-bit)": # virt-what --version 1.15 # virt-what hyperv xen xen-domU # Am Mittwoch, den 11.04.2018, 13:50 +0200 schrieb Stephan Seitz: > AFAIK not for 6.5 SP1. > https://xen-orchestra.com/blog/melt

Re: Egress rules not applied in 4.11.0

tualized guests. Didn't XenServer > make some kind of change around this as a Meltdown/Spectre migation?  > > > Kind regards, > > Paul Angus > > paul.an...@shapeblue.com  > www.shapeblue.com > 53 Chandos Place, Covent Garden, London  WC2N 4HSUK > @shapeblue >    &

Re: Egress rules not applied in 4.11.0

i! > > > > > > I upgraded my test cluster from 4.9 to 4.11. The default policy for > > > isolated networks is "Deny". > > > > > > But now, adding rules to allow egress traffic are not applied to the > > > virtual router. adding a 0.0.0.0/0 rule loo

Re: [DISCUSS] CloudMonkey 6.0.0-alpha (about six years after initial version in 2012)

ds/option. > > > > - Improve how maps are passed. > > > > - Good to have: bash/zsh completion. > > > > > > Please share your thoughts, and objections (especially if you're using the > > proposed features to be removed in version 6.x). > > > >

4.11.0.0 SSL offloading on Isolated Net (redundant VR setup) not supported?

Hi! After managed to inject sslcerts, I'm facing the Problem that my Network says: "Ssl termination not supported by the loadbalancer" Is there any Capability I could add via NetworkOfferings to get SSL Offloading working?   "accountid": "4b14365a-5c6f-11e5-a590-3400a30d0aba",   "cmd":

Re: Egress rules not applied in 4.11.0

Hi! I think your facing a bug already discussed here. After reloading (imho doesn't matter if you check "clean up") the network, the egress rules are applied. So just reload every net with egress rules :) Oh and don't know if that made it already to  https://github.com/apache/cloudstack/issues 

uploadSslCert

Hi! I'm currently trying to use uploadSslCert (  https://cloudstack.apache.org/api/apidocs-4.11/apis/uploadSslCert.html ) via cloudmonkey. I'm running into different kinds of errors. ( / 503) ( 500 "None"), Parsing Errors on Cert/Key (the message isn't clear on which part though) The

Re: Upgrade CloudStack from 4.9.2.0 to 4.11.0

Hi! We're currently using XenServer instead of VMware, so I just don't know if you really need to build your own packages. Afaik shapeblue's public repository has been built with noredist. Here's short list (sorry, we didn't report everything to the bugtracker by now) of caveats: * There's a

Re: systemvm

Hu! I'ld recommend to log in to your ssvm and check if everything is able to connect. I second dag's suggestion to double check your network setup. Inside your ssvm I'ld run /usr/local/cloud/systemvm/ssvm-check.sh also ip a s ip r s As an educated guess: did you setup your storage-network

Re: 4.11.0.0 problem adding new shared network NIC to VM "A NIC with this MAC address exits for network:"

Ilya, thank's for your reply, I've opened CLOUDSTACK-10350. Am Dienstag, den 03.04.2018, 09:20 + schrieb ilya musayev: > Stephan > > Please kindly open a jira issue as a blocker for 4.11 > > Thank you > signature.asc Description: This is a digitally signed message part

4.11.0.0 problem adding new shared network NIC to VM "A NIC with this MAC address exits for network:"

andle null as MAC, but doesn't get called at all if  _nicDao.findByNetworkIdAndMacAddress(networkId, macAddress) results != null if macAddress is null. Sorry, if I'm wrong, didn't had decent IDE at hand :) Cheers, Stephan Seitz -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Be

Re: How to generate API key for user

maybe this is trivial question but unfortunately can't find how to generate > API key/secret for user. Navigate to Accounts -> YOUR_ACCOUNT -> "View Users" (on the right) -> YOUR_USER -> "Generate Keys" (a square symbol)

Re: Now that Oracle is collecting for the use of Java, should we worry?

Hi! > I read in the news Oracle is collecting from companies using Java > libraries > in commercial uses, since Cloudstack uses Java for its operations, > should > we worry about it? Just to avoid FUD about that news. Oracle had always licensed Java Enterprise Features (Flight Recorder, Mission

advanced zone, shared network, VR sometimes looses default gateway definition

Hi, I wonder if someone else faced this issue. We're running acs 4.9.0 w/ advanced zone. Sometimes, the VR (dnsmasq) looses it's gateway (dhcp option 3) and subsequently offers itself as the default gateway. VR's /etc/dnsmasq.conf shows dhcp-option=option:router,REDACTED_AND_CORRECT_GATEWAY

Re: Link Domain to LDAP

Hi, I'ld verify the settings via mysql mysql> select * from ldap_configuration \G *** 1. row ***   id: 2 hostname: YOUR_LDAP_SERVER port: 636 also check, if you're able to resolve the hostname and connect to it from your management host.

Re: Adding an ISO to Cloudstack but missing download ISO button

Maybe you're exporting the content of your secondary storage via NFS consolidated on your managemenent host.  But you should also have an SSVM running which mounts your share and manages downloads etc. As Sergey already mentioned, login to that SSVM and check the network connectivity from inside

Re: Lost vhd file in cloudstack

Hi, if you take a look into the mysql cloud.volumes table, you should find uuid-strings in the path-field. At least for XenServer lvmohba Storages you should find that uuid as part of the lv-name (VHD-[uuid]) cheers, - Stephan Am Samstag, den 08.10.2016, 09:19 + schrieb

Re: Cloudstack management server changing msid

’m going to set the hwaddress as you suggest to keep the bond MAC > from changing. > > Should I mark the “old” msids removed? > > thank you! > > > > > > > On Oct 7, 2016, at 12:51 AM, Stephan Seitz <s.seitz@secretresearchf > > acilit

Re: Cloudstack management server changing msid

Hi Carlos, we encountered the same issue after introducing nic-bonding on the management net which changed the MAC. The msid includes the MAC of the interface which has the service_ip bound to. If that MAC changes, your management node encounters an identity crisis ;) We solved that, by

Re: configdrive in ACS

Hi Jayapal, out of curiosity, i just tried that. It just shows "Unable to deploy VM as template 471 is password enabled, but there is no support for UserData service in the default network 232" cheers, - Stephan Am Donnerstag, den 15.09.2016, 14:48 +0530 schrieb Jayapal Reddy: > Hi, > >

Re: two XenServer Pools on the same primary Storage?

o answer your question – using the same LUN on multiple > clusters is pretty much guaranteed to cause you problems – most > likely data corruption and complete loss of data.  > > Regards, > Dag Sonstebo > Cloud Architect > ShapeBlue > > On 09/09/2016, 14:24, &quo

two XenServer Pools on the same primary Storage?

Hi! I've recently expanded our XenServer Pool and had to notice that E5- 2630 v2 are far different from E5-2630 v4. Due to Dell's R630 BIOS i'm unable to use Intel FlexMigration. So I'ld loose the live-migration feature. Anyway. I'ld start introducing a new XenServer Pool (ACS Cluster) with that

Re: Adding Hosts to XenCenter Pool

Am Mittwoch, den 07.09.2016, 22:57 + schrieb Jeremy Peterson: > So I am running XenCenter and I am trying to create a second pool to > add hosts to but when I join the pool the errors are coming up > > The server joining the pool must have a physical management > NIC  (i.e. the management NIC

Re: cloudstack-usage no longer working / error saving account to cloud_usage db

Hi Rohit, thanks! Having a recent DB backup at hand and only based on guesses, I did some further experiments yesterday :) - Rerun /usr/share/cloudstack-common/scripts/util/migrate- dynamicroles.py - Checked cloudstack-usage 4.8.0.1 instead of 4.9 - Updated back to cloudstack-usage 4.9 ... and

Re: Console Issue

Hi, there has been a bug report and a fix was submitted. It's been fixed at least in 4.9 (you need to destroy your existing consoleproxy if you're running an older one). If you want to "hotfix" it, just login to your consoleproxy find ajaxviewer.js somewhere in /usr/local/cloud and add

Re: Fresh 4.9 Install

Hi, some less terse log excerpt would be really helpful. Could you paste the relevant parts of /var/log/cloudstack/management/management- server.log? Anyway, did you follow the installation instructions? http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4

Re: Debian 8.5 template

Hi, you should remove /etc/ssh/*{_key,_key.pub} as one of the final steps of template creation. I'm currently not sure if debian's openssh-server init automatically regenerates the server keys. If not a (to be written) "first-boot' init should call dpkg-reconfigure openssh-server to get the keys

Re: Primary storage calculation

Hi, since your lvm shows duplicate pv's I assume the filter in your lvm.conf isn't set correct. This could also explain the listing of (xenserver unrelated) vg_srv1/lv_* due to nested lvm. btw. I'ld rather use something like vhd-util scan -f -m "VHD-*" -l VG_XenStorage-3e26eaad-befd-fb47-82ad-

Granular Access Controls in CloudStack

Hi! We've recently updated our testing environment to acs 4.9. As there's a new RBAC model, I'm trying to use it. Unfortunately I'm unable to "activate" it. I've tried to set dynamic.apichecker.enabled to true, but this is prohibited via UI. Changing the respective database entry doesn't help

Re: Overprovising CPU with XenServer 6.5SP1

Hi cpu overprovision factor is only recalculated for vms started *after* the factor has been changed. The more vms you're going to stop/start, the more accurate your calculation is getting. Please refer to http://docs.cloudstack.apache.org/projects/cloudstack-a

Re: Xenserver 7 w/ ACS 4.8

XenServer 7 it doesn't work > > Regards > Glenn >   >   > glenn.wag...@shapeblue.com  > www.shapeblue.com > First Floor, Victoria Centre, 7 Victoria Street, Somerset West, Cape > Town  7129South Africa > @shapeblue >    >   > > >

Xenserver 7 w/ ACS 4.8

Hi! I'm just curious if ACS 4.8 can handle Xenserver 7. I havn't found any related topics, so I'ld like to ask if anyone has already tried it? Thanks! - Stephan

problem with ldap authentication w/ grouOfNames

Hi guys! We've currently setup acs 4.8 and trying to integrate the authentication for different domains with different kind of grouOfNames using openldap. Users are getting imported, but are unable to authenticate with following log: 2016-07-22 16:10:50,523 INFO  [o.a.c.l.LdapContextFactory]

Re: cs 4.5.1, hosts stuck in disconnected status

> We use CS 4.5.1 on a 3 Clusters with XenServer 6.5. > > One Host in a cluster (and another in another cluster as well) got > and  > stayed in status "Disconnected". use xe host-list to determine your disconnected hosts-uuid, and try to enable it via xe host-enable uuid=NN If the host is

Re: Opportunity to contribute in Apache CloudStack

I'ld also vote that ;) I could imagine some kind of "business portal" not only to get metrics but also pricings and SLAs. cheers, - Stephan Am Freitag, den 08.07.2016, 09:09 + schrieb Rashmi Dixit: > An idea off the top of my head - we do not have any user interface > for usage. Perhaps

Re: CloudStack Design: Ceph and local storage

Hi! Independently from cloudstack, I'ld strongly recommend to not use ceph and hypervisors on the very same machines. If you just want to build a POC this is fine, but If you put load on it, you'll see unpredictible behavior (at least on the ceph side) due to heavy I/O demands. Ceph recommends at

Re: Best NIC for XenServer?

Hi, XS 6.5 is built around CentOS 5 with a custom 3.10 Kernel. Using bonded X540-AT2 NIC, I can't see any problems. Depending on your network setup, your bond might be created and managed by OVS instead of Kernel. Just a guess, but OVS runs in userspace and could be affected by Dom0 RAM shortage

ACS 4.8.0 Snapshots / Unable to locate datastore with id 1

Hi! A few days ago we've finally migrated two Primary Storages. Internally, these PR were numbered 1 and 2. Everything works as expected with the new SRs, except Snapshots seems to reference to the removed ones. (admin)  > list snapshots listall=true  Error 530: Unable to locate datastore with

Storage Tags for System Services / SSVM etc..

Hi! We're currently migrating Storages and only the Virtual Routers, Console Proxy and Secondary Storage VM are left on our old Storage. Since we want to get rid of that Storage, I need a way for provisioning the System VMs to the new Storage. Using ACS 4.8.0 with XenServer 6.5, I've done

Re: Storagemigration / Primary Storages

se make sure that there are no issues > with volume migrations. > > Best Regards, > Sanjeev N > Chief Product Engineer, Accelerite > Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com  > > > -----Original Message- > From: Stephan Seitz [mailto:s.se...@secretresea

Storagemigration / Primary Storages

Hi! We're currently migrating volumes from one to another storage with the goal to get the source LUN freed to finally remove the whole storage. This runs w/ ACS 4.8 and XenServer 6.5 with attached FC-Storages. Interestingly, the free space not only decreases (as expected) on the target LUN.

Re: Solaris 11.3 can not be installed

> using the official Oracle iso (text install), but installation is not > continuing when I hit F2 to install on local storage. It seems that > it is not able to discover the local disk and as a result, it returns > back to the installation menu and prompts me the error “disk_link: > invalid disk

Re: Password reset, not work after adding new Guest IP Class

Hi! Did you add two networks with dhcp? what shows your guests routing table? obviously two default gateways? did you check if your virtual router is reachable from within the guest? Am Freitag, den 25.03.2016, 15:18 +0200 schrieb Cristian Ciobanu: > Hello, > > Looks like after adding a

Re: CentOS 7 Template for ACS

Christian, we reworked the password / sshkey scripts, as well as some network magic also for CentOS 7. https://github.com/HeinleinSupport/acs-template-scripts By now, we're wrapping systemd around somewhat "normal" init-scripts, but that works as expected. cheers, - Stephan Am Donnerstag,

Re: glibc vulnerable (CVE-2015-7547)

> is the latest system vm template vulnerable to CVE-2015-7547 > (https://security-tracker.debian.org/tracker/CVE-2015-7547)? > I cannot find anything about it in the mailinglist and/or CS page. If you ssh into the system-VMs, you'll find the vulnurable version of libc. to mitigate this, we've

Re: HTTPS for console VM, without the wildcard DNS

Hi, well, one could manage huge hosts-files ;) but seriously, you just need a dns-name / wildcard-certificate for a domain you trust. If your customers trust your certificate AND your dns - maybe because of dnssec - you don't need that for every customer. To keep things off our full-featured

Re: Procedure for Linux templates

e > executed on VM after script file's are copied on VM. > > I don't see any information, is like only copy the files and execute > newtemplate.sh. > > Regards, > Cristian > On 19.02.2016 13:19:47, Stephan Seitz <s.se...@secretresearchfacility.com> > wro

Re: Procedure for Linux templates

projects, so I'ld expect more to come ;) cheers and have a nice weekend! - Stephan Am Donnerstag, den 18.02.2016, 22:13 +0200 schrieb Cristian Ciobanu: > Hello, > > Nice to hear this, i will wait for updates. > > > Regards, > Cristian > On 18.02.2016 19:19

Re: Procedure for Linux templates

Hi, we've recently built templates for Centos 7, Ubuntu 14.04, Debian 8 and SuSE Leap 42.1. We tried to do our work as near as possible to the respective default networking. So CentOS 7 w/ NM and SuSE Leap with wicked (which caused a lot of pain to get it working...) We're just sorting out our

Re: [update] ACS management unable to connect to xenserver hosts after reboot

ions expressed are solely those of the author and do > not necessarily represent those of Shape Blue Ltd or related > companies. If you are not the intended recipient of this email, you > must neither take any action based upon its contents, nor copy or show > it to

[update] ACS management unable to connect to xenserver hosts after reboot

/SftVJCs4 Maybe someone knows how to resolve this? To me it looks like our single management-host has some kind of identity crisis? Am Dienstag, den 16.02.2016, 15:12 +0100 schrieb Stephan Seitz: > Hi acs gurus! > > We're currently facing a really strange problem after two somewhat

ACS management unable to connect to xenserver hosts after reboot

Hi acs gurus! We're currently facing a really strange problem after two somewhat simple steps. 1. Reboot Management-Node (well there is also a 2nd. NFS-Storage located) 2. Upgrade 4.7.0 to 4.7.1 Both steps seemed successful and running, but after a few days I've noticed the SSVM in "running, not

current state of IPv6 in 4.6 VR / 4.7

Hi! I'm currently trying to add dualstack (ipv4 + ipv6) shared networks to one of our infrastructures. It's running 4.7 w/ latest 4.6 VR on VLAN-based advanced Networking w/ XenServer 6.5. The documentation [1] says "Use the System VM template exclusively designed to support IPv6. Download the

Re: associate specific public ip to isolated network

s table swap the 'public_ip_address' column of IP1 and > IP2. > > Now IP2 is assigned to network and IP1 is free. > > Thanks, > Jayapal > > On Tue, Dec 15, 2015 at 8:58 PM, Stephan Seitz < > s.se...@secretresearchfacility.com> wrote: > > > hi there! > > > &g

associate specific public ip to isolated network

hi there! is it possible to associate a specific, given IP to an isolated network? purpuse is, re-build a network with different offering that needs to use the very same ip addresses than the one currently running (meant to get destroyed). thanks!

Re: How to replace Primary Storage

Am Montag, den 07.12.2015, 11:04 + schrieb Abhinandan Prateek: > Live migration across primary storages is not supported by cloudstack. Abhinandan, afaik, this is wrong. I've done that w/ acs 4.5 and xenserver 6.5. cheers, Stephan

Re: [poll] cloudstack exam

> Quick poll: has anybody here taken the ACCEL cloudstack certification > exam ? what did you think ? Too hard, too easy ? – about right ? Well, I signed the usual NDA at pearson vue, so I shouldn't answer in detail :) The exam covered a lot of aspects around ACS, in my opinion well balanced. I

upgrading 4.5.2 -> 4.6.0 virtualrouter upgrade timeout

Hi List! After upgrading from 4.5.2 to 4.6.0 I faced a problem with one virtualrouter. This particular VR has about 10 IPs w/ LB and FW rules defined. During the upgrade process, and after about 4-5 minutes a watchdog kicks in and kills the respective VR due to no response. So far I didn't find

Re: upgrading 4.5.2 -> 4.6.0 virtualrouter upgrade timeout

uced with the update or the particular VR just has simply not been restarted after getting configured with lots of ips and rules. Am Dienstag, den 24.11.2015, 12:29 +0100 schrieb Stephan Seitz: > Hi List! > > After upgrading from 4.5.2 to 4.6.0 I faced a problem with one > virtualrout

Re: [DISCUSS] ACS 4.5.3 release

Hi Rohit, I've reported one Bug[1], that affects the network.throttling.rate. I assume, this is just some bad calculation. Maybe this could be fixed for 4.5.3? :) [1] https://issues.apache.org/jira/browse/CLOUDSTACK-8936 Am Freitag, den 20.11.2015, 06:27 + schrieb Rohit Yadav: > Hi all,

Re: [RFC] Metrics views for CloudStack UI

This looks really great! You've added the metrics view at the Infrastructure tab. This is nice for the platform ops. I assume the very same metrics would also be a benefit for domain-admins (say: customers). I'ld suggest to add this view somewhere below the Instances tab. cheers, - Stephan Am

problem assigning an instance to a different account in a different domain

Hi! I'm trying to assign instances to a different account in a different domain. Currently with no success. The particular instances have been deployed by the initial "admin" account in the ROOT domain, and should be assigned to a domain-admin account. id = 0d7a4ee7-5c6f-11e5-a590-3400a30d0aba

Re: [ANNOUNCE] CloudStack Certification !!!!

Today I did the exam at a pearson vue testcenter. I registered via http://www.pearsonvue.com/accel/ The exam is - as far as I can tell - not visible on cs.lpi.org. Am Freitag, den 30.10.2015, 21:51 +0100 schrieb Erik Weber: > My local test center can't find the exam, has anyone else had any

Re: Cloudstack - Monitoring

We've added our acs infrastructure into our checkMK monitoring using the agents (for XS we've installed the CentOS rpm's) as well as SNMP. Works reliable except we haven't written any checks for VM metrics so far. Am Freitag, den 16.10.2015, 21:25 + schrieb Jeremy Peterson: > We are looking

Re: InsufficientServerCapacityException - Fresh install CS 4.5.2 - Xenserver 6.5

Not exactly, but I've learned on 4.5.2 / XS 6.5 that InsufficientServerCapacityException is raised if an ISO is broken. I didn't took a deeper look, but on XS sr-scan also fails. I assume this could lead to inaccessability of any ISO (or the secondary storage at all?) Don't know if it's related

Re: Doubt about xen-pv-drv-iso

Hi, > Can someone out there that has an ACS environment with Xenserver hosts try > to plug the xen-pv-drv-iso into an instance and try to use it? I mean, try > to mount and list the contents of that ISO. Did that work for you? yap. this iso works as expected. root@template:~# mount /dev/cdrom

Re: blacklist IP addresses?

ooking into IPv6 > probably over the next period and we can always mark it unvalid or won't > fix if needed. > > thanks, > > On Tue, Sep 29, 2015 at 5:40 PM, Stephan Seitz < > s.se...@secretresearchfacility.com> wrote: > > > Hi, > > > > we're currentl

Re: blacklist IP addresses?

ot sure how it works exactly but I think what you want > > is > > not provided. Can you add a jira ticket for it? I will be looking into > > IPv6 > > probably over the next period and we can always mark it unvalid or > > won't > > fix if needed. > > > > thanks, &

blacklist IP addresses?

Hi, we're currently adding IPv6 to some of our networks. Due to a design decision we made to some part of our infrastructure to keep it HA, we need to blacklist some particular addresses in the provided space. Is it possible to "blacklist" a few addresses, so the VR's dhcp6 won't provide them?

Re: Deployment failed on XenServer due to capacity miscalculation

Hi there, despite not reading the whole thread, I'ld assume that there's simple no single memory segment of the requested size available at your particular xenserver. Just keep in mind, that Xen partitions memory and - after long run - could not assign a contiguous block, even if the sum of all

Re: CoreOS images http://dl.openvm.eu/

Hi Nux! As nice as your openvm templates are, I'ld resist and build our very own images - just to be 100% sure to only have selected software from trusted repositories. Using externally built images/templates/containers is a general no-go for all production infrastructures I know. cheers,

Re: Console keyboard improvements

Hi Erik, I'ld like to move in, but for the need of a german layout. Maybe we can join forces :) cheers, - Stephan Am Dienstag, den 23.06.2015, 12:24 +0200 schrieb Erik Weber: Hi, I am guessing there are more than me that's having trouble with keyboard with non-us layouts. I'd like to

Re: Console keyboard improvements

Hi Erik, I found following link[1] useful do build a modified virtual router systemvm. I assume the very same process can be used for the console-vm. You can upload your own template to ACS and define it in the settings area via consoleproxy.system.offering [1]

Re: Access root disk after botched upgrade

Hi, on XenServer I'ld expect your SR containing *.vhd files. You could use the cli xe command to determine which file is attached. Maybe this info can also be seen in the gui. Here's a short walkthrough, how to access vhd files:

Re: best way to patch or modify systemvm (routervm)

Thanks anyway. I'll post my results if it works :) Am Mittwoch, den 17.06.2015, 12:00 +0200 schrieb Erik Weber: There's multiple parts involved. You have the actual system vm template, the systemvm.iso, and remote ssh functions. I am a bit into deep water right now, but I *think* some of

Re: best way to patch or modify systemvm (routervm)

it as 'routing' and set the global config option for routers to the new template. Erik Den tirsdag 16. juni 2015 skrev Stephan Seitz s.se...@secretresearchfacility.com følgende: Hi there, we'ld like to connect to virtualrouters[1] via l2tp/ipsec vpn. In general, this works as expected

best way to patch or modify systemvm (routervm)

Hi there, we'ld like to connect to virtualrouters[1] via l2tp/ipsec vpn. In general, this works as expected, except vpn-clients are unable to use the virtualrouter as DNS-Server (which is correctly propagated to the vpn-clients). Inside the VR, /etc/dnsmasq.conf shows interface=eth0

acs 4.4.2 / wrong gateway in VirtualRouter

Hi all, In an advanced zone, I've configured the following IP range for the system public Label on VLAN Id 62. Gateway | Netmask | VLAN | Start-IP | End-IP 10.241.62.1 | 255.255.255.192 | vlan://62 | 10.241.62.10 | 10.241.62.62 Additionally, I've added Guest, shared

Re: Major breakage in GUI after upgrade from 4.3.2 to 4.4.2

. Thanks Andrei - Original Message - From: Stephan Seitz s.se...@secretresearchfacility.com To: users@cloudstack.apache.org Sent: Monday, 2 February, 2015 2:48:33 PM Subject: Re: Major breakage in GUI after upgrade from 4.3.2 to 4.4.2 Hi, one GUI issue I found so far

Re: Major breakage in GUI after upgrade from 4.3.2 to 4.4.2

Hi, one GUI issue I found so far in 4.4.2 is a misplaced apply-button if you edit the details of templates. This seems browser-dependent, on firefox it somehow works, on chromium the button is completely invisible. If you're unable to start any VM, I assume you didn't install the updated

Re: cloudmonkey / deploy virtualmachine from ISO

Hi, Am Dienstag, den 27.01.2015, 23:40 +0100 schrieb Rene Moser: Hi On 01/27/2015 05:30 PM, Stephan Seitz wrote: Hi there, The logfile states, that the HyperVisorType does not match my running cluster. Interestingly, It works, If I deploy the very same machine via GUI. The ISO

Re: booting instances via pxe/tftp

Erik, I've used the iPXE iso to boot successfully multiple times. Requires nothing on the hypervisor as far as I know, but I don't know how it works after you have an OS installed (I'm using it to bootstrap machines). thank's for your reply! This is exactly what I was looking for. After

  1   2   >